Examination Timetable Summer 2015 City & Guilds Principal Learning Units Timetable Notes 1. Starting times of examinations. Each examination must be taken on the day and at the time shown on the timetable. The published starting time of all examinations is either 9.00am or 1.30pm. Candidates taking more than one examination in a session should take these consecutively. A supervised break may be given between the examinations taken consecutively at the discretion of the centre. 2. Centres may start an examination up to 30 minutes before the published starting time without notifying City & Guilds. 3. Centres may delay the starting time of an examination within the scheduled session without notifying City & Guilds but candidates must be supervised from 9.30am for morning examinations or 2.00pm for afternoon examinations. 4. For information on any other timetable variations, please refer to the JCQ Instructions for conducting examinations or contact Exams Office Support. 5. Candidates must remain under supervision until 10.00am for morning examinations and 2.30pm for afternoon examinations. For examinations of less than one hour’s duration, candidates must remain under supervision for a period equal to the duration of the examination after the published starting time shown on the timetable. 6. Early information. Some components require the issue of question papers, stimulus material or other information in advance of the normal timetable period. Centres should check the specification for information on the material required by candidates. 7. Any reading time specified for an examination is included in the time specified. 8. Internally assessed units. Marks for all internally assessed units must be returned to City & Guilds by 29 May 2015. 9. Results will be despatched as follows: Level 3 Electronically to centres on: Available for candidates: Wednesday 12 August 2015 Thursday 13 August 2015 Levels 1 and 2 Electronically to centres on: Available for candidates: Wednesday 19 August 2015 Thursday 20 August 2015 1 Thursday 14 May 2015 (am) 09.00 start time Qualification 2760-02 Engineering Level/Unit Level 2 Unit 201 Exam The engineered world Wednesday 20 May 2015 (am) 09.00 start time Qualification Level/Unit Exam Duration 2762-01 Hair and Beauty Level 1 Unit 101 Introducing the hair and beauty sector 1h 2762-02 Hair and Beauty Level 2 Unit 202 The world of hair and beauty 1h 30m Thursday 21 May 2015 (am) 09.00 start time Qualification 2764-01 Construction and the Built Environment Level/Unit Level 1 Unit 104 Exam Create the built environment: methods and materials Duration 1h 2764-02 Construction and the Built Environment Level 2 Unit 207 Value and use of the built environment: facilities management 1h 30m 2764-03 Construction and the Built Environment Level 3 Unit 301 Design the built environment: design factors 2h Duration 1h 30m 2 Wednesday 27 May 2015 (am) 09.00 start time Qualification 2764-03 Construction and the Built Environment Level/Unit Level 3 Unit 304 Exam Create the built environment: health, safety and environmental influences Tuesday 26 May 2015 (pm) 13.30 start time Qualification 2760-03 Engineering Level/Unit Level 3 Unit 309 Exam Scientific principles and applications for engineers Thursday 28 May 2015 (am) 09.00 start time Qualification 2764-03 Construction and the Built Environment Level/Unit Level 3 Unit 307 Exam Value and use of the built environment: protecting and maintaining Friday 29 May 2015 (pm) 13.30 start time Qualification 2760-03 Engineering Level/Unit Level 3 Unit 308 Exam Mathematical techniques and applications for engineers Duration 2h Duration 2h Duration 2h Duration 2h 30m 3 When no timetable date is quoted for a particular unit, see the notes, timetable, or other information for completion dates for centre based or practical assignments. 2764-01 Construction and the Built Environment (Level 1) Unit 101 Unit 107 Design the built environment: design influences - Internal assessment Design the built environment: applying design principles - Internal assessment Create the built environment: using tools Internal assessment Create the built environment: methods and materials – Examination Value and use the built environment - Internal Assessment Maintenance of the built environment – Internal assessment Modern methods of construction - Internal 2764-02 Construction and the Built Environment (Level 2) Unit 201 Design the built environment: the design process - Internal assessment Design the built environment: materials and