uPAC-VW2 iPod and Auxiliary Input Interface with HD Radio Option for Select Volkswagen Radios VPW Arbitration Class 2 J1850 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 Class 2 EOD J1850 CRC 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 Class 2 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 J1850 Class 2 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 The uPAC-VW2 interface is a multi input media device compatible with select Volkswagen radios. When connected to the included PGHVW2A adapter and used in the 2008 Touareg (Non-Nav) the 2 inputs will support any of the following combinations: iPod/Auxiliary, iPod/HD Radio (HD Radio tuner sold separately) or Auxiliary/HD Radio (HD Radio tuner sold separately). The optional HD Radio tuner is part number uPAC-HDRT. The iPod input can be used with full control from the radio or full control from the iPod. The uPAC-VW2 also fully retains factory installed Satellite Radio. When connected to the included PGHVW2B adapter and used in all Volkswagen vehicles (excluding Beetle), this interface offers basic control of your iPod while adding an additional auxiliary input. Basic control consists of track foward and track back. Please visit www.pac-audio.com for a . complete list of supported vehicles. Configuring the uPAC-VW2 (iPod and Auxiliary Input as devices): After removing the radio from the vehicle, you will need to identify the manufacturer of the radio. If the model number sticker is on the side of the radio it is a Delphi brand radio. If the model number sticker is on the top of the radio it is a Panasonic brand radio. All Dipswitches Off (up) Touareg (Non-Nav) Delphi Radios Dipswitch 1 On (Down) Panasonic Radios Dipswitch 2 On (Down) Touareg (Navigation) The iPod cable should be connected to Device 1. The Auxiliary Input cable should be connected to Device 2. If both the 3.5mm cable and RCA connections are used make sure to only have one of the 2 sources powered at a time. Note: If the optional HD Radio Tuner is used (Touareg Non-Nav ONLY), refer to the uPAC-HDRT’s connection manual for configuration and operation instructions. The USB connection has no function at this time. Connecting to the vehicle: With the key off, plug the dock & lock harness provided with the uPAC-VW2 into the radio. Plug the original dock & lock harness into the receptacle connector provided with the uPAC-VW2. Make sure all other connectors (if any) are reconnected to the factory radio. 09-15-2008 Pacific Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705 [email protected] • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com VPW Arbitration Class 2 J1850 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 Class 2 EOD J1850 CRC Class 2 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 J1850 Class 2 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 Connecting to the vehicle (continued): If installing the uPAC-VW2 into a non-navigation Touareg, connect the 18 pin plug on the PGHVW2A adapter into the 18 pin plug on the VW2 harness and then plug the 24 pin micro-fit connector into the uPAC-VW2 module. If installing the uPAC-VW2 into the Touareg WITH navigation, or ANY other vehicle connect the 18 pin plug on the PGHVW2B adapter into the 18 pin plug on the VW2 harness and then plug the 24 pin micro-fit connector into the uPAC-VW2. Selecting the Input (Touareg Non-Nav): Press the button to scroll through the available sources. Once the source you would like to select is displayed, wait 3 seconds and the radio will select the displayed option. Note: If you are listening to factory Satellite Radio mode, you must first press the TUNE KNOB twice, then use the button to scroll through the available sources. . IPOD AUX1 Controlling the iPod (Touareg Non-Nav): Turning the TUNE KNOB clockwise advances 1 song in an album or playlist. Turning the TUNE KNOB counter-clockwise moves back 1 song in an album or playlist. Browsing: Preset #2 Enters Browse Menu and moves forward to the next step when pressed again. Preset #1 Takes one step back in the Browse Menu. Preset #3 Exits the Browse Menu. Example of Touareg Operation (iPod full control): Press the SAT button Press the button until IPOD is displayed. Press PRESET 2, the radio will display: PL:LIST Turn the TUNE KNOB to select: AR:ARTIST Press PRESET 2; the radio will display AR:ALL Turn the TUNE KNOB to select an artist. Press PRESET 2 to choose that artist. Turn the TUNE KNOB to select an album by the previously selected artist. Press PRESET 2 to choose that album. Turn the TUNE KNOB to select a track from the previously selected album. Press PRESET 2 to choose the track to be played. The track will begin to play and you can select the next or previous track by turning the TUNE KNOB on the radio. 09-15-2008 Pacific Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705 [email protected] • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com VPW Arbitration Class 2 J1850 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 Class 2 EOD J1850 CRC 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 Class 2 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 J1850 Class 2 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 Selecting the Input (Basic Mode): Press the CD button twice to access the uPAC-VW2. PRESET #2 Switches to Auxiliary mode . PRESET #1 Switches back to iPod mode Controlling the iPod (Basic Mode): Turning the TUNE KNOB clockwise advances 1 song in an album or playlist. Turning the TUNE KNOB counter-clockwise moves back 1 song in an album or playlist. 09-15-2008 Pacific Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705 [email protected] • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com
© Copyright 2024