1. technology and computing
2. consumer electronics
3. camera and photo equipment
4. binoculars

2011 L3 WARRIOR SYSTEMS CATALOG – EOTECH, INSIGHT & EOS.
EOTECH
THE HOLOGRAPHIC ADVANTAGE
In holography, all the information required to reconstruct the reticle image is recorded everywhere in the Heads-Up Display window. If the
window is obstructed by mud, snow, rain, etc., the HWS® remains fully operational, with point of aim/impact being maintained. Even in such
extreme cases where the front window is shattered, the HWS® is fully functional and the zero is maintained! As long as the operator can see
through any portion of the window, the entire reticle pattern is visible on target. The operator can still engage with confidence!
ABOUT EOTECH
– SPEED. ACCURACY.. VICT
TORY.
BATTLE PROVEN
The HWS® has been designed and tested to provide consistent,
L-3 EOTech, Inc. develops and manufactures products that leverage its advance electro-optics technologies.
reliable performance, even in the most hostile operating
The advanced holographic weapon sight produced by L-3 EOTech has revolutionized electronic sighting technology
environments. The HWS® is waterproof (submersible), fog-proof,
and is being adopted rapidly by the elite units in the military and law enforcement agencies around the world as
shock-proof, and withstands extreme temperature variations.
their preferred and standard close quarter battle (CQB) optic for small arms. When used in CQB, this revolutionary
The HWS® meets military drop test requirements with no
weapon optic delivers amazing speed and accuracy gains as well as uncompromising use of peripheral vision.
functional degradation to the weapon optic and holds zero to
For more information about EOTech and our products please visit us online at www.L-3com.com/eotech
within 2 MOA! Every HWS® is extensively tested in a punishing
recoil simulator generating 1,600 G’s of acceleration in less than
TABLE OF CONTENTS
EOTECH
GENERAL SPECS
PRODUCTS
M40GL
EOLAD
EXPS3
EXPS2
553
XPS3
556
552
XPS2-RF
XPS2
516
517
512
G23
MPO II
MPO III
BALLISTIC RETICLE INFORMATION
MOUNTING SOLUTIONS
2
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
10
11
11
11
12
13
1.0 millisecond.
TABLE OF CONTENTS
INSIGHT
2
14-15
16-17
18-22
23-26
27
28-29
30-33
34-35
36-38
39-41
41
NO RETICLE WASHOUT
TACTICAL WEAPON-MOUNTED LIGHTS
LED WEAPON-MOUNTED LIGHTS
XENON WEAPON-MOUNTED LIGHTS
WEAPON-MOUNTED ACCESSORIES
FIT CHARTS
TACTICAL HAND-HELD FLASHLIGHTS
MINI RED-DOT SIGHTS
AIMING AND ILLUMINATION
IMAGING PRODUCTS
PRECISION TARGET PRODUCTS
HEADS UP, FULL VIEW
Engagement with two eyes open is a must. The HWS® employs
a true Heads-Up Display that eliminates blind spots, constricted
vision, or the tunnel vision associated with tubed sights. All user
controls are flush to the HWS®’s streamlined housing with no
protruding knobs, battery compartments or mounting rings that
block the shooters vision of the target area. True, two eyes open
shooting is realized. Instant threat identification is achieved
by maximizing the operator’s peripheral vision and ultimately
gaining greater control of the engagement zone. The end result
- operators achieve maximum situational awareness.
NO REVEALING SIGNATURE
The HWS® is a passive weapon optic and does not emit any
muzzle side, position revealing light signature. The projected
reticle pattern is visible only to the operator. Even Gen III night
vision equipment cannot detect muzzle side signature of the
operator’s position. The result – the operator remains absolutely
undetectable in any operating environment.
The HWS®’s 30 brightness settings (10 settings in NV mode)
ensure the holographic reticle can be instantly viewed in ALL
types of lighting environments, cluttered backgrounds and
target colors. The HWS® delivers an impressive 30,000,000:1
bright to low reticle contrast ratio to ensure the reticle is always
clearly viewable. Reticles can be easily seen against white
targets in full sunlight – even in desert or tundra environments.
With the HWS®, there are no reticle “wash out” conditions
as seen in red dot sighting systems. For extreme low light
conditions, engaging the HWS®’s night vision mode allows the
TABLE OF CONTENTS
ELECTRO-OPTICAL SYSTEMS
2
NIGHT VISION GOGGLES
NIGHT VISION WEAPON SIGHTS
HAND HELD THERMAL
2
42
43-44
45-46
47
reticle pattern to be viewed in tandem with the most advanced
night vision systems on the market today. The 30 brightness
settings provide the operator the flexibility to adjust for optimal
conditions in today’s ever changing battlefields.
3
EOTECH
THE HOLOGRAPHIC ADVANTAGE
In holography, all the information required to reconstruct the reticle image is recorded everywhere in the Heads-Up Display window. If the
window is obstructed by mud, snow, rain, etc., the HWS® remains fully operational, with point of aim/impact being maintained. Even in such
extreme cases where the front window is shattered, the HWS® is fully functional and the zero is maintained! As long as the operator can see
through any portion of the window, the entire reticle pattern is visible on target. The operator can still engage with confidence!
ABOUT EOTECH
– SPEED. ACCURACY.. VICT
TORY.
BATTLE PROVEN
The HWS® has been designed and tested to provide consistent,
L-3 EOTech, Inc. develops and manufactures products that leverage its advance electro-optics technologies.
reliable performance, even in the most hostile operating
The advanced holographic weapon sight produced by L-3 EOTech has revolutionized electronic sighting technology
environments. The HWS® is waterproof (submersible), fog-proof,
and is being adopted rapidly by the elite units in the military and law enforcement agencies around the world as
shock-proof, and withstands extreme temperature variations.
their preferred and standard close quarter battle (CQB) optic for small arms. When used in CQB, this revolutionary
The HWS® meets military drop test requirements with no
weapon optic delivers amazing speed and accuracy gains as well as uncompromising use of peripheral vision.
functional degradation to the weapon optic and holds zero to
For more information about EOTech and our products please visit us online at www.L-3com.com/eotech
within 2 MOA! Every HWS® is extensively tested in a punishing
recoil simulator generating 1,600 G’s of acceleration in less than
TABLE OF CONTENTS
EOTECH
GENERAL SPECS
PRODUCTS
M40GL
EOLAD
EXPS3
EXPS2
553
XPS3
556
552
XPS2-RF
XPS2
516
517
512
G23
MPO II
MPO III
BALLISTIC RETICLE INFORMATION
MOUNTING SOLUTIONS
2
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
10
11
11
11
12
13
1.0 millisecond.
TABLE OF CONTENTS
INSIGHT
2
14-15
16-17
18-22
23-26
27
28-29
30-33
34-35
36-38
39-41
41
NO RETICLE WASHOUT
TACTICAL WEAPON-MOUNTED LIGHTS
LED WEAPON-MOUNTED LIGHTS
XENON WEAPON-MOUNTED LIGHTS
WEAPON-MOUNTED ACCESSORIES
FIT CHARTS
TACTICAL HAND-HELD FLASHLIGHTS
MINI RED-DOT SIGHTS
AIMING AND ILLUMINATION
IMAGING PRODUCTS
PRECISION TARGET PRODUCTS
HEADS UP, FULL VIEW
Engagement with two eyes open is a must. The HWS® employs
a true Heads-Up Display that eliminates blind spots, constricted
vision, or the tunnel vision associated with tubed sights. All user
controls are flush to the HWS®’s streamlined housing with no
protruding knobs, battery compartments or mounting rings that
block the shooters vision of the target area. True, two eyes open
shooting is realized. Instant threat identification is achieved
by maximizing the operator’s peripheral vision and ultimately
gaining greater control of the engagement zone. The end result
- operators achieve maximum situational awareness.
NO REVEALING SIGNATURE
The HWS® is a passive weapon optic and does not emit any
muzzle side, position revealing light signature. The projected
reticle pattern is visible only to the operator. Even Gen III night
vision equipment cannot detect muzzle side signature of the
operator’s position. The result – the operator remains absolutely
undetectable in any operating environment.
The HWS®’s 30 brightness settings (10 settings in NV mode)
ensure the holographic reticle can be instantly viewed in ALL
types of lighting environments, cluttered backgrounds and
target colors. The HWS® delivers an impressive 30,000,000:1
bright to low reticle contrast ratio to ensure the reticle is always
clearly viewable. Reticles can be easily seen against white
targets in full sunlight – even in desert or tundra environments.
With the HWS®, there are no reticle “wash out” conditions
as seen in red dot sighting systems. For extreme low light
conditions, engaging the HWS®’s night vision mode allows the
TABLE OF CONTENTS
ELECTRO-OPTICAL SYSTEMS
2
NIGHT VISION GOGGLES
NIGHT VISION WEAPON SIGHTS
HAND HELD THERMAL
2
42
43-44
45-46
47
reticle pattern to be viewed in tandem with the most advanced
night vision systems on the market today. The 30 brightness
settings provide the operator the flexibility to adjust for optimal
conditions in today’s ever changing battlefields.
3
GENE
ERA
AL SP
PECS/N
NEW PRODUCTS
HWS® MODELS
general specifications for all models
OPERATION
Optics: Holography – parallax free
Magnification: 1x
Eye Relief: Unlimited
Temperature: -40° to 150° F
Sealing: Internally fog-proofed optics
Adjustment (per click): 0.5 MOA (1/2” at 100 yds)
Adjustment Range: +/- 40 MOA travel
HEADS-UP-DISPLAY WINDOW
ELECTRICAL
Optical Surfaces: Anti-reflective coating
Brightness Adjustment Range: Normal Mode 146,000:1 over 20 settings.
Window Dimensions: 1.20” x 0.85” (30 x 23mm)
For models with Night Vision Mode 1,280:1 over 10 settings, and a total range of
Front Window Material: 1/8” solid glass
greater than 30,000,000:1
Rear Window Material: Shatter resistant laminate (3/16” thick)
Brightness Settings: 30 settings with scrolling feature (10 settings for NV use)
Field of View (100 yds): 30 yds (28m) at a 4” eye relief
Auto Battery Check Indicator: Flashing reticle upon start-up when battery is low
Standard Reticle: 65MOA circle with quadrant ticks
Auto Shut-down: At 8 hrs - programmable to 4 hrs
with 1 MOA aiming dot
NEW PRODUCTS FOR 2011
XPS2-RF
™
NEW
EOTech introduces the XPS2-RF (Rimfire),
the first holographic weapon sight dedicated
exclusively to the rimfire platform.
The integrated base is designed
specifically for the 3/8” dovetail
found on most classic style
rimfire rifles. Perfect for small
game or plinking, the HWS
makes shooting fun.
™
EXPS3-Tan
™
By popular demand, the EXPS3 HWS® is now
w
offered in flat dark earth (FDE). The EXPS is
the ultimate CQB optic and perfect
for all of the new modular rifle
designs offered in this color
scheme. The EXPS3-Tan
features a single, quick
release throw lever for easy
attachment and removal.
4
NEW
To compliment the new Tan EXPS3, EOTech
h is
introducing the G23, fixed 3X magnifier in
flat dark earth (FDE). Offering the
same quick transition from 1X
to 3X via the flip-to-side (FTS)
mount, the G23 dramatically
increases the shooters
accuracy without sacrificing
speed to target.
MPO II & III
NEW
™
The new MPO II & III consists of the EXPS,
S,
the ultimate HWS®. This reduces
the overall length of the
system by over 2 inches.
The MPO II still offers the
ballistic reticle and
side operating
buttons, but now
offers quick release
throw levers on both
the HWS® and G23
components.
NEW
M40GL
™
ECOS-GL (Grenade Launcher Sight)
Order Code : M40GLTAN or M40GLBLK
Battery Type: Single 3V Lithium CR 123 Battery
Reticle Pattern: Ranging Reticle of 10m increments
Battery Life: Approx. 300 hours at nominal level 15
Brightness Settings: 30 levels (20 day/10 for NV)
Length/Width/Height: 2.6”x1.7”x3.4” (66x43.1x86.4mm)
Weight: 9 oz (255 grams)
Waterproof: Submersible to 66 ft (2 atmosphere) depth
Color/Finish: Dark Earth with hard coat finish or Black
Return to Zero: Repeatable up to 4MOA upon re-mounting
Mounting: MIL-STD 1913 rail
NSN: 1240-01-566-2844
Features:
• Two eyes open shooting
• Night Vision compatible
• Compensates for spin drift
• Mounts to MIL-STD quad rail
model
G23-Tan
™
model
EOTECH
EOTECH
H–
NIGHT
T VISION COMPATIB
BLE
Military Designation:
SU-253/PEQ (FDE)
NSN: 1240-01-566-2844
EOLAD
™
552 with integrated laser aiming device
Order Code : See bottom of page for details
Length/Width/Height: 5.4”x2.9”x2.4” (137x74x61mm)
Weight: 16.8 oz (476.3 grams)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non reflective black with hard coat finish
Laser Type: Visible pointer Laser Class IIIa IR pointer /
IR illuminator Laser Class IIIb
Power Output:
-Hi-Power Visible pointer-5mW
-Hi-Power IR pointer/IR illuminator-25mW–100mW
-Lo-Power Visible/IR pointer/IR illuminator-1mW
Wavelength: Visible pointer 635nm
-IR pointer / IR illuminator 835nm
Beam Diameter: Visible / IR pointer 8mm @ 25 meters
Beam Divergence: IR illuminator 0–6 degrees
Range/Visibility:
-Visible pointer-450 meters (low light) / 30 meters daytime
-Lo-Power IR pointer/IR illuminator-600 meters
-Hi-Power IR pointer/IR illuminator-2000 meters
Power Source: 2x 1.5V AA batteries
(supports lithium, alkaline, or rechargeable)
Battery Life: 5 hours with continuous laser operation
The EOLAD is available in the following models.
• EOLAD-2S—with infrared laser (835nm) (<40mW) and
focusable infrared illuminator (835nm) (<120mW)
• EOLAD 2VI—with visible GREEN laser (532nm) (<30mW)
and focusable infrared illuminator (835nm) (<40mW)
• EOLAD 2VI—with visible RED laser (635nm) (<5mW)
and focusable infrared illuminator (835nm) (<40mW)
• EOLAD 1V—with visible GREEN laser (532nm) (<5mW)
• EOLAD 1V—wih visible RED laser (635nm) (<5mW)
For Model 552.A65 HWS® Specifi cations, see pg 9
All EOLAD models are integrated on the Model 552.A65 HWS®
(see page 9 for specifications and details).
• The model EOLAD 1V is controlled under the Export Administration Regulations
(EAR) ECCN 0A987, and may not be exported to a Foreign Person, either in the U.S.
or abroad, without a license or exception from the U.S. Department of Commerce.
• All other EOLAD models are controlled under the International Traffic in
Arms Regulations (ITAR) USML Category XII(b), and may not be exported
to a Foreign Person, either in the U.S. or abroad, without a license or
exception from the U.S. Department of State.
• The M40GL is controlled under the International Traffic in
Arms Regulations (ITAR) USML Category IV(h), and may
not be exported to a Foreign Person, either in the
U.S. or abroad, without a license or exception
from the U.S. Department of State.
5
GENE
ERA
AL SP
PECS/N
NEW PRODUCTS
HWS® MODELS
general specifications for all models
OPERATION
Optics: Holography – parallax free
Magnification: 1x
Eye Relief: Unlimited
Temperature: -40° to 150° F
Sealing: Internally fog-proofed optics
Adjustment (per click): 0.5 MOA (1/2” at 100 yds)
Adjustment Range: +/- 40 MOA travel
HEADS-UP-DISPLAY WINDOW
ELECTRICAL
Optical Surfaces: Anti-reflective coating
Brightness Adjustment Range: Normal Mode 146,000:1 over 20 settings.
Window Dimensions: 1.20” x 0.85” (30 x 23mm)
For models with Night Vision Mode 1,280:1 over 10 settings, and a total range of
Front Window Material: 1/8” solid glass
greater than 30,000,000:1
Rear Window Material: Shatter resistant laminate (3/16” thick)
Brightness Settings: 30 settings with scrolling feature (10 settings for NV use)
Field of View (100 yds): 30 yds (28m) at a 4” eye relief
Auto Battery Check Indicator: Flashing reticle upon start-up when battery is low
Standard Reticle: 65MOA circle with quadrant ticks
Auto Shut-down: At 8 hrs - programmable to 4 hrs
with 1 MOA aiming dot
NEW PRODUCTS FOR 2011
XPS2-RF
™
NEW
EOTech introduces the XPS2-RF (Rimfire),
the first holographic weapon sight dedicated
exclusively to the rimfire platform.
The integrated base is designed
specifically for the 3/8” dovetail
found on most classic style
rimfire rifles. Perfect for small
game or plinking, the HWS
makes shooting fun.
™
EXPS3-Tan
™
By popular demand, the EXPS3 HWS® is now
w
offered in flat dark earth (FDE). The EXPS is
the ultimate CQB optic and perfect
for all of the new modular rifle
designs offered in this color
scheme. The EXPS3-Tan
features a single, quick
release throw lever for easy
attachment and removal.
4
NEW
To compliment the new Tan EXPS3, EOTech
h is
introducing the G23, fixed 3X magnifier in
flat dark earth (FDE). Offering the
same quick transition from 1X
to 3X via the flip-to-side (FTS)
mount, the G23 dramatically
increases the shooters
accuracy without sacrificing
speed to target.
MPO II & III
NEW
™
The new MPO II & III consists of the EXPS,
S,
the ultimate HWS®. This reduces
the overall length of the
system by over 2 inches.
The MPO II still offers the
ballistic reticle and
side operating
buttons, but now
offers quick release
throw levers on both
the HWS® and G23
components.
NEW
M40GL
™
ECOS-GL (Grenade Launcher Sight)
Order Code : M40GLTAN or M40GLBLK
Battery Type: Single 3V Lithium CR 123 Battery
Reticle Pattern: Ranging Reticle of 10m increments
Battery Life: Approx. 300 hours at nominal level 15
Brightness Settings: 30 levels (20 day/10 for NV)
Length/Width/Height: 2.6”x1.7”x3.4” (66x43.1x86.4mm)
Weight: 9 oz (255 grams)
Waterproof: Submersible to 66 ft (2 atmosphere) depth
Color/Finish: Dark Earth with hard coat finish or Black
Return to Zero: Repeatable up to 4MOA upon re-mounting
Mounting: MIL-STD 1913 rail
NSN: 1240-01-566-2844
Features:
• Two eyes open shooting
• Night Vision compatible
• Compensates for spin drift
• Mounts to MIL-STD quad rail
model
G23-Tan
™
model
EOTECH
EOTECH
H–
NIGHT
T VISION COMPATIB
BLE
Military Designation:
SU-253/PEQ (FDE)
NSN: 1240-01-566-2844
EOLAD
™
552 with integrated laser aiming device
Order Code : See bottom of page for details
Length/Width/Height: 5.4”x2.9”x2.4” (137x74x61mm)
Weight: 16.8 oz (476.3 grams)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non reflective black with hard coat finish
Laser Type: Visible pointer Laser Class IIIa IR pointer /
IR illuminator Laser Class IIIb
Power Output:
-Hi-Power Visible pointer-5mW
-Hi-Power IR pointer/IR illuminator-25mW–100mW
-Lo-Power Visible/IR pointer/IR illuminator-1mW
Wavelength: Visible pointer 635nm
-IR pointer / IR illuminator 835nm
Beam Diameter: Visible / IR pointer 8mm @ 25 meters
Beam Divergence: IR illuminator 0–6 degrees
Range/Visibility:
-Visible pointer-450 meters (low light) / 30 meters daytime
-Lo-Power IR pointer/IR illuminator-600 meters
-Hi-Power IR pointer/IR illuminator-2000 meters
Power Source: 2x 1.5V AA batteries
(supports lithium, alkaline, or rechargeable)
Battery Life: 5 hours with continuous laser operation
The EOLAD is available in the following models.
• EOLAD-2S—with infrared laser (835nm) (<40mW) and
focusable infrared illuminator (835nm) (<120mW)
• EOLAD 2VI—with visible GREEN laser (532nm) (<30mW)
and focusable infrared illuminator (835nm) (<40mW)
• EOLAD 2VI—with visible RED laser (635nm) (<5mW)
and focusable infrared illuminator (835nm) (<40mW)
• EOLAD 1V—with visible GREEN laser (532nm) (<5mW)
• EOLAD 1V—wih visible RED laser (635nm) (<5mW)
For Model 552.A65 HWS® Specifi cations, see pg 9
All EOLAD models are integrated on the Model 552.A65 HWS®
(see page 9 for specifications and details).
• The model EOLAD 1V is controlled under the Export Administration Regulations
(EAR) ECCN 0A987, and may not be exported to a Foreign Person, either in the U.S.
or abroad, without a license or exception from the U.S. Department of Commerce.
• All other EOLAD models are controlled under the International Traffic in
Arms Regulations (ITAR) USML Category XII(b), and may not be exported
to a Foreign Person, either in the U.S. or abroad, without a license or
exception from the U.S. Department of State.
• The M40GL is controlled under the International Traffic in
Arms Regulations (ITAR) USML Category IV(h), and may
not be exported to a Foreign Person, either in the
U.S. or abroad, without a license or exception
from the U.S. Department of State.
5
NIGHT VISION COM
MPA
ATIB
BLE
EXPS3
model
™
Order Code : EXPS3
Length/Width/Height:
3.5”x2.2”x2.8”
(91.4x55.8x71.8mm)
Weight: 11.2 oz (317 g)
Waterproof: Submersible to
33 ft depth
Color/Finish: Non Reflective black
with hard coat finish, and
NEW Flat Dark Earth
Mount: 1” Weaver or (MIL-STD- 1913) rail.
Adjustable for width variation.
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility:
(10 brightness settings) for generation I-III+
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following reticles:
65 MOA ring with single 1MOA dot, 65 MOA ring with (2) 1MOA dots,
or 65 MOA ring with (4) 1MOA dots
NEW
Military Designation:
SU-231A/PEQ (FDE)
NSN: 1240-01-587-9345
Features
• Single transverse 123 battery to reduce sight length.
• Shortened base only requires at most 2 ¾” of rail space compared to the 4” N battery sights.
• Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap. Better sealing is achieved.
• Battery compartment is now separated from the base to allow it to hover over delta ring of rifle.
• Average battery life at brightness level 12 is roughly 600 hours, tripling the battery life of the N sights.
• Models include one of the following reticle options:
0- 65MOA ring with 1 MOA aiming dot., 2- 65MOA ring with (2) 1 MOA aiming dots.,
4- 65MOA ring with (4) 1 MOA aiming dots. (Black model only)
™
NEW
Order Code : EXPS2
Length/Width/Height: 3.5”x2.2”x2.8” (91.4x55.8x71.8mm)
Weight: 11.2 oz (317 g)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount:1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within
2MOA after re-mounting
Night Vision Compatibility: None
0
2
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following reticles:
65 MOA ring with single 1MOA dot, 65 MOA ring with (2) 1MOA dots
This sight is smaller than the former N-cell battery sight (511/551) and runs on single
123 battery. It also has a longer battery life than the N-cell style sights. Smaller, lighter and
always fast. With the single battery configuration, the EXPS allows more rail space than ever,
leaving more room for rear iron sights.
The HWS® Model EXPS are controlled under the Export Administration Regulations (EAR) ECCN 0A987, and may not be exported to a
Foreign Person, either in the U.S. or abroad, without a license or exception from the U.S. Department of Commerce.