structures - Internal assessment Design the built environment: applying design principles - Internal assessment Create the built environment: structures Internal assessment Create the built environment: using tools Internal assessment Value and use of the built environment: communities - Internal assessment Value and use of the built environment: facilities management - Written examination Unit 102 Unit 103 Unit 104 Unit 105 Unit 106 Unit 202 Unit 203 Unit 204 Unit 205 Unit 206 Unit 207 2764-03 Construction and the Built Environment (Level 3) Unit 301 Design the built environment: design factors Written examination Design the built environment: stages in the design and planning process – Internal assessment Design the built environment: physical and environmental influences - Internal assessment Create the built environment: health, safety and environmental influences - Written examination Create the built environment: management process - Internal assessment Value and use of the built environment: adding value to the wider community – Internal assessment Value and use of the built environment: protecting and maintaining – Written examination Unit 302 Unit 303 Unit 304 Unit 305 Unit 306 Unit 307 Notes Duration Date 8 8 8 1h 21 May 15 am 8 8 8 8 8 8 8 8 8 1h 30 21 May 15 am 2h 21 May 15 am 2h 27 May 15 am 8 8 8 8 2h 28 May 15 am 4 2760-02 Engineering (Level 2) Notes Duration Date Unit 201 Unit 202 Unit 203 The engineered world - Written examination Engineering design -Internal assessment Engineering applications of computers Internal assessment Producing engineering solutions -Internal assessment Construct electronic and electrical systems Internal assessment Manufacturing engineering -Internal assessment Maintenance - Internal assessment Innovation, enterprise and technological advance -Internal assessment 6 8 8 Unit 204 Unit 205 Unit 206 Unit 207 Unit 208 2760-03 Engineering (Level 3) Unit 301 Engineering business and the environment Internal assessment Applications of Computer Aided Designing Internal assessment Selection and application of engineering materials - Internal assessment Instrumentation and control engineering Internal assessment Maintaining engineering systems and products - Internal assessment Production and manufacturing – Internal assessment Innovative design and enterprise – Internal assessment Mathematical techniques and applications for engineers - Written examination Scientific principles and applications for engineers - Internal assessment Scientific principles and applications for engineers – internal assessment Unit 302 Unit 303 Unit 304 Unit 305 Unit 306 Unit 307 Unit 308 Unit 309 Unit 609 1h 30 14 May 15 am 8 8 8 8 8 8 8 8 8 8 8 8 2h 30 29 May 15 pm 2h 26 May 15 pm 8 5 2762-01 Hair and Beauty Studies (Level 1) Unit 101 Introducing the hair and beauty sector - Written Examination Creating a positive impression in the hair and beauty sector- Internal assessment Introducing hair styling - Internal assessment Introducing basic skin care treatments- Internal assessment Introducing basic hand and nail care servicesInternal assessment Personal appearance styling and wellbeingInternal assessment Careers in the hair and beauty sector and related industries - Internal assessment Unit 102 Unit 103 Unit 104 Unit 105 Unit 106 Unit 107 2762-02 Hair and Beauty Studies (Level 2) Unit 201 Safe and healthy working practices in the hair and beauty sector and related industries Internal assessment The world of hair and beauty - Written examination The science of hair and beauty - Internal assessment Communication and client care in the hair and beauty sector - Internal assessment The history of hair and beauty in society Internal assessment Promoting and selling products and services by professional recommendation in hair and beauty sector - Internal assessment Salon and business systems and processes Internal assessment Exploring skin care and make-up - Internal assessment Exploring hair care and styling – Internal assessment Exploring hand care and nail art - Internal Assessment Unit 202 Unit 203 Unit 204 Unit 205 Unit 206 Unit 207 Unit 208 Unit 209 Unit 210 Notes Duration 1h Date 20 May 15 am 8 8 8 8 8 8 8 1h 30 20 May 15 am 8 8 8 8 8 8 8 8 6 This page is intentionally blank 7 Published by City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)844 543 0000 (Centres) T +44 (0)844 543 0033 (Learners) F +44 (0)20 7294 2413 www.cityandguilds.com City & Guilds is a registered charity established to promote education and training 8
© Copyright 2024