1. No category

Bow Tie Wedding SVG Set
de
i
u
G
ct
Proje
www.dcipollodesigns.com
Introduction
This wedding stationary set has a traditional and elegant design in the popular layered style, using several layers of your favorite
patterned paper. A touch of whimsey is added with the 3D bow tie design element repeated on each item in the set. We will use
the Silhouette Print and Cut feature to add a personal message in your favorite font, color and style.
The set includes a 5 x 7 inches invitation, 5 x 3.5 inches RSVP card, 5.5 x 5.5 inches Save the Date card, 3.5 x 2 inches place
card, 3 x 2 inches (folded) triangular gift box and a 5 x 3.5 inches (folded) thank you card. The thank you card can also be used
as the bride’s personal note card.
6
8
10
Invitation
12
13
Place Card
Gs
SV
2
RSVP Card
15
Thank You Card
The Bow Tie Wedding SVG Set
dCipolloDesigns.com
Our SVG cut files are compatible with Silhouette Studio® Designer Edition.
Save the Date
Favor Box
DO NOT ALLOW CHILDREN TO COMPLETE
PROJECTS ALONE. ADULT SUPERVISION REQUIRE.
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
wwwSilhouette
Tutorials
Getting Started
If you are new to using your Silhouette and SVG cutting files, these tutorials will teach the basics of
how to use SVG files in the Silhouette Studio Designer Edition software.
e
lin ls
n
O ria
o
Tut
Silhouette Studio Designer Edition Software How-Tos
• How to set the Silhouette blade to cut your favorite paper or media
• How to make a regular cut with your Silhouette
http://www.bellaonline.com/articles/art182666.asp
Using SVG Cut Files in Silhouette Studio Designer Edition
• Setting your Silhouette to use SVG cut files
• How to open SVG cut files in Silhouette
• How to scale SVG cut files in Silhouette
http://www.bellaonline.com/articles/art182665.asp
How to Add Text to Silhouette Print and Cut Design
• How to add text to your design in Silhouette
• How to Print and Cut in Silhouette
http://www.bellaonline.com/articles/art182657.asp
Our SVG cut files are compatible with Silhouette Studio® Designer Edition.
3
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Project SVG Cut Files
Below are thumbnails for each of the SVG cutting files included in the download zip file.
Patterned Paper 1
Patterned Paper 2
Black
White
Patterned Paper 3
dC_Ribbon1.svg
5 x 1 inches
dC_InvTopBase.svg
5 x 2.35 inches
dC_InvBase.svg
5 x 7 inches
dC_BowTie1.svg
6 x 2.80 inches
dC_PlacecardTxtBase.svg
1.25 x 2 inches
dC_Ribbon2.svg
5 x .5 inches
dC_MessageBase2.svg
4.2 x 4 inches
dC_MessageBase4.svg
2.8 x 3 inches
dC_MessageBase1.svg
4.40 x 4.20 inches
dC_RSVPBase.svg
5 x 3.5 inches
dC_ThankyouBase.svg
5 x 7 inches, center fold line
4
dC_MessageBase3.svg
3 x 3.2 inches
dC_TriBox.svg
3 x .2 inches
Patterned Paper 4
dC_MessageBase5.svg
7.80 x 4 inches
dC_PlacecardBase.svg
3.5 x 2 inches
dC_SaveBase.svg
5.5 x 5.5 inches
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Bow Tie - Cut and Assemble
The bow tie is the main design element on all six of the items in the wedding stationary. Below are the instructions for cutting and
assembling the bow tie. Although the instructions are the same, you will need to cut the pieces for the bow tie at a different scale for each
item in the set. For the bow tie, you will want to load solid black card stock (or the color of your choice) in to the cutting machine. There
are three pieces to the bow tie; the bow, the ends and the knot.
1. Open the dC_BowTie1.svg file in to
Silhouette and cut the bow tie pieces to
scale as directed in the instructions for each
item in the set.
1
3
4
2. The largest piece of the bow has four
sections. The two inner sections (with the
holes) are the front sections of the bow.
The two outer sections (no holes) are the
bottom of the bow. Turn over the bow and
fold both outer sections to the back and
glue the small tabs together at the center
tab.
