1. No category

ALFIX Façade Scaffold
Catalogue and Price List
Scaffolding System ALFIX Façade
ALFIX Façade Scaffold
p. 2 - 3
ALFIX Façade Scaffold Price List
Assembly Frames
p. 4 - 9
Scaffolding Decks / Hatch-Type Access Decks
p. 10 - 13
Access Stairs / Ladders
p. 14 - 15
Side Protection / Rear Guardrail
p. 16 - 19
Side Protection / Toeboards
p. 20 - 21
Extension Parts
p. 22 - 25
Brackets
p. 26 - 27
Lattice Girders
p. 28 - 29
Aluminium Bridging Decks
p. 30 - 31
Couplers
p. 32 - 33
Façade Scaffold Accessories
p. 34 - 37
Fall Protection Equipment
p. 38 - 39
Scaffold Examples
p. 40 - 41
Technical Details
Load capacities of spindle cross-section as
per DIN 4425
p. 42
Load classes of scaffolding decks
p. 42
Characteristic values of vertical diagonal
braces
p. 42
Extracts from DIN EN 12811 standard
p. 43
The data specified herein is for information only and shall not constitute a commercial offer.
For contingent misprints in article numbers, article descriptions as well as prices, no liability is
assumed. Subject to alterations. All rights remain with the publisher. Any reproduction, either
in whole or in part, requires the prior written permission of the publisher.
All prices shall be understood to be net plus statutory VAT. With the publishing of the current
catalogue, previous editions become invalid.
Catalogue and Price List ALFIX Scaffolding System
As of September 2009
2
Catalogue and Price List ALFIX Façade Scaffold
It doesn’t matter if it is made of steel or
aluminium, the ALFIX façade scaffolding
system is thoroughly checked for quality
and reliability in every single detail.
Both simple handling and short assembly/
disassembly times ensure an effortless
and economic use.
Our competent team of technical advisers
is always available to kindly assist you in
word and deed as you plan your structure.
All your questions will be answered. Get in
touch with one of our specialists and stay
informed!
ALFIX Façade Scaffold
The ALFIX façade scaffolding system is an assembly frame scaffold made of prefabricated components. Available bay
lengths are 0.73 m - 1.09 m - 1.57 m - 2.07 m - 2.57 m - 3.07 m and 4.14 m. Standard width of the scaffold is 0.73 m.
The scaffold can be used as a working scaffold for load classes 1 to 3 in accordance with DIN EN 12810 and 12811 (arearelated useful load 200 kg/m² in load class 3) as well as safety and roof safety scaffolding (fall height maximum 2.00 m).
The proof calculation for the standard design version was carried out at an erection height of 24 m, plus spindle (jack)
extension length. For load class 4 applications, standardised static calculations are available.
If the scaffolding system is used for scaffolds deviating from standard design, the deviations must be available for
assessment according to both the Technical Building Regulations and the appropriate technical approval and must be
calculated for each individual case.
6
7
The ALFIX façade scaffolding system consists of
a managable number of individual parts.
8
9
5
The façade scaffold's basic structure can be
erected using only a small number of standard
components which are available in various
modular dimensions and spacings.
Detailed information about the Technical Data
can be found on pages 42 and 43.
4
3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
2
1
13
ALFIX 70 (Z-8.1-862)
12
11
10
ALBLITZ 70 A (Z-8.1-897)
Base jack
Assembly frame
Aluminium frame platform
End toeboard
Double-end guardrail
Wooden toeboard
Double guardrail
Guardrail post
End guardrail frame
Start transom
Horizontal strut
Diagonal brace
Rear guardrail
ALBLITZ 70 S (Z-8.1-864)
Catalogue and Price List ALFIX Façade Scaffold
3
Assembly Frames
Assembly frame
• basic element to erect the façade
scaffold
• stackable by using pressed-in
spigot fittings
• the lower transom is also inten-
ded to retain the decking of the
underlying storey level
• the protection against displacement integrated into the upper
transom prevents a shifting of
scaffold decks under load
Assembly frame, steel
1) Assembly frame, steel
0.67 / 1.00 / 1.50 / 2.00 x 0.73 m
• steel, hot-dip galvanised
• tube profiles ø 48.3 x 2.7 mm
(assembly frame 0.73 m)
• tube profiles ø 48.3 x 3.2 mm
(assembly frame 1.09 m)
• width: 0.73 m and 1.09 m
• height: 0.67 m to 2.00 m
• U-profile for deck suspension
• patented guardrail securing
Assembly frame, aluminium
• made of lightweight and highstrength aluminium
• tube profiles ø 48.3 x 4.0 mm
• width: 0.73 m
• height: 0.67 m to 2.00 m
• U-profile for deck suspension
• patented guardrail securing
2) Assembly frame, aluminium
3) Assembly frame, steel
4
Catalogue and Price List ALFIX Façade Scaffold
0.67 / 1.00 / 1.50 / 2.00 x 0.73 m
0.67 / 1.00 / 1.50 / 2.00 x 1.09 m
Assembly Frames
Fig.
Designation
1
Assembly frame, steel; 0.73 m
tube profiles ø 48.3 x 2.7 mm; hot-dip galvanised
U-profile for deck suspension; patented guardrail securing
2
Assembly frame, aluminium; 0.73 m
tube profiles ø 48.3 x 4.0 mm
U-profile for deck suspension; patented guardrail securing
3
Assembly frame, steel; 1.09 m
tube profiles ø 48.3 x 3.2 mm; hot-dip galvanised
U-profile for deck suspension; patented guardrail securing
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
0.67 x 0.73
10.4
10 11 067L
45.00
1.00 x 0.73
12.9
10 11 100L
51.30
1.50 x 0.73
16.5
10 11 150L
53.10
2.00 x 0.73
19.6
10 11 200L
54.45
0.67 x 0.73
4.6
10 00 067
52.20
1.00 x 0.73
6.1
10 00 100
62.55
1.50 x 0.73
8.1
10 00 150
77.30
2.00 x 0.73
9.6
10 00 200
78.30
0.67 x 1.09
14.6
10 12 067
57.15
1.00 x 1.09
17.6
10 12 100
60.75
2.00 x 1.09
25.4
10 12 200
66.60
Gusset plate
Slotted holes for internal guardrail holder
Guardrail boxes
Application example: assembly frame
Catalogue and Price List ALFIX Façade Scaffold
5
Assembly Frames
732 mm
Cantilever frame, steel
362
370
732 mm
200
532
• steel, hot-dip galvanised
• tube profiles ø 48.3 x 2.7 mm
• enables untroublesome scaffolding
of projecting sections of the façade
or for working above protruded
eaves
Roof safety frame
• steel, hot-dip galvanised
• tube profiles ø 48.3 x 2.7 mm
• a removable spigot fitting enables
the continued erection according
to the 0.73 m or 1.09 m grid
spacing
• if the bracket is mounted inwards,
the use of a deck retainer is required
(Fig. 4)
• guardrail boxes and toeboard pins
mounted on both sides make it
suitable for inward and outward
bracket broadening
1) Cantilever frame, steel
2.00 x 0.37 / 0.53 m
Passageway frame
• 1.50 m wide passageway for
pedestrians enables safer
passage beneath the scaffolding
• steel, hot-dip galvanised
• 3-part, space saving transport
• tube profile ø 48.3 x 3.2 mm
• The guardrail boxes mounted on
both sides facilitate side protection
installation on both the inside and
outside.
• The scaffold width can be adjusted to 0.73 m or 1.09 m using the
removable middle spigot fitting.
• Detailed information about passageway frame applications can be
found in the ALFIX Façade Scaffold
Instructions for Erection and Use
2) Roof safety frame with removable
threaded spigot fitting
2.00 x 0.73 auf 1.09 m
3) Passageway frame; 3-part, with removable
threaded spigot fitting, 2.20 x 1.50 m
1,088
732
1,088 mm
4) Deck retainer for roof safety frame
6
Catalogue and Price List ALFIX Façade Scaffold
1,464 mm
732
Assembly Frames
Fig.
Designation
1
Cantilever frame, steel
steel tube ø 48.3 x 2.7 mm; hot-dip galvanised
2
3
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
2.00 x 0.37
21.7
10 19 100L
70.30
2.00 x 0.53
21.1
10 19 000L
70.30
Roof safety frame
steel tube ø 48.3 x 2.7 mm; hot-dip galvanised
2.00 x 0.73
to 1.09
24.2
10 19 003L
93.95
Passageway frame
steel tube ø 48.3 x 3.2 mm; hot-dip galvanised
2.20 x 1.50
40.0
10 19 004
139.40
0.36
0.9
10 48 036
8.10
3 parts
4
Deck retainer for roof safety frame
Application example: Passageway frame
Application example: Cantilever frame
Application example: Roof safety frame
Catalogue and Price List ALFIX Façade Scaffold
7
Assembly Frames
Application example: Assembly frame 0.37 m
Assembly frame 0.37 m
as cantilever frame with a 0.36m bracket and special design bracket
• steel, hot-dip galvanised
• tube profiles ø 48.3 x 3.2 mm
• with removable threaded spigot
fittings
• for applications in slim recesses
• in connection with special bracket
(see p. 26) and bracket 0.36 m
(see p. 26), expandabe to a
cantilever frame
1) Assembly frame 0.37 m
with removable threaded
spigot fittings
2.00 x 0.37 m
DS bracket frame
Bracket 0.36 m
(see p. 26)
• patented special part
• steel, hot-dip galvanised
• tube profiles ø 48.3 x 3.2 mm
• The optimum height for all craft
trades. Tilers, plumbers and
plasterers are able to work
simultaneously.