6
A65
The optic of choice for the entire US Special Operations Command
Military Designation:
SU-231/PEQ (FDE)
NSN: 1240-01-533-0941
model
0
EXPS2
™
Order Code: 553.A65BLK or 553.A65TAN
Length/Width/Height: 4.9”x2.2”x2.8” (124x55.8x71 mm)
Weight: 12.3 oz
Waterproof: Submersible to 66 ft depth
Color/Finish: Flat Dark Earth (non-reflective black on some small
components) or Non reflective black with hard coat finish
Mount: USSOCOM requirements dictated dual quick release
throw levers designed specifically for the Picatinny
(mil-std-1913) mounting rail
- Certain commercial variants of the mil-std-1913 rail
specification may not be compatible with the
Model 553 mounting assembly
- Model 553 bases consist of (2) ARMS® throw levers
and is only adaptable to rails that properly accept
the ARMS® design
Return to Zero: Repeatable to within
1 MOA after re-mounting
Night Vision Brightness Range: 1,280:1 with NV switch engaged
Power Source: 2 x 123 lithium batteries
Battery Life: 1100 continuous hours at nominal setting 12
Note: The (4) aiming dots may not be distinguishable without magnification
model
553
EOTECH
model
NIGHT VIS
SION COMP
PAT
TIBLE
2
4
XPS3
™
Order Code : XPS3
Length/Width/Height: 3.5”x2”x2.4” (91.4x50.8x60.9mm)
Weight: 8.0 oz (227 g)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount:1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility: (10 brightness settings) for generation I-III+
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following reticles: 65 MOA ring
with Single 1MOA dot , (2) 1MOA dots and 65MOA ring;
0
2
The HWS® Model 553 are controlled under the International Traffic in Arms Regulations (ITAR) USML Category I(f),
and may not be exported to a Foreign Person, either in the U.S. or abroad, without a license or exemption
from the U.S. Department of State.
The HWS® Model XPS are controlled under the Export Administration Regulations (EAR) ECCN 0A987,
and may not be exported to a Foreign Person, either in the U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
7
NIGHT VISION COM
MPA
ATIB
BLE
EXPS3
model
™
Order Code : EXPS3
Length/Width/Height:
3.5”x2.2”x2.8”
(91.4x55.8x71.8mm)
Weight: 11.2 oz (317 g)
Waterproof: Submersible to
33 ft depth
Color/Finish: Non Reflective black
with hard coat finish, and
NEW Flat Dark Earth
Mount: 1” Weaver or (MIL-STD- 1913) rail.
Adjustable for width variation.
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility:
(10 brightness settings) for generation I-III+
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following reticles:
65 MOA ring with single 1MOA dot, 65 MOA ring with (2) 1MOA dots,
or 65 MOA ring with (4) 1MOA dots
NEW
Military Designation:
SU-231A/PEQ (FDE)
NSN: 1240-01-587-9345
Features
• Single transverse 123 battery to reduce sight length.
• Shortened base only requires at most 2 ¾” of rail space compared to the 4” N battery sights.
• Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap. Better sealing is achieved.
• Battery compartment is now separated from the base to allow it to hover over delta ring of rifle.
• Average battery life at brightness level 12 is roughly 600 hours, tripling the battery life of the N sights.
• Models include one of the following reticle options:
0- 65MOA ring with 1 MOA aiming dot., 2- 65MOA ring with (2) 1 MOA aiming dots.,
4- 65MOA ring with (4) 1 MOA aiming dots. (Black model only)
™
NEW
Order Code : EXPS2
Length/Width/Height: 3.5”x2.2”x2.8” (91.4x55.8x71.8mm)
Weight: 11.2 oz (317 g)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount:1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within
2MOA after re-mounting
Night Vision Compatibility: None
0
2
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following reticles:
65 MOA ring with single 1MOA dot, 65 MOA ring with (2) 1MOA dots
This sight is smaller than the former N-cell battery sight (511/551) and runs on single
123 battery. It also has a longer battery life than the N-cell style sights. Smaller, lighter and
always fast. With the single battery configuration, the EXPS allows more rail space than ever,
leaving more room for rear iron sights.
The HWS® Model EXPS are controlled under the Export Administration Regulations (EAR) ECCN 0A987, and may not be exported to a
Foreign Person, either in the U.S. or abroad, without a license or exception from the U.S. Department of Commerce.
6
A65
The optic of choice for the entire US Special Operations Command
Military Designation:
SU-231/PEQ (FDE)
NSN: 1240-01-533-0941
model
0
EXPS2
™
Order Code: 553.A65BLK or 553.A65TAN
Length/Width/Height: 4.9”x2.2”x2.8” (124x55.8x71 mm)
Weight: 12.3 oz
Waterproof: Submersible to 66 ft depth
Color/Finish: Flat Dark Earth (non-reflective black on some small
components) or Non reflective black with hard coat finish
Mount: USSOCOM requirements dictated dual quick release
throw levers designed specifically for the Picatinny
(mil-std-1913) mounting rail
- Certain commercial variants of the mil-std-1913 rail
specification may not be compatible with the
Model 553 mounting assembly
- Model 553 bases consist of (2) ARMS® throw levers
and is only adaptable to rails that properly accept
the ARMS® design
Return to Zero: Repeatable to within
1 MOA after re-mounting
Night Vision Brightness Range: 1,280:1 with NV switch engaged
Power Source: 2 x 123 lithium batteries
Battery Life: 1100 continuous hours at nominal setting 12
Note: The (4) aiming dots may not be distinguishable without magnification
model
553
EOTECH
model
NIGHT VIS
SION COMP
PAT
TIBLE
2
4
XPS3
™
Order Code : XPS3
Length/Width/Height: 3.5”x2”x2.4” (91.4x50.8x60.9mm)
Weight: 8.0 oz (227 g)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount:1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility: (10 brightness settings) for generation I-III+
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following reticles: 65 MOA ring
with Single 1MOA dot , (2) 1MOA dots and 65MOA ring;
0
2
The HWS® Model 553 are controlled under the International Traffic in Arms Regulations (ITAR) USML Category I(f),
and may not be exported to a Foreign Person, either in the U.S. or abroad, without a license or exemption
from the U.S. Department of State.
The HWS® Model XPS are controlled under the Export Administration Regulations (EAR) ECCN 0A987,
and may not be exported to a Foreign Person, either in the U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
7
NIGHT VISION COMPATIB
BLE
556
Order Code: 556.A65
Length/Width/Height: 5.0”x2.4”x2.8”
(126x60.9x71mm)
Weight: 11.9 oz (372 grams)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 1 MOA after re-mounting
Night Vision Brightness Range: 1,280:1 with NV switch engaged
Power Source: 2 x 123 lithium batteries
Battery Life: 1,100 continuous hours at nominal setting 12
™
model
XPS2-RF
™
Order Code : XPS2-RF
Length/Width/Height: 3.5”x2”x2.2” (91.4x50.8x55.8mm)
Weight: 7.0 oz (197 g)
Waterproof: Resistant
Color/Finish: Non Reflective black
Mount: 3/8” Dovetail (does not work with 1” Weaver or 1913 rails)
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility: None
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options:
0
65 MOA ring with Single 1MOA aiming dot
552
XR308
3/8” dovetail lock with no cross bolt
model
XPS2
™
Order Code : XPS2
Length/Width/Height: 3.5”x2”x2.4” (91.4x50.8x60.9mm)
Weight: 8.0 oz (227 g)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount:1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility: None
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following
reticles: 65 MOA ring with Single 1MOA dot; Single 1MOA aiming dot;
(2) 1MOA dots and 65MOA ring; FN Less Lethal and SAGE Less Lethal
A65
The HWS® Model 556 are controlled under the International Traffic in Arms Regulations (ITAR)
USML Category I(f), and may not be exported to a Foreign Person, either in the U.S. or abroad, without a
license or exemption from the U.S. Department of State.
The HWS® Model 552 is controlled under the Export Administration Regulations (EAR) ECCN 0A987,
and may not be exported to a Foreign Person, either in the U.S. or abroad, without a license
or exception from the U.S. Department of Commerce.
8
Note: This model is not intended or warranted for
calibers other than .22LR or smaller
™
Order Code: 552.A65
Length/Width/Height: 5.4”x2”x2.25” (137x50.8x57mm)
Weight: 10.9 oz (310 grams)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non reflective black with hard coat finish
Mount: 1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 1 MOA after re-mounting
Night Vision Brightness Range: 1,280:1 with NV switch engaged
Power Source: 2x 1.5V AA batteries
(supports lithium, alkaline, or rechargeable)
Battery Life: 1,000 continuous hours (lithium) at nominal
setting 12; 600 continuous with AA alkaline
NSN: 1240-01-492-5264 (552.A65)
Reticle Options: XR500, XR308,
65 MOA ring with Single 1 MOA aiming dot
XR500
NEW
EOTech is proud to introduce the
first ever holographic sight designed
specifically for rimfire rifles. Ideal for small
game hunting, high speed target shooting and
family or youth plinking, this HWS makes rimfire
shooting even more fun. The hood was removed
for a more streamlined appearance and the
integrated base mounts to any of the 3/8 dovetail
rails found on millions of fielded rimfires in use.
A65
model
EOTECH
model
NON-NIIGHT
T VISION
0
1
2
FN
SAGE
The HWS® Model XPS are controlled under the Export Administration Regulations (EAR) ECCN 0A987,
and may not be exported to a Foreign Person, either in the U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
9
NIGHT VISION COMPATIB
BLE
556
Order Code: 556.A65
Length/Width/Height: 5.0”x2.4”x2.8”
(126x60.9x71mm)
Weight: 11.9 oz (372 grams)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 1 MOA after re-mounting
Night Vision Brightness Range: 1,280:1 with NV switch engaged
Power Source: 2 x 123 lithium batteries
Battery Life: 1,100 continuous hours at nominal setting 12
™
model
XPS2-RF
™
Order Code : XPS2-RF
Length/Width/Height: 3.5”x2”x2.2” (91.4x50.8x55.8mm)
Weight: 7.0 oz (197 g)
Waterproof: Resistant
Color/Finish: Non Reflective black
Mount: 3/8” Dovetail (does not work with 1” Weaver or 1913 rails)
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility: None
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options:
0
65 MOA ring with Single 1MOA aiming dot
552
XR308
3/8” dovetail lock with no cross bolt
model
XPS2
™
Order Code : XPS2
Length/Width/Height: 3.5”x2”x2.4” (91.4x50.8x60.9mm)
Weight: 8.0 oz (227 g)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount:1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 2MOA after re-mounting
Night Vision Compatibility: None
Power Source: (1) 123 lithium battery
Battery Life: approx. 600 hours
Reticle Options: Models include one of the following
reticles: 65 MOA ring with Single 1MOA dot; Single 1MOA aiming dot;
(2) 1MOA dots and 65MOA ring; FN Less Lethal and SAGE Less Lethal
A65
The HWS® Model 556 are controlled under the International Traffic in Arms Regulations (ITAR)
USML Category I(f), and may not be exported to a Foreign Person, either in the U.S. or abroad, without a
license or exemption from the U.S. Department of State.
The HWS® Model 552 is controlled under the Export Administration Regulations (EAR) ECCN 0A987,
and may not be exported to a Foreign Person, either in the U.S. or abroad, without a license
or exception from the U.S. Department of Commerce.
8
Note: This model is not intended or warranted for
calibers other than .22LR or smaller
™
Order Code: 552.A65
Length/Width/Height: 5.4”x2”x2.25” (137x50.8x57mm)
Weight: 10.9 oz (310 grams)
Waterproof: Submersible to 33 ft depth
Color/Finish: Non reflective black with hard coat finish
Mount: 1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 1 MOA after re-mounting
Night Vision Brightness Range: 1,280:1 with NV switch engaged
Power Source: 2x 1.5V AA batteries
(supports lithium, alkaline, or rechargeable)
Battery Life: 1,000 continuous hours (lithium) at nominal
setting 12; 600 continuous with AA alkaline
NSN: 1240-01-492-5264 (552.A65)
Reticle Options: XR500, XR308,
65 MOA ring with Single 1 MOA aiming dot
XR500
NEW
EOTech is proud to introduce the
first ever holographic sight designed
specifically for rimfire rifles. Ideal for small
game hunting, high speed target shooting and
family or youth plinking, this HWS makes rimfire
shooting even more fun. The hood was removed
for a more streamlined appearance and the
integrated base mounts to any of the 3/8 dovetail
rails found on millions of fielded rimfires in use.
A65
model
EOTECH
model
NON-NIIGHT
T VISION
0
1
2
FN
SAGE
The HWS® Model XPS are controlled under the Export Administration Regulations (EAR) ECCN 0A987,
and may not be exported to a Foreign Person, either in the U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
9
NON-NIGHT VISIION
516
Order Code: 516.A65
Length/Width/Height: 5.0”x2.4”x2.8”
(126x60.9x71mm)
Weight: 11.9 oz (372 grams)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 1 MOA after re-mounting
Night Vision Compatibility: None
Power Source: (2) 3.0V Lithium 123 batteries
Battery Life: 1,100 continuous hours at nominal setting 12
model
517
512
A65
G23
™
Order Code: G23.FTS or G23.FTS Tan
Magnification Fixed: 3.25X
Eye Relief: 1.97 in. (50mm) Field of View: 6 degrees
Length: 4.6 in. (116mm)
Weight: 11.9oz (372g)
Temperature: -40F-160F
Waterproof: 33ft
Color/Finish: Black
Mount: MIL-STD-1913 rail
Sealing: Fog-proof internal optics
Works with ALL EOTech® Sights!*
NEW
*Each magnifier includes standard base plus a spacer
for sights that are 7mm taller.
model
™
Order Code: 517.A65
Length/Width/Height: 5.6”x2.4”x2.8” (143x60.9x71mm)
Weight: 11.9oz (372g)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount: MIL-STD-1913 rail
Return to Zero: Repeatable to within
1MOA after re-mounting
Night Vision Compatibility: None
Power Source: 2x 1.5V AA batteries (supports lithium, alkaline
or rechargeable)
Battery Life: 1,000 continuous hours (lithium) at normal setting
12; 600 continuous with AA alkaline
Reticle Options: 65MOA ring with 1MOA dot
model
model
™
EOTECH
model
MAGN
NIFIE
ERS
A65
™
Order Code: 512.A65
Length/Width/Height: 5.4”x2”x2.25” (137x50.8x57mm)
Weight: 10.9 oz (310 grams)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non reflective black with hard coat finish,
RealTree APG HD® or Mossy Oak Obsession® patterns
Mount: 1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within
1 MOA after re-mounting
Night Vision Compatibility: None
Power Source: 2x 1.5V AA batteries
(supports lithium, alkaline, or rechargeable)
Battery Life: 1,000 continuous hours
(lithium) at nominal setting 12;
600 continuous with AA alkaline
NSN: 1240-01-554-4488 Black
A65
The HWS® Model 516 and 517 are controlled under the International Traffic in Arms Regulations (ITAR) USML Category I(f), and may not be
exported to a Foreign Person, either in the U.S. or abroad, without a license or exemption from the U.S. Department of State.
MPO II
™
Order Code: MPO II
Length/Width/Height: 8.1” x 2.2” x 2.8” (207.4 x 55 x 71mm)
Weight: 23.1oz (689g)
Temperature: -40F-160F
Waterproof: Submersible to 33ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD-1913) rail
Return to Zero: Repeatable to within 1 MOA
after re-mounting
Night Vision Brightness Range:
1,280:1 with NV switch engaged
Power Source: 1 x 123 Lithium battery
Battery Life: Approx. 600 hours
NEW
4
Aiming dots may not be distinguishable without magnification
model
MPO III
™
NEW
Order Code: MPO III
Length/Width/Height: 8.1” x 2.2” x 2.8” (207.4 x 55 x 71mm)
Weight: 23.1oz (689g)
Temperature: -40F-160F
Waterproof: Submersible to 10ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD-1913) rail
Return to Zero: Repeatable to within
1 MOA after re-mounting
Night Vision Compatibility: None
Power Source: 1 x 123 Lithium battery
Battery Life: Approx. 600 hours
2
The HWS® Model G23, MPO II and MPO III are controlled under the Export Administration Regulations
(EAR) ECCN 0A987, and may not be exported to a Foreign Person, either in the U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
The HWS® Model 512 is controlled under the Export Administration Regulations (EAR) ECCN 0A987, and may not be exported to a
Foreign Person, either in the U.S. or abroad, without a license or exception from the U.S. Department of Commerce.
10
11
NON-NIGHT VISIION
516
Order Code: 516.A65
Length/Width/Height: 5.0”x2.4”x2.8”
(126x60.9x71mm)
Weight: 11.9 oz (372 grams)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD- 1913) rail
Return to Zero: Repeatable to within 1 MOA after re-mounting
Night Vision Compatibility: None
Power Source: (2) 3.0V Lithium 123 batteries
Battery Life: 1,100 continuous hours at nominal setting 12
model
517
512
A65
G23
™
Order Code: G23.FTS or G23.FTS Tan
Magnification Fixed: 3.25X
Eye Relief: 1.97 in. (50mm) Field of View: 6 degrees
Length: 4.6 in. (116mm)
Weight: 11.9oz (372g)
Temperature: -40F-160F
Waterproof: 33ft
Color/Finish: Black
Mount: MIL-STD-1913 rail
Sealing: Fog-proof internal optics
Works with ALL EOTech® Sights!*
NEW
*Each magnifier includes standard base plus a spacer
for sights that are 7mm taller.
model
™
Order Code: 517.A65
Length/Width/Height: 5.6”x2.4”x2.8” (143x60.9x71mm)
Weight: 11.9oz (372g)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non Reflective black with hard coat finish
Mount: MIL-STD-1913 rail
Return to Zero: Repeatable to within
1MOA after re-mounting
Night Vision Compatibility: None
Power Source: 2x 1.5V AA batteries (supports lithium, alkaline
or rechargeable)
Battery Life: 1,000 continuous hours (lithium) at normal setting
12; 600 continuous with AA alkaline
Reticle Options: 65MOA ring with 1MOA dot
model
model
™
EOTECH
model
MAGN
NIFIE
ERS
A65
™
Order Code: 512.A65
Length/Width/Height: 5.4”x2”x2.25” (137x50.8x57mm)
Weight: 10.9 oz (310 grams)
Waterproof: Submersible to 10 ft depth
Color/Finish: Non reflective black with hard coat finish,
RealTree APG HD® or Mossy Oak Obsession® patterns
Mount: 1” Weaver or (MIL-STD- 1913) rail
Return to Zero: Repeatable to within
1 MOA after re-mounting
Night Vision Compatibility: None
Power Source: 2x 1.5V AA batteries
(supports lithium, alkaline, or rechargeable)
Battery Life: 1,000 continuous hours
(lithium) at nominal setting 12;
600 continuous with AA alkaline
NSN: 1240-01-554-4488 Black
A65
The HWS® Model 516 and 517 are controlled under the International Traffic in Arms Regulations (ITAR) USML Category I(f), and may not be
exported to a Foreign Person, either in the U.S. or abroad, without a license or exemption from the U.S. Department of State.
MPO II
™
Order Code: MPO II
Length/Width/Height: 8.1” x 2.2” x 2.8” (207.4 x 55 x 71mm)
Weight: 23.1oz (689g)
Temperature: -40F-160F
Waterproof: Submersible to 33ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD-1913) rail
Return to Zero: Repeatable to within 1 MOA
after re-mounting
Night Vision Brightness Range:
1,280:1 with NV switch engaged
Power Source: 1 x 123 Lithium battery
Battery Life: Approx. 600 hours
NEW
4
Aiming dots may not be distinguishable without magnification
model
MPO III
™
NEW
Order Code: MPO III
Length/Width/Height: 8.1” x 2.2” x 2.8” (207.4 x 55 x 71mm)
Weight: 23.1oz (689g)
Temperature: -40F-160F
Waterproof: Submersible to 10ft depth
Color/Finish: Non-reflective black with hard coat finish
Mount: (MIL-STD-1913) rail
Return to Zero: Repeatable to within
1 MOA after re-mounting
Night Vision Compatibility: None
Power Source: 1 x 123 Lithium battery
Battery Life: Approx. 600 hours
2
The HWS® Model G23, MPO II and MPO III are controlled under the Export Administration Regulations
(EAR) ECCN 0A987, and may not be exported to a Foreign Person, either in the U.S. or abroad,
without a license or exception from the U.S. Department of Commerce.
The HWS® Model 512 is controlled under the Export Administration Regulations (EAR) ECCN 0A987, and may not be exported to a
Foreign Person, either in the U.S. or abroad, without a license or exception from the U.S. Department of Commerce.
10
11
EOTECH® RETICL
LES
MOUNTING SOLUTIONS
MOUNTING SOLUTIONS
EOTECH
HOLOGRAPHIC
RETICLE ADVANTAGES
OTHER BALLISTIC RETICLES
The holographic technology that is
exclusive to L-3® EOTech®, provides an
enormous advantage over the red dot competition.
Where the competitors can only provide a single aiming
dot, L-3® EOTech® reticle designs can be fabricated to incorporate
4
XR308
XR500
FN303
SAGE
.223 cal with
.308 cal with
.50 BMG with 661
Less Lethal
Less Lethal
multiple trajectory point of aim/point of impact, range assist scales,
62 gr M855 FMJ 150 gr M59 FMJ
gr M33 FMJ at
Launcher
37mm
and anti-torque or cant visual indicators. With this advanced holographic
at roughly 2,680 at roughly 2,800
roughly 3,000
(.68 cal)
Launcher
technology, the HWS® demonstrates its unique flexibility to solve a number
fps using
fps using
fps using
a 14.5” barrel
a 24.8” barrel
a 44.5” barrel
of fire control issues for a host of applications and weapon platforms.
L-3® EOTech® introduces a 2 dot reticle in the XPS and new EXPS models. This simple reticle design is calibrated to the specific trajectory of
M-4 FLAT TOP CO WITNESS SETUP
Sight positioned on flat top. Co-witnesses and
maintains cheek-weld. We carry Troy Industries
front and rear flip ups and GG&G rear. Order
codes: 9-TROY-FBSRA4 (rear) 9-TROY-FBSA4F
(front) 9-GGG-MAD (rear)
MP5 MID RANGE PROFILE MOUNT
Mid profile positioned mount for MP5, 33, 53, 91,
93, 94, and G3. Maintains access to ghost rings
and supports NV operation.
Order code: 9-BT-21298
TACTICAL SHOTGUN MOUNTS
Saddle mount, no tapping required. For
Remington 870, 1100, 11-87.
Order code: 9-BSQ-16800
MP5 LOW PROFILE MOUNT
Low profile positioned mount for MP5, 33, 53,
91, 93, 94, and G3. Maintains cheek- weld and
supports NV operation. Order code: 9-BT-21262
M-16/AR-15 CARRY HANDLE MOUNT
Positions rail on top of carry handle. Keeps
access to iron sights and has extended rail for NV
systems. Works well with gas mask peripherals.
Order code: 9-ARMS-#2EXT
DROP-IN QUAD RAIL
Quad rail that fits in standard D Ring of 7” AR
platforms. No modification to rifle required.
Simply replaces handguard. Low cost, high
quality. Order code: 9-EOT-QR7
M-16/AR-15 FIXED CANTILEVER MOUNT
Co-witnesses with irons and maintains cheek- weld.
Cantilever mount attaches to carry handle.
Order code: 9-MWG-SAM3AH
the M4 carbine. Although only two dots are provided, this unique pattern provides (4) usable aiming points.