3. Glue the bow on to the top of the ends
section.
4. Finally, glue the knot piece to the top
center of the bow.
2
5
5. Gently open the bow for a 3D effect.
6. Glue the completed bow tie in place as
directed for each item in the set.
5
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Wedding Invitation
Instructions
This invitation card is a flat 5 x 7
inches, non-fold card, which would
look great with a black envelope. It
requires three patterned papers, as well
as solid black and white card stock.
Supplies:
Choose 3 patterned papers
Black and white card stock
1. The paper for the base of the card
will be the largest pattern for the
design. The pattern on the reverse
side of this paper will be visible as
the back of the card.
2. The second patterned paper will be
the top section of the card.
3. Choose a third patterned paper for
the ribbon across the top of the
card.
4. The bow tie will be cut from solid
black card stock at 100% scale.
5. The message base will be cut from
solid white card stock.
6
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Cut & Assemble
ut
ing, c d
d
d
e
”w
car
ite tie sed white
h
w
“
l
s
forma rom embo
f
For a
e
ow ti
the b
.
stock
1. Load your paper for the base of the card in to the
Silhouette machine.
2. Open the dC_InvBase.svg file in to the Silhouette Studio
Designer Edition software and cut the card base.
3. Open the dC_InvTopBase.svg file in to Silhouette and cut
the top section of the card from your second patterned
paper. Glue this paper to the top of the card.
4. Choose a third patterned paper which will be the ribbon
behind the bow tie. Open the dC_Ribbon1.svg file and cut
the ribbon. Glue the ribbon to the vertical center of the
top section.
5. For the bow tie, you will want to load solid black paper (or
the color of your choice) in to the cutting machine. Open
the dC_BowTie1.svg file into Silhouette and cut the bow
7
tie pieces at 100% scale. Assemble and glue the bow tie to
the center of the ribbon.
6. Still using the black paper, open the dC_MessageBase1.svg
file in to the workspace. Cut the black message base that
will become the black border around the white message
base and glue it to the bottom section of the card base.
7. Next, we will use the Print and Cut feature to first print
the invitation message on white card stock and then cut the
message base shape. Open the dC_MessageBase2.svg file in
to the workspace. Add your message text to a new layer and
print on white card stock. In the Silhouette, turn off the
cutting for the text layer and cut the message base shape
layer. Glue in place on top of the black message base.
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Wedding RSVP Card
Instructions
This 5 x 3.5 inches RSVP card is fun
with the black polka dot patterned
paper. Who wouldn’t want to RSVP
“accept” with this card.
Supplies:
Choose 1 patterned paper
Black and white card stock
1. Choose a patterned paper for the
base of the card. The pattern on
the reverse side of this paper will be
visible as the back of the card.
2. We will use the Print and Cut
feature to print the RSVP message
text on white card stock and then
cut the message base shape.
3. The border around the message is
cut from black card stock.
4. The RSVP card uses a 70% scale
bow tie.
8
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Cut & Assemble
n
de a
u
l
c
e
n
i
t to envelop
e
g
r
’t fo
urn
.
Don ssed ret VP card
e
addr your RS
with
1. Load your patterned paper in to the Silhouette machine. Open the dC_RSVPBase.svg cut file in to Silhouette and cut the base of
the card.
2. Open the dC_MessageBase3.svg cut file and cut from black card stock. Glue the black message base, which will create the border,
on to the bottom center of the card.
3. Load white card stock into your printer and open the dC_MessageBase4.svg file in to Silhouette. On a new layer, add your text.
Use the Print and Cut feature to print your RSVP message and cut the white message base. When cutting the base, turn off cutting
for the text layer. Glue the white message base on to the top of the black message base.
4. Open the dC_BowTie1.svg file in to Silhouette. Select the entire image and scale to 70%. Using black card stock, cut the pieces
and assemble. Glue to the top of the RSVP card.
9
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Wedding Save the Date Card
Instructions
This card uses one two-sided
patterned paper, giving the card a
nice reverse side. The smaller 5.5
x 5.5 inches card can be pinned to
any corkboard or refrigerator.