• Through the use of a DS bracket
frame, the necessity of compensating
frames, which are often required,
is eliminated while the DS frame
assumes this function due to its
construction height of 0.99 m.
• allo
• As it is intended to use the scaffold for various craft trades, a wide
range of requirements and prerequisites must be observed. The
optimum standing height and the
side protection mandatory for the
respective trade are of particular
importance. With the ALFIX DS
bracket frame, it is possible to
work at the same time at the ideal
height on both the façade and the
eave!
Bracket, special design for
assembly frame 0.37 m
(see p. 26)
3) DS storey ladder
with telescopic handrail
DS storey ladder
• equipped with a handrail
extendable up to 2 m for safe
access to the uppermost level
8
Catalogue and Price List ALFIX Façade Scaffold
2) DS bracket frame
0.99 x 0.73 m
Assembly Frames
Fig.
Designation
1
Assembly frame, steel; 0.37 m
steel tube ø 48.3 x 3.2 mm; hot-dip galvanised
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
2.00 x 0.37
19.0
10 19 200
56.25
0.99 x 0.73
16.0
10 32 099
with screwed-in spigot fitting; in connection with
a 0.36 m bracket for continued alternate erection
2
3
DS bracket frame
steel tube ø 48.3 x 3.2 mm; hot-dip galvanised
DS storey ladder
80.10
Special net price
1.00
9.0
11 42 010
58.50
with telescopic handrail
If the scaffolding is used by various craft trades,
the time-consuming necessity of completing
the required structure from a multiplicity of
individual components is eliminated when a
ALFIX DS bracket frame is used.
On the left-hand application example, the
following components are dispensable:
•
•
•
•
•
diagonal cross brace 1.77 m
bracket 0.73 m
assembly frame 1.00 x 0.73 m
bracket 0.36 m
up to 3 decks
In addition to lower initial costs, the DS
bracket frame ensures enormous time savings
during assembly/disassembly as well as a
significantly reduced material use and spacesaving transportation.
The DS storey ladder developed particularly
for the ALFIX DS bracket frame assures the
safe access to the top level by means of the
extendable handrail up to 2 m.
Application example: WITHOUT DS bracket frame
Application example: WITH DS bracket frame
Application example: DS storey ladder
Catalogue and Price List ALFIX Façade Scaffold
9
Scaffolding Decks / Hatch-Type Access Decks
Steel plank
• high loadability
• non-slip surface
• zinc-plated
1) Steel plank
Solid wood deck
• impregnated
• triple bonding standard
• 48 mm thick
• finished with a system-compatible
2) Solid wood deck
steel head piece
Solid aluminium deck
• completely made of aluminium
• profile height 48 mm
• consisting of hollow chamber
profiles with non-slip longitudinal
grooves
• overlapping edge enables
stackability
• downward facing overlapping
edge prevents water and ice
deposits
3) Solid aluminium deck 0.32 m
4) Solid aluminium deck 0.60 m
Aluminium frame platform
• lightweight
• water-resistant screen-printed
decking
• standard width 60 cm
• replaceable fixtures and decking
5) Aluminium frame platform
Intermediate deck
• serves to close gaps in plank/
deck surfaces of varying widths
• predominantly required for
6) Intermediate deck
surface-oriented space framework
Gap cover
• for covering construction induced
gaps at the bracket level
• to be inserted between the decks
10
Catalogue and Price List ALFIX Façade Scaffold
7) Gap cover
Scaffolding Decks / Hatch-Type Access Decks
Fig.
1
2
3
4
5
6
7
Designation
* Load
Dimensions
Weight
Article
Price
class
L/HxW [m]
[kg]
number
[€]
Steel plank; 0.32 m
6
0.73 x 0.32
5.6
12 21 073
37.65
hot-dip galvanised;
perforated, non-slip
6
1.09 x 0.32
8.1
12 21 109
38.45
6
1.57 x 0.32
11.4
12 21 157
39.60
6
2.07 x 0.32
13.7
12 21 207
44.40
5
2.57 x 0.32
17.1
12 21 257
51.15
4
3.07 x 0.32
20.5
12 21 307
58.05
3
4.14 x 0.32
32.1
12 21 414
115.00
Solid wood deck; 0.32 m
6
0.73 x 0.32
6.5
12 31 073
22.70
bonded; secured by a system-compatible steel head piece at both ends
6
1.09 x 0.32
9.0
12 31 109
23.70
6
1.57 x 0.32
12.5
12 31 157
32.40
5
2.07 x 0.32
16.0
12 31 207
38.25
4
2.57 x 0.32
19.0
12 31 257
42.75
3
3.07 x 0.32
23.0
12 31 307
49.05
6
1.09 x 0.32
4.7
12 11 109
64.05
6
1.57 x 0.32
6.5
12 11 157
72.45
6
2.07 x 0.32
8.4
12 11 207
85.50
5
2.57 x 0.32
10.3
12 11 257
98.55
4
3.07 x 0.32
12.2
12 11 307
112.95
3
4.14 x 0.32
16.3
12 11 414
145.80
6
1.09 x 0.60
9.1
12 12 109
98.20
6
1.57 x 0.60
12.8
12 12 157
105.75
6
2.07 x 0.60
16.6
12 12 207
130.05
5
2.57 x 0.60
19.8
12 12 257
155.25
4
3.07 x 0.60
23.2
12 12 307
179.55
Aluminium frame platform; 0.60 m
3
0.50 x 0.60
4.8
12 01 050
64.70
with water-resistant screen-printed plywood surface
3
1.57 x 0.60
11.5
12 01 157
77.85
3
2.07 x 0.60
14.5
12 01 207
87.30
3
2.57 x 0.60
17.6
12 01 257
96.75
3
3.07 x 0.60
20.7
12 01 307
115.65
3
4.14 x 0.32
19.1
12 01 414
129.85
Intermediate deck; steel
6
1.57 x 0.19
8.6
12 25 157
33.75
hot-dip galvanised
6
2.07 x 0.19
11.2
12 25 207
38.65
5
2.57 x 0.19
13.9
12 25 257
45.10
4
3.07 x 0.19
16.5
12 25 307
52.50
Gap cover
3
1.50 x 0.10
9.0
12 26 150
55.45
steel hollow section; hot-dip galvanised;
with water-resistant screen-printed plywood surface
3
2.00 x 0.10
11.2
12 26 200
64.10
3
2.50 x 0.10
13.5
12 26 250
68.50
3
3.00 x 0.10
15.8
12 26 300
74.70
Solid aluminium deck; 0.32 m
Solid aluminium deck; 0.60 m
* A load class overview is available under the topic "Technical Details" on page 42.
Catalogue and Price List ALFIX Façade Scaffold
11
Scaffolding Decks / Hatch-Type Access Decks
Aluminium frame platform
with hatch-type access
• optionally with or without integrated storey ladder
• water-resistant screen-printed
plank
• version without ladder, with not-
ches cut out for separate storey
ladder suspension (see p. 14 15), intended for ladder accesses
less than or equal to 2.07 m
1) Aluminium frame platform
with hatch-type access and integrated aluminium storey ladder
Solid aluminium frame platform
with hatch-type access and ladder
• integrated storey ladder
• unlatching of ladder is possible
from above
• exceptionally durable and weatherproof
• made completely of aluminium
2) Solid aluminium frame platform
with hatch-type access and integrated aluminium storey ladder
for special requirements, e.g.
for industrial scaffoldings (fire
resistance)
Frame platform with hatch-type
access
• replaceable fixtures and decking
• with hatch notches for storey
ladder
3) Aluminium frame platform
with hatch-type access, without ladder
• practical and dependable ladder
and hatch latching
• Alternatively to hatch-type ac-
cesses, stairways can be used as
an adjoining separate structure
(stairway tower) (see p. 14 - 15)
4) Steel plank with securing device
Steel plank
• for covering or closing corner
areas or other structurally induced
openings/gaps
• intended only for use on steel
decks
• an overlapping length of 250 mm
is required!
12
Catalogue and Price List ALFIX Façade Scaffold
5) Spring cotter
6) Corner deck
Application example: Steel plank
with locking pin and spring cotter
Scaffolding Decks / Hatch-Type Access Decks
Fig.