The 2 dot reticle can also be distinguished easily with or without magnification. In addition, this reticle pattern can work on other weapon
platforms and provide (4) aiming points: close, medium and long range (see chart below).
50 yards
and
200 yards
500 yards
2-Dot Reticle
556.A65/1
553.A65BLK
553.A65TAN
552.A65/1
552.XR308
552.XR500
517.A65/1
516.A65/1
512.A65/1
512.MOSSYOAK
512.Realtree
EOLAD
EXPS3-0
EXPS3-2
EXPS3-4
EXPS2-0
EXPS2-2
XPS3-0
XPS3-2
XPS2 0
XPS2-1
XPS2-2
XPS2-FN
XPS2-SAGE
XPS2-RF
12
7 yards
LARUE TACTICAL 1/4” RISER
Riser for flat top AR’s. Mount raises sight 1/4”, and
places irons in sighting plane in bottom portion
of sight window. Mount has LaRue patented QD
lever for fast removal. Mount has additional riser
for accessory NV optic ring. Order code: 9-LT-110
M-16/AR-15 ADJ. CANTILEVER MOUNT
Co-witnesses with irons and maintains cheekweld. Adjustable height at drop, forward of carry
handle. Attaches with nut to carry handle.
Order code: 9-BC-CAM
13
EOTECH® RETICL
LES
MOUNTING SOLUTIONS
MOUNTING SOLUTIONS
EOTECH
HOLOGRAPHIC
RETICLE ADVANTAGES
OTHER BALLISTIC RETICLES
The holographic technology that is
exclusive to L-3® EOTech®, provides an
enormous advantage over the red dot competition.
Where the competitors can only provide a single aiming
dot, L-3® EOTech® reticle designs can be fabricated to incorporate
4
XR308
XR500
FN303
SAGE
.223 cal with
.308 cal with
.50 BMG with 661
Less Lethal
Less Lethal
multiple trajectory point of aim/point of impact, range assist scales,
62 gr M855 FMJ 150 gr M59 FMJ
gr M33 FMJ at
Launcher
37mm
and anti-torque or cant visual indicators. With this advanced holographic
at roughly 2,680 at roughly 2,800
roughly 3,000
(.68 cal)
Launcher
technology, the HWS® demonstrates its unique flexibility to solve a number
fps using
fps using
fps using
a 14.5” barrel
a 24.8” barrel
a 44.5” barrel
of fire control issues for a host of applications and weapon platforms.
L-3® EOTech® introduces a 2 dot reticle in the XPS and new EXPS models. This simple reticle design is calibrated to the specific trajectory of
M-4 FLAT TOP CO WITNESS SETUP
Sight positioned on flat top. Co-witnesses and
maintains cheek-weld. We carry Troy Industries
front and rear flip ups and GG&G rear. Order
codes: 9-TROY-FBSRA4 (rear) 9-TROY-FBSA4F
(front) 9-GGG-MAD (rear)
MP5 MID RANGE PROFILE MOUNT
Mid profile positioned mount for MP5, 33, 53, 91,
93, 94, and G3. Maintains access to ghost rings
and supports NV operation.
Order code: 9-BT-21298
TACTICAL SHOTGUN MOUNTS
Saddle mount, no tapping required. For
Remington 870, 1100, 11-87.
Order code: 9-BSQ-16800
MP5 LOW PROFILE MOUNT
Low profile positioned mount for MP5, 33, 53,
91, 93, 94, and G3. Maintains cheek- weld and
supports NV operation. Order code: 9-BT-21262
M-16/AR-15 CARRY HANDLE MOUNT
Positions rail on top of carry handle. Keeps
access to iron sights and has extended rail for NV
systems. Works well with gas mask peripherals.
Order code: 9-ARMS-#2EXT
DROP-IN QUAD RAIL
Quad rail that fits in standard D Ring of 7” AR
platforms. No modification to rifle required.
Simply replaces handguard. Low cost, high
quality. Order code: 9-EOT-QR7
M-16/AR-15 FIXED CANTILEVER MOUNT
Co-witnesses with irons and maintains cheek- weld.
Cantilever mount attaches to carry handle.
Order code: 9-MWG-SAM3AH
the M4 carbine. Although only two dots are provided, this unique pattern provides (4) usable aiming points.
The 2 dot reticle can also be distinguished easily with or without magnification. In addition, this reticle pattern can work on other weapon
platforms and provide (4) aiming points: close, medium and long range (see chart below).
50 yards
and
200 yards
500 yards
2-Dot Reticle
556.A65/1
553.A65BLK
553.A65TAN
552.A65/1
552.XR308
552.XR500
517.A65/1
516.A65/1
512.A65/1
512.MOSSYOAK
512.Realtree
EOLAD
EXPS3-0
EXPS3-2
EXPS3-4
EXPS2-0
EXPS2-2
XPS3-0
XPS3-2
XPS2 0
XPS2-1
XPS2-2
XPS2-FN
XPS2-SAGE
XPS2-RF
12
7 yards
LARUE TACTICAL 1/4” RISER
Riser for flat top AR’s. Mount raises sight 1/4”, and
places irons in sighting plane in bottom portion
of sight window. Mount has LaRue patented QD
lever for fast removal. Mount has additional riser
for accessory NV optic ring. Order code: 9-LT-110
M-16/AR-15 ADJ. CANTILEVER MOUNT
Co-witnesses with irons and maintains cheekweld. Adjustable height at drop, forward of carry
handle. Attaches with nut to carry handle.
Order code: 9-BC-CAM
13
– DOMINATE the DARKNESS®
Today, this mission is more important than ever, for we live in a dangerous world where any advantage is critical to
WELCOME
personal safety and an operation’s success. As you will see in this catalog, our proud military heritage and technology has
Insight Technology today stands as a world leader in the design,
been incorporated into our entire line of products. We hope that you, the responsible citizen or first responder, will come
development and manufacture of tactical lasers, illuminators and
to depend upon Insight Technology products to help keep you safe today and every day.
thermal imaging equipment. Founded 20 years ago in a family’s
home basement, we have grown to be the recognized leader in this
area and the company the U.S. Armed Forces turn to for vital, lifesaving equipment.
insight
You may never see, let alone use, one of our CNVD-T or ATPIAL units,
but countless service men and women are relying every day on these
and other products we make. We take our role as a military supplier
very, very seriously. We understand that each and every unit we
make could mean the difference between life and death and that’s
why we take issues of quality and performance so seriously. We bring
that exact same approach to the products we make for you. We do
not build to two standards, only one – The Insight Standard.
When it comes to the development of our weapon-mounted and
hand-held lights, our engineers and field staff review after-action
reports, interview special forces operators, attend briefings and
ICON LEGEND
training sessions, as well as oversee a battery of extensive laboratory
and situational testing – all in an effort to fulfill our mission: To
150
Max Lumens This value represents
the highest output provided by a light
at its highest setting.
Auto Off To prevent accidental
Max Run Time This value is the
maximum run time of a light at its
brightest setting with fresh batteries.
Waterproof This value
battery discharge many of our
products feature automatic shut
down, with over-ride, after 20
minutes.
provide the defenders of freedom with the advantages they need to
Max Lumens
get the job done.
120
5m
represents the depth at which a
product’s housing will remain sealed
underwater.
Rechargeable These products
Strobe Products with this feature
are capable of delivering a visually
debilitating strobe effect.
feature rechargeable batteries for reduced
operating costs and longer run times.
Rechargeable
S.O.S. In emergency situations your
light is capable of emitting a
visual distress signal.
Momentary Temporary activation
of these products allows brief lowlight identification without having to
deactivate switches.
Momentary
Insight Technology is an ISO 9001:2000 Certified company headquartered in
Londonderry, New Hampshire.
For more information about Insight Technology and our products please visit us
online at: InsightTechnology.com
14
Laser In addition to situation lighting these
products feature an integrated aiming laser.
Laser
15
– DOMINATE the DARKNESS®
Today, this mission is more important than ever, for we live in a dangerous world where any advantage is critical to
WELCOME
personal safety and an operation’s success. As you will see in this catalog, our proud military heritage and technology has
Insight Technology today stands as a world leader in the design,
been incorporated into our entire line of products. We hope that you, the responsible citizen or first responder, will come
development and manufacture of tactical lasers, illuminators and
to depend upon Insight Technology products to help keep you safe today and every day.
thermal imaging equipment. Founded 20 years ago in a family’s
home basement, we have grown to be the recognized leader in this
area and the company the U.S. Armed Forces turn to for vital, lifesaving equipment.
insight
You may never see, let alone use, one of our CNVD-T or ATPIAL units,
but countless service men and women are relying every day on these
and other products we make. We take our role as a military supplier
very, very seriously. We understand that each and every unit we
make could mean the difference between life and death and that’s
why we take issues of quality and performance so seriously. We bring
that exact same approach to the products we make for you. We do
not build to two standards, only one – The Insight Standard.
When it comes to the development of our weapon-mounted and
hand-held lights, our engineers and field staff review after-action
reports, interview special forces operators, attend briefings and
ICON LEGEND
training sessions, as well as oversee a battery of extensive laboratory
and situational testing – all in an effort to fulfill our mission: To
150
Max Lumens This value represents
the highest output provided by a light
at its highest setting.
Auto Off To prevent accidental
Max Run Time This value is the
maximum run time of a light at its
brightest setting with fresh batteries.
Waterproof This value
battery discharge many of our
products feature automatic shut
down, with over-ride, after 20
minutes.
provide the defenders of freedom with the advantages they need to
Max Lumens
get the job done.
120
5m
represents the depth at which a
product’s housing will remain sealed
underwater.
Rechargeable These products
Strobe Products with this feature
are capable of delivering a visually
debilitating strobe effect.
feature rechargeable batteries for reduced
operating costs and longer run times.
Rechargeable
S.O.S. In emergency situations your
light is capable of emitting a
visual distress signal.
Momentary Temporary activation
of these products allows brief lowlight identification without having to
deactivate switches.
Momentary
Insight Technology is an ISO 9001:2000 Certified company headquartered in
Londonderry, New Hampshire.
For more information about Insight Technology and our products please visit us
online at: InsightTechnology.com
14
Laser In addition to situation lighting these
products feature an integrated aiming laser.
Laser
15
– AIMING AND ILLUMINATION
Three Mounting Options
for the M3X and M6X.
Adjustable Slide-Lock® Mount (Top View)
Insight’s patented Slide-Lock® interface system allows for instant
insight
tool-free mounting and removal on most pistol rails. In the M3X and
M6X series, there are three interface options. The Universal Slide-Lock®
mount fits most pistols, while the 1913 Slide-Lock® mount is designed
specifically for the true M1913 Mil-Spec Picatinny rail. Both Slide-Lock®
versions come with an alternate latch bar to insure the proper fit. The
Rail-Grabber™ mount fits most rail configurations whether for a pistol,
rifle or shotgun and utilizes a screw-adjustable locking plate that can
1913 Slide-Lock® Mount (Top View)
be tightened to insure a rock solid fit. The Rail-Grabber™ mount is
particularly recommended for heavy recoiling firearms.
Regardless of the application, our weapon-mounted lights and lasers
are designed to perform. Functionality is the cornerstone of our
product line. That’s why we offer ambidextrous multi-function switches
that enable fast and ready light/laser activation no matter which hand
you use. Additionally, our optional remotes for use with rifles and
shotguns, both pump-action and semi-auto, deliver versatility across
Rail-Grabber™ Mount (Top View)
all three firearm platforms.
No matter if it’s a pistol, rifle or shotgun, or what the application
scenario, Insight Technology has a weapon-mounted light or laser/
light combo that will give you the ability and the confidence to Dominate the Darkness!
FOR OVER 20 YEARS
Insight has engineered and produced advanced tactical vision enhancement products for the U.S. Armed Forces and Law Enforcement.
Countless men and women serving our country and protecting our communities depend on the precision, reliability and durability of our
products. The weapon mounted systems on the following pages were all created with one objective in mind – to provide the user with an
undeniable advantage in low-light environments. From our new high-output X-Series LED lights to our battle-seasoned M-Series Xenon
assemblies, each weapon light has been rigorously tested to perform without question and to – Dominate the Darkness®!
16
17
– AIMING AND ILLUMINATION
Three Mounting Options
for the M3X and M6X.
Adjustable Slide-Lock® Mount (Top View)
Insight’s patented Slide-Lock® interface system allows for instant
insight
tool-free mounting and removal on most pistol rails. In the M3X and
M6X series, there are three interface options. The Universal Slide-Lock®
mount fits most pistols, while the 1913 Slide-Lock® mount is designed
specifically for the true M1913 Mil-Spec Picatinny rail. Both Slide-Lock®
versions come with an alternate latch bar to insure the proper fit. The
Rail-Grabber™ mount fits most rail configurations whether for a pistol,
rifle or shotgun and utilizes a screw-adjustable locking plate that can
1913 Slide-Lock® Mount (Top View)
be tightened to insure a rock solid fit. The Rail-Grabber™ mount is
particularly recommended for heavy recoiling firearms.
Regardless of the application, our weapon-mounted lights and lasers
are designed to perform. Functionality is the cornerstone of our
product line. That’s why we offer ambidextrous multi-function switches
that enable fast and ready light/laser activation no matter which hand
you use. Additionally, our optional remotes for use with rifles and
shotguns, both pump-action and semi-auto, deliver versatility across
Rail-Grabber™ Mount (Top View)
all three firearm platforms.
No matter if it’s a pistol, rifle or shotgun, or what the application
scenario, Insight Technology has a weapon-mounted light or laser/
light combo that will give you the ability and the confidence to Dominate the Darkness!
FOR OVER 20 YEARS
Insight has engineered and produced advanced tactical vision enhancement products for the U.S. Armed Forces and Law Enforcement.
Countless men and women serving our country and protecting our communities depend on the precision, reliability and durability of our
products. The weapon mounted systems on the following pages were all created with one objective in mind – to provide the user with an
undeniable advantage in low-light environments. From our new high-output X-Series LED lights to our battle-seasoned M-Series Xenon
assemblies, each weapon light has been rigorously tested to perform without question and to – Dominate the Darkness®!
16
17
LED WEAPO
ON-MO
OUNT
TED LIGHTS
WL1-AA LED Tactical Illuminator (Pistol/Long Gun)
P/N: WL1-000-A1 Weapon Light One, AA, Laser, QR, Pistol Kit
WL1-000-A2 Weapon Light One, AA, Laser, QR, Long Gun Kit
WL1-000-A3 Weapon Light One, AA, QR, Pistol Kit
WL1-000-A4 Weapon Light One, AA, QR, Long Gun Kit
Highlights
• First tactical weapon light to offer AA batteries in the world.
• New Quick release Rail-Grabber™ provides fast and solid attachment.
• Powerful 150+ lumens.
• Multi-use flashlight capable of emitting white light and visible laser.
WL1-AA LED Specifications
WMX200 Tactical Illuminator (Long Gun)
P/N: VBL-000-A13 Assembly, Kit, Weapon Mount, Rotation, Black
VBL-000-A15 Assembly, Kit, Weapon Mount, Rotation, Bronze
VBL-000-A7 Assembly, Kit, Weapon Mount, Fixed, Black
VBL-000-A9 Assembly, Kit, Weapon Mount, Fixed, Bronze
VBL-000-A1 Assembly, Kit, Handheld W/Sleeve, Black
VBL-000-A3 Assembly, Kit, Handheld W/Sleeve, Bronze
VBL-000-A19 Assembly, Kit, Handheld, Black
VBL-000-A21 Assembly, Kit, Handheld, Bronze
Rotational
Rail-Grabber™
mount
NEW
Highlights
• Designed for combat, these lights utilize the latest high-output
white LED and infrared (IR) LED technology.
• White LED offers an intense 200 lumens
• Non-visible IR light provides discreet illumination.
• Tail cap offers push button operation or remote jack access port.
• Weapon mount is offered in fixed or rotational Rail-Grabber™ options.
• Waterproof to 66 ft.
insight
Output: 150+ Lumens
Run Time: 90 Minutes
Visible Laser: Class 3R, Red
Interface: Quick Release Rail-Grabber™ fits
MIL-STD-1913 Picatinny & Universal Rails
Weight: 3.4 oz. w/Batteries
(3.5 oz. w/Long Gun Backplate & Batteries)
Dimensions: 3.618”L x 1.435”W x 1.335”H
(1.74”H for WL1 w/Laser)
(3.761”L w/Long Gun Backplate)
Waterproof: Rated to 1 meter for 5 min.
Lithium Battery Power: 3 Volts from Two Energizer®
Lithium AA Batteries Included (Fully Compatible with
Alkaline AA)
LED WEAPON-MOUNTED LIGHTS
WMX200 Specifications
NEW
Features
Multiple Modes: Constant On, Momentary On, Strobe
• Two, AA, 1.5 volt lithium batteries
• Minimum of 150 lumens and 3500 cd peak beam
intensity
• Minimum 90 minute run time (on lithium batteries)
• Strobe @ 10 Hz
• 6500 degree color temperature (neutral white)
• Maximum 2 mrad beam divergence
• Less than 5 mW, 650nm laser
• Selectable modes – Off, Light, Laser, Light & Laser
Waterproof to 1m for 5 minutes
• Operating temperature of -10 to +45 deg. C
• Drop height of 1m
• Weapon shock – M4 @ 6000 rounds
• Boresight retention – 0.5in at 25m after
550 rounds on an M4A1
• Mounts rails without special tools –
Quick Release Throw Lever
• Removable backplate when mounted to long gun
• Long Gun Backplate option available
• Fits within M3 package space (light only)
- Reduced size
- AA batteries allow smaller height and width vs.
legacy lights and competition
• Advanced Polymer Body
- Reduced weight - .5 oz (estimate)
• Made in USA
Light Sources White and IR LED
Output (White Light)
High Output 200 lumens
Low Output 5 lumens
Run Time (High) 120 Minutes
IR Light Output Flood IR LED <45 mW
Waterproof to 66 Feet for 2 hours
Weight 3.9 oz. w/Batteries
Batteries 6 Volts from Two (123)
WMX200 Dimensions
Push-Button/Remote
Jack Tailcap
Hand-held body configuration:
Dimensions 5.2”L x 1.25”W x 1.25”H
Weapon-mount body (integrated-fixed):
Dimensions 5.2”L x 1.50”W x 1.70”H
Weapon-mount body (integrated-rotational):
Dimensions 5.2”L x 1.50”W x 1.70”H
Features Quick Release
Rail-Grabber™
Removable Push-Button Insert
Remote Access Port
WMX200
rotated outward
90
150+
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
Laser
18
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
120
200
20m
Momentary
19
LED WEAPO
ON-MO
OUNT
TED LIGHTS
WL1-AA LED Tactical Illuminator (Pistol/Long Gun)
P/N: WL1-000-A1 Weapon Light One, AA, Laser, QR, Pistol Kit
WL1-000-A2 Weapon Light One, AA, Laser, QR, Long Gun Kit
WL1-000-A3 Weapon Light One, AA, QR, Pistol Kit
WL1-000-A4 Weapon Light One, AA, QR, Long Gun Kit
Highlights
• First tactical weapon light to offer AA batteries in the world.
• New Quick release Rail-Grabber™ provides fast and solid attachment.
• Powerful 150+ lumens.
• Multi-use flashlight capable of emitting white light and visible laser.
WL1-AA LED Specifications
WMX200 Tactical Illuminator (Long Gun)
P/N: VBL-000-A13 Assembly, Kit, Weapon Mount, Rotation, Black
VBL-000-A15 Assembly, Kit, Weapon Mount, Rotation, Bronze
VBL-000-A7 Assembly, Kit, Weapon Mount, Fixed, Black
VBL-000-A9 Assembly, Kit, Weapon Mount, Fixed, Bronze
VBL-000-A1 Assembly, Kit, Handheld W/Sleeve, Black
VBL-000-A3 Assembly, Kit, Handheld W/Sleeve, Bronze
VBL-000-A19 Assembly, Kit, Handheld, Black
VBL-000-A21 Assembly, Kit, Handheld, Bronze
Rotational
Rail-Grabber™
mount
NEW
Highlights
• Designed for combat, these lights utilize the latest high-output
white LED and infrared (IR) LED technology.
• White LED offers an intense 200 lumens
• Non-visible IR light provides discreet illumination.
• Tail cap offers push button operation or remote jack access port.
• Weapon mount is offered in fixed or rotational Rail-Grabber™ options.
• Waterproof to 66 ft.
insight
Output: 150+ Lumens
Run Time: 90 Minutes
Visible Laser: Class 3R, Red
Interface: Quick Release Rail-Grabber™ fits
MIL-STD-1913 Picatinny & Universal Rails
Weight: 3.4 oz. w/Batteries
(3.5 oz. w/Long Gun Backplate & Batteries)
Dimensions: 3.618”L x 1.435”W x 1.335”H
(1.74”H for WL1 w/Laser)
(3.761”L w/Long Gun Backplate)
Waterproof: Rated to 1 meter for 5 min.
Lithium Battery Power: 3 Volts from Two Energizer®
Lithium AA Batteries Included (Fully Compatible with
Alkaline AA)
LED WEAPON-MOUNTED LIGHTS
WMX200 Specifications
NEW
Features
Multiple Modes: Constant On, Momentary On, Strobe
• Two, AA, 1.5 volt lithium batteries
• Minimum of 150 lumens and 3500 cd peak beam
intensity
• Minimum 90 minute run time (on lithium batteries)
• Strobe @ 10 Hz
• 6500 degree color temperature (neutral white)
• Maximum 2 mrad beam divergence
• Less than 5 mW, 650nm laser
• Selectable modes – Off, Light, Laser, Light & Laser
Waterproof to 1m for 5 minutes
• Operating temperature of -10 to +45 deg. C
• Drop height of 1m
• Weapon shock – M4 @ 6000 rounds
• Boresight retention – 0.5in at 25m after
550 rounds on an M4A1
• Mounts rails without special tools –
Quick Release Throw Lever
• Removable backplate when mounted to long gun
• Long Gun Backplate option available
• Fits within M3 package space (light only)
- Reduced size
- AA batteries allow smaller height and width vs.
legacy lights and competition
• Advanced Polymer Body
- Reduced weight - .5 oz (estimate)
• Made in USA
Light Sources White and IR LED
Output (White Light)
High Output 200 lumens
Low Output 5 lumens
Run Time (High) 120 Minutes
IR Light Output Flood IR LED <45 mW
Waterproof to 66 Feet for 2 hours
Weight 3.9 oz. w/Batteries
Batteries 6 Volts from Two (123)
WMX200 Dimensions
Push-Button/Remote
Jack Tailcap
Hand-held body configuration:
Dimensions 5.2”L x 1.25”W x 1.25”H
Weapon-mount body (integrated-fixed):
Dimensions 5.2”L x 1.50”W x 1.70”H
Weapon-mount body (integrated-rotational):
Dimensions 5.2”L x 1.50”W x 1.70”H
Features Quick Release
Rail-Grabber™
Removable Push-Button Insert
Remote Access Port
WMX200
rotated outward
90
150+
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
Laser
18
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
120
200
20m
Momentary
19
LED WEAPON-MO
OUNT
TED LIGHTS
WX150 LED Tactical Illuminator
P/N: WX150
The WX150 is designed to deliver 150 lumens of blinding white light
and give you the tactical advantage in any low-light environment.
Its ambidextrous switch provides you with a choice of Momentary On, Constant On or Strobing
modes. The Type III hard-coat anodized aluminum body fi ts existing M3 holsters and mounts to
most Picatinny-style accessory rails. And the WX150 is rugged enough to withstand some of the
harshest conditions making it the ultimate tool to Dominate the Darkness®!