Supplies:
Choose 1 patterned paper
Black and white card stock
1. Choose a patterned paper for
the base of the card. The pattern
on the reverse side of this paper
will be visible as the back of the
card.
2. We will use the Print and Cut
feature to print the message text
on white card stock and then
cut the message base shape.
3. This card uses the bow tie at
80% scale.
10
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Cut & Assemble
the
ave year
S
r
a
ou
nd y onths to
e
s
m
can
You card six edding
e
Dat e your w
r
befo
1. Open the dC_SaveBase.svg file in to Silhouette and cut from patterned paper.
2. Now, we will use the Print and Cut feature to first print the Save The Date message on the white message base and then cut the base shape.
Open the dC_MessageBase5.svg file in to Silhouette and turn on Registration Marks. Add a new layer and add the text for the Save The
Date message on this new layer. Select and position the text over the base, being careful to avoid placing text within the cut out areas (line
and small bow tie).
3. If the base does not fit within the Registration marks, we can rotate the base and text to fit. Select both base and text and rotate 90 degrees,
using the controls in the Rotate pane.
4. Print the message on white card stock, switch your paper to the Silhouette machine. Turn off cutting for the text layer and cut only the
base layer.
5. Glue the message on to the card base matching the bottom left and top right corners.
6. Open the dC_BowTie1.svg file and scale the image to 80%. Cut the bow tie pieces from black card stock and assemble. Glue in place at
the center of the thin cut out line above the Save The Date message.
11
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Because each 3.5 x 2 inches place card
will display the guest’s name and table
number, the paper for the base of the
place card should be white or a very
light pattern. Use a smaller piece of
detailed patterned paper to set off the
bow tie with a splash of texture.
Wedding Place Card
Instructions
Supplies:
Choose 1 patterned paper
Black and white card stock
1. You will need one patterned paper
that will cover 1.25 inches from the
left of the card.
2. We will use the Print and Cut
feature to add the guest’s name and
table number to the card.
3. The bow tie is scaled to 50%.
Make your own place card holders from artist wire.
1. Load the white base card stock in to your printer and open the dC_PlacecardBase.svg. On a new layer, add the guest’s name and table
number and position the text within the right two thirds of the base. Print and cut the message base. When cutting the base, turn off
cutting for the text layer.
2. Load the patterned paper on to the cutting mat and open the dC_PlacecardTxtBase.svg. Cut the patterned paper piece and glue to the
left side of the place card.
3. Open the dC_BowTie1.svg file and scale the image to 50%. Cut the bow tie pieces from black card stock and assemble. Rotate slightly
and glue in place at the top left corner of the place card.
12
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Wedding Thank You Card
Instructions
d
use
e
ob
s
l
n a as a d
a
C
ar
C
te
No
This 5 x 3.5 inches (when folded)
Thank You card can also be used as
the bride’s personal note card. For
writing a personal message inside each
card, choose a patterned paper for the
card base with a white reverse side. A
second option is to use a white insert
to cover the reverse side of a two-sided
patterned paper. This time we will
scale the bow tie to 60%.
13
Supplies:
Choose 2 patterned papers
Black card stock
White stationary paper (optional)
1. The paper for the base of the card will be the
main pattern for the design.
2. The second patterned paper is for the ribbon
across the card.
3. The bow tie will be cut from solid black card
stock.
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Cut & Assemble
the
ne to
o
t
s
e
rhin
tie
Add a of the bow g!
n
r
cente r some bli
o
f
knot
1. Open the dC_ThankyouBase.svg file in to Silhouette and cut from patterned paper. Fold the paper in half.
2. Now we will cut the ribbon from a second patterned paper. Open the dC_Ribbon2.svg in to Silhouette and cut. Glue the ribbon
two thirds of the way down from the top of the fold line.
3. Open the dC_BowTie1.svg file and scale the image to 60%. Cut the bow tie pieces from black paper and assemble. Rotate
slightly and glue in place about one third of the way from the left edge of the card.
4. If you are using an insert, use the dC_ThankyouBase.svg file to cut the insert from stationary paper. Glue the insert to the inside
of the card, just below the fold.