1
2
3
4
5
Designation
Load
Dimensions
Weight
Article
Price
class
L/HxW [m]
[kg]
number
[€]
Aluminium frame platform; 0.60 m
3
2.57 x 0.60
20.9
12 04 257
204.30
with hatch-type access and integrated aluminium storey ladder;
with water-resistant screen-printed plywood surface
3
3.07 x 0.60
24.0
12 04 307
233.10
Solid aluminium frame platform; 0.60 m
4
2.57 x 0.60
21.8
12 07 257
241.20
with hatch-type access and integrated aluminium storey ladder
3
3.07 x 0.60
25.0
12 07 307
269.10
Aluminium frame platform; 0.60 m
3
2.07 x 0.60
15.3
12 05 207
133.00
with hatch-type access, without ladder;
with water-resistant screen-printed plywood surface
3
2.57 x 0.60
18.4
12 05 257
146.00
3
3.07 x 0.60
21.5
12 05 307
169.00
Steel plank
6
1.00 x 0.30
5.5
12 24 100
34.65
hot-dip galvanised;
with locking pin and spring cotter
6
1.50 x 0.30
8.0
12 24 150
40.05
5
2.00 x 0.30
10.5
12 24 200
45.45
3
2.50 x 0.30
12.8
12 24 250
50.85
0.03
73 04 006
0.40
7.0
40 91 000
144.85
Spring cotter
spare part for item 4
Corner deck
6
made of aluminium, with integrated toeboard;
rigid for angles of 45°- 90°
3
0.73 x 0.60
Normally, the installation of access hatches alternates
one above the other. The bottom-most footfall level is
made of system decks and serves as the installation area
for the first storey ladder.
The hatch and ladder latches enable an easy release from
both the upper and the lower layer and ensure a safe
securing of the access hatch and storey ladder.
For more security against sliding during transportation or
assembly, the ladder suspension hardware is additionally
equipped on both sides with rubber spacers also intended
to prevent pinching fingers.
Hatch latching
Ladder latching
Solid aluminium frame platform with hatch-type access and integrated aluminium storey ladder
Catalogue and Price List ALFIX Façade Scaffold
13
Access Stairs / Ladders
Start transom
• steel, hot-dip galvanised
• serves as initial element for
stairways
• available in sizes 0.73 m and 1.09 m
Storey ladder
1) Start transom 0.73 m
• versions in steel, hot-dip
galvanised or lightweight
aluminium
• supplementary for access hatches
without integrated storey ladder
• suitable for bridging individual
scaffold layers
Aluminium stairway
• with system fixture
• 10 steps at 20 cm
• load max. 2 kN/m²
• suitable for platform stair tower
applications
Inner guardrail
2) Storey ladder, steel
• steel, hot-dip galvanised
• steel tube ø 40.0 mm
• usable with aluminium stairway
• for applications with alternating
3) Storey ladder, aluminium
4) Stairway, aluminium
5) Inner guadrail, steel
stair flights
• inclusive bolts and nuts
Guardrail, aluminium
• Aluminium tube ø 40.0 mm
• usable with aluminium stairway
• with fixture for scaffold boxes
• Please refer to our comprehensive
stairway and stairway accessories
programme in the ALFIX Modul
PLUS II catalogue!
14
Stairtower from ALFIX Modul
PLUS II system components
Catalogue and Price List ALFIX Façade Scaffold
6) Stair guardrail, aluminium
Access Stairs / Ladders
Fig.
1
2
Designation
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
Start transom, steel
0.73
hot-dip galvanised
2.8
14 01 073
21.60
1.09
5.4
14 01 109
35.55
2.00 x 0.40
8.1
11 42 000
36.00
2.00 x 0.40
3.7
11 32 001
46.85
Stairway, aluminium
2.57 x 0.60
21.8
11 30 257
299.70
max. load 200 kg/m² (load class 3)
3.07 x 0.60
26.5
11 30 307
365.40
Inner guardrail, steel
steel tube ø 40.0 mm; hot-dip galvanised;
2.57 / 3.07
21.1
41 28 200
81.00
2.57 x 0.60
5.3
11 31 257
80.10
3.07 x 0.60
5.9
11 31 307
83.70
Storey ladder, steel
hot-dip galvanised; for storey height 2.00 m
3
Storey ladder, aluminium
for storey height 2.00 m
4
5
for aluminium stairway 2.00 m high
6
Stair guardrail, aluminium
aluminium tube ø 40.0 mm
Application example: Staircase with start transom, aluminium stairway and aluminium stair guardrail
Catalogue and Price List ALFIX Façade Scaffold
15
Side Protection / Rear Guardrail
Rear guardrail
1) Rear guardrail
• steel, hot-dip galvanised
• steel tube ø 33.7 mm
• for erecting side protection
• with fixture for scaffold boxes
• available for all bay lengths
• Rear guardrails can also be used
2) Telescopic rear guardrail
as horizontal struts due to a bore
hole in the mounting hook
(see p. 23).
• adjustable from 1.57 to 2.57 m
telescopic rear guardrail by an
extendable tube
Double guardrail
3) Double guardrail
• versions in steel, hot-dip galvanised or lightweight aluminium
• steel tube ø 33.7 mm or aluminium tube ø 40.0 mm
• for erecting side protection with
accompanying diagonal bracing
effect
• available for bay lengths 1.57 m
to 3.07 m
4) Double guardrail, aluminium
Double-end guardrail
• steel, hot-dip galvanised
• steel tube ø 33.7 mm
• suitable as end side protection
5) Double-end guardrail 0.73 m
6) Double-end guardrail 1.09 m
End guardrail frame
• versions in steel, hot-dip galvanised or lightweight aluminium
• steel tube ø 48.3 mm or
aluminium tube ø 48.3 mm
• forms both side protection and
deck retainer on the top layer
• with patented receiving recess for
fixing the assembly frame,
guardrail post or the safety net
post above the tube end piece
6) End guardrail frame 0.73 m
16
Catalogue and Price List ALFIX Façade Scaffold
6) End guardrail frame 1.09 m
7) End guardrail frame,
aluminium 0.73 m
Side Protection / Rear Guardrail
Fig.
Designation
1
Rear guardrail
steel tube ø 33.7 mm
hot-dip galvanised
2
Telescopic guardrail
steel; hot-dip galvanised
3
Double guardrail, steel
steel tube ø 33.7 or 26.9 mm
hot-dip galvanised
4
Double guardrail, aluminium
aluminium tube ø 40 or 33 mm
with intermediate diagonal braces
5
Double end guardrail
steel tube ø 33.7 mm
hot-dip galvanised
6
End guardrail frame, steel
steel tube ø 48.3 mm
hot-dip galvanised
7
End guardrail frame, aluminium
aluminium tube ø 48.3 mm
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
0.73
1.7
10 60 073
10.80
1.09
2.4
10 60 109
11.25
1.57
3.4
10 60 157
11.70
2.07
4.4
10 60 207
12.60
2.57
5.2
10 60 257
13.50
3.07
7.0
10 60 307
14.40
4.14
9.5
10 60 414
20.15
1.57 - 2.57
6.3
10 99 000
30.90
1.57
8.4
10 61 157
29.25
2.07
10.4
10 61 207
31.70
2.57
12.1
10 61 257
33.75
3.07
15.6
10 61 307
38.90
4.14
21.5
10 61 414
68.60
1.57
3.3
10 51 158
39.60
2.07
4.5
10 51 208
54.00
2.57
5.4
10 51 258
59.40
3.07
6.0
10 51 308
68.40
4.14
8.2
10 51 415
71.80
0.73
3.8
10 62 073
23.40
1.09
4.5
10 62 109
26.55
1.00 x 0.73
13.0
10 63 073L
58.55
1.00 x 1.09
16.3
10 63 109
59.85
1.00 x 0.73
6.0
10 52 073
64.80
Installation of end guardrail frame
and double end guardrail
Patented receiving recess of end
guardrail frame
Application example:
End guardrail frame and double end guardrail
Catalogue and Price List ALFIX Façade Scaffold
17
Side Protection / Rear Guardrail
Internal guardrail holder
• steel, hot-dip galvanised
• with two hooks (0.66 m total
length) for catching the assembly
frame slot holes or one halfcoupler
or one wedge coupler (0.56 m
total length) for system-independent use
• Usable for all system-compatible
rear guardrails!
1) Internal guardrail holder with
halfcoupler or wedge coupler
Guardrail post, single
• versions in steel, hot-dip galvanised or lightweight aluminium
• steel tube ø 48.3 mm or
aluminium tube ø 48.3 mm
• serves, at the same time, as upper
deck retainer on bracket level 0.36 m
• patented securing for rear guardrail
2) Internal guardrail
holder with 2 hooks
Guardrail post
• versions in steel, hot-dip galvanised or lightweight aluminium
• steel tube ø 48.3 mm or
aluminium tube ø 48.3 mm
• available in the widths 0.73 and
1.09 m
• serves simultaneously as upper
deck retainer
• patented securing for rear guardrail
3) Guardrail post, single
4) Guardrail post, single,
aluminium
The spigot fittings inside the guardrail
posts facilitate putting together two
posts and thus
ensuring a simple
and space-saving
warehousing and
transportation.
5) Guardrail post 0.73 m
18
Catalogue and Price List ALFIX Façade Scaffold
5) Guardrail post 1.09 m
6) Guardrail post,
aluminium 0.73 m
Side Protection / Rear Guardrail
Fig.