Features
Multiple Modes: Constant On, Momentary On, Strobe
trobe
o
• Adjustable Rail-Interface Fits Most Standard Rails
ilss
• Fits In Existing M3 Holsters
• Hard-Coat Anodized Aluminum Construction
• True Ambidextrous, Multi-Function Switch
• Limited Lifetime Warranty
M3X LED Tactical Illuminator (Pistol)
M6X LED Tactical Laser Illuminator (Pistol)
P/N: M3X-700-A3 (1913)
M3X-700-A8 (Universal)
M3X-700-A13 (Rail-Grabber™)
M3X-700-A25 (1913 Tan and Black)
P/N: M6X-700-A3 (1913)
M6X-700-A8 (Universal)
M6X-700-A13 (Rail-Grabber™)
The M3X Tactical Illuminator and M6X Tactical Laser Illuminator were designed and built for
combat deployment with U.S. Special Operations personnel. Available in either a pistol or long gun
configuration, and now equipped with a high-performance LED, each has a run time of 120 minutes
and puts out 150+ lumens giving operators greater total darkness domination. The ambidextrous rocker switch
allows the M3X to be activated in either a Momentary On or Constant On mode and is interchangeable with any
other backplate designed for either M3X or M6X models. The M6X has the added feature of a Class III visible red
laser adjustable for windage and elevation and a 4-position selector switch for Laser Only, White Light Only or
White Light and Laser use. The built-in Shock Suppression System has been extensively tested and has survived a
44,000 round torture test.
Peak LED Output 150 Lumens
Run Time 125 Minutes
Interface Options Adjustable Slide-Lock®
Weight 4.0 oz. w/Batteries
Dimensions 3.2”L x 1.6”W x 1.5”H
Waterproof to 1 Meter/3 Feet
Lithium Battery Power 6 Volts from Two (123)
• Three Rail-Interface Options
• Limited Lifetime Warranty
M3X LED Tactical Iluminator Specifications (Pistol)
Peak Output 150+ Lumens
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 3.9 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.6”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
Adjustable
A
djustable
j
Slide-Lock®
Slide
Lock® Rail
R
1m
M6X LED Tactical Laser Iluminator Specifications (Pistol)
Peak Output 150+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 4.4 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 2.1”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
120
DANGER
120
150
150+
+
20m
insight
Multiple Modes: Constant On, Momentary On
• Interchangeable M3X and M6X Backplates
125
Universal
Interface
M3X LED and M6X LED Features:
WX150 Specifications
150
LED WE
EAPO
ON-M
MOUNT
TED LIGHTS
LASER RADIATION
20m
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Get the LED Advantage
M3X LED Tactical Illuminator (Long Gun)
M6X LED Tactical Laser Illuminator (Long Gun)
LED vs. Incandescent (Xenon)
P/N: M3X-700-A1 (1913)
M3X-700-A15 (Rail-Grabber™)
LEDs, or Light Emitting Diodes, have several advantages over incandescent bulbs.
First, LEDs deliver increased lumen output which is why you see not only significant
nt
increases in lumen output, but LEDs can maintain a high lumen output over the
course of the battery’s life. LEDs also provide a longer life than incandescent bulbs.
s.
This is particularly important when the light is mounted on a firearm and subjected
ed
to the extremes of weapon shock. Finally, the LED is far more efficient in how it
consumes battery power. Despite its increased lumen output the LED extends thee
battery run time significantly and in the case of the X2/X2L, M3/M6 and M3X/M6X,
X,
that run time is doubled.
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
P/N: M6X-700-A1 (1913)
M6X-700-A15 (Rail-Grabber™)
PEAK POWER
5mW
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Designed, built and tested for U.S. Special Operations personnel, The M3X Long Gun Tactical Illuminator and
M6X Long Gun Tactical Laser Illuminator are available with an interchangeable backplate. This high-performance,
battle tested backplate utilizes a 3 position toggle switch for Off, Momentary On and Constant On that is used in
conjunction with a straight cord touch-pad remote. For pump-action shotguns, an optional curly-cord remote is
available. The M6X Long Gun has a built-in Shock Suppression System that has been extensively tested and has
survived a 44,000 round torture test. It also has the added feature of a Class III visible red laser adjustable for windage
and elevation and a 4-position selector switch for Laser Only, White Light Only or White Light and Laser use.
Rail-Grabber™
Interface
M3X LED and M6X LED Features:
Multiple Modes: Constant On, Momentary On
• Interchangeable M3X and M6X Backplates
True Ambidextrous Multi-Function Switch
(Rear View of WX150 Shown)
Constant
an
nt
ns (L
(Long G
Gun))
M3X LED Tactical Iluminator Specifications (Long Gun) M6X LED Tactical Laser Iluminator Specifications
Constant
Con
C
Strobe
Strobe
Double Tap for Strobe
in any Direction
Peak Output 150+ Lumens
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 3.9 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.6”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
20
Peak Output 150+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 4.4 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 2.1”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
120
120
150+
Momentary
• Two Rail-Interface Options
• Limited Lifetime Warranty
20m
150+
20m
M
Momentary
21
LED WEAPON-MO
OUNT
TED LIGHTS
WX150 LED Tactical Illuminator
P/N: WX150
The WX150 is designed to deliver 150 lumens of blinding white light
and give you the tactical advantage in any low-light environment.
Its ambidextrous switch provides you with a choice of Momentary On, Constant On or Strobing
modes. The Type III hard-coat anodized aluminum body fi ts existing M3 holsters and mounts to
most Picatinny-style accessory rails. And the WX150 is rugged enough to withstand some of the
harshest conditions making it the ultimate tool to Dominate the Darkness®!
Features
Multiple Modes: Constant On, Momentary On, Strobe
trobe
o
• Adjustable Rail-Interface Fits Most Standard Rails
ilss
• Fits In Existing M3 Holsters
• Hard-Coat Anodized Aluminum Construction
• True Ambidextrous, Multi-Function Switch
• Limited Lifetime Warranty
M3X LED Tactical Illuminator (Pistol)
M6X LED Tactical Laser Illuminator (Pistol)
P/N: M3X-700-A3 (1913)
M3X-700-A8 (Universal)
M3X-700-A13 (Rail-Grabber™)
M3X-700-A25 (1913 Tan and Black)
P/N: M6X-700-A3 (1913)
M6X-700-A8 (Universal)
M6X-700-A13 (Rail-Grabber™)
The M3X Tactical Illuminator and M6X Tactical Laser Illuminator were designed and built for
combat deployment with U.S. Special Operations personnel. Available in either a pistol or long gun
configuration, and now equipped with a high-performance LED, each has a run time of 120 minutes
and puts out 150+ lumens giving operators greater total darkness domination. The ambidextrous rocker switch
allows the M3X to be activated in either a Momentary On or Constant On mode and is interchangeable with any
other backplate designed for either M3X or M6X models. The M6X has the added feature of a Class III visible red
laser adjustable for windage and elevation and a 4-position selector switch for Laser Only, White Light Only or
White Light and Laser use. The built-in Shock Suppression System has been extensively tested and has survived a
44,000 round torture test.
Peak LED Output 150 Lumens
Run Time 125 Minutes
Interface Options Adjustable Slide-Lock®
Weight 4.0 oz. w/Batteries
Dimensions 3.2”L x 1.6”W x 1.5”H
Waterproof to 1 Meter/3 Feet
Lithium Battery Power 6 Volts from Two (123)
• Three Rail-Interface Options
• Limited Lifetime Warranty
M3X LED Tactical Iluminator Specifications (Pistol)
Peak Output 150+ Lumens
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 3.9 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.6”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
Adjustable
A
djustable
j
Slide-Lock®
Slide
Lock® Rail
R
1m
M6X LED Tactical Laser Iluminator Specifications (Pistol)
Peak Output 150+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 4.4 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 2.1”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
120
DANGER
120
150
150+
+
20m
insight
Multiple Modes: Constant On, Momentary On
• Interchangeable M3X and M6X Backplates
125
Universal
Interface
M3X LED and M6X LED Features:
WX150 Specifications
150
LED WE
EAPO
ON-M
MOUNT
TED LIGHTS
LASER RADIATION
20m
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Get the LED Advantage
M3X LED Tactical Illuminator (Long Gun)
M6X LED Tactical Laser Illuminator (Long Gun)
LED vs. Incandescent (Xenon)
P/N: M3X-700-A1 (1913)
M3X-700-A15 (Rail-Grabber™)
LEDs, or Light Emitting Diodes, have several advantages over incandescent bulbs.
First, LEDs deliver increased lumen output which is why you see not only significant
nt
increases in lumen output, but LEDs can maintain a high lumen output over the
course of the battery’s life. LEDs also provide a longer life than incandescent bulbs.
s.
This is particularly important when the light is mounted on a firearm and subjected
ed
to the extremes of weapon shock. Finally, the LED is far more efficient in how it
consumes battery power. Despite its increased lumen output the LED extends thee
battery run time significantly and in the case of the X2/X2L, M3/M6 and M3X/M6X,
X,
that run time is doubled.
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
P/N: M6X-700-A1 (1913)
M6X-700-A15 (Rail-Grabber™)
PEAK POWER
5mW
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Designed, built and tested for U.S. Special Operations personnel, The M3X Long Gun Tactical Illuminator and
M6X Long Gun Tactical Laser Illuminator are available with an interchangeable backplate. This high-performance,
battle tested backplate utilizes a 3 position toggle switch for Off, Momentary On and Constant On that is used in
conjunction with a straight cord touch-pad remote. For pump-action shotguns, an optional curly-cord remote is
available. The M6X Long Gun has a built-in Shock Suppression System that has been extensively tested and has
survived a 44,000 round torture test. It also has the added feature of a Class III visible red laser adjustable for windage
and elevation and a 4-position selector switch for Laser Only, White Light Only or White Light and Laser use.
Rail-Grabber™
Interface
M3X LED and M6X LED Features:
Multiple Modes: Constant On, Momentary On
• Interchangeable M3X and M6X Backplates
True Ambidextrous Multi-Function Switch
(Rear View of WX150 Shown)
Constant
an
nt
ns (L
(Long G
Gun))
M3X LED Tactical Iluminator Specifications (Long Gun) M6X LED Tactical Laser Iluminator Specifications
Constant
Con
C
Strobe
Strobe
Double Tap for Strobe
in any Direction
Peak Output 150+ Lumens
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 3.9 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.6”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
20
Peak Output 150+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 120 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 4.4 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 2.1”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
120
120
150+
Momentary
• Two Rail-Interface Options
• Limited Lifetime Warranty
20m
150+
20m
M
Momentary
21
LED WEAPON-MO
OUNT
TED LIGHTS
M3XTactical Illuminator (Pistol)
M3 LED Tactical Illuminator
M6 LED Tactical Laser Illuminator
P/N: GLL-700-A1 (M3 Universal)
GLL-700-A5 (M3 Universal Tan))
TLI-700-A1 (M6 Universal)
TLI-700-A3 ((M6 Universal Tan))
125
120
+
The M3X Tactical Illuminator was built for U.S. Special Operations personnel
and designed to perform under the most rigorous conditions while surviving the
harshest environments. The M3X utilizes a Xenon bulb that delivers a peak output
of 125+ lumens and is protected by the Shock Suppression System designed to
handle the heavy recoil demands of today’s tactical loads.
The ambidextrous rocker switch allows the M3X to be activated in either a Momentary On or Constant On
mode and is interchangeable with any other backplate designed for either M3X or M6X models.
M3X Pistol Specifications
Peak Output 125+ Lumens
Run Time 60 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
™
Weight 3.9 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.6”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
M6 Specifications
Peak Output 125+ Lumens
Run Time 120 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.7 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.9”H
Visible Laser Class IIIa, Red/Range 200M
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
125
120
+
Tan and Black
1913 Interface
Universal
Interface
insight
Peak Output 125+ Lumens
Run Time 120 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.3 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.5”H
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
Rail-Grabber™
Interface
P/N: M3X-000-A3 (1913)
M3X-000-A8 (Universal)
M3X-000-A13 (Rail-Grabber™)
M3X-000-A25 (1913 Tan and Black)
Now equipped with a powerful LED for greater illumination
llumination
and longer run time, the M3 can be found in more law
w
enforcement holsters than any other rail-mounted light and
has been the gold standard in weapon-mounted illuminators
rs
since it was first introduced in 1998. The M6 expands on the
great features of the M3 by adding a Class III red visible laser.
Each delivers a peak output of 125 lumens and is powered by two
123 lithium batteries for a run time of 120 minutes. Both the M3 and
M6 feature the patented Slide-Lock® interface for easy tool-free mounting
and dismounting to the firearm rail.
M3 Specifications
XENON
N WEAPO
ON-MOUNTED LIG
GHTS
Features:
Multiple Modes: Constant On, Momentary On
• Three Rail-Interface Options
• Interchangeable M3X and M6X Backplates
• Limited Lifetime Warranty
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
125+
60
20m
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
X2 & X2L LED Tactical Illuminators
M6XTactical Laser Illuminator (Pistol)
P/N: MTV-700-A1 (X2)
MTV-701-A1 (X2L)
P/N: M6X-000-A3 (1913)
M6X-000-A8 (Universal)
M6X-000-A13 (Rail-Grabber™)
The X2 and the X2L are the world’s first and best subcompact weapon-mounted
light/laser units now delivering a peak output of 80 lumens from a new LED emitter.
The X2L features a visible red Class IIIa laser with a range of 200 meters. Both models
are powered by one CR2 lithium battery for a run time of 60 minutes. The X2 and X2L
easily mount to most sub-compact pistol rails utilizing Insight’s patented Slide-Lock®
interface. The ambidextrous rocker switch allows the X2 and X2L to be activated in
either a Momentary On or Constant On mode. A two position laser switch on the X2L
turns the laser on and off so it can be used in a White Light Only or
White Light and Laser mode.
Like the M3X, the M6X Tactical Laser Illuminator was built for U.S. Special
Operations personnel and designed to perform under brutal conditions. The M6X
features a Xenon bulb protected by a Shock Suppression System that delivers
a peak output of 125+ lumens, and a red, class IIIa visible laser with a range
of 200 meters that is adjustable for elevation and windage. The M6X features
a 4 position selector switch in conjunction with an ambidextrous rocker switch
so that it can be used as a Laser Only, White Light Only or White Light and
Laser in Momentary or Constant On modes.
M6X Pistol Specifications
X2 Specifications
Peak Output 80+ Lumens
Run Time 60 Minutes
Interface Options Universal Sub-Compact
Weight 1.7 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.6”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
DANGER
Peak Output 125+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 4.4 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 2.1”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
X2 Laser Specifications
Peak Output 80+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options Universal Sub-Compact
Weight 1.9 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.9”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
60
80 +
60
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Features:
Multiple Modes: Constant On, Momentary On
• Three Rail-Interface Options
• Interchangeable M3X and M6X Backplates
• Limited Lifetime Warranty
80 +
Universal
Interface
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
WAVELENGTH
640±40nm
125+
Rail-Grabber™
Interface
60
20m
CLASS IIIa LASER PRODUCT
22
23
LED WEAPON-MO
OUNT
TED LIGHTS
M3XTactical Illuminator (Pistol)
M3 LED Tactical Illuminator
M6 LED Tactical Laser Illuminator
P/N: GLL-700-A1 (M3 Universal)
GLL-700-A5 (M3 Universal Tan))
TLI-700-A1 (M6 Universal)
TLI-700-A3 ((M6 Universal Tan))
125
120
+
The M3X Tactical Illuminator was built for U.S. Special Operations personnel
and designed to perform under the most rigorous conditions while surviving the
harshest environments. The M3X utilizes a Xenon bulb that delivers a peak output
of 125+ lumens and is protected by the Shock Suppression System designed to
handle the heavy recoil demands of today’s tactical loads.
The ambidextrous rocker switch allows the M3X to be activated in either a Momentary On or Constant On
mode and is interchangeable with any other backplate designed for either M3X or M6X models.
M3X Pistol Specifications
Peak Output 125+ Lumens
Run Time 60 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
™
Weight 3.9 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.6”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
M6 Specifications
Peak Output 125+ Lumens
Run Time 120 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.7 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.9”H
Visible Laser Class IIIa, Red/Range 200M
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
125
120
+
Tan and Black
1913 Interface
Universal
Interface
insight
Peak Output 125+ Lumens
Run Time 120 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.3 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.5”H
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
Rail-Grabber™
Interface
P/N: M3X-000-A3 (1913)
M3X-000-A8 (Universal)
M3X-000-A13 (Rail-Grabber™)
M3X-000-A25 (1913 Tan and Black)
Now equipped with a powerful LED for greater illumination
llumination
and longer run time, the M3 can be found in more law
w
enforcement holsters than any other rail-mounted light and
has been the gold standard in weapon-mounted illuminators
rs
since it was first introduced in 1998. The M6 expands on the
great features of the M3 by adding a Class III red visible laser.
Each delivers a peak output of 125 lumens and is powered by two
123 lithium batteries for a run time of 120 minutes. Both the M3 and
M6 feature the patented Slide-Lock® interface for easy tool-free mounting
and dismounting to the firearm rail.
M3 Specifications
XENON
N WEAPO
ON-MOUNTED LIG
GHTS
Features:
Multiple Modes: Constant On, Momentary On
• Three Rail-Interface Options
• Interchangeable M3X and M6X Backplates
• Limited Lifetime Warranty
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
125+
60
20m
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
X2 & X2L LED Tactical Illuminators
M6XTactical Laser Illuminator (Pistol)
P/N: MTV-700-A1 (X2)
MTV-701-A1 (X2L)
P/N: M6X-000-A3 (1913)
M6X-000-A8 (Universal)
M6X-000-A13 (Rail-Grabber™)
The X2 and the X2L are the world’s first and best subcompact weapon-mounted
light/laser units now delivering a peak output of 80 lumens from a new LED emitter.
The X2L features a visible red Class IIIa laser with a range of 200 meters. Both models
are powered by one CR2 lithium battery for a run time of 60 minutes. The X2 and X2L
easily mount to most sub-compact pistol rails utilizing Insight’s patented Slide-Lock®
interface. The ambidextrous rocker switch allows the X2 and X2L to be activated in
either a Momentary On or Constant On mode. A two position laser switch on the X2L
turns the laser on and off so it can be used in a White Light Only or
White Light and Laser mode.
Like the M3X, the M6X Tactical Laser Illuminator was built for U.S. Special
Operations personnel and designed to perform under brutal conditions. The M6X
features a Xenon bulb protected by a Shock Suppression System that delivers
a peak output of 125+ lumens, and a red, class IIIa visible laser with a range
of 200 meters that is adjustable for elevation and windage. The M6X features
a 4 position selector switch in conjunction with an ambidextrous rocker switch
so that it can be used as a Laser Only, White Light Only or White Light and
Laser in Momentary or Constant On modes.
M6X Pistol Specifications
X2 Specifications
Peak Output 80+ Lumens
Run Time 60 Minutes
Interface Options Universal Sub-Compact
Weight 1.7 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.6”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
DANGER
Peak Output 125+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options MIL-STD-1913, Universal, or Rail-Grabber™
Weight 4.4 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 2.1”H
Waterproof to 66 Feet
Lithium Battery Power 6 Volts from Two (123)
X2 Laser Specifications
Peak Output 80+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options Universal Sub-Compact
Weight 1.9 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.9”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
60
80 +
60
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Features:
Multiple Modes: Constant On, Momentary On
• Three Rail-Interface Options
• Interchangeable M3X and M6X Backplates
• Limited Lifetime Warranty
80 +
Universal
Interface
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
WAVELENGTH
640±40nm
125+
Rail-Grabber™
Interface
60
20m
CLASS IIIa LASER PRODUCT
22
23
XENON WEAPON-MOUNTED LIGHTS
M3X
M3
Tactical Illuminator (Long Gun)
P/N: M3X-000-A1 (1913)
M3X-000-A15 (Rail-Grabber™)
M3X-000-A23 (1913 Tan w/Push-Button Backplate)
Rail-Grabber™
Interface
M3 Specifications
Peak Output 90+ Lumens
Run Time 60 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.3 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.5”H
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
Features:
Peak Output 125+ Lumens
Run Time 60 Minutes
Interface Options MIL-STD-1913, Rail-Grabber™
Weight 4.3 oz. w/Batteries
Waterproof to 66 Feet
Dimensions 3.6”L x 1.6”W x 1.6”H
Lithium Battery Power 6 Volts from Two (123)
125+
1913 Interface
Multiple Modes:
Constant On, Momentary On
• Two Rail-Interface Options
• Interchangeable M3X and
M6X Backplates
• Limited Lifetime Warranty
1913 Interface
90 +
60
60
M6
20m
DANGER
P/N: TLI-000-A1
TLI-000-A3 (Tan)
M6X Tactical Laser Illuminator (Long Gun)
P/N: M6X-000-A1 (1913)
M6X-000-A15 (Rail-Grabber™)
125+
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Peak Output 90+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.7 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.9”H
Visible Laser Class IIIa, Red/Range 200M
Waterproof to 66 Feet
Lithium
m Battery Power 6 Volts from Two (123)
Limited
d Lifetime Warranty
The M6X features a 4 position selector switch in conjunction with an ambidextrous
rocker switch for use as a Laser Only, a White Light Only or a White Light and Laser
combo in either a Momentary or Constant On mode.
Peak Output 125+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options MIL-STD-1913, Rail-Grabber™
Weight 4.8 oz. w/Batteries
Waterproof to 66 Feet
Dimensions 3.6”L x 1.6”W x 2.1”H
Lithium Battery Power 6 Volts from Two (123)
PEAK POWER
5mW
M6 Specifications
The M6X Tactical Laser Illuminator for long guns was built to perform in brutal combat
conditions. The Shock Suppression System that surrounds the 125+ lumen Xenon bulb
protects it from punishment even after thousands of rounds. The red, class IIIa
visible laser is adjustable for elevation and windage and designed to hold its zero.
M6X Long Gun Specifications
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
Years of service have earned the M6 a reputation for reliability,
bility, speed
and accuracy. The M6’s blistering white light combined with
th the
tuation.
integrated visible red laser makes it ideal in any low-light situation.
1913
Interface
Universal Slide-Lock®
Interface
insight
M3X Long Gun Specifications
P/N: GLL-001-A1
GLL-001-A5 (Tan)
The M3 set the standard for pistol mounted lights. It’s widely used for home
and personal defense and can be found in more law enforcement holsters
than any other light today. Known for its rugged reliability, the M3 delivers a
peak output of 90+ lumens and features Insight’s patented Universal
Slide-Lock® interface for easy, tool-free mounting. The ambidextrous
backplate rocker switch allows the M3 to be activated in either a
Momentary On or Constant On With optional remote backplates,
the M3 can be used on rifles and shotguns as well.
The long gun version of the M3X Tactical Illuminator
features the same rugged durability of the pistol version.
Its 125+ lumen Xenon bulb is protected by the Shock Suppression
System allowing it to handle the heavy recoil demands
of today’s tactical loads.
The long gun backplate, interchangeable with all other M3X and
M6X backplates, utilizes a 3-position toggle-switch for Off, Momentary On
n
and Constant On. The straight cord touch-pad remote, which is used on rifles and
an
nd
semi-auto shotguns, allows the user to activate the Momentary On feature.
For pump-action shotguns an optional curly cord remote is available.
The A23 Spec Ops model features a push button backplate with
straight cord remote and comes with an authentic military manual.