14
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Wedding Triangular Box
Instructions
The horizontal patterned paper used to
make this cute 3 x 2 inches triangular
box really accentuates the angles of the
box. Use a smaller piece of detailed
patterned paper to give the bow some
texture.
Supplies:
Choose 2 patterned papers
Sheer 1/8 inch ribbon
1. Use a light patterned paper for the
bow accent and a dark patterned
paper for the box. For a second
option, reverse the light and dark
papers.
d
k an h
c
i
u
t
q
x is n fill wi
o
b
e
little
. Th
This o make treat.
t
easy favorite
your
2. Thread the sheer 1/8 inch ribbon
through the holes and tie to closse
the box, after you fill it with sweets.
3. The bow tie is scaled to 60%.
15
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Cut & Assemble
Treat Suggestions: Caramel popcorn,
chocolates, mints, hot cocoa mix or cookies
1. Open the dC_TriBox.svg file in to Silhouette and cut from patterned paper. Fold along the five dashed fold lines. There is one
fold in the vertical center and two diagonal folds on each side of the center fold.
2. Open the dC_BowTie1.svg file and scale the image to 60%. Cut the bow tie pieces from patterned paper and assemble. Rotate
slightly and glue in place at the center on the side of the box.
3. You don’t want to glue the box together. With the four diagonal sides folded inward, match the small holes at the top. Thread
ribbon through the holes, fill the box with treats and close with the ribbon.
16
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Used in this project
Bazzill Basics Paper
Basics Licorice
I love this double-sided patterned paper for my Bow
Tie Wedding design, because of the rich black and
white color scheme that works so well with the 3D
bow tie. I used the Wallpaper, Little Dot, Ticking and
Big Dot patterns. Try other combinations to make
your very own statement.
Available in many online and retail stores
http://bazzillbasics.com/
17
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
Content copyright © 2014 by dCipollo Designs LLC, USA. All rights reserved.
www.dcipollodesigns.com
Notice of Rights: No part of this book or the digital files may be reproduced in any form or by any electronic or mechanical means including information storage and retrieval systems,
without permission in writing.
Personal Use License: This book and digital files are for personal use only and not for rerproduction or resale.
Limit of Liability / Disclaimer of Warranty: THIS BOOK AND DIGITAL FILES ARE PROVIDED WITHOUT WARRANTY OF ANY KIND, EXPRESSED, IMPLIED, OR
STATUTORY. WE DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The information in this book is distributed on an “As Is” basis, without warranty. The publisher and the author make no representations or warranties with respect to the accuracy
or completeness of the contents of this work and specifically disclaim all warranties, including without limitation warranties of fitness for a particular purpose. No warranty may be
created or extended by sales or promotional materials. The advice and strategies contained herein may not be suitable for every situation. This work is sold with the understanding
that the publisher is not engaged in rendering legal, accounting, app development or other professional services. If professional assistance is required, the services of a competent
professional person should be sought. Neither the publisher nor the author shall be liable for damages arising herefrom. The fact that an organization or Website is referred to in
this work as a citation and / or a potential source of further information does not mean that the author or the publisher endorses the information the organization or Website may
provide or recommendations it may make. Further, readers should be aware that Internet Websites listed in this work may have changed or disappeared between when this work was
written and when it is read.
dCipollo Designs LLC shall not be liable for damages resulting from the use of the book and / or digital files (the Software). The Licensee agrees to indemnify dCipollo Designs
LLC from any loss or damage incurred by dCipollo Designs LLC as a result of the Licensee’s use of the book and / or digital files (the Software). Please read the End User License
Agreement (dCipolloDesignsEULA.pdf ) included in the download file and posted on our website before using the book and / or digital files (the Software). All terms, conditions
and obligations of the End User License Agreement will be deemed to be accepted by the Licensee on the downloading of the book and / or digital files (the Software).
http://dianecipollo.com/legal/dCipolloDesignsEULA.pdf
All notices to Vendor: dcipollodesigns.com
Trademarks: All trademarks are the property of their respective owners.
First published: 2014
Cover image by Diane Cipollo
18
Content Copyright © 2014 dCipollo Designs LLC. All Rights Reserved
To see our latest SVG designs for your Silhouette® cutting machine visit our website.
dcipollodesigns.com