Designation
Dimensions
L/HxW [m]
Weight
[kg]
1
Internal guardrail holder
steel; hot-dip galvanised;
Article
number
Price
[€]
0.56
1.4
10 65 712
19.90
with 1 wedge coupler
0.56
1.4
10 65 713
19.90
Internal guardrail holder
steel; hot-dip galvanised;
0.66
1.8
10 65 711
16.95
1.00
5.4
10 65 100L
21.60
1.00
2.8
10 54 000
25.55
with 1 halfcoupler
2
with 2 hooks
3
Guardrail post, single
steel tube ø 48.3 mm; hot-dip galvanised;
with short deck retainer
4
Guardrail post, single
aluminium ø 48.3 mm;
with short deck retainer
5
Guardrail post
steel tube ø 48.3 mm; hot-dip galvanised;
with deck retainer
6
Guardrail post
aluminium ø 48.3 mm;
1.00 x 0.73
7.0
10 64 073L
29.70
1.00 x 1.09
8.4
10 64 100
31.05
1.00 x 0.73
3.4
10 53 100
35.55
with deck retainer
Application example: Guardrail post
Application example: Guardrail post, single
Catalogue and Price List ALFIX Façade Scaffold
19
Side Protection / Toeboards
Toeboard
1) Toeboard, wood
• made of impregnated wood
• framed with fittings
• to be fitted into the toeboard pins
or toeboard coupler
2) End toeboard, wood, 0.73 m
2) End toeboard, wood, 1.09 m
3) Toeboard coupler
End toeboard
• made of impregnated wood
• framed with fittings
• to be fitted into the toeboard pins
or toeboard coupler
Safety side meshguard
• steel, hot-dip galvanised
• with fixture for scaffold boxes
• suitable for roof safety scaffolds
• if a safety net post is used, two
4) Safety side meshguard
safety meshguards are mounted
one above the other
Guard net system
• built-in assembly unit
• mesh size 60 mm
• green
• incl. rear guardrail and aluminium
tube with spigot fitting
5) Guard net system
• fastening on the left and right
with integrated fixing cords
• alternative system-independent
nets, see ALFIX Accessories
Catalogue
Safety net post
• steel, hot-dip galvanised
• suitable for roof safety scaffolding
• each with 4 patented guardrail
boxes
• also available in telescopic design
from 0.36 m to 0.73 m
• securing the extension length by
means of a hinged pin
6) Safety net post 0.73 m
20
Catalogue and Price List ALFIX Façade Scaffold
6) Safety net post 1.09 m
7) Safety net post, telescopic
0.73 - 0.50 - 0.36 m
Side Protection / Toeboards
Fig.
1
Designation
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
Wooden toeboard
0.73
framed with fittings;
height 15 cm
2.0
12 50 073
9.45
1.09
2.7
12 50 109
10.35
1.57
4.0
12 50 157
11.25
2.07
5.0
12 50 207
12.15
2.57
6.5
12 50 257
13.05
3.07
7.5
12 50 307
13.70
4.14
9.0
12 50 414
23.00
Wooden end toeboard
0.73
1.5
12 51 073
8.50
framed with fittings;
height 15 cm
1.09
1.9
12 51 109
9.75
3
Toeboard coupler
SW 19
0.6
13 13 019
11.50
4
Safety side meshguard
steel tube ø 38 mm; hot-dip galvanised
2.07 x 1.00
17.2
14 27 200
102.60
2.57 x 1.00
20.2
14 27 257
112.50
3.07 x 1.00
23.2
14 27 307
126.90
2
5
6
7
Guard net system
2.07 x 1.50
3.7
14 21 207
81.40
2.57 x 1.50
4.5
14 21 257
93.10
3.07 x 1.50
5.3
14 21 307
108.50
2.07 x 2.00
4.7
14 22 207
101.10
2.57 x 2.00
6.8
14 22 257
114.85
3.07 x 2.00
8.1
14 22 307
132.60
Safety net post
steel tube ø 48.3 mm; hot-dip galvanised
2.00 x 0.73
14.6
10 71 073
65.25
2.00 x 1.09
16.3
10 71 070
66.60
Safety net post, telescopic
steel tube ø 48.3 mm; hot-dip galvanised
2.00 x 0.36
to 0.73
15.1
10 71 075
69.90
Application example: Toeboard coupler
with inboard side protection
Application example:
Safety side meshguard, safety net post and guard net system
Catalogue and Price List ALFIX Façade Scaffold
21
Extension Parts
Horizontal strut
1) + 2) Horizontal strut with 2 turnable half or wedge couplers
• steel, hot-dip galvanised
• steel tube ø 42.4 mm
• with two turnable half (SW 19)
or wedge couplers for the lower
horizontal connection of assembly
frames in a diagonal bay
3) Diagonal brace with turnable halfcoupler
Diagonal brace
4) Diagonal brace with turnable wedge coupler
• steel, hot-dip galvanised
• steel tube ø 42.4 mm or
5) Diagonal brace with two
turnable halfcouplers
ø 57.0 mm (for a 4.14 m bay)
• with turnable half or wedge coupler
or 2 turnable halfcouplers (SW 19)
at bay lengths of 1.57 and 4.14 m
• for vertical bracing of scaffolding
• follow-up adjustment is possible
• for one-sided suspension in the
gusset plate
ALFIX transom
Application example: Mounting in the
gusset plate of assembly frame
3)
• steel, hot-dip galvanised
• U-profile with weld-on couplers for
receiving the decks at intermediate
heights or directly above the
assembly frame deck retainer in
order to form a support surface for
storey ladders
• with notches to assemble frame
toeboard pins
ALFIX quick-release anchor
• steel, hot-dip galvanised
• with hook and anti-twist guide
plate for hooking-in beneath the
U-profile
• adjustable wall clearance
• fastening with one standard
coupler beneath the U-profile
Spacing tube
• steel, hot-dip galvanised
• installation with two standard
couplers
22
Catalogue and Price List ALFIX Façade Scaffold
4)
5)
Application example:
ALFIX transom with
notches for the
toeboard pins
6) ALFIX transom 0.73 m
6) ALFIX transom 1.09 m
7) Quick-release anchor 0.65 m
8) Spacing tube 1.00 m
Extension Parts
Fig.
Designation
1
Horizontal strut
with two turnable halfcouplers;
steel tube ø 42.4 mm; hot-dip galvanised
2
3
4
5
Horizontal strut
with two turnable wedge couplers;
steel tube ø 42.4 mm; hot-dip galvanised
Diagonal brace
with turnable halfcoupler;
steel tube ø 42.4 mm; hot-dip galvanised
Diagonal brace
with turnable wedge coupler;
steel tube ø 42.4 mm; hot-dip galvanised
Diagonal brace
with two turnable halfcouplers;
steel tube ø 42.4 mm (bay 1.57 m)
or 57.0 mm (bay 4.14 m)
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
2.07
5.5
11 02 207
39.15
2.57
6.5
11 02 257
44.55
3.07
7.6
11 02 307
52.65
2.07
5.5
11 02 208
39.15
2.57
6.5
11 02 258
44.55
3.07
7.6
11 02 308
52.65
for bay 2.07 m
2.80
6.5
11 00 280
22.95
for bay 2.57 m
3.20
7.3
11 00 320
23.85
for bay 3.07 m
3.60
7.9
11 00 360
24.75
for bay 2.07 m
2.80
6.5
11 00 281
22.95
for bay 2.57 m
3.20
7.3
11 00 321
23.85
for bay 3.07 m
3.60
7.9
11 00 361
24.75
for bay 1.57 m
2.36
6.1
11 00 150
35.10
for bay 4.14 m
4.43
14.0
11 00 414
66.80
0.73
3.2
14 02 719
31.95
1.09
5.9
14 02 119
35.55
hot-dip galvanised
6
ALFIX transom
steel; hot-dip galvanised
7
ALFIX quick-release anchor
steel tube ø 48.3 mm; hot-dip galvanised
0.65
2.3
13 62 065
10.35
8
Spacing tube
steel tube ø 48.3 mm; hot-dip galvanised
0.40
1.9
13 61 040
7.75
1.00
4.0
13 61 100
12.15
1.30
5.1
13 61 130
13.30
1.50
5.9
13 61 150
16.50
Application example: Rear guardrail used as horizontal strut (using a bore hole in the
mounting hook to be fastened onto toeboard pins)
Application example: Diagonal brace and horizontal strut
Catalogue and Price List ALFIX Façade Scaffold
23
Extension Parts
Base jack
• steel, hot-dip galvanised
• baseplate 15 x 15 cm
• threaded tube 38 mm
• rigid or swivelling
Foot plate
• steel, hot-dip galvanised
• 15 x 15 cm footprint
• with tube section 38 mm
1) Base jack 0.40 - 0.60 - 0.80 m
2) Base jack, swivelling
Levelling tube
• steel, hot-dip galvanised
• to equalise stairs ends
• multiple height adjustments
3) Foot plate
through 120 mm hole spacing
• Safety locking clip
ALFIX rolling beam, universal
design
• steel, hot-dip galvanised
• 2 m wide
• with differently arranged spigot
fittings for central and lateral
scaffold erection
• alternatively as universal rolling
beam with displacement adapter
unit (1.60 and 1.80 m wide)
5) Locking clip
Application example:
ALFIX rolling beam, universal design
4) Levelling tube
ALFIX scaffolding castor
• steel, hot-dip galvanised
• castor diameter 200 mm
• double stop braking system
• centric load initiation
• threaded for stepless height
adjustment
• maximum load 6 kN; higher loads
on request
6) ALFIX rolling beam
Locking clip
• steel, hot-dip galvanised
• additional safeguarding of
scaffold components
24
7) ALFIX rolling beam, universal design 1.60 m
Catalogue and Price List ALFIX Façade Scaffold
8) Castor
Extension Parts
Fig.