XENON WEAPON-MOUNTED LIGHTS
Features:
Multiple Modes:
Constant On, Momentary On
• Two Rail-Interface Options
• Interchangeable M3X and
M6X Backplates
• Limited Lifetime Warranty
Rail-Grabber™
Interface
60
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
20m
PEAK POWER
5mW
90 +
60
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
24
25
XENON WEAPON-MOUNTED LIGHTS
M3X
M3
Tactical Illuminator (Long Gun)
P/N: M3X-000-A1 (1913)
M3X-000-A15 (Rail-Grabber™)
M3X-000-A23 (1913 Tan w/Push-Button Backplate)
Rail-Grabber™
Interface
M3 Specifications
Peak Output 90+ Lumens
Run Time 60 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.3 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.5”H
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
Features:
Peak Output 125+ Lumens
Run Time 60 Minutes
Interface Options MIL-STD-1913, Rail-Grabber™
Weight 4.3 oz. w/Batteries
Waterproof to 66 Feet
Dimensions 3.6”L x 1.6”W x 1.6”H
Lithium Battery Power 6 Volts from Two (123)
125+
1913 Interface
Multiple Modes:
Constant On, Momentary On
• Two Rail-Interface Options
• Interchangeable M3X and
M6X Backplates
• Limited Lifetime Warranty
1913 Interface
90 +
60
60
M6
20m
DANGER
P/N: TLI-000-A1
TLI-000-A3 (Tan)
M6X Tactical Laser Illuminator (Long Gun)
P/N: M6X-000-A1 (1913)
M6X-000-A15 (Rail-Grabber™)
125+
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
Peak Output 90+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options Patented Universal Slide-Lock®
Weight 3.7 oz. w/Batteries
Dimensions 3.4”L x 1.6”W x 1.9”H
Visible Laser Class IIIa, Red/Range 200M
Waterproof to 66 Feet
Lithium
m Battery Power 6 Volts from Two (123)
Limited
d Lifetime Warranty
The M6X features a 4 position selector switch in conjunction with an ambidextrous
rocker switch for use as a Laser Only, a White Light Only or a White Light and Laser
combo in either a Momentary or Constant On mode.
Peak Output 125+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 60 Minutes
Interface Options MIL-STD-1913, Rail-Grabber™
Weight 4.8 oz. w/Batteries
Waterproof to 66 Feet
Dimensions 3.6”L x 1.6”W x 2.1”H
Lithium Battery Power 6 Volts from Two (123)
PEAK POWER
5mW
M6 Specifications
The M6X Tactical Laser Illuminator for long guns was built to perform in brutal combat
conditions. The Shock Suppression System that surrounds the 125+ lumen Xenon bulb
protects it from punishment even after thousands of rounds. The red, class IIIa
visible laser is adjustable for elevation and windage and designed to hold its zero.
M6X Long Gun Specifications
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
Years of service have earned the M6 a reputation for reliability,
bility, speed
and accuracy. The M6’s blistering white light combined with
th the
tuation.
integrated visible red laser makes it ideal in any low-light situation.
1913
Interface
Universal Slide-Lock®
Interface
insight
M3X Long Gun Specifications
P/N: GLL-001-A1
GLL-001-A5 (Tan)
The M3 set the standard for pistol mounted lights. It’s widely used for home
and personal defense and can be found in more law enforcement holsters
than any other light today. Known for its rugged reliability, the M3 delivers a
peak output of 90+ lumens and features Insight’s patented Universal
Slide-Lock® interface for easy, tool-free mounting. The ambidextrous
backplate rocker switch allows the M3 to be activated in either a
Momentary On or Constant On With optional remote backplates,
the M3 can be used on rifles and shotguns as well.
The long gun version of the M3X Tactical Illuminator
features the same rugged durability of the pistol version.
Its 125+ lumen Xenon bulb is protected by the Shock Suppression
System allowing it to handle the heavy recoil demands
of today’s tactical loads.
The long gun backplate, interchangeable with all other M3X and
M6X backplates, utilizes a 3-position toggle-switch for Off, Momentary On
n
and Constant On. The straight cord touch-pad remote, which is used on rifles and
an
nd
semi-auto shotguns, allows the user to activate the Momentary On feature.
For pump-action shotguns an optional curly cord remote is available.
The A23 Spec Ops model features a push button backplate with
straight cord remote and comes with an authentic military manual.
XENON WEAPON-MOUNTED LIGHTS
Features:
Multiple Modes:
Constant On, Momentary On
• Two Rail-Interface Options
• Interchangeable M3X and
M6X Backplates
• Limited Lifetime Warranty
Rail-Grabber™
Interface
60
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
20m
PEAK POWER
5mW
90 +
60
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
24
25
XENON WEAPON-MOU
UNTE
ED LIGHT
TS
LED Bezels
X2 & X2L
(Compatible with XENON MX, M, and X Series Weapon-Mounted Lights)Light)
P/N: MTV-000-A1
MTV-100-A1 (X2L)
A Simple Upgrade Path
For concealed carry low light versatility,
nothing beats the X2 or X2L from Insight
Technology at an affordable price. Our expert
engineers produced the world’s first and
nted light and
best sub-compact weapon-mounted
lu
ude
laser/light combo. The X2 features include
a Slide-Lock® interface, focusable beam
and intuitive rocker switch with Constant and
Momentary modes. The X2L shares all of these
features plus a visible red laser with a selector switch
for white light only operation.
X2 Laser Specifications
Peak Output 40+ Lumens
Run Time 30 Minutes
Interface Options Universal Sub-Compact
Weight 1.7 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.6”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
40 +
Upgrading your existing Insight weapon light to a high-power, long lasting
LED is quick and easy requiring no special tools. Simply unscrew your
existing light’s bezel and remove the Xenon bulb. Take the LED from
your replacement LED package and drop it in then screw on the
LED replacement bezel. Make sure not to damage the O-ring seal
on your weapon light. See your owner’s manual for additional
maintenance instructions.
30
Peak Output 40+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 30 Minutes
Interface Options Universal Sub-Compact
Weight 1.9 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.9”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
40 +
M3X/M6X LED Bezel
M3/M6 LED Bezel
X2/X2L LED Bezel
P/N: M3X-750-A1
P/N: GLL-750-A1
The M3/M6 replacement LED bezel gives
you 125 lumens of blinding light and up
to 120 minutes of run time, all without
requiring a change in holster. Supercharge
your M3 or M6 with the easy to install
replacement LED bezel.
Insight’s industry leading compact weapon light
just got better with the new replacement LED
bezel. Within minutes, and without the need for
tools, you can take your X2 or X2L from 40 to 80
lumens and increase dependable run time to 60
minutes.
Turn your M3X or M6X into a 150 lumen powerhouse with
the Insight Technology replacement LED bezel. Not only
will you increase run time to 120 minutes, but the new
bezels also fit existing flip and bikini caps for the M3X and
M6X. Best of all you won’t have to change your existing
weapon light capable holster.
DANGER
30
120
150+
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
125+
20m
WAVELENGTH
640±40nm
120
P/N: MTV-750-A1
80 +
60
CLASS IIIa LASER PRODUCT
X-Series
M2 UTL
M-Series
P/N: HKL-000-A5
Shotgun Remote
The M2 is the light that started the revolution. Blinding power, single-handed operation,
and instant tool-free installation, the M2 UTL set the standard and remains the best
tactical white light for the HK USP pistol.
(for M3 & M6)
P/N: CFL-200
Pistol Remote
The M2 was developed in 1995 for the HK USP’s proprietary rail and derived from the
LAM, which was originally designed for the HK MK23 used by U.S. Special Operations
personnel. The M2 delivers a peak output of 90+ lumens and easily mounts without the
aid of tools to the USP’s rail. The M2 utilizes a rear On/Off switch in conjunction with a
bottom positioned toggle switch. Toggling right provides Momentary On light while
toggling left puts the M2 into the Constant On mode.
Contoured Pistol Remotes
s
Pistol Backplate (available for several models)
P/N: CFL-150
P/N: CFL-400
(for M3 & M6)
P/N: CFL-050-425
Flip Cap Filter
P/N: CFL-210-A2 (Red)
CFL-210-A3 (Opaque)
M2 UTL Specifications
Peak Output 90+ Lumens
Run Time 60 Minutes
Interface Options Designed to Fit the HK USP Series
Weight 4 oz. w/Battery
Dimensions 3.5”L x 1.5”W x 2.1”H
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
Long Gun Backplate
On/Off Switch
Rear View of M2 UTL
90 +
Pattern Generators
(set of 3 for M6 only)
P/N: CFL-033
Remote Port
Bikini Filter
60
Long Gun Remotes
Constant
26
(remote sold separately)
P/N: CFL-170
Momentary
P/N: CFL-310
CFL-053-4
P/N: CFL-180-A2 (Red)
CFL-180-A3 (Opaque)
27
insight
X2 Specifications
WEAPO
ON-MOUN
NTED ACCES
SSOR
RIES
XENON WEAPON-MOU
UNTE
ED LIGHT
TS
LED Bezels
X2 & X2L
(Compatible with XENON MX, M, and X Series Weapon-Mounted Lights)Light)
P/N: MTV-000-A1
MTV-100-A1 (X2L)
A Simple Upgrade Path
For concealed carry low light versatility,
nothing beats the X2 or X2L from Insight
Technology at an affordable price. Our expert
engineers produced the world’s first and
nted light and
best sub-compact weapon-mounted
lu
ude
laser/light combo. The X2 features include
a Slide-Lock® interface, focusable beam
and intuitive rocker switch with Constant and
Momentary modes. The X2L shares all of these
features plus a visible red laser with a selector switch
for white light only operation.
X2 Laser Specifications
Peak Output 40+ Lumens
Run Time 30 Minutes
Interface Options Universal Sub-Compact
Weight 1.7 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.6”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
40 +
Upgrading your existing Insight weapon light to a high-power, long lasting
LED is quick and easy requiring no special tools. Simply unscrew your
existing light’s bezel and remove the Xenon bulb. Take the LED from
your replacement LED package and drop it in then screw on the
LED replacement bezel. Make sure not to damage the O-ring seal
on your weapon light. See your owner’s manual for additional
maintenance instructions.
30
Peak Output 40+ Lumens
Visible Laser Class IIIa, Red/Range 200M
Run Time 30 Minutes
Interface Options Universal Sub-Compact
Weight 1.9 oz. w/Battery
Dimensions 2.4”L x 1.4”W x 1.9”H
Lithium Battery Power 3 Volts from One CR2
Limited Lifetime Warranty
40 +
M3X/M6X LED Bezel
M3/M6 LED Bezel
X2/X2L LED Bezel
P/N: M3X-750-A1
P/N: GLL-750-A1
The M3/M6 replacement LED bezel gives
you 125 lumens of blinding light and up
to 120 minutes of run time, all without
requiring a change in holster. Supercharge
your M3 or M6 with the easy to install
replacement LED bezel.
Insight’s industry leading compact weapon light
just got better with the new replacement LED
bezel. Within minutes, and without the need for
tools, you can take your X2 or X2L from 40 to 80
lumens and increase dependable run time to 60
minutes.
Turn your M3X or M6X into a 150 lumen powerhouse with
the Insight Technology replacement LED bezel. Not only
will you increase run time to 120 minutes, but the new
bezels also fit existing flip and bikini caps for the M3X and
M6X. Best of all you won’t have to change your existing
weapon light capable holster.
DANGER
30
120
150+
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
125+
20m
WAVELENGTH
640±40nm
120
P/N: MTV-750-A1
80 +
60
CLASS IIIa LASER PRODUCT
X-Series
M2 UTL
M-Series
P/N: HKL-000-A5
Shotgun Remote
The M2 is the light that started the revolution. Blinding power, single-handed operation,
and instant tool-free installation, the M2 UTL set the standard and remains the best
tactical white light for the HK USP pistol.
(for M3 & M6)
P/N: CFL-200
Pistol Remote
The M2 was developed in 1995 for the HK USP’s proprietary rail and derived from the
LAM, which was originally designed for the HK MK23 used by U.S. Special Operations
personnel. The M2 delivers a peak output of 90+ lumens and easily mounts without the
aid of tools to the USP’s rail. The M2 utilizes a rear On/Off switch in conjunction with a
bottom positioned toggle switch. Toggling right provides Momentary On light while
toggling left puts the M2 into the Constant On mode.
Contoured Pistol Remotes
s
Pistol Backplate (available for several models)
P/N: CFL-150
P/N: CFL-400
(for M3 & M6)
P/N: CFL-050-425
Flip Cap Filter
P/N: CFL-210-A2 (Red)
CFL-210-A3 (Opaque)
M2 UTL Specifications
Peak Output 90+ Lumens
Run Time 60 Minutes
Interface Options Designed to Fit the HK USP Series
Weight 4 oz. w/Battery
Dimensions 3.5”L x 1.5”W x 2.1”H
Lithium Battery Power 6 Volts from Two (123)
Limited Lifetime Warranty
Long Gun Backplate
On/Off Switch
Rear View of M2 UTL
90 +
Pattern Generators
(set of 3 for M6 only)
P/N: CFL-033
Remote Port
Bikini Filter
60
Long Gun Remotes
Constant
26
(remote sold separately)
P/N: CFL-170
Momentary
P/N: CFL-310
CFL-053-4
P/N: CFL-180-A2 (Red)
CFL-180-A3 (Opaque)
27
insight
X2 Specifications
WEAPO
ON-MOUN
NTED ACCES
SSOR
RIES
FIT CHARTS
Gun
Manufacturer
Benelli
Beretta
LG/P
LG
Gun Model
Shotguns
Comment
CFL-900 and ext. mag
tube
CX4 Storm
P
PX4 Storm
LG
RX4 Storm
P
92/96 models
P
Vertec
P
90-TWO
P
PX4 Sub-Compact
P
M9-A1
P
PRO-9
P
92G SD
Caspian Arms
P
Recon Rail Receiver
Colt
LG
M4
1913/Picatinny Rails
LG
AR-15
1913/Picatinny Rails
CZ
P
75 P-01
FN
LG
P90-Tri-rail
LG
Scar
P
Five-SeveN
P
FNP 9, 40, 45
P
17, 19, 20, 21, 22, 23, 25, 31,
32, 34, 35, 37, 38
Glock
P
Gun
Manufacturer
H&K
M3
M6 X2/X2L
✓
✓
✓
✓
✓
✓
✓
✓
Adapter Required
✓
✓
✓
✓
✓
✓
Gun Model
LG
MP5
P
USP, Compact/Full
P
P2000
P
P2000SK
P
P30
P
HK45
LG
HK416
LG
HK417
LG
UMP
LG
MP7
LG
G36
P
HK45C
Kel-Tec
P
PF-9
Kimber
P
TLE/RL II
P
Warrior
P
SIS Custom/RL
P
Gold Combat RL II
P
PRO TLE/RLII
Mossberg
LG
930 SPX/500/590
Para Ordnance
P
Nite Tac
P
Lite Hawg
Remington
LG
870/1100
M6X
XTI/WX150
A8/A15
A8/A15
✓
A1/A15
A1/A15
A13
A13
A1/A15
A1/A15
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A1/A15
A1/A15
A1/A15
A1/A15
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Comment
M2
(UTL)
Weaver or 1913/Picatinny
A8
A8
A1/A15
A1/A15
A1/A15
A1/A15
A8
A8
A8
A8
A8
A8
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Ruger
SIG SAUER
Smith & Wesson
P220 Combat
P
P220
CFL-220-A-1
P
P226
CFL-226-A-1
P
P228/P229
CFL-228-A1
P
P250
P
GSR/Revolution/1911
P
P220R
P
P226R
P
P229R
P
SP2022
LG
556
P
Mosquito
P
SW99
M5 (Discontinued)
P
TSW models
M5 (Discontinued)
Specifications Subject To Change Without Notice
M&P Compact
A15
A15
✓
✓
✓
A8
A8
✓
✓
✓
✓
✓
✓
✓
✓
A8
A8
A8
A8
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
P
P
✓
✓
SR9
✓
A8
A8
A8
A8
A8
A8
A8
A8
A8/A15
A8/A15
✓
✓
✓
✓
✓
✓
A8
A8
✓
A8/A15
A8/A15
✓
A8
A8
✓
M2
(UTL)
M3
M6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
X2/
X2L
M3X
M6X
XTI/WX150
A8
A8
A8
A8
A8
A8
A8
A8
A3
A3
A8
A8
A8
A8
A8
A8
A8
A8
A3
A3
A3
A3
A3
A3
A3
A3
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
A3
A3
A1/A15
A1/A15
A8
A8
A3
A3
A1/A15
A1/A15
✓
✓
A3
A3
✓
M4 (Discontinued)
✓
Specifications Subject To Change Without Notice
Gun
Manufacturer
Springfield
Armory
✓
CFL-900 and Ext. Mag
Tube
P95
P
327 M&P R8
✓
✓
P
Sigma
XTI/WX150
✓
P90
P
✓
CFL-900 and Ext. Mag
Tube
P
P
M6X
✓
✓
✓
✓
✓
✓
P345
M&P
M3X
Comment
P
M&P 15T
M6 X2/X2L
✓
✓
✓
✓
✓
✓
Gun Model
P
M3
✓
✓
✓
✓
✓
✓
✓
LG/P
LG
Specifications Subject To Change Without Notice
28
Gun
Manufacturer
✓
30 w/Rail
LG/P
M3X
insight
LG
Browning
M2
(UTL)
FIT
T CH
HART
TS
LG/P
P
Gun Model
XD45/Compact/ Service/
Tactical
P
XD Sub-Compact
P
Operator Series
P
TRP Light Rail
LG
Loaded M1A
LG
Socom II
P
Loaded Micro Compact
Steyr
M-A1
STI International
P
P
Tactical Models
Strayer-Voigt, Inc.
P
Infinity w/ factory rails
Taurus
P
24/7
P
PT609
P
PT909
P
PT1911 w/Rails
Comment
M2
(UTL)
M3
M6 X2/X2L
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
P
PT99
P
PPS
Wilson Combat
P
CQB w/ Rail
M6X
XTI/WX150
A8
A8
✓
A3/A13
A3/A13
A3/A13
A3/A13
A1/A15
A1/A15
A1/A15
A1/A15
✓
✓
✓
✓
A8
A8
✓
A8
A8
A8
A8
A8
A8
✓
✓
✓
A8
A8
A8
A8
A8
A8
✓
✓
✓
A8
A8
✓
✓
✓
✓
✓
✓
Off Duty
Walther
M3X
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Specifications Subject To Change Without Notice
Product specifications in this publication are based on extensive laboratory testing. Real world performance values may differ based
on usage variables such as battery condition, prolonged battery storage, temperature, and/or number of discharge cycles in the case
of rechargeable models. Specifications are subject to change without notice.
29
FIT CHARTS
Gun
Manufacturer
Benelli
Beretta
LG/P
LG
Gun Model
Shotguns
Comment
CFL-900 and ext. mag
tube
CX4 Storm
P
PX4 Storm
LG
RX4 Storm
P
92/96 models
P
Vertec
P
90-TWO
P
PX4 Sub-Compact
P
M9-A1
P
PRO-9
P
92G SD
Caspian Arms
P
Recon Rail Receiver
Colt
LG
M4
1913/Picatinny Rails
LG
AR-15
1913/Picatinny Rails
CZ
P
75 P-01
FN
LG
P90-Tri-rail
LG
Scar
P
Five-SeveN
P
FNP 9, 40, 45
P
17, 19, 20, 21, 22, 23, 25, 31,
32, 34, 35, 37, 38
Glock
P
Gun
Manufacturer
H&K
M3
M6 X2/X2L
✓
✓
✓
✓
✓
✓
✓
✓
Adapter Required
✓
✓
✓
✓
✓
✓
Gun Model
LG
MP5
P
USP, Compact/Full
P
P2000
P
P2000SK
P
P30
P
HK45
LG
HK416
LG
HK417
LG
UMP
LG
MP7
LG
G36
P
HK45C
Kel-Tec
P
PF-9
Kimber
P
TLE/RL II
P
Warrior
P
SIS Custom/RL
P
Gold Combat RL II
P
PRO TLE/RLII
Mossberg
LG
930 SPX/500/590
Para Ordnance
P
Nite Tac
P
Lite Hawg
Remington
LG
870/1100
M6X
XTI/WX150
A8/A15
A8/A15
✓
A1/A15
A1/A15
A13
A13
A1/A15
A1/A15
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A8
A1/A15
A1/A15
A1/A15
A1/A15
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Comment
M2
(UTL)
Weaver or 1913/Picatinny
A8
A8
A1/A15
A1/A15
A1/A15
A1/A15
A8
A8
A8
A8
A8
A8
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Ruger
SIG SAUER
Smith & Wesson
P220 Combat
P
P220
CFL-220-A-1
P
P226
CFL-226-A-1
P
P228/P229
CFL-228-A1
P
P250
P
GSR/Revolution/1911
P
P220R
P
P226R
P
P229R
P
SP2022
LG
556
P
Mosquito
P
SW99
M5 (Discontinued)
P
TSW models
M5 (Discontinued)
Specifications Subject To Change Without Notice
M&P Compact
A15
A15
✓
✓
✓
A8
A8
✓
✓
✓
✓
✓
✓
✓
✓
A8
A8
A8
A8
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
A1/A15
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
P
P
✓
✓
SR9
✓
A8
A8
A8
A8
A8
A8
A8
A8
A8/A15
A8/A15
✓
✓
✓
✓
✓
✓
A8
A8
✓
A8/A15
A8/A15
✓
A8
A8
✓
M2
(UTL)
M3
M6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
X2/
X2L
M3X
M6X
XTI/WX150
A8
A8
A8
A8
A8
A8
A8
A8
A3
A3
A8
A8
A8
A8
A8
A8
A8
A8
A3
A3
A3
A3
A3
A3
A3
A3
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
A3
A3
A1/A15
A1/A15
A8
A8
A3
A3
A1/A15
A1/A15
✓
✓
A3
A3
✓
M4 (Discontinued)
✓
Specifications Subject To Change Without Notice
Gun
Manufacturer
Springfield
Armory
✓
CFL-900 and Ext. Mag
Tube
P95
P
327 M&P R8
✓
✓
P
Sigma
XTI/WX150
✓
P90
P
✓
CFL-900 and Ext. Mag
Tube
P
P
M6X
✓
✓
✓
✓
✓
✓
P345
M&P
M3X
Comment
P
M&P 15T
M6 X2/X2L
✓
✓
✓
✓
✓
✓
Gun Model
P
M3
✓
✓
✓
✓
✓
✓
✓
LG/P
LG
Specifications Subject To Change Without Notice
28
Gun
Manufacturer
✓
30 w/Rail
LG/P
M3X
insight
LG
Browning
M2
(UTL)
FIT
T CH
HART
TS
LG/P
P
Gun Model
XD45/Compact/ Service/
Tactical
P
XD Sub-Compact
P
Operator Series
P
TRP Light Rail
LG
Loaded M1A
LG
Socom II
P
Loaded Micro Compact
Steyr
M-A1
STI International
P
P
Tactical Models
Strayer-Voigt, Inc.
P
Infinity w/ factory rails
Taurus
P
24/7
P
PT609
P
PT909
P
PT1911 w/Rails
Comment
M2
(UTL)
M3
M6 X2/X2L
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
P
PT99
P
PPS
Wilson Combat
P
CQB w/ Rail
M6X
XTI/WX150
A8
A8
✓
A3/A13
A3/A13
A3/A13
A3/A13
A1/A15
A1/A15
A1/A15
A1/A15
✓
✓
✓
✓
A8
A8
✓
A8
A8
A8
A8
A8
A8
✓
✓
✓
A8
A8
A8
A8
A8
A8
✓
✓
✓
A8
A8
✓
✓
✓
✓
✓
✓
Off Duty
Walther
M3X
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Specifications Subject To Change Without Notice
Product specifications in this publication are based on extensive laboratory testing. Real world performance values may differ based
on usage variables such as battery condition, prolonged battery storage, temperature, and/or number of discharge cycles in the case
of rechargeable models. Specifications are subject to change without notice.
