Side Dipper Top Dipper • Designed to allow the milker to reach the back teats • Accommodates low-uddered cows with ease • Uses only 4 cc's per cow per application • Significant dip savings • Spill proof design • Long lasting low density • Uses only 4 cc's per cow per application • Significant dip savings • Spill proof design • Long lasting low density polyethylene plastic Standard 10-32500 10-32510 10-32520 10-32530 10-32540 Foaming 10-33000 10-33010 10-33020 10-33030 10-33040 Blue Top Dipper Clear Top Dipper Green Top Dipper Yellow Top Dipper Red Top Dipper Blue Top Dipper Foamer Clear Top Dipper Foamer Green Top Dipper Foamer Yellow Top Dipper Foamer Red Top Dipper Foamer PowrDipper ® polyethylene plastic Standard 10-30000 10-30010 10-30020 10-30030 10-30040 Foaming 10-31000 10-31010 10-31020 10-31030 10-31040 Blue Side Dipper Clear Side Dipper Green Side Dipper Yellow Side Dipper Red Side Dipper Blue Side Dipper Foamer Clear Side Dipper Foamer Green Side Dipper Foamer Yellow Side Dipper Foamer Red Side Dipper Foamer The PowrDipper is an effective dipping system that combines simplicity with heavy duty construction. Because the PowrDipper hangs in an upright position, the milker has easy access to the dipping tool and is more likely to dip the cows than not. The patented PowrDipper will coat the teats with sanitizer from the tips to the base of the udder. When used with an RJB teat dip pump, field studies have shown that an RJB PowrDipper system can save up to 75% in teat dip usage as compared to spraying. Top Load 10-50100 PowrDipper Gun with 6.5" Wand 10-50101 PowrDipper Gun with 10" Wand Bottom Load 10-50110 PowrDipper Gun with 6.5" Wand 10-50120 PowrDipper Gun with 10" Wand 10-50130 PowrDipper Gun with Ball Hook and 6.5" Wand 10-50140 PowrDipper Gun with Ball Hook and 10" Wand The Coburn Company, Inc. • P O Box 147 phone 800-776 -7042 262-473-2822 www.coburn.com • • Whitewater, WI 53190 U.S.A. fax 800-776-7044 262-473-3522 [email protected] PowrSprayer • Pistol grip allows the gun to hang in natural position • Constructed of rugged glass-reinforced nylon • Provides even, consistent spray pattern • Available in four different models to accommodate various barns and milking practices MT2 Teat Spray Gun • Simple but effective spray system that combines simplicity with low cost • Large diameter, thick walled, hardened stainless steel wand • Stainless steel valve, one moving part • Stainless steel barb and clamp for coil attachment • Trigger attached with stainless steel pins, will not fall off • Available in blue, green, yellow 10-70100 MT2 Teat Spray Gun Quality Milk Isolator Top Load 10-52100 PowrSprayer Gun with 6.5" Wand 10-52110 PowrSprayer Gun with 10" Wand 10-52120 PowrSprayer Gun with 10" Tilt Back Wand Bottom Load 10-52300 PowrSprayer Gun with 6.5" Wand & 180 Degree Hook 10-52310 PowrSprayer Gun with 10" Wand & 180 Degree Hook 10-52320 PowrSprayer Gun with 10" Tilt Back Wand & 180 Degree Hook 10-52900 PowrSprayer Gun with 6.5" Wand & 90 Degree Ball Hook 10-52910 PowrSprayer Gun with 10" Wand & 90 Degree Ball Hook 10-52920 PowrSprayer Gun with 10" Tilt Back Wand & 90 Degree Ball Hook MicroTouch Teat Pump • Easy to install, hangs on wall • Automatically supplies dip to the drops in parlor or flat barn • Connect intake filter line and place it in your barrel of teat dip • Built in on/off switch to turn unit off at the end of milking • Available in 110V or 220V power 10-15000 110V MicroTouch Teat Pump, complete. 10-15020 220V MicroTouch Teat Pump, complete. Electric Teat Dip Pump • Easy to install, hangs on wall • Automatically supplies dip to the drops in parlor or flat barn • Connect intake filter line and place it in your barrel of teat dip • Built in on/off switch to turn unit off at the end of milking • Available in 110V or 220V power 10-10000 110V Electric Teat Dip Pump, complete. 10-10020 220V Electric Teat Dip Pump, complete For isolating one quarter of the cow’s milk from the other three quarters, in cases of observed evidence of high somatic cell counts in one quarter. When used as directed, A QMI can significantly lower the SCC in the bulk milk tank which can help yield higher milk premiums. Features 2 gallon capacity, large 4 inch opening for cleaning, flexible silicon rubber hoses, and heavy duty stainless steel bail to hold lid in place. 10-35000 2 Gallon Quality Milk Isolator, complete. ® The Coburn Company, Inc. • P O Box 147 phone 800-776 -7042 262-473-2822 www.coburn.com • • Whitewater, WI 53190 U.S.A. fax 800-776-7044 262-473-3522 [email protected] RJB0214