Designation
max.
Dimensions
spindle travel L/HxW [m]
1
Base jack
steel; hot-dip galvanised
2
Base jack, swivelling
steel; hot-dip galvanised
3
Foot plate
steel; hot-dip galvanised
Weight
[kg]
Article
number
Price
[€]
0.25
0.40
2.9
11 51 040
11.45
0.45
0.60
3.4
11 51 060
12.55
0.60
0.80
4.2
11 51 080
18.40
0.45
0.60
4.5
11 52 060
27.90
0.15 x 0.15
1.1
11 50 000
4.25
1.80
6.4
13 60 180
27.75
0.13
14 50 000
0.65
15 x 15 cm
4
Levelling tube
steel; hot-dip galvanised
5
Locking clip
6
ALFIX rolling beam
steel; hot-dip galvanised
2.00
18.6
14 12 200
98.05
7
ALFIX rolling beam, universal design; movable
steel; hot-dip galvanised
1.60
10.7
30 07 510
52.85
1.80
14.6
30 07 600
60.00
0.70
6.7
14 12 001
67.95
8
ALFIX castor
castor diameter 200 mm; 6 kN
0.35
Application example: Levelling tube
Catalogue and Price List ALFIX Façade Scaffold
25
Brackets
ALFIX brackets
• steel, hot-dip galvanised
• available in multiple variants for
the most diverse applications
• suitable for inward and outward
3) Inner corner bracket
1) Bracket with halfcoupler
broadening/extension of scaffold
• with U-profile for system-compatible
decks
Inner corner bracket
• steel, hot-dip galvanised
• provides a barrier-free circulation
on inside corner oriented façade
scaffolding
• facilitates the use of systemcompatible components for side
protection instead of using tube
coupling devices
Application example:
Bracket 0.36 m and
special bracket
2) Bracket, special design
4) Bracket 0.50 m for
extending or shortening
with 0.37 m assembly frame as cantilever frame
5) Deck retainer for bracket
Bracket 0.50 m
• steel, hot-dip galvanised
• for extending or shortening the
scaffold bay according to the grid
spacing by 0.50 m in each case
• For receiving the 0.50 m frameplatform with suspension for
U-profiles, the use of a ALFIX
transom (see p. 22) is required.
Application example: Diagonal cross brace
for bracing the assembly frame and
supporting the bracket
Diagonal cross brace
• steel, hot-dip galvanised
• steel tube ø 42.4 mm
• to support the bracket for roof
Application example: Bracket 0.73 m
safety scaffolding applications or
• for fulfiling necessary static
requirements, e.g. for bracing the
assembly frames in a transverse
direction
6) Diagonal cross brace for brackets 0.73 m and 1.09 m
26
Catalogue and Price List ALFIX Façade Scaffold
Application example:
Inner corner bracket
Brackets
Fig.
Designation
1
Bracket
steel; hot-dip galvanised
with halfcoupler and U-profile
2
Bracket, special design
steel; hot-dip galvanised
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
0.36
3.7
10 30 036
23.80
0.50
4.5
10 49 055
31.00
0.73
6.7
10 30 073
31.50
1.09
7.0
10 30 109
74.70
0.36
2.9
10 49 036
32.50
0.27
3.2
10 49 025
22.90
0.50
5.0
10 49 050
31.95
0.36
1.0
10 48 036
8.10
for transitions from 1.09 m to 0.73 m and 0.73 m to 0.37 m
3
Inner corner bracket
steel; hot-dip galvanised
with special locking clip
4
Bracket 0.50 m
steel; hot-dip galvanised
for extending or shortening the scaffold bay according to the grid spacing
5
6
Deck retainer for bracket
steel; hot-dip galvanised
0.73
1.5
10 48 073
9.95
1.09
2.3
10 48 109
13.50
Diagonal cross brace
for bracket 0.73 m
1.77
4.8
11 28 719
31.05
steel tube ø 42.4 mm; hot-dip galvanised
for bracket 1.09 m
1.95
5.2
11 28 119
32.40
Application example:
Inner corner bracket
Application example: Bracket 0.50 m
for extending or shortening
Application example:
Bracket 0.50 m and
diagonal cross brace
Catalogue and Price List ALFIX Façade Scaffold
27
Lattice Girder
Lattice girder
• versions in steel, hot-dip galvanised
or lightweight aluminium, per
ø 48.3 mm
• suitable for system-independent
façade scaffolding installations
if there is a structural necessity
(passages, etc.)
• The loading capacity depends
on the material and the bridging
length!
• load capacities, see Approval or
Instructions for Erection and Use
1) Lattice girder, steel
Application example: Lattice girder
Lattice girder cross brace
• steel, hot-dip galvanised
• U-profile for receiving systemcompatible decks
• suitable for bridging within the
façade scaffolding
• securing against lifting using
fastening bolts
• suitable for system-independent
3) Lattice girder cross brace 0.73 m
lattice girders as an alternative to
screwed-in half-frames
Lattice girder suspension
• steel, hot-dip galvanised
• suitable to fasten system-
independent lattice girders
on the assembly frames in the
case of standard bridgings
Application example:
Suspension for
lattice girder
Wall mounting for lattice girder
• steel, hot-dip galvanised
• for the end side mounting of
lattice girders on the building,
particularly for special constructive
solutions
• fastening depending on anchorage
and loading
• itemised proof is required
5) Spigot fitting for
lattice girder with four bolts
M 14 x 60 mm
Aluminium U-profile
• U-profile for receiving system
4) Suspension
for lattice girder
6) Attachment piece
for lattice girder
7) Wall mounting
for lattice girder
decks
• suitable for screwing onto the
lattice girder upper chord
• predominantly used for surfaceoriented work scaffoldings
28
Catalogue and Price List ALFIX Façade Scaffold
8) Aluminium U-profile 3.00 m
Lattice Girder
Fig.
Designation
1
Lattice girder, steel
steel tube ø 48.3 mm
hot-dip galvanised
2
Aluminium lattice girder
aluminium ø 48.3 mm
(without fig.)
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
3.20 x 0.45
31.9
13 75 320
113.40
4.20 x 0.45
41.1
13 75 420
139.50
5.20 x 0.45
50.3
13 75 520
172.80
6.20 x 0.45
59.6
13 75 620
192.60
7.77 x 0.45
73.9
13 75 706
251.00
3.20 x 0.45
12.8
13 70 320
127.80
4.20 x 0.45
16.5
13 70 420
163.80
5.20 x 0.45
20.2
13 70 520
196.20
6.20 x 0.45
23.8
13 70 620
230.40
8.20 x 0.45
31.2
13 70 820
303.30
Lattice girder cross brace
steel; hot-dip galvanised
0.73
7.0
13 81 073
46.80
1.09
8.2
13 81 109
48.20
4
Suspension for lattice girder
0.53
3.2
13 85 000
29.00
5
Spigot fitting for lattice girder
steel; hot-dip galvanised
0.41
1.5
13 88 030
13.15
0.30
2.5
13 75 000
21.85
0.70
6.8
13 90 001
55.60
Aluminium U-profile
2.00
4.7
13 80 200
45.00
with halfcouplers
3.00
6.8
13 80 300
67.50
4.00
8.9
13 80 400
84.15
3
with four bolts M 14 x 60 mm
6
Attachment piece for lattice girder
with boreholes for locking clips
7
Wall mounting for lattice girder
steel; hot-dip galvanised
version with U-profile 120 mm
8
Special size
5.00
11.0
13 80 500
107.10
6.00
13.1
13 80 600
126.90
13 80 000
22.50
linear metres
Application example
Wall mounting for lattice girder
Catalogue and Price List ALFIX Façade Scaffold
29
Aluminium Bridging Decks
Aluminium bridging deck
Application example:
Wooden toeboard, guardrail post single, aluminium bridging deck
• 150 kg single load or 100 kg/m²
area-related useful load
• erecting the side protection using
a threaded rod and a guardrail
holder
• anti-tilt device for securing at the
assembly frame
• bore holes for receiving the guardrail
holders according to grid spacing
• suitable for all scaffolding systems
3) Scaffold retainer, steel
Guardrail dimensions for aluminium
bridging decks
Bridging
decks
Guardrail dimensions
4m
2 x 1.57 m
5m
2 x 2.07 m
6m
2 x 2.57 m
7m
2 x 3.07 m
8m
2 x 2.57 m ; 1 x 2.07 m
9m
2 x 2.57 m ; 1 x 3.07 m
10 m
3 x 3.07 m
Scaffold retainer (steel), collar nut and threaded rod
4) Guardrail post, single
Application example: Anti-tilt device
for aluminium bridging deck
Scaffold retainer
• steel, hot-dip galvanised
• for receiving both single guardrail
posts and side protection
elements of façade scaffolding
5) Guardrail post, single,
aluminium
Threaded rod
• steel, hot-dip galvanised
• ø 15.1 mm
• for fastening guardrail holders
• longer versions are used for
connecting several aluminium
bridging decks in the transverse
direction
Application example: Aluminium bridging deck
7) Collar nut
Guardrail post, single,
rear guardrail and toeboard
8) Rear guardrail
• see p. 18 (guardrail post)
• see p. 16 (rear guardrail)
• see p. 20 (toeboard)
9) Toeboard, wood
30
Catalogue and Price List ALFIX Façade Scaffold
Aluminium Bridging Decks
Fig.