29
TACTICA
AL HAND-H
HELD
D FLAS
SHLIG
GHT
TS
A FLASHLIGHT
in any tactical situation needs to do one thing well... WORK.
When light means safety, this is not an option. Whether you’re
the first on the scene of an accident or the last one out of the
TACTICA
AL HAND
D -HELD FLASHLIG
GHTS
PRECISION
ALUMINUM
REFLECTOR
RUGGED HARD-COAT
ANODIZED ALUMINUM
CONSTRUCTION
building, when you need light it must deliver every time
The X-Treme Series is the flashlight redefined. Powerful and
compact the X-Treme family of hand-held lights is loaded with
features you’ll soon wonder how you did without. Constructed
from durable hard-coat anodized aluminum, an X-Treme Series
AGGRESSIVE
HIGH-GRIP
KNURLING
insight
without question.
CRENELATED
TACTICAL BEZEL
light and its incredibly bright LED offer a dependable tactical
edge. Advanced circuitry delivers uncompromising functionality
with features such as programmable light intensity levels, a
SIMPLE PROGRAMMABLE
ALL-IN-ONE PUSH
BUTTON TAILCAP
blinding strobe, life-saving S.O.S. beacon and more, all instantly
accessible from an easy-to-use multi-function tailcap switch.
When your job places you in a low-light environment your
Activation Button
flashlight becomes an extension of your senses. It becomes
• Auto Off
• Constant
• Momentary
• Strobe
• Dim
• S.O.S.
a trusted partner. No matter what model you choose in a
hand-held flashlight, Insight Technology provides enhanced
awareness that allows you to Dominate the Darkness®.
HX-SERIES PROGRAMMABLE HAND-HELD
FLASHLIGHTS, AN OVERVIEW...
• Programmable with Over 30 Power Settings and Functions
• Set Light to Start At Any Level From Covert Dim to Extreme Power Beam to Strobe
• Digitally Managed Circuit to Control Output Power
Momentary
• Rugged Aerospace Type III Hard-Coat Anodized Aluminum Construction
• Aggressively Knurled Exterior Resists Slipping Under Wet Conditions
• Crenelated Bezels Provide Options for Tactical Defensive Deployment
HAND-HELD FLASHLIGHT ACCESSORIES
• Precision Focused Aluminum Reflector Creates a Tight Hot-Spot
and Generous Corona
Insight hand-held accessories fit our lineup of 1 cell size
(HX120) and 2 cell size (HX150) flashlights.
• Long Lasting Lithium Batteries and Heavy Duty Adjustable Lanyard Included
• Weapon-Mountable with After-Market Accessories
• Limited Lifetime Warranty
30
Flip Cap Lens (flashlight not included)
P/N: FC1-R13B1-MB01 (Red)
FC1-A13B1-MB01 (Amber)
FC1-B13B1-MB01 (Blue)
FC1-G13B1-MB01 (Green)
FC1-K13B1-MB02 (Black)
FC1-C13B1-MB03 (Clear)
Traffic Safety &
Directional Baton
P/N: 080-HH2TB-0001
(flashlight not included)
31
TACTICA
AL HAND-H
HELD
D FLAS
SHLIG
GHT
TS
A FLASHLIGHT
in any tactical situation needs to do one thing well... WORK.
When light means safety, this is not an option. Whether you’re
the first on the scene of an accident or the last one out of the
TACTICA
AL HAND
D -HELD FLASHLIG
GHTS
PRECISION
ALUMINUM
REFLECTOR
RUGGED HARD-COAT
ANODIZED ALUMINUM
CONSTRUCTION
building, when you need light it must deliver every time
The X-Treme Series is the flashlight redefined. Powerful and
compact the X-Treme family of hand-held lights is loaded with
features you’ll soon wonder how you did without. Constructed
from durable hard-coat anodized aluminum, an X-Treme Series
AGGRESSIVE
HIGH-GRIP
KNURLING
insight
without question.
CRENELATED
TACTICAL BEZEL
light and its incredibly bright LED offer a dependable tactical
edge. Advanced circuitry delivers uncompromising functionality
with features such as programmable light intensity levels, a
SIMPLE PROGRAMMABLE
ALL-IN-ONE PUSH
BUTTON TAILCAP
blinding strobe, life-saving S.O.S. beacon and more, all instantly
accessible from an easy-to-use multi-function tailcap switch.
When your job places you in a low-light environment your
Activation Button
flashlight becomes an extension of your senses. It becomes
• Auto Off
• Constant
• Momentary
• Strobe
• Dim
• S.O.S.
a trusted partner. No matter what model you choose in a
hand-held flashlight, Insight Technology provides enhanced
awareness that allows you to Dominate the Darkness®.
HX-SERIES PROGRAMMABLE HAND-HELD
FLASHLIGHTS, AN OVERVIEW...
• Programmable with Over 30 Power Settings and Functions
• Set Light to Start At Any Level From Covert Dim to Extreme Power Beam to Strobe
• Digitally Managed Circuit to Control Output Power
Momentary
• Rugged Aerospace Type III Hard-Coat Anodized Aluminum Construction
• Aggressively Knurled Exterior Resists Slipping Under Wet Conditions
• Crenelated Bezels Provide Options for Tactical Defensive Deployment
HAND-HELD FLASHLIGHT ACCESSORIES
• Precision Focused Aluminum Reflector Creates a Tight Hot-Spot
and Generous Corona
Insight hand-held accessories fit our lineup of 1 cell size
(HX120) and 2 cell size (HX150) flashlights.
• Long Lasting Lithium Batteries and Heavy Duty Adjustable Lanyard Included
• Weapon-Mountable with After-Market Accessories
• Limited Lifetime Warranty
30
Flip Cap Lens (flashlight not included)
P/N: FC1-R13B1-MB01 (Red)
FC1-A13B1-MB01 (Amber)
FC1-B13B1-MB01 (Blue)
FC1-G13B1-MB01 (Green)
FC1-K13B1-MB02 (Black)
FC1-C13B1-MB03 (Clear)
Traffic Safety &
Directional Baton
P/N: 080-HH2TB-0001
(flashlight not included)
31
TACTIC
CAL HAND -H
HELD
D FL
LASHLIGHTS
TACTICAL HAND -HELD
D FLASHLIGHTS
HX150
Programmable
P/N: HX150
HX150 Specifications
Light Source Cree High Intensity LED
LED Output 150 Lumens
Run Time 2 Hours On High / 300 Hours on Low
Waterproof 5 Meters for 5 Minutes
Weight 6.5 oz. w/Batteries
Dimensions 1.3” Head, 1” Body x 5.9” Long
Lithium Battery Power 6 Volts from Two (123)
Features
P/N: VBL-000-A19 Assembly, Kit, Handheld, Black
VBL-000-A21 Assembly, Kit, Handheld, Bronze
NEW
Optional Accessories:
• Flip Caps
• Traffic Baton
• Belt Pouch
Highlights
• Designed for combat, these lights
utilize the latest high-output white
LED and infrared (IR) LED technology.
• White LED offers an intense 200 lumens
• Non-visible IR light provides discreet
illumination.
• Tail cap offers push button operation
or remote jack access port.
• Weapon mount is offered in fixed or
rotational Rail-Grabber™ options.
• Waterproof to 66 ft.
WMX200 Specifications
Light Sources White and IR LED
Output (White Light)
High Output 200 lumens
Low Output 5 lumens
Run Time (High) 120 Minutes
IR Light Output Flood IR LED <45 mW
Waterproof to 66 Feet for 2 hours
Weight 3.9 oz. w/Batteries
Batteries 6 Volts from Two (123)
WMX200 Dimensions
Hand-held body configuration:
Dimensions 5.2”L x 1.25”W x 1.25”H
150
HX200
120
P/N: HX120
HX120 Specifications
Light Source Cree High Intensity LED
LED Output 120 Lumens
Run Time 90 Minutes On High / 100 Hours on Low
Waterproof 5 Meters for 5 Minutes
Weight 5.0 oz. w/Battery
Dimensions 1.3” Head, 1” Body x 4.5” Long
Lithium Battery Power 3 Volts from One (123)
Features
Multiple Modes: Constant On, Momentary On,
Strobe, Dimming, S.O.S., Auto Off
• Digitally Managed Circuit to Control Output
Power
• Crenelated Bezel
• Hard-Coat Anodized Aluminum Construction
• Adjustable Lanyard and Battery Included
• Limited Lifetime Warranty
Optional Accessories:
5m
Programmable
Programmable
insight
WMX200 Tactical Illuminator
Multiple Modes: Constant On, Momentary On,
Strobe, Dimming, S.O.S., Auto Off
• Digitally Managed Circuit to Control Output
Power
• Crenelated Bezel
• Hard-Coat Anodized Aluminum Construction
• Adjustable Lanyard and Batteries Included
• Limited Lifetime Warranty
HX120
• Flip Caps
• Traffic Baton
• Belt Pouch
P/N: HX200
HX200 Specifications
Light Source Cree High Intensity LED
LED Output 200 Lumens
Run Time 2 hours On High / 300 Hours on Low
Waterproof 5 Meters for 5 Minutes
Weight 8.0 oz. w/Batteries
Dimensions 1.6” Head, 30mm Body x 7.5” Long
Lithium Battery Power 9 Volts from Three (123)
120
90
5m
Features
Multiple Modes: Constant On, Momentary On,
Strobe, Dimming, S.O.S., Auto Off
• Digitally Managed Circuit to Control Output
Power
• Crenelated Bezel
• Hard-Coat Anodized Aluminum Construction
• Adjustable Lanyard and Batteries Included
• Limited Lifetime Warranty
Optional Accessories:
• Belt Pouch
200
200
120
Momentary
120
20m
32
5m
33
TACTIC
CAL HAND -H
HELD
D FL
LASHLIGHTS
TACTICAL HAND -HELD
D FLASHLIGHTS
HX150
Programmable
P/N: HX150
HX150 Specifications
Light Source Cree High Intensity LED
LED Output 150 Lumens
Run Time 2 Hours On High / 300 Hours on Low
Waterproof 5 Meters for 5 Minutes
Weight 6.5 oz. w/Batteries
Dimensions 1.3” Head, 1” Body x 5.9” Long
Lithium Battery Power 6 Volts from Two (123)
Features
P/N: VBL-000-A19 Assembly, Kit, Handheld, Black
VBL-000-A21 Assembly, Kit, Handheld, Bronze
NEW
Optional Accessories:
• Flip Caps
• Traffic Baton
• Belt Pouch
Highlights
• Designed for combat, these lights
utilize the latest high-output white
LED and infrared (IR) LED technology.
• White LED offers an intense 200 lumens
• Non-visible IR light provides discreet
illumination.
• Tail cap offers push button operation
or remote jack access port.
• Weapon mount is offered in fixed or
rotational Rail-Grabber™ options.
• Waterproof to 66 ft.
WMX200 Specifications
Light Sources White and IR LED
Output (White Light)
High Output 200 lumens
Low Output 5 lumens
Run Time (High) 120 Minutes
IR Light Output Flood IR LED <45 mW
Waterproof to 66 Feet for 2 hours
Weight 3.9 oz. w/Batteries
Batteries 6 Volts from Two (123)
WMX200 Dimensions
Hand-held body configuration:
Dimensions 5.2”L x 1.25”W x 1.25”H
150
HX200
120
P/N: HX120
HX120 Specifications
Light Source Cree High Intensity LED
LED Output 120 Lumens
Run Time 90 Minutes On High / 100 Hours on Low
Waterproof 5 Meters for 5 Minutes
Weight 5.0 oz. w/Battery
Dimensions 1.3” Head, 1” Body x 4.5” Long
Lithium Battery Power 3 Volts from One (123)
Features
Multiple Modes: Constant On, Momentary On,
Strobe, Dimming, S.O.S., Auto Off
• Digitally Managed Circuit to Control Output
Power
• Crenelated Bezel
• Hard-Coat Anodized Aluminum Construction
• Adjustable Lanyard and Battery Included
• Limited Lifetime Warranty
Optional Accessories:
5m
Programmable
Programmable
insight
WMX200 Tactical Illuminator
Multiple Modes: Constant On, Momentary On,
Strobe, Dimming, S.O.S., Auto Off
• Digitally Managed Circuit to Control Output
Power
• Crenelated Bezel
• Hard-Coat Anodized Aluminum Construction
• Adjustable Lanyard and Batteries Included
• Limited Lifetime Warranty
HX120
• Flip Caps
• Traffic Baton
• Belt Pouch
P/N: HX200
HX200 Specifications
Light Source Cree High Intensity LED
LED Output 200 Lumens
Run Time 2 hours On High / 300 Hours on Low
Waterproof 5 Meters for 5 Minutes
Weight 8.0 oz. w/Batteries
Dimensions 1.6” Head, 30mm Body x 7.5” Long
Lithium Battery Power 9 Volts from Three (123)
120
90
5m
Features
Multiple Modes: Constant On, Momentary On,
Strobe, Dimming, S.O.S., Auto Off
• Digitally Managed Circuit to Control Output
Power
• Crenelated Bezel
• Hard-Coat Anodized Aluminum Construction
• Adjustable Lanyard and Batteries Included
• Limited Lifetime Warranty
Optional Accessories:
• Belt Pouch
200
200
120
Momentary
120
20m
32
5m
33
MINI RE
ED -D
DOT SIIGHT
TS
MRDS
The Mini Red-dot Sight (MRDS) was
designed to aid rapid target acquisition
at close combat distances. Its small
footprint, low power consumption,
and adjustability make it a force
multiplier in tight quarters.
Auto dot intensity and a manual dot
intensity adjustment with 4 brightness levels
provide high visibility in all lighting
conditions for a lightning fast sight picture.
The MRDS features vastly improved ease of operation
over its competitors with capabilities such as a top
loading battery compartment that allows change-out
without the need for sight removal or loss of zero.
It is also waterproof to 66 feet as well as tested to the
environmental extremes of the 810G MIL-SPEC.
The positive click adjusters provide 1 MOA per click windage
and elevation correction ensuring quick and accurate sight
alignment without the guess work.
The Mini Red-dot Sight supports a variety of mounting options giving
the shooter the ability to use it as either a primary sight or as part of a
complete targeting system in conjunction with long distance optics.
The MRDS is built for tactical superiority, Built for Battle™.
Miniature Red-dot Sight FEATURES
•
•
•
•
•
•
•
•
•
Projected 3.5 MOA or 7.0 MOA* Red Aiming Dot
1 MOA Per Click Windage and Elevation Adjustment
Auto Adjust Dot Intensity
Manual Dot Intensity with 4 Brightness Levels
Waterproof to 66 Feet
Meets MIL-SPEC 810G
Top Load Battery with 1 Year Max Run Time
Fits Existing DOCTER® Sight Mounts
Limited Lifetime Warranty
insight
BUILT TO RUGGED
MILITARY SPECS
MINI RE
ED -D
DOT SIGHTS
S
SPECIFICATIONS
Weight . . . . . . . . . . . . . . . . . . . . . 0.85 ounces (Including Battery)
Dimensions
Length . . . . . . . . . . . . . . . . . 1.9”
Width . . . . . . . . . . . . . . . . . . 1.1”
Height . . . . . . . . . . . . . . . . . 1.2”
PERFORMANCE
Aiming Dot Size . . . . . . . . . . . . 3.5 MOA or 7.0 MOA
Range of Travel . . . . . . . . . . . . . +/-1 degree
Battery Life
Photodiode Mode . . . . . . Up to 1 year
(Varies w/lighting conditions)
High 1 (1.6mA) . . . . . . . . . 36 hrs
High 2 (.433mA) . . . . . . . . 250 hrs
Low 1 (.04 mA). . . . . . . . . . 3250+ hrs
Waterproof. . . . . . . . . . . . . . . . . 66 Feet in Fresh Water For 2 Hours
* Note: Dot size needs to be selected at the time of ordering
P/N: MRD-000-A2 (Tan 3.5 MOA Dot)
MRD-000-A4 (Tan 7.0 MOA Dot)
MRD-000-A1 (Black 3.5 MOA Dot)
MRD-000-A3 (Black 7.0 MOA Dot)
(Additional mounting and kit options are available. Contact your
Insight Technology Sales Representative for more information.)
This commodity is subject to the Export Administration
Regulations (15 CFR 730-744). ECCN Number 0A987, U.S.
Department of Commerce authorization may be required
to transfer this commodity to foreign persons.
365
days
20m
(Additional mounting and kit options are available.
Contact your Insight Technology Sales Representative
for more information.)
34
35
MINI RE
ED -D
DOT SIIGHT
TS
MRDS
The Mini Red-dot Sight (MRDS) was
designed to aid rapid target acquisition
at close combat distances. Its small
footprint, low power consumption,
and adjustability make it a force
multiplier in tight quarters.
Auto dot intensity and a manual dot
intensity adjustment with 4 brightness levels
provide high visibility in all lighting
conditions for a lightning fast sight picture.
The MRDS features vastly improved ease of operation
over its competitors with capabilities such as a top
loading battery compartment that allows change-out
without the need for sight removal or loss of zero.
It is also waterproof to 66 feet as well as tested to the
environmental extremes of the 810G MIL-SPEC.
The positive click adjusters provide 1 MOA per click windage
and elevation correction ensuring quick and accurate sight
alignment without the guess work.
The Mini Red-dot Sight supports a variety of mounting options giving
the shooter the ability to use it as either a primary sight or as part of a
complete targeting system in conjunction with long distance optics.
The MRDS is built for tactical superiority, Built for Battle™.
Miniature Red-dot Sight FEATURES
•
•
•
•
•
•
•
•
•
Projected 3.5 MOA or 7.0 MOA* Red Aiming Dot
1 MOA Per Click Windage and Elevation Adjustment
Auto Adjust Dot Intensity
Manual Dot Intensity with 4 Brightness Levels
Waterproof to 66 Feet
Meets MIL-SPEC 810G
Top Load Battery with 1 Year Max Run Time
Fits Existing DOCTER® Sight Mounts
Limited Lifetime Warranty
insight
BUILT TO RUGGED
MILITARY SPECS
MINI RE
ED -D
DOT SIGHTS
S
SPECIFICATIONS
Weight . . . . . . . . . . . . . . . . . . . . . 0.85 ounces (Including Battery)
Dimensions
Length . . . . . . . . . . . . . . . . . 1.9”
Width . . . . . . . . . . . . . . . . . . 1.1”
Height . . . . . . . . . . . . . . . . . 1.2”
PERFORMANCE
Aiming Dot Size . . . . . . . . . . . . 3.5 MOA or 7.0 MOA
Range of Travel . . . . . . . . . . . . . +/-1 degree
Battery Life
Photodiode Mode . . . . . . Up to 1 year
(Varies w/lighting conditions)
High 1 (1.6mA) . . . . . . . . . 36 hrs
High 2 (.433mA) . . . . . . . . 250 hrs
Low 1 (.04 mA). . . . . . . . . . 3250+ hrs
Waterproof. . . . . . . . . . . . . . . . . 66 Feet in Fresh Water For 2 Hours
* Note: Dot size needs to be selected at the time of ordering
P/N: MRD-000-A2 (Tan 3.5 MOA Dot)
MRD-000-A4 (Tan 7.0 MOA Dot)
MRD-000-A1 (Black 3.5 MOA Dot)
MRD-000-A3 (Black 7.0 MOA Dot)
(Additional mounting and kit options are available. Contact your
Insight Technology Sales Representative for more information.)
This commodity is subject to the Export Administration
Regulations (15 CFR 730-744). ECCN Number 0A987, U.S.
Department of Commerce authorization may be required
to transfer this commodity to foreign persons.
365
days
20m
(Additional mounting and kit options are available.
Contact your Insight Technology Sales Representative
for more information.)
34
35
AIMIN
NG AND ILLU
UMIN
NATIO
ON
AIM
MING
G AND IL
LLUMIN
NATION
ITPIAL Infrared Target Pointer/Illuminator/
ATPIAL
P/N: ITP-500C-A2
P/N: ATP-000-A18 (Tan)
ATP-000-A22 (Black)
Aiming Light (AN/PEQ-2A)*
Insight’s Infrared Target Pointer Illuminator/Aiming Light, or AN/PEQ-2A is a weapon-mounted
infrared aiming laser and illuminator hardened for use on all small arms and crew served weapons.
The U.S. Armed Forces standard for night direct fire aiming and illumination
Specifications:
Dimensions: 6.7”L x 3.1”W x 1.4”H
Weight: <9.5oz w/Batteries
Battery Type: (2) AA Alkaline
Run Time: >1 Hour in Dual Hi/Hi mode
IR Aiming Laser
Output Power Low: 0.6 mW (Class I)
Output Power High: 25 mW (Class IIIb)
Beam Divergence: 0.5 mrad
Wavelength: 830 nm (Nominal)
IR Illuminator
Output Power Low: 3.5 mW (Class IIIa)
Output Power High: 30 mW (Class IIIb)
Beam Divergence: 1-105 mrad (min)
Wavelength: 830 nm (Nominal)
Advanced Target Pointer/Illuminator/Aiming Laser (AN/PEQ-15)*
Insight’s Standard Power Advanced Target Pointer Illuminator Aiming
Laser (ATPIAL) is a small, lightweight, easy-to-use aiming system with
integrated infrared and visible aim lasers as well as an infrared illuminator.
• Co-aligned visible and infrared lasers
• Hardened for use on small arms and crew served weapons
Specifications:
Dimensions: 4.6”l x 2.8”w x 1.6”h
Weight: 7.5 oz. w/Battery
Battery Type: (1) 3v DL123 battery
Battery Life: >6 Hours in Dual High
Visible Aim Laser
insight
Output: 4.0 mW (Class IIIa)
Beam Divergence: 0.5 mrad
Wavelength: 605-665 nm
Range: >25m
IR Aim Laser
Output Power Low: 0.6 mW (Class I)
Output Power High: 25 mW (Class IIIb)
Beam Divergence: 0.5 mrad
Wavelength: 820-850 nm
Range: >600m (Low), 2000m (High)
IR Illuminator
Output Power Low: 3.5 mW (Class IIIa)
Output Power High: 30 mW (Class IIIb)
Beam Divergence: 1-105 mrad (min)
Wavelength: 820-850 nm
Range: >2000m
DANGER
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
OUTPUT POWER
6-25mW
WAVELENGTH
830nm
CLASS IIIb LASER PRODUCT
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
LASER POWER WAVELENGTH CLASS
IR
50mW
830nm
IIIb
VIS
<5mW
650nm
IIIa
AN/PEQ-16B
AN/PEQ-4 (MPLI- Medium Powered
ed Laser Illuminator)*
I
Specifications
Insight’s Medium Power Laser Illuminator (MPLI) is a handheld
dheld or weapon-mounted
we
eapon-mounted infrared light.
It is used with night vision devices for very long range, covert
overt targe
target
et acquisition and illumination.
The versatility of the MPLI is enhanced by an operator adjustable
justable beam
b
width and user-selected
pulse and power settings.
Dimensions: 4.1” L x 3.2” W x 1.7” H
Weight (with batteries): 9.9 oz.
Battery Type: (2) 3-volt lithium
Battery Life: Vis Dual run time: ~1.25
hours @ full output power
Specifications:
Dimensions: 9.25” L x 2.25” W x 3” H
Weight (with batteries): 18 oz.
Battery Type: (6) AA alkaline or (3) 3-volt lithium
Visible Aim Laser
Output Power: 4.0 mW
Safety Class: 3A
Beam Divergence: .5 mrad
Wavelength: 605-665 nm
Range: 25m
IR Illuminator
Output Power: 100–800 mW
Safety Class: 4
Beam Divergence: .54 mrad (min)
Wavelength: 830 nm (nominal)
NSN: 5855-01-532-3484
White Light Illuminator
DANGER
LED Lumen Output: 125 typical
DANGER
LASER RADIATION
AVOID D
AVOI
DIRECT EXPOSURE TO BEAM
n
nction
laser device
Insight’s LED Mini Integrated Pointing Illumination Module (MIPIM) is a multifunction
incorporating visible and infrared aim lasers as well as an infrared and LED whitee light illuminator.
P/N: MPLI
• Provides a highly collimated beam of infrared energy and an adjustable target illuminator
(MIPIM-Mini Integrated Pointing Illumination Module) (LED)*
P/N: MPM-000-A11
LASER
R P
POWER WAVELENGTH CLASS
IR
50mW
830nm
IIIb
5
<5mW
650nm
IIIa
VIS
<
IR Aim Laser
Output Power Low: .6 mW
Safety Class: 1
Output Power High: 25 mW
Safety Class: 3B
Beam Divergence: .5 mrad
Wavelength: 820-860 nm
Range: >600m (LO), >2000m (HI)
IR Illuminator
Output Power Low: <3.5 mW
Safety Class: 3A
Output Power High: 30 mW
Safety Class: 3B
Beam Divergence: 1-105 mrad (min)
Wavelength: 820-860 nm
Range: >600m (LO), >2000m (HI)
INVISIBLE LASER RADIATION
RA
ADIATION
AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED
RADIATION
*This product is controlled by export. Please see back cover for more information.
Approved for public release DoD Ref: 08-S-1073.
36
CLASS 4 LASER
*This product is controlled by export. Please see back cover for more information.
Approved for public release OS RRef:08-S-1073.
37
AIMIN
NG AND ILLU
UMIN
NATIO
ON
AIM
MING
G AND IL
LLUMIN
NATION
ITPIAL Infrared Target Pointer/Illuminator/
ATPIAL
P/N: ITP-500C-A2
P/N: ATP-000-A18 (Tan)
ATP-000-A22 (Black)
Aiming Light (AN/PEQ-2A)*
Insight’s Infrared Target Pointer Illuminator/Aiming Light, or AN/PEQ-2A is a weapon-mounted
infrared aiming laser and illuminator hardened for use on all small arms and crew served weapons.
The U.S. Armed Forces standard for night direct fire aiming and illumination
Specifications:
Dimensions: 6.7”L x 3.1”W x 1.4”H
Weight: <9.5oz w/Batteries
Battery Type: (2) AA Alkaline
Run Time: >1 Hour in Dual Hi/Hi mode
IR Aiming Laser
Output Power Low: 0.6 mW (Class I)
Output Power High: 25 mW (Class IIIb)
Beam Divergence: 0.5 mrad
Wavelength: 830 nm (Nominal)
IR Illuminator
Output Power Low: 3.5 mW (Class IIIa)
Output Power High: 30 mW (Class IIIb)
Beam Divergence: 1-105 mrad (min)
Wavelength: 830 nm (Nominal)
Advanced Target Pointer/Illuminator/Aiming Laser (AN/PEQ-15)*
Insight’s Standard Power Advanced Target Pointer Illuminator Aiming
Laser (ATPIAL) is a small, lightweight, easy-to-use aiming system with
integrated infrared and visible aim lasers as well as an infrared illuminator.
• Co-aligned visible and infrared lasers
• Hardened for use on small arms and crew served weapons
Specifications:
Dimensions: 4.6”l x 2.8”w x 1.6”h
Weight: 7.5 oz. w/Battery
Battery Type: (1) 3v DL123 battery
Battery Life: >6 Hours in Dual High
Visible Aim Laser
insight
Output: 4.0 mW (Class IIIa)
Beam Divergence: 0.5 mrad
Wavelength: 605-665 nm
Range: >25m
IR Aim Laser
Output Power Low: 0.6 mW (Class I)
Output Power High: 25 mW (Class IIIb)
Beam Divergence: 0.5 mrad
Wavelength: 820-850 nm
Range: >600m (Low), 2000m (High)
IR Illuminator
Output Power Low: 3.5 mW (Class IIIa)
Output Power High: 30 mW (Class IIIb)
Beam Divergence: 1-105 mrad (min)
Wavelength: 820-850 nm
Range: >2000m
DANGER
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
OUTPUT POWER
6-25mW
WAVELENGTH
830nm
CLASS IIIb LASER PRODUCT
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
LASER POWER WAVELENGTH CLASS
IR
50mW
830nm
IIIb
VIS
<5mW
650nm
IIIa
AN/PEQ-16B
AN/PEQ-4 (MPLI- Medium Powered
ed Laser Illuminator)*
I
Specifications
Insight’s Medium Power Laser Illuminator (MPLI) is a handheld
dheld or weapon-mounted
we
eapon-mounted infrared light.
It is used with night vision devices for very long range, covert
overt targe
target
et acquisition and illumination.
The versatility of the MPLI is enhanced by an operator adjustable
justable beam
b
width and user-selected
pulse and power settings.
Dimensions: 4.1” L x 3.2” W x 1.7” H
Weight (with batteries): 9.9 oz.
Battery Type: (2) 3-volt lithium
Battery Life: Vis Dual run time: ~1.25
hours @ full output power
Specifications:
Dimensions: 9.25” L x 2.25” W x 3” H
Weight (with batteries): 18 oz.
Battery Type: (6) AA alkaline or (3) 3-volt lithium
Visible Aim Laser
Output Power: 4.0 mW
Safety Class: 3A
Beam Divergence: .5 mrad
Wavelength: 605-665 nm
Range: 25m
IR Illuminator
Output Power: 100–800 mW
Safety Class: 4
Beam Divergence: .54 mrad (min)
Wavelength: 830 nm (nominal)
NSN: 5855-01-532-3484
White Light Illuminator
DANGER
LED Lumen Output: 125 typical
DANGER
LASER RADIATION
AVOID D
AVOI
DIRECT EXPOSURE TO BEAM
n
nction
laser device
Insight’s LED Mini Integrated Pointing Illumination Module (MIPIM) is a multifunction
incorporating visible and infrared aim lasers as well as an infrared and LED whitee light illuminator.
P/N: MPLI
• Provides a highly collimated beam of infrared energy and an adjustable target illuminator
(MIPIM-Mini Integrated Pointing Illumination Module) (LED)*
P/N: MPM-000-A11
LASER
R P
POWER WAVELENGTH CLASS
IR
50mW
830nm
IIIb
5
<5mW
650nm
IIIa
VIS
<
IR Aim Laser
Output Power Low: .6 mW
Safety Class: 1
Output Power High: 25 mW
Safety Class: 3B
Beam Divergence: .5 mrad
Wavelength: 820-860 nm
Range: >600m (LO), >2000m (HI)
IR Illuminator
Output Power Low: <3.5 mW
Safety Class: 3A
Output Power High: 30 mW
Safety Class: 3B
Beam Divergence: 1-105 mrad (min)
Wavelength: 820-860 nm
Range: >600m (LO), >2000m (HI)
INVISIBLE LASER RADIATION
RA
ADIATION
AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED
RADIATION
*This product is controlled by export. Please see back cover for more information.
Approved for public release DoD Ref: 08-S-1073.
36
CLASS 4 LASER
*This product is controlled by export. Please see back cover for more information.
Approved for public release OS RRef:08-S-1073.
37
AIMIN
NG AND ILLU
UMIN
NATIO
ON
IM
MAGIN
NG PR
RODUCTS
AN/PEQ-14 (ILWLP- Integrated Laser
MTM
White Light Pointer)*
Insight’s Integrated Laser White Light Pointer (ILWLP) is a weapon-mounted
aiming device incorporating an infrared and visible aim laser as well as variable
P/N: DLM-1100-A2 (*ILWP/Lam 1000-IR Slide-Lock)
DLM-1150-A2 (ILWP/Lam 1000-VIS Slide-Lock)
DLM-1200-A2 (*ILWP/Lam 1000-IR Rail-Grabber)
DLM-1250-A2 (ILWP/Lam 1000-VIS Rail-Grabber)
DLM-1300-A2 (*ILWP/Lam 1000-IR Rail-Grabber (USP))
DLM-13500-A2 (ILWP/Lam 1000-VIS Rail-Grabber (USP))
DLM-1400-A2 (*ILWP/Lam 1000-IR MK23)
DLM-1450-A2 (ILWP/Lam 1000-VIS MK23)
Features
IR Illuminator
Output Power: 25 mW
Safety Class: 3B
Beam Divergence: 50 mrad (nominal)
Wavelength: 820-850 nm
Specifications
• Functions In Sunlight
or Total Darkness
• Penetrates Most
Weather Conditions
• Sensitivity to .07°
Temperature Differences
• White Hot or Black Hot
• Low Battery Indicator
• Target Detection up to 600 meters
• Target Detection up to 1,500m
with Optional 3X Extender
• Weighs 11.8oz w/Batteries
• Powerful, Compact and Portable
• Integrated IR Laserr
• Helmet Mountable
e
• -34°C to +50°C
Operational Temp
• Waterproof to 66ft,
t,
Drop Tested to 6ft
• 4 Hour Run Time
Objective Lens
Battery
Compartment
Laser
Designator
Power/Menu
Button
insight
Weighing in at only 11.8 oz, including batteries, the MTM easily
fits in uniform pockets for quick deployment in the detection,
recognition and identification of potential suspects and victims.
• Enables an operator to engage
targets on the battlefield or in
close quarter combat in limited
visibility or total darkness
Top View
(actual size)
The MTM is a durable, lightweight hand-held thermal imager that
at
gives Law Enforcement agencies and first responders the ability to
y.
Dominate the Darkness® through its state-of-the-art technology.
et
The high-resolution imager allows detection of a man-sized target
out to 600 meters, recognition at 150 meters and identification at
70 meters. The optional 3x extender enhances detection out to
1,500 meters.
Dimensions: 4.1” L x 1.9” W x 2.1” H
Weight (with batteries): 6.0 oz.
Battery Type: (2) 3-volt lithium
Battery Life: >30 minutes continuous
white light operation
Output Power: 4.0 mW
Safety Class: 3A
Beam Divergence: .5 mrad
Wavelength: 640-670 nm
P/N: MTM-000-A4 (MTM-Visible Laser)
MTM-000-A6 (MTM-IR Laser)
Originally designed for the U.S. Armed Forces for use in military
operations, the MTM gives the user the ability to see in low light
and no light situations including smoke, fog and snow.
Specifications
Visible Aim Laser
Mini Thermal Monocular (AN/PAS-23)*
S-23)*
Up/Down
Buttons
Video Jack
Eyepiece
Focus Ring
DANGER
VISIBLE LASER RADIATION
NSN: 5855-01-538-0191
IR Aim Laser
AVOID DIRECT EYE EXPOSURE
White Light Illuminator
PEAK POWER
4.3mW
Output Power: >80 lumens
Output Power: .6 mW
Safety Class: 1
Beam Divergence: .5 mrad
Wavelength: 820-850 nm
WAVELENGTH
640-655nm
CLASS IIIa LASER PRODUCT
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
LASER POWER WAVELENGTH CLASS
IR
50mW
830nm
IIIb
VIS
<5mW
650nm
IIIa
Approved for public release DoD Ref: 08-S-1073.
WTM
Weapon-Mounted
nted Mini Thermal Monocular*
P/N: WTM-000-A14 (WTM-Visible
ble Laser)
WTM-000-A16 (WTM-IR Laser)
LBS
Laser Borelight System (AN/PEM-1)*
The Weapon-Mountable Mini
ni Thermal Monocular
features a Picatinny rail interface
erface and is hardened to
ecoil of 5.56mm tactical
withstand the sustained recoil
loads while still delivering
g unparalleled thermal
imaging capability.
P/N: LBS-300C (Laser Borelight System)
LBS-070 (5.56mm Mandrel)
LBS-071 (7.62mm Mandrel)
LBS-075 (9mm Mandrel)
LBS-172 (.338 Cal. Mandrel)
LBS-079 (.50 Cal. Mandrel)
LBS-135-A1 (40mm Mandrel)
Other calibers are available.
Contact your L-3 Insight Sales Representative for more information.
•
•
•
•
•
Insight’s Laser Borelight System provides a fast and exceptionally precise method for zeroing any aiming laser, day optic, iron sight,
and thermal imaging sight to the host weapon without ever having to fire a round. The LBS can be used with any weapon-sight
combination using naked eyes, direct view optics or a night vision device.
DANGER
• Mandrels available for 5.56mm†, 7.62mm†, 9mm, .338 cal., .50 cal†, 40mm, etc.
Specifications:
Dimensions: 3.8” L x 1.25” W x 2.3” H
Weight: 4.1 oz. w/Battery
Battery Type: (1) AA alkaline
Battery Life: 8 hours
Visible Laser
Output Power: 0.9 mW (Class II)
Beam Divergence: 0.5 mrad
Wavelength: 650 nm (nominal)
*This product is controlled by export. Please see back cover for more information.
38
Use Hand-held or Weapon-mounted
apon-mounted
Ideal for Tactical Operations
rations
-34°C to +50°C Operational
ational Temp
Waterproof to 66ft.
4 Hour Run Time
VISIBLE LASER RADIATION
DIATION
AVOID DIRECT EYE EXPOSURE
XPOSURE
DANGER
PEAK POWER
4.3mW
WAVELENGTH
ELENGTH
0-655nm
640-655nm
CLASS IIIa LASER
SER PRODUCT
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
0.9mW
WAVELENGTH
650nm
CLASS II LASER PRODUCT
*This product is controlled by export.
Please see back cover for more information.
39
AIMIN
NG AND ILLU
UMIN
NATIO
ON
IM
MAGIN
NG PR
RODUCTS
AN/PEQ-14 (ILWLP- Integrated Laser
MTM
White Light Pointer)*
Insight’s Integrated Laser White Light Pointer (ILWLP) is a weapon-mounted
aiming device incorporating an infrared and visible aim laser as well as variable
P/N: DLM-1100-A2 (*ILWP/Lam 1000-IR Slide-Lock)
DLM-1150-A2 (ILWP/Lam 1000-VIS Slide-Lock)
DLM-1200-A2 (*ILWP/Lam 1000-IR Rail-Grabber)
DLM-1250-A2 (ILWP/Lam 1000-VIS Rail-Grabber)
DLM-1300-A2 (*ILWP/Lam 1000-IR Rail-Grabber (USP))
DLM-13500-A2 (ILWP/Lam 1000-VIS Rail-Grabber (USP))
DLM-1400-A2 (*ILWP/Lam 1000-IR MK23)
DLM-1450-A2 (ILWP/Lam 1000-VIS MK23)
Features
IR Illuminator
Output Power: 25 mW
Safety Class: 3B
Beam Divergence: 50 mrad (nominal)
Wavelength: 820-850 nm
Specifications
• Functions In Sunlight
or Total Darkness
• Penetrates Most
Weather Conditions
• Sensitivity to .07°
Temperature Differences
• White Hot or Black Hot
• Low Battery Indicator
• Target Detection up to 600 meters
• Target Detection up to 1,500m
with Optional 3X Extender
• Weighs 11.8oz w/Batteries
• Powerful, Compact and Portable
• Integrated IR Laserr
• Helmet Mountable
e
• -34°C to +50°C
Operational Temp
• Waterproof to 66ft,
t,
Drop Tested to 6ft
• 4 Hour Run Time
Objective Lens
Battery
Compartment
Laser
Designator
Power/Menu
Button
insight
Weighing in at only 11.8 oz, including batteries, the MTM easily
fits in uniform pockets for quick deployment in the detection,
recognition and identification of potential suspects and victims.
• Enables an operator to engage
targets on the battlefield or in
close quarter combat in limited
visibility or total darkness
Top View
(actual size)
The MTM is a durable, lightweight hand-held thermal imager that
at
gives Law Enforcement agencies and first responders the ability to
y.
Dominate the Darkness® through its state-of-the-art technology.
et
The high-resolution imager allows detection of a man-sized target
out to 600 meters, recognition at 150 meters and identification at
70 meters. The optional 3x extender enhances detection out to
1,500 meters.
Dimensions: 4.1” L x 1.9” W x 2.1” H
Weight (with batteries): 6.0 oz.
Battery Type: (2) 3-volt lithium
Battery Life: >30 minutes continuous
white light operation
Output Power: 4.0 mW
Safety Class: 3A
Beam Divergence: .5 mrad
Wavelength: 640-670 nm
P/N: MTM-000-A4 (MTM-Visible Laser)
MTM-000-A6 (MTM-IR Laser)
Originally designed for the U.S. Armed Forces for use in military
operations, the MTM gives the user the ability to see in low light
and no light situations including smoke, fog and snow.
Specifications
Visible Aim Laser
Mini Thermal Monocular (AN/PAS-23)*
S-23)*
Up/Down
Buttons
Video Jack
Eyepiece
Focus Ring
DANGER
VISIBLE LASER RADIATION
NSN: 5855-01-538-0191
IR Aim Laser
AVOID DIRECT EYE EXPOSURE
White Light Illuminator
PEAK POWER
4.3mW
Output Power: >80 lumens
Output Power: .6 mW
Safety Class: 1
Beam Divergence: .5 mrad
Wavelength: 820-850 nm
WAVELENGTH
640-655nm
CLASS IIIa LASER PRODUCT
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
LASER POWER WAVELENGTH CLASS
IR
50mW
830nm
IIIb
VIS
<5mW
650nm
IIIa
Approved for public release DoD Ref: 08-S-1073.
WTM
Weapon-Mounted
nted Mini Thermal Monocular*
P/N: WTM-000-A14 (WTM-Visible
ble Laser)
WTM-000-A16 (WTM-IR Laser)
LBS
Laser Borelight System (AN/PEM-1)*
The Weapon-Mountable Mini
ni Thermal Monocular
features a Picatinny rail interface
erface and is hardened to
ecoil of 5.56mm tactical
withstand the sustained recoil
loads while still delivering
g unparalleled thermal
imaging capability.
P/N: LBS-300C (Laser Borelight System)
LBS-070 (5.56mm Mandrel)
LBS-071 (7.62mm Mandrel)
LBS-075 (9mm Mandrel)
LBS-172 (.338 Cal. Mandrel)
LBS-079 (.50 Cal. Mandrel)
LBS-135-A1 (40mm Mandrel)
Other calibers are available.
Contact your L-3 Insight Sales Representative for more information.
•
•
•
•
•
Insight’s Laser Borelight System provides a fast and exceptionally precise method for zeroing any aiming laser, day optic, iron sight,
and thermal imaging sight to the host weapon without ever having to fire a round. The LBS can be used with any weapon-sight
combination using naked eyes, direct view optics or a night vision device.
DANGER
• Mandrels available for 5.56mm†, 7.62mm†, 9mm, .338 cal., .50 cal†, 40mm, etc.
Specifications:
Dimensions: 3.8” L x 1.25” W x 2.3” H
Weight: 4.1 oz. w/Battery
Battery Type: (1) AA alkaline
Battery Life: 8 hours
Visible Laser
Output Power: 0.9 mW (Class II)
Beam Divergence: 0.5 mrad
Wavelength: 650 nm (nominal)
*This product is controlled by export. Please see back cover for more information.
38
Use Hand-held or Weapon-mounted
apon-mounted
Ideal for Tactical Operations
rations
-34°C to +50°C Operational
ational Temp
Waterproof to 66ft.
4 Hour Run Time
VISIBLE LASER RADIATION
DIATION
AVOID DIRECT EYE EXPOSURE
XPOSURE
DANGER
PEAK POWER
4.3mW
WAVELENGTH
ELENGTH
0-655nm
640-655nm
CLASS IIIa LASER
SER PRODUCT
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
0.9mW
WAVELENGTH
650nm
CLASS II LASER PRODUCT
*This product is controlled by export.
Please see back cover for more information.
39
IMAGING
G PRODUC
CTS
CNVD-T
(Clip-On Night Vision Device - Thermal)
(SU-232/PAS)*
P/N: CQB-001-A7 (Tan)
Specifications
Insight’s CNVD-T (Clip-On Night
thermal
g Vision Device-Thermal) is a weapon-mounted
p
weapon sight. The thermal imaging
aging capability
of the CNVD-T allows for observation
vation
n
and target identification underr
adverse conditions including
light rain, smoke, light snow,
and low light to total darkness..
The CNVD-T incorporates
a reticle used for
weapon aiming.
CNVD-T3 (Clip-on Night Vision Device - Thermal T3)*
P/N: CT3-001-A3
• Designed for use with magnified optics
• Insight’s Ultra VOx® enhanced thermal imager
• Offers quick “clip-on, clip-off ” thermal capabilities
• Picture taking capability. Able to capture and
store images for download to a personal computer
Specifications
Dimensions: 7.2” L X 4.0” W X 4.3” H
Weight (with batteries): 36 oz.
Battery Type: (2) 3-volt lithium
Battery Life: 4.5 hours
Magnification: 1X (2X digital zoom)
Focus Range: 4m to infinity
Frame Rate: 60 Hz
Recognition Range: ~2465m
NSN: N/A
DANGER
VISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
PEAK POWER
4.3mW
Approved for public release OSR Ref: 09-S-0098.
WAVELENGTH
640-655nm
CLASS IIIa LASER PRODUCT
RULR (Ruggedized Ultra-Light Rangefinder)*
P/N: RLR-000-A5
pon--mounted laser rangefinder
Insight’s Ruggedized Ultra-Light Rangefinder (RULR) is a handheld or weapon-mounted
with a visible boresight laser, wireless remote display, and wireless remote activation
activation
designed for sniper applications.
• Remote LED display
• Handheld capability, integral red dot sight and LCD readout
• Rapid zeroing, integral visible boresight laser
• Quick release mounts
Specifications
Size: 6.6” L x 3.2” W x 1.9” H
Weight: 14.56 oz.
Battery Type: (2) 3-volt lithium
Battery Life: >12 hours
Laser Rangefinder
CNVD-T2
(Clip-On Night Vision Device - Thermal
al 2)*
Red Dot
Safety Class: 3A
Output Power: 4.5 mW (+ .45 mW)
Beam Divergence: .5 mrad (+ 0.3 mrad)
d)
Wavelength: 635 nm (nominal)
Remote Display
Dimensions: 3.11” L x .81” W x 1.55” H
Weight: .15 lbs. with battery
Battery Type: 1.5 volt N cell
Battery Life: >10 hours
Mounting Interface: Adjustable clamp mount to scope eyepiece
Wavelength: 650 nm (nominal)
P/N: CQT-001-A12
• Insight’s Ultra VOX®
enhanced thermal imager
• “Clip-On, Clip-Off ” thermal capabilities
• Designed for use with magnified optics
• Picture taking capability - Able to capture
and store images for download to a
personal computer
Safety Class: 1
Maximum Range: 8500m
Minimum Range: 25m
Range Accuracy: + 1.5m
Visible Borelight Laser
Specifications
Dimensions†: 5.3” L X 2.8” W X 3.4”
3.4” H
Weight: 20 oz. w/Batteries
Battery Type: (2) 3-volt lithium
um
Battery Life: 4.5 hours
Magnification: 1X (2X digital
al zoo
zoom)
om)
Focus Range: 3m to infinity
Frame Rate: 60 Hz
Recognition Range: ~1500m
m
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
Approved for public release OSR Ref: 10-S-0165.