Designation
1
Aluminium bridging deck
height 0.12 m
2
Aluminium bridging deck
height 0.14 m
(without fig.)
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
4.00 x 0.53
23.3
32 00 400
284.80
5.00 x 0.53
28.5
32 00 500
375.20
6.00 x 0.53
33.8
32 00 600
443.60
7.00 x 0.53
39.0
32 00 700
539.40
8.00 x 0.53
68.3
32 00 800
657.15
9.00 x 0.53
76.4
32 00 900
717.40
10.00 x 0.53
84.4
32 00 001
777.65
1) Aluminium bridging deck
3
Scaffold retainer
steel; hot-dip galvanised
0.25
1.8
32 01 002
13.90
4
Guardrail post, single
steel tube ø 48.3 mm; hot-dip galvanised
1.00
6.7
10 65 100L
21.60
1.00
2.8
10 54 000
25.55
for 1 bridging deck
0.90
1.4
32 02 001
7.65
for 2 bridging decks
1.44
2.2
32 02 002
11.40
for 3 bridging decks
1.97
3.0
32 02 003
15.40
for 4 bridging decks
2.50
3.8
32 02 004
19.35
0.5
32 03 000
5.40
2.07
4.4
10 60 207
12.60
2.57
5.2
10 60 257
13.50
3.07
7.0
10 60 307
14.40
see also pages 18 and 19
5
Guardrail post, single
aluminium ø 48.3 mm
see also pages 18 and 19
6
7
Threaded rod
steel; hot-dip galvanised
ø 15.1 mm
(without fig.)
Collar nut
for threaded rod ø 15.1 mm
8
Rear guardrail
steel tube ø 33.7 mm
hot-dip galvanised
see also pages 16 and 17
9
10
Toeboard, wood
2.07
5.0
12 50 207
12.15
framed with fittings
to be fitted into the toeboard pins
height 15 cm
see also pages 20 and 21
2.57
6.5
12 50 257
13.05
3.07
7.5
12 50 307
13.70
Anti-tilt device for aluminium bridging deck
0.20
1.1
13 17 019
11.00
Catalogue and Price List ALFIX Façade Scaffold
31
Couplers
ALFIX couplers
• for tubes of 48.3 mm
• The used couplers correspond to
DIN EN 74 and possess the
respective manufacturer's
approval.
1) Standard coupler
4) Guardrail coupler
with wedge coupler
2) Swivel coupler
5) Guardrail coupler
3) Halfcoupler
6) Combination coupler
8) Spigot fitting, universal, clampable
Application example: Claw coupler
7) Claw coupler
10) Tension coupler
Application example: Halfcoupler with
hook as V-anchor
32
13) Halfcoupler with hook
Catalogue and Price List ALFIX Façade Scaffold
9) Spigot fitting for tension coupler
11) Toeboard coupler
14) Tilting pin lock coupler
12) Squared timber coupler
15) Reducing standard coupler
Couplers
Fig.
1
Designation
Dimensions
L/HxW [m]
Standard coupler
Weight
[kg]
Article
number
Price
[€]
SW 19
1.1
13 01 019
5.55
SW 19
1.2
13 03 019
6.15
with collar nuts; for tubes ø 48.3 mm
2
Swivel coupler
with collar nuts; for tubes ø 48.3 mm
3
Halfcoupler
SW 19
0.6
13 02 019
2.90
4
Guardrail coupler with wedge coupler
SW 19
1.3
13 09 030
14.85
5
Guardrail coupler
SW 19
1.3
13 09 019
12.40
6
Combination coupler
SW 19
0.5
13 04 019
10.70
7
Claw coupler
SW 19
0.9
13 10 019
9.55
0.24
1.7
13 08 001
8.90
1.0
13 08 000
4.15
SW 19
1.4
13 07 019
8.15
8
Spigot fitting, universal, clampable
consisting of 2 half-shells and a screw;
for connecting tubes subject to impact stress;
spread apart using the bolt
9
10
Spigot fitting
for tension coupler
Tension coupler
with collar nuts; for tubes ø 48.3 mm
11
Toeboard coupler
SW 19
0.6
13 13 019
11.50
12
Squared timber coupler
SW 19
1.8
33 81 019
15.45
13
Halfcoupler with hook
SW 19
0.9
13 06 019
9.35
14
Tilting pin coupler
SW 19
0.6
13 05 019
9.65
15
Reducing standard coupler
48 / 33 mm
SW 19
1.0
13 11 019
11.15
16
Bolt, hexagon head
M 14 x 65 DIN 931 8.8 zinc-plated
with cap nut to be used as fastening bolt
0.1
14 53 000
0.40
Cap nut
0.04
73 02 003
1.05
17
DIN 1587- M14, steel, zinc-plated
16) Bolt, hexagon head
17) Cap nut
Catalogue and Price List ALFIX Façade Scaffold
33
Façade Scaffold Accessories
Bracket with halfcoupler and
fixture for hoisting wheel
• steel, hot-dip galvanised
• design, see bracket 0.73 m
• with welded-on fixture for ALFIX
pulleys
ALFIX pulleys
1) Bracket with halfcoupler
and fixture for hoisting wheel
2) Pulley
3) Spoke pulley
• with crossed bow, turnable load
hook and safety catch or carabiner
• suitable for ropes up to ø 28 mm
• permissible tensile load 200 kg
• pulley diameter 190 mm (standard
4) Scaffold tube, steel
pulley) or 350 mm (spoke pulley)
5) Scaffold tube, aluminium
Scaffold post, telescopic
• steel, hot-dip galvanised
• Transport length 3.2 m
• Extension length 3.0 - 5.0 m
• support of free standing scaffolds
8) Protective shelter
6) Scaffold post, telescopic
up to 6.0 m standing height
• integrated bracing for a safe
connection to the scaffolding
• locking clip for fixing the diagonal
tube at various extension lengths
• fastening of foot plate with two
ground spikes each
Protective shelter
• steel, hot-dip galvanised
• used in combination with bracket
and diagonal cross brace
• creation of guard net system
through the vertical installation of
system-compatible decks
• usable at any height
• for appropriate anchoring, see
Instructions for Erection and Use
on page 25
7) Ground spike
34
Catalogue and Price List ALFIX Façade Scaffold
Façade Scaffold Accessories
Fig.
1
Designation
Bracket
Dimensions
L/HxW [m]
Weight
[kg]
Article
number
Price
[€]
0.73
6.7
10 49 073
45.15
with halfcoupler and fixture for hoisting wheel
2
Pulley
ø 190 mm
2.3
37 83 000
62.60
3
Spoke pulley with carabiner
ø 350 mm
2.7
37 83 002
78.00
4
Scaffold tube, steel
ø 48.3 x 3.25 mm
to 6 m
linear metres
3.5 per m
13 50 ***
9.50 per m
6.00
9.0
13 50 600
51.00
linear metres
1.5 per m
13 40 ***
11.00 per m
6.00
9.0
13 40 600
64.00
hot-dip galvanised
5
Scaffold tube, aluminium
ø 48.3 x 4.05 mm
to 6 m
6
Scaffold post, telescopic
steel; hot-dip galvanised
28.0
13 63 500
137.50
7
Ground spike
2.0
61 00 000
6.55
8
Protective shelter
steel; hot-dip galvanised
4.1
10 71 000
32.45
0.46 x 0.66
Application example:
Ground spike
Application example: Scaffold post, telescopic
locking clip for fixing the diagonal
tube at various extension lengths
Catalogue and Price List ALFIX Façade Scaffold
35
Façade Scaffold Accessories
1) Weather protection post
Weather protection post
• steel, hot-dip galvanised
• attachable element for light
weather protection on façade
scaffoldings
• weather protection posts are
connected through the rear
guardrail
Weather protection add-on unit
2) Weather protection add-on unit
• steel, hot-dip galvanised
• add-on unit onto assembly frames
of 0.73 m system width
• weather protection add-on units
are connected through the rear
guardrail.
• roofing element for receiving
scaffolding tarpaulins (see
Accessories Catalogue)
• fastening of scaffolding protection
tarpaulins by means of cable ties
Renovation trestle
• aluminium design
• with U-profile for system decks
suspension
• if four renovation trestles are
used, three aluminium frame
platforms can be suspended in
parallel
• height adjustable from 440 mm to
670 mm
3) Renovation trestle
4) Recess bracket starting piece
36
5) Recess bracket holder
Catalogue and Price List ALFIX Façade Scaffold
6) Locking clip
7) Hinged pin
Façade Scaffold Accessories
Fig.
Designation
Dimensions
L/HxW [m]
Weight
[kg]
1
Article
number
Price
[€]
Weather protection post
steel; hot-dip galvanised
2.00
14.3
10 71 200
66.60
2
Weather protection add-on unit
steel; hot-dip galvanised
2.00
18.0
10 71 201
50.20
3
Renovation trestle
height 0.44 - 0.67 m
0.44 to
0.67 x 0.65
4.2
33 20 000
70.70
made of aluminium
4
Recess bracket starting piece
0.35
1.7
14 40 000
4.80
5
Recess bracket holder with integrated halfcoupler;
for all scaffolding systems up to widths of 0.65 m and 1.00 m
0.70
2.3
14 51 060
28.30
1.00
2.9
14 51 100
30.75
0.13
14 50 000
0.65
0.15
30 06 250
0.90
6
Locking clip
see also pages 24 and 25
7
Hinged pin
steel; zinc-plated
Application example: Recess bracket holder
Recess bracket holder
Per storey, two recess bracket holders are placed onto the decks and fixed by tensioning bolts. The holders are fit onto every scaffold
deck. Their arrangement must ensure that the recess can be secured by a grid-like decking and that the lateral recess gap does not
exceed 30 cm according to the scaffolding regulations. Tubes are vertically fixed to the halfcouplers, which are integrated into the holder,
across two or more (depending on recess brackets) storeys. The tubes serve for fixing the brackets at the required appropriate height.
Catalogue and Price List ALFIX Façade Scaffold
37
Fall Protection Equipment
Advanced side protection
• steel, hot-dip galvanised
• consisting of an advanced
guardrail post, advanced end
guardrail and telescopic guardrail
• safety device for scaffold assembly/
disassembly
• suitable for all compatible
scaffolding systems
• for proper usage, see Instructions
for Erection and Use or the provisions of the employer's liability
insurance association for construction sites (BG Bau)
Application example 1) Advanced guardrail post
with practical base-unlocking
Personal protective equipment
(PPE) against falling
• certified by the DEKRA expert
organisation for the use in
scaffolding applications
• connecting means are sharp-edge
resistant
• special carabiners for scaffolding
applications
• delivered in a backpack (scaffolding
kit 1) or in a PVC equipment bag
(scaffolding kit 2)
• optional tool bag for scaffolding
ratchets
2) Advanced end guardrail
3) Advanced telescopic guardrail
Safety double guardrail
• versions in steel with double bead
couplers, hot-dip galvanised, or
lightweight aluminium with selflocking aluminium claws
• steel tube ø 33.7 mm or
aluminium tube ø 40 mm
• usable as an advanced side
protection with simultaneous
longitudinal bracing effect
• If a safety double guardrail is used
throughout the entire scaffolding
(see application example), the
use of diagonals is not necessary
since the double guardrail
provides this function.
38
Catalogue and Price List ALFIX Façade Scaffold
Application example:
6) Safety double guardrail
Fall Protection Equipment
Fig.
1
Designation
Advanced guardrail post
Dimensions
L/HxW [m]
Weight
[kg]
2.00
6.2
Article
number
14 43 100
steel; hot-dip galvanised
2
Advanced end guardrail
0.80
1.5
14 43 300
5
Advanced telescopic guardrail
2.50 - 3.07
7.9
14 43 200
43.00
Special net price
Personal protective equipment (PPE) against falling
EN 354 / 355 / 361 / 363 ; sharp-edge resistant
129.50
PPE scaffolding kit 1
(AX 11 belt, 2.5 m; with dorsal eyebolt;
incl. dorsal eyebolt extension and backpack)
37 67 007
PPE scaffolding kit 2
(Revolution R2 Scaff belt, 2 m; Manyard Edge lanyard; incl.
equipment bag)
37 67 009
Tool bag for scaffolding ratchets
37 50 017
15.00
Safety double guardrail, steel
steel tube ø 33.7 mm
hot-dip galvanised;
with double bead couplers
(without fig.)
6
11.00
Special net price
steel; hot-dip galvanised
4
30.00
Special net price
steel; hot-dip galvanised
3
Price
[€]
Safety double guardrail, aluminium
aluminium tube ø 40 mm
with self-locking aluminium claws
4) PPE scaffolding kit 1 - Fig.: AX11 belt, backpack, safety lanyard with shock absorber (sharp-edge resistant)
Special net price
240.00
Special net price
0.73
8.5
14 44 073
61.40
1.09
9.0
14 44 109
61.90
1.57
11.0
14 44 157
62.40
2.07
12.8
14 44 207
63.40
2.57
15.1
14 44 257
71.10
3.07
16.9
14 44 307
79.00
0.73
4.5
14 45 073
92.80
1.09
5.9
14 45 109
97.20
1.57
6.8
14 45 157
110.75
2.07
7.7
14 45 207
118.60
2.57
9.0
14 45 257
124.30
3.07
10.5
14 45 307
129.65
4) PPE scaffolding kit 2 - Fig.: Revolution R2 Scaff belt, equipment bag, Manyard Edge
lanyard (sharp-edge resistant) and tool bag for scaffolding ratchets
Catalogue and Price List ALFIX Façade Scaffold
39
Scaffolding Examples
ALFIX façade scaffold 0.73 m according to the price list
Assembly frame,
aluminium
Alternative scaffold decks
Scaffold access
Scaffold anchoring
Basic equipment
3.07 m
Bay length of scaffold: 3.07 m
40
Scaffold length x working height
(m)
Scaffold surface
12.28 x 8.20
21.49 x 10.20
30.70 x 10.20
39.91 x 10.20
49.12 x 10.20
98.24 x 10.20
101 m2
219 m2
313 m2
407 m2
501 m2
1002 m2
Base jack 0.40 m
11 51 040
10
16
22
28
34
66
Assembly frame 2.00 x 0.73 m
10 11 200L
15
32
44
56
68
132
Solid wood deck 3.07 x 0.32 m
12 31 307
24
56
80
104
128
256
Rear guardrail 3.07 m
10 60 307
28
63
90
117
145
290
Double end guadrail 0.73 m
10 62 073
4
6
6
6
6
6
Diagonal brace 3.60 m
11 00 360
3
8
8
12
16
28
Guardrail post 0.73 m
10 64 073L
3
6
9
12
15
31
End guardrail frame 0.73 m
10 63 074L
2
2
2
2
2
2
Wooden toeboard 3.07 m
12 50 307
12
28
40
52
64
128
Wooden end toeboard 0.73 m
12 51 073
6
8
8
8
8
8
Total price
(€)
3,101.10
6,664.90
9,206.50
11,847.10
14,502.10
Price per sqm
(€ per m²)
30.70
30.43
29.41
29.11
28.95
28.31
Weight
(kg)
1,255.9
2,778.6
3,883.2
5,019.4
6,162.6
12,155.6
ALFIX quick-release anchor
13 62 065
8
15
18
21
24
43
Standard coupler
13 01 019
8
15
18
21
24
43
ALFIX14 multipurpose plug
37 00 000
8
15
18
21
24
43
Eyebolt 12 x 120 mm
37 02 120
8
15
18
21
24
43
Cap
37 01 001
8
15
18
21
24
43
Total price
(€)
Weight
(kg)
Aluminium frame platform with
hatch-type access and integrated aluminium storey ladder 3.07 x 0.60 m
12 04 307
Surcharge
(€)
Short weight
(kg)
Aluminium frame platform
3.07 x 0.60 m
12 01 307
Surcharge
(€)
213.60
498.40
712.00
925.60
1,139.20
2,278.40
Short weight
(kg)
320.4
747.6
1,068.0
1,388.4
1,708.8
3,417.6
Steel plank 3.07 x 0.32 m
12 21 307
Surcharge
(€)
Short weight
(kg)
Assembly frame, aluminium
2.00 x 0.73 m
10 00 200
Surcharge
(€)
357.75
Short weight
(kg)
183.0
28,368.70
133.76
250.80
300.96
351.12
401.28
718.96
27.2
51.0
61.2
71.4
81.6
146.2
3
4
4
4
4
4
405.00
540.00
540.00
540.00
540.00
540.00
68.4
91.2
91.2
91.2
91.2
91.2
12
28
24
40
56
52
80
64
104
128
128
256
216.00
504.00
720.00
936.00
1,152.00
2,304.00
14.4
33.6
48.0
62.4
76.8
153.6
15
32
Catalogue and Price List ALFIX Façade Scaffold
44
56
68
132
763.20
1,049.40
1,335.60
1,621.80
3,148.20
390.4
536.8
683.2
829.6
1,610.4
Scaffolding Examples
ALFIX façade scaffold 0.73 m according to the price list
Assembly frame,
aluminium
Alternative scaffold decks
Scaffold access
Scaffold anchoring
Basic equipment
2.57 m
Bay length of scaffold: 2.57 m
Scaffold length x working height
(m)
Scaffold surface
12.85 x 8.20
20.56 x 10.20
30.84 x 10.20
41.12 x 10.20
48.83 x 10.20
100.23 x 10.20
105 m2
210 m2
315 m2
419 m2
498 m2
1022 m2
Base jack 0.40 m
11 51 040
12
18
26
34
40
80
Assembly frame 2.00 x 0.73 m
10 11 200L
18
36
52
68
80
160
Solid wood deck 2.57 x 0.32 m
12 31 257
30
64
96
128
152
312
Rear guardrail 2.57 m
10 60 257
35
72
108
144
171
351
Double end guadrail 0.73 m
10 62 073
4
6
6
6
6
6
Diagonal brace 3.20 m
11 00 320
3
8
12
16
16
32
Guardrail post 0.73 m
10 64 073L
4
7
11
15
18
38
End guardrail frame 0.73 m
10 63 074L
2
2
2
2
2
2
Wooden toeboard 2.57 m
12 50 257
15
32
48
64
76
156
Wooden end toeboard 0.73 m
12 51 073
6
8
8
8
8
8
Total price
(€)
3,520.30
7,016.10
10,255.90
13,495.70
15,854.00
Price per sqm
(€ je m2)
33.53
33.41
32.56
32.21
31.84
31.27
Weight
(kg)
1,337.2
2,724.4
4,017.60
5,310.80
6,258.80
12,695.60
ALFIX quick-release anchor
13 62 065
8
16
20
24
28
55
Standard coupler
13 01 019
8
16
20
24
28
55
ALFIX14 multipurpose plug
37 00 000
8
16
20
24
28
55
Eyebolt 12 x 120 mm
37 02 120
8
16
20
24
28
55
Cap
37 01 001
8
16
20
24
28
55
Total price
(€)
Weight
(kg)
Aluminium frame platform with
hatch-type access and integrated aluminium storey ladder 2.57 x 0.60 m
12 04 257
Surcharge
(€)
Short weight
(kg)
Aluminium frame platform
2.5 x 0.60 m
12 01 257
Surcharge
(€)
168.75
360.00
540.00
720.00
855.00
1,755.00
Short weight
(kg)
336.0
716.8
1,075.2
1,433.6
1,702.4
3,494.4
Steel plank 2.57 x 0.32 m
12 21 257
Surcharge
(€)
Short weight
(kg)
Assembly frame, aluminium
2.00 x 0.73 m
10 00 200
Surcharge
(€)
429.30
Short weight
(kg)
219.6
31,957.60
133.76
267.52
334.40
401.28
468.16
919.60
27.2
54.4
68.0
81.6
95.2
187.0
3
4
4
4
4
4
356.40
475.20
475.20
475.20
475.20
475.20
55.5
74.0
74.0
74.0
74.0
74.0
15
32
30
48
64
64
96
76
128
156
152
312
252.00
537.60
806.40
1,075.20
1,276.80
2,620.80
18.0
38.4
57.6
76.8
91.2
187.2
18
36
52
68
80
160
858.60
1,240.20
1,621.80
1,908.00
3,816.00
439.2
634.4
729.6
976.0
1,952.0
Catalogue and Price List ALFIX Façade Scaffold
41
Technical Details
Load classes of scaffolding decks
Designation
Bay width l (m)
Usage in load
class
≤ 2.07
permissible
6
2.57
permissible
5
3.07
permissible
4
4.14
permissible
3
≤ 1.57
permissible
6
2.07
permissible
5
2.57
permissible
4
3.07
permissible
3
≤ 2.07
permissible
6
2.57
permissible
5
3.07
permissible
4
4.14
-
3
≤ 2.07
permissible
6
2.57
permissible
5
3.07
permissible
4
Aluminium frame platform 0.60 m
≤ 3.07
permissible
3
Aluminium frame platform 0.60 m
≤ 3.07
permissible
3
2.57
permissible
4
3.07
permissible
3
≤ 3.07
permissible
3
Steel plank 0.32 m
Solid wood deck 0.32 m
Solid aluminium deck 0.32 m
Scaffolding decks
Safety and roof safety
scaffolding applications
Solid aluminium deck 0.60 m
with water-resitant screen-printed plywood surface
with hatch-type access and storey ladder
Solid aluminium frame platform 0.60
with hatch-type access and storey ladder
Aluminium frame platform 0.60 m
with hatch-type access, without ladder
Vertical diagonal brace
Parameters of vertical diagonal braces
Bay length (m)
ß = AD / A eff
DR,d (kN)
2.07
44
7.65
2.57
42
6.51
3.07
40
5.37
DR,d
DR,d
Cross-section values of base jacks
Base jack
The equivalent cross-section values of spindle to be used for stress analysis and deformation calculations according to DIN 4425 are to be assumed as follows:
42
A = AS
=
3.52 cm2
I
=
4.00 cm4
Wel
=
2.68 cm3
Wpl
=
1.25 x 2.68 = 3.35 cm3
Catalogue and Price List ALFIX Façade Scaffold
Extracts from DIN EN 12811 standard
Working loads on scaffold layers
Uniformly distributed load q1
in kN/m²
Scaffold layers
Load class
Load concentrated on a 500 mm x
500 mm area, F1 in kN
Load concentrated on a 200 mm x
200 mm area, F2 in kN
Partial area load
q2 in kN/m2
Partial area factor
ap1)
1
0.75
1.50
1.00
-
-
2
1.50
1.50
1.00
-
-
3
2.00
1.50
1.00
-
-
4
3.00
3.00
1.00
5.00
0.4
5
4.50
3.00
1.00
7.50
0.4
6
6.00
3.00
1.00
10.00
0.5
Clearance classes
between scaffold layers and transoms or scaffold retainers h1a and h1b
Shoulder height
h2
h3 ≥ 1.90 m
1.75 m ≤ h1a ≤ 1.90 m
1.75 m ≤ h1b ≤ 1.90 m
h2 ≥ 1.60 m
h2 ≥ 1.90 m
h1a ≥ 1.90 m
h1b ≥ 1.90 m
h2 ≥ 1.75 m
between scaffold layers h3
H1
H2
Width class
w in m
W06
0.6 ≤ w ≤ 0.9
W09
0.9 ≤ w ≤ 1.2
b
open passageway clearance, 500 mm is the minimum requirement, and ( c - 250 mm)
W12
1.2 ≤ w ≤ 1.5
c
clear spacing between posts
W15
1.5 ≤ w ≤ 1.8
W18
1.8 ≤ w ≤ 2.1
h1b, h1b
clear width between scaffold layers and transoms or scaffold retainers
W21
2.1 ≤ w ≤ 2.4
h2
clear shoulder height
W24
2.4 ≤ w
h3
clear height between scaffold layers
p
clear width in the head area; 300 mm is the minimum requirement, and (c - 450 mm)
w
width of scaffold layers
≤ 150
p
≤ 150
h1a
h3 ≥ 1,900
Clear heights and widths of scaffold layers
h2
Scaffold layers
Width classes
h1b
Scaffold layers
Clearance
Class
Designation of a scaffolding system according to EN 12810-1 (example)
Scaffold EN 12810 - 3 D - SW06/250 - H1 - B - LA
Scaffold EN 12810
Frame scaffold (modular scaffold) according to DIN EN 12810-1
b
3
Load class 3 (see Table 3 DIN EN 12811-1
w
D
Vertical drop tests on deck surface
(D = calculated with drop test, N = without drop test)
c
SW06/250
Width class (see Table 1 DIN EN 12811-1)
here between 0.60 m and 0.90 m/bay length 2.50 m
H1
Headroom class (see Table 2 DIN EN 12811-1)
(as a rule, in Germany only H1 is used)
B
with sheeting (A = without sheeting, B = with sheeting)
LA
with ladder (LA = ladder, ST = stairway, LS = with both)
≤ 30
Catalogue and Price List ALFIX Façade Scaffold
43
ALFIX Systemtechnik GmbH
Dorfwiesenweg 13
D-63828 Kleinkahl-Edelbach
Phone +49 (0) 6024 / 6731-0
Fax +49 (0) 6024 / 2064
E-Mail: [email protected]
ALFIX GmbH Rüst- und Lagertechnik
Langhennersdorfer Straße 15
D-09603 Großschirma
Phone +49 (0) 37328 / 800-0
Fax +49 (0) 37328 / 800-80
E-Mail: [email protected]
Sale of:
· Work & safety scaffoldings
· Mobile scaffold towers
· Construction equipment
· Brickwork platforms
· Roofing systems
· Stages and platforms
· Chimney scaffolds
· Shelves
· Accessories
Manufacturer's agent:
Leasing of:
www.alfix.de
09_2009 / 3000 / v 1.00
· Work & safety scaffoldings
· Mobile scaffold towers
· Roofing systems
· Stages and platforms
· Chimney scaffolds