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
*This product is controlled by export. Please see back cover for more information.
DANGER
VISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
PEAK POWER
4.3mW
WAVELENGTH
640-655nm
CLASS IIIa LASER PRODUCT
† Dimensions include the objective lens cover and weapon mount.
*This product is controlled by export. Please see back cover for more information.
40
41
insight
Dimensions: 6” L x 2.7” W x 3.3” H
Weight: 21 oz. w/Batteries
Battery Type: (4) 3-volt lithium
Battery Life: 8.5 hours
Field of View: 25° diagonal
Magnification: 1X with 2X digital zoom
Focus Range: 1m to infinity
Frame Rate: 60 Hz
Detection Range: ~600m (stationary man)
IMAGIN
NG PR
RODUCTS
S AND
D PREC
RECISION
ION TA
TAR
ARGET PRO
PRODUC
UCTS
IMAGING
G PRODUC
CTS
CNVD-T
(Clip-On Night Vision Device - Thermal)
(SU-232/PAS)*
P/N: CQB-001-A7 (Tan)
Specifications
Insight’s CNVD-T (Clip-On Night
thermal
g Vision Device-Thermal) is a weapon-mounted
p
weapon sight. The thermal imaging
aging capability
of the CNVD-T allows for observation
vation
n
and target identification underr
adverse conditions including
light rain, smoke, light snow,
and low light to total darkness..
The CNVD-T incorporates
a reticle used for
weapon aiming.
CNVD-T3 (Clip-on Night Vision Device - Thermal T3)*
P/N: CT3-001-A3
• Designed for use with magnified optics
• Insight’s Ultra VOx® enhanced thermal imager
• Offers quick “clip-on, clip-off ” thermal capabilities
• Picture taking capability. Able to capture and
store images for download to a personal computer
Specifications
Dimensions: 7.2” L X 4.0” W X 4.3” H
Weight (with batteries): 36 oz.
Battery Type: (2) 3-volt lithium
Battery Life: 4.5 hours
Magnification: 1X (2X digital zoom)
Focus Range: 4m to infinity
Frame Rate: 60 Hz
Recognition Range: ~2465m
NSN: N/A
DANGER
VISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
PEAK POWER
4.3mW
Approved for public release OSR Ref: 09-S-0098.
WAVELENGTH
640-655nm
CLASS IIIa LASER PRODUCT
RULR (Ruggedized Ultra-Light Rangefinder)*
P/N: RLR-000-A5
pon--mounted laser rangefinder
Insight’s Ruggedized Ultra-Light Rangefinder (RULR) is a handheld or weapon-mounted
with a visible boresight laser, wireless remote display, and wireless remote activation
activation
designed for sniper applications.
• Remote LED display
• Handheld capability, integral red dot sight and LCD readout
• Rapid zeroing, integral visible boresight laser
• Quick release mounts
Specifications
Size: 6.6” L x 3.2” W x 1.9” H
Weight: 14.56 oz.
Battery Type: (2) 3-volt lithium
Battery Life: >12 hours
Laser Rangefinder
CNVD-T2
(Clip-On Night Vision Device - Thermal
al 2)*
Red Dot
Safety Class: 3A
Output Power: 4.5 mW (+ .45 mW)
Beam Divergence: .5 mrad (+ 0.3 mrad)
d)
Wavelength: 635 nm (nominal)
Remote Display
Dimensions: 3.11” L x .81” W x 1.55” H
Weight: .15 lbs. with battery
Battery Type: 1.5 volt N cell
Battery Life: >10 hours
Mounting Interface: Adjustable clamp mount to scope eyepiece
Wavelength: 650 nm (nominal)
P/N: CQT-001-A12
• Insight’s Ultra VOX®
enhanced thermal imager
• “Clip-On, Clip-Off ” thermal capabilities
• Designed for use with magnified optics
• Picture taking capability - Able to capture
and store images for download to a
personal computer
Safety Class: 1
Maximum Range: 8500m
Minimum Range: 25m
Range Accuracy: + 1.5m
Visible Borelight Laser
Specifications
Dimensions†: 5.3” L X 2.8” W X 3.4”
3.4” H
Weight: 20 oz. w/Batteries
Battery Type: (2) 3-volt lithium
um
Battery Life: 4.5 hours
Magnification: 1X (2X digital
al zoo
zoom)
om)
Focus Range: 3m to infinity
Frame Rate: 60 Hz
Recognition Range: ~1500m
m
DANGER
LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER
5mW
Approved for public release OSR Ref: 10-S-0165.
WAVELENGTH
640±40nm
CLASS IIIa LASER PRODUCT
*This product is controlled by export. Please see back cover for more information.
DANGER
VISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
PEAK POWER
4.3mW
WAVELENGTH
640-655nm
CLASS IIIa LASER PRODUCT
† Dimensions include the objective lens cover and weapon mount.
*This product is controlled by export. Please see back cover for more information.
40
41
insight
Dimensions: 6” L x 2.7” W x 3.3” H
Weight: 21 oz. w/Batteries
Battery Type: (4) 3-volt lithium
Battery Life: 8.5 hours
Field of View: 25° diagonal
Magnification: 1X with 2X digital zoom
Focus Range: 1m to infinity
Frame Rate: 60 Hz
Detection Range: ~600m (stationary man)
IMAGIN
NG PR
RODUCTS
S AND
D PREC
RECISION
ION TA
TAR
ARGET PRO
PRODUC
UCTS
ELECTRO - OPTIC
CAL SYSTE
EMS
NIG
GHT VISIION GOGGL
LES
model M953™
The M953 is a rugged, lightweight binocular based upon the military
nomenclature AN/PVS-15 used by US Special Forces. Its twin-tubed
design is comparable to high tech aviation systems and provides
better depth perception than single tube designs. Handheld
or helmet mounted, the M953 is battle proven to withstand any
vehicle, assault, or amphibious operation.
ABOUT EOS
L-3 EOS is a leading supplier of electro-optical and applied optics technologies that continue to ensure the security and
freedom of our nation and its allies. L-3 EOS’ products encompass multiple applications and environments that demand
the most advanced and reliable technology available. With over 40 years of experience, L-3 EOS offers multiple night vision
products, including monoculars, binoculars, weapon sights, driver viewers, infrared modules and image intensifiers. In
combination with its vast night vision portfolio, EOS has developed and fielded the first digital Fusion (I2 & IR) weapon sight
solutions. These products utilize next-generation technologies, including the ability to achieve net-centric communications.
L-3 EOS’s state of the art applied optics facility is a leading supplier of advanced optical coatings and precision
opticalfabrications, and continually works to maintain their position as a leading supplier for military and commercial
applications.
HOW NIGHT VISION WORKS
Night vision systems can be categorized as 1st, 2nd, or 3rd Generation. Gen III is
used most by military and law enforcement and is the most sophisticated version
to date. Here, a sensitive chemical, Gallium Arsenide, was added to provide a
brighter, sharper image as compared to Gen I and II image intensifiers.
Generation III night vision is recognized the world over as a leading differentiator
in the modern battlefield, changing urban settings and demanding tactical
engagements. EOS is a leader in developing cutting-edge Gen III and Next-Gen
night vision weapon sights and goggle systems for discriminating governments,
soldiers, police units and others that demand the finest night vision available.
model M963™ (AN/PVS-7)
Order Code: M963 (AN/PVS-7)
Magnification: 1X
Field of view: 40.0˚
Objective Lens: 26mm (1 in)
Minimum Focus Distance: 25cm (9.8 in)
Eye Relief: 15mm (0.6 in)
Diopter Adjustment: +2 to -6
Gen III Image
Intensification Tube Option: Defender*
-Resolution: 64 lp/mm (min)
-Signal/noise: 21.0:1 (min)
- FOM: Unrestricted
*Defender tube not available for foreign sales
Power Source: 2 AA batteries
Battery Life: ~ 40 hours at room temperature
Length/Width/Height:
14.1 cm L x 15.6 cm W (5.5 in L x 6 in W)
Weight: 650 g with mask assembly (1.4 lbs)
Color: Black
Mounts: Head and Helmet Mount Adapter
Head Mount, Optional Helmet Mount
Order Code: Model 245000-006 (DEFENDER)
Warranty: 1 year
EOS
Night vision systems work by gathering small amounts of light, such as
moonlight, starlight or infrared light, through the lenses at the front. This light
consists of photons which are particles of light. As they enter the lens of the
night vision device, they strike a light-sensitive surface called a photocathode.
The photocathode converts the photons into tiny, subatomic particles that carry
electricity called Electrons. The electrons are then amplified to a greater number
by passing through a microchannel plate (MCP). Once amplified, the electrons
travel through a phosphorous screen that converts the electrons back into
photons that enable an operator to view a virtually dark environment.
Order Code: M953 (AN/PVS-15)
Length/Width/Height: Call Factory for Details
Weight: 25.6 oz (726g)
Magnification: 1X
Field of View: 40°
Objective Lens: 1.1 in (27mm)
Min. Focus Distance: 9.8 in (25cm)
Eye Relief: 1 in (25mm)
Diopter Adjustment: +2 to -6
Gen III Intensification (I2) Tube: Defender
Resolution: 64 lp/mm (min)
Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 16 hrs @ room temp.
Waterproof: Submersible to 66ft (20m)
Mount: Helmet mount adapter
• Typically worn either head or
helmet mounted
• When used with optional helmet mount,
goggle will automatically shut off in
the up position
• An active projected infrared LED provides
short range illumination allowing such
activities as map reading, night repairs
or maintenance tasks
• Self-contained system operating
on two AA batteries
• Low-battery indicator in eyepiece
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S.
Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR),
Title 22, Code of Federal Regulations, Parts 120 - 130.
All L-3 Communications Electro-Optical Systems Night Vision products are controlled under the U.S. International
Traffic in Arms Regulations (ITAR) USML Category XII (c), and may not be exported to a foreign person, either in the U.S. or
abroad, without a license or exemption from the U.S. Department of State.
42
This graphic consists of L-3 Communications Corporation general product photographs that do not contain controlled
technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations
(EAR) Part 734.7-11.
Cleared by DoD/OSR for Public Release Under Ref. 09-S-0795 on March 10, 2009.
43
ELECTRO - OPTIC
CAL SYSTE
EMS
NIG
GHT VISIION GOGGL
LES
model M953™
The M953 is a rugged, lightweight binocular based upon the military
nomenclature AN/PVS-15 used by US Special Forces. Its twin-tubed
design is comparable to high tech aviation systems and provides
better depth perception than single tube designs. Handheld
or helmet mounted, the M953 is battle proven to withstand any
vehicle, assault, or amphibious operation.
ABOUT EOS
L-3 EOS is a leading supplier of electro-optical and applied optics technologies that continue to ensure the security and
freedom of our nation and its allies. L-3 EOS’ products encompass multiple applications and environments that demand
the most advanced and reliable technology available. With over 40 years of experience, L-3 EOS offers multiple night vision
products, including monoculars, binoculars, weapon sights, driver viewers, infrared modules and image intensifiers. In
combination with its vast night vision portfolio, EOS has developed and fielded the first digital Fusion (I2 & IR) weapon sight
solutions. These products utilize next-generation technologies, including the ability to achieve net-centric communications.
L-3 EOS’s state of the art applied optics facility is a leading supplier of advanced optical coatings and precision
opticalfabrications, and continually works to maintain their position as a leading supplier for military and commercial
applications.
HOW NIGHT VISION WORKS
Night vision systems can be categorized as 1st, 2nd, or 3rd Generation. Gen III is
used most by military and law enforcement and is the most sophisticated version
to date. Here, a sensitive chemical, Gallium Arsenide, was added to provide a
brighter, sharper image as compared to Gen I and II image intensifiers.
Generation III night vision is recognized the world over as a leading differentiator
in the modern battlefield, changing urban settings and demanding tactical
engagements. EOS is a leader in developing cutting-edge Gen III and Next-Gen
night vision weapon sights and goggle systems for discriminating governments,
soldiers, police units and others that demand the finest night vision available.
model M963™ (AN/PVS-7)
Order Code: M963 (AN/PVS-7)
Magnification: 1X
Field of view: 40.0˚
Objective Lens: 26mm (1 in)
Minimum Focus Distance: 25cm (9.8 in)
Eye Relief: 15mm (0.6 in)
Diopter Adjustment: +2 to -6
Gen III Image
Intensification Tube Option: Defender*
-Resolution: 64 lp/mm (min)
-Signal/noise: 21.0:1 (min)
- FOM: Unrestricted
*Defender tube not available for foreign sales
Power Source: 2 AA batteries
Battery Life: ~ 40 hours at room temperature
Length/Width/Height:
14.1 cm L x 15.6 cm W (5.5 in L x 6 in W)
Weight: 650 g with mask assembly (1.4 lbs)
Color: Black
Mounts: Head and Helmet Mount Adapter
Head Mount, Optional Helmet Mount
Order Code: Model 245000-006 (DEFENDER)
Warranty: 1 year
EOS
Night vision systems work by gathering small amounts of light, such as
moonlight, starlight or infrared light, through the lenses at the front. This light
consists of photons which are particles of light. As they enter the lens of the
night vision device, they strike a light-sensitive surface called a photocathode.
The photocathode converts the photons into tiny, subatomic particles that carry
electricity called Electrons. The electrons are then amplified to a greater number
by passing through a microchannel plate (MCP). Once amplified, the electrons
travel through a phosphorous screen that converts the electrons back into
photons that enable an operator to view a virtually dark environment.
Order Code: M953 (AN/PVS-15)
Length/Width/Height: Call Factory for Details
Weight: 25.6 oz (726g)
Magnification: 1X
Field of View: 40°
Objective Lens: 1.1 in (27mm)
Min. Focus Distance: 9.8 in (25cm)
Eye Relief: 1 in (25mm)
Diopter Adjustment: +2 to -6
Gen III Intensification (I2) Tube: Defender
Resolution: 64 lp/mm (min)
Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 16 hrs @ room temp.
Waterproof: Submersible to 66ft (20m)
Mount: Helmet mount adapter
• Typically worn either head or
helmet mounted
• When used with optional helmet mount,
goggle will automatically shut off in
the up position
• An active projected infrared LED provides
short range illumination allowing such
activities as map reading, night repairs
or maintenance tasks
• Self-contained system operating
on two AA batteries
• Low-battery indicator in eyepiece
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S.
Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR),
Title 22, Code of Federal Regulations, Parts 120 - 130.
All L-3 Communications Electro-Optical Systems Night Vision products are controlled under the U.S. International
Traffic in Arms Regulations (ITAR) USML Category XII (c), and may not be exported to a foreign person, either in the U.S. or
abroad, without a license or exemption from the U.S. Department of State.
42
This graphic consists of L-3 Communications Corporation general product photographs that do not contain controlled
technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations
(EAR) Part 734.7-11.
Cleared by DoD/OSR for Public Release Under Ref. 09-S-0795 on March 10, 2009.
43
NIGHT VISIO
ON GOGG
GLES
model M983™
• Can be combined with an SLR camera, CCTV or camcorder system
• Offers capabilities of a hand-held pocket scope, a right or left eye-mounted monocular and a weapon sight
when mounted in conjunction with an infrared laser aimer other other night vision-compatible primary optic
• An active projected infrared LED provides short range illumination allowing such activities as map reading
• Self-contained system operating on a single AA battery
• Low-battery indicator in eyepiece
Order Code: M983 (AN/PVS18)
Magnification: 1X
Field of view: 40.0˚
Objective Lens: 27mm (1.1 in)
Minimum Focus Distance: 25cm (9.8 in)
Eye Relief: 25mm (1 in)
Diopter Adjustment: +2 to -6
Gen III Image
Intensification Tube Option: Defender
-Resolution: 64 lp/mm (min)
-Signal/noise: 21.0:1 (min)
- FOM: Unrestricted
Power Source: 1 AA battery
Battery Life: ~ 40 hours at room temperature
Length/Width/Height:
16.8 cm L(with eyecup) x 9 cm W x 6.5 cm H
(6.6 in L (with eyecup) x 3.5 in W x 2.6 in H)
Weight: 370 g with battery (.8 lbs)
Color: Black
Mounts: Head and Helmet Mount Adapter
Weapon Mount Adapter for Picatinny Rail
(MIL-STD-1913/STANAG 2324)
Order Code: Model 245030-006 (DEFENDER)
Warranty: 1 year
NIG
GHT VISIION WEAPO
ON SIGHTS
S
model M955™
The M955 offers dual capability by providing precise medium range target acquisition or handheld
observational use. With 2.25X magnification, this unit is an ideal solution for military situations ranging
from routine patrol to interdiction and eradication. In addition, the M955 offers a momentary
On/Off control to conserve battery power while providing a “quick look” capability.
Order Code: M955
(AN/PVS-17A/B)
Length/Width/Height: Call Factory for Details
Weight: 32.5 oz (920g)
Magnification: 2.25X
Field of View: 20 x 17
Objective Lens: 2.1 in (54mm)
Min. Focus Distance: 27.3 yd, Fixed (25m)
Diopter Adjustment: +3 to -3
Detection Range: 328 yds (300m)
Gen III Intensification (I2) Tube: Defender
- Resolution: 64 lp/mm (min) Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 20+ hrs Alkaline
(32 hrs lithium) @ room temp.
Mount: Mount for MIL-STD 1913 rail
model M957™
The M957 weapon sight is based upon the military nomenclature AN/PVS-17C Miniature Night Sight (MNS)
used by US Special Forces and USMC. It offers 4.5X magnification with fixed focus objective lens, an internally
projected red dot aim point, and automatic brightness control. This US manufactured image intensifier (I2)
tube is ideal for low light surveillance, border and perimeter security, and long range target acquisition.
EOS
Order Code: M957 (AN/PVS-17C)
Length/Width/Height: Call Factory for Details
Weight: 48 oz (1360g)
Magnification: 4.5X
Field of View: 9.2°
Objective Lens: 4.3 in (108mm)
Min. Focus Distance: 27.3 yd, Fixed (25m)
Diopter Adjustment: +3 to -3
Detection Range: 546.8 yds (500m)
Gen III Intensification (I2) Tube: Defender
Resolution: 64 lp/mm (min) Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 20+ hrs Alkaline
(32 hrs lithium) @ room temp.
Mount: Mount for MIL-STD 1913 rail
model M914™
The M914 is one of the most versatile night vision systems available today. It can be used as a
hand-held pocket scope, a helmet mounted monocular, or a weapon sight when mounted in
tandem with an infrared laser aimer or other night vision compatible primary optic. Additional
features include a low battery indicator located in the eyepiece and an active projected
infrared LED that provides short range illumination for activities such as map reading.
Order Code: M914 (AN/PVS-14)
Length/Width/Height: Call Factory for Details
Weight: 10.2 oz (290g)
Magnification: 1X
Field of View: 40°
Objective Lens: 1.1 in (27mm)
Min. Focus Distance: 9.8 in (25cm)
Eye Relief: 1 in (25mm)
Diopter Adjustment: +2 to -6
Gen III Intensification (I2) Tube: Defender
Resolution: 64 lp/mm (min)
Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 40 hrs @ room temp.
Mount: Head and helmet mount adapters
and Weapon mount adapter for MIL-STD 1913 rail
Single battery
Adjustable gain
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of
Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120 - 130.
This graphic consists of L-3 Communications Corporation general product photographs that do not contain controlled technical data as defined
within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.
Cleared by DOD/OSR for Public Release Under Ref: 09-S-0794 on February 23, 2009.
44
45
NIGHT VISIO
ON GOGG
GLES
model M983™
• Can be combined with an SLR camera, CCTV or camcorder system
• Offers capabilities of a hand-held pocket scope, a right or left eye-mounted monocular and a weapon sight
when mounted in conjunction with an infrared laser aimer other other night vision-compatible primary optic
• An active projected infrared LED provides short range illumination allowing such activities as map reading
• Self-contained system operating on a single AA battery
• Low-battery indicator in eyepiece
Order Code: M983 (AN/PVS18)
Magnification: 1X
Field of view: 40.0˚
Objective Lens: 27mm (1.1 in)
Minimum Focus Distance: 25cm (9.8 in)
Eye Relief: 25mm (1 in)
Diopter Adjustment: +2 to -6
Gen III Image
Intensification Tube Option: Defender
-Resolution: 64 lp/mm (min)
-Signal/noise: 21.0:1 (min)
- FOM: Unrestricted
Power Source: 1 AA battery
Battery Life: ~ 40 hours at room temperature
Length/Width/Height:
16.8 cm L(with eyecup) x 9 cm W x 6.5 cm H
(6.6 in L (with eyecup) x 3.5 in W x 2.6 in H)
Weight: 370 g with battery (.8 lbs)
Color: Black
Mounts: Head and Helmet Mount Adapter
Weapon Mount Adapter for Picatinny Rail
(MIL-STD-1913/STANAG 2324)
Order Code: Model 245030-006 (DEFENDER)
Warranty: 1 year
NIG
GHT VISIION WEAPO
ON SIGHTS
S
model M955™
The M955 offers dual capability by providing precise medium range target acquisition or handheld
observational use. With 2.25X magnification, this unit is an ideal solution for military situations ranging
from routine patrol to interdiction and eradication. In addition, the M955 offers a momentary
On/Off control to conserve battery power while providing a “quick look” capability.
Order Code: M955
(AN/PVS-17A/B)
Length/Width/Height: Call Factory for Details
Weight: 32.5 oz (920g)
Magnification: 2.25X
Field of View: 20 x 17
Objective Lens: 2.1 in (54mm)
Min. Focus Distance: 27.3 yd, Fixed (25m)
Diopter Adjustment: +3 to -3
Detection Range: 328 yds (300m)
Gen III Intensification (I2) Tube: Defender
- Resolution: 64 lp/mm (min) Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 20+ hrs Alkaline
(32 hrs lithium) @ room temp.
Mount: Mount for MIL-STD 1913 rail
model M957™
The M957 weapon sight is based upon the military nomenclature AN/PVS-17C Miniature Night Sight (MNS)
used by US Special Forces and USMC. It offers 4.5X magnification with fixed focus objective lens, an internally
projected red dot aim point, and automatic brightness control. This US manufactured image intensifier (I2)
tube is ideal for low light surveillance, border and perimeter security, and long range target acquisition.
EOS
Order Code: M957 (AN/PVS-17C)
Length/Width/Height: Call Factory for Details
Weight: 48 oz (1360g)
Magnification: 4.5X
Field of View: 9.2°
Objective Lens: 4.3 in (108mm)
Min. Focus Distance: 27.3 yd, Fixed (25m)
Diopter Adjustment: +3 to -3
Detection Range: 546.8 yds (500m)
Gen III Intensification (I2) Tube: Defender
Resolution: 64 lp/mm (min) Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 20+ hrs Alkaline
(32 hrs lithium) @ room temp.
Mount: Mount for MIL-STD 1913 rail
model M914™
The M914 is one of the most versatile night vision systems available today. It can be used as a
hand-held pocket scope, a helmet mounted monocular, or a weapon sight when mounted in
tandem with an infrared laser aimer or other night vision compatible primary optic. Additional
features include a low battery indicator located in the eyepiece and an active projected
infrared LED that provides short range illumination for activities such as map reading.
Order Code: M914 (AN/PVS-14)
Length/Width/Height: Call Factory for Details
Weight: 10.2 oz (290g)
Magnification: 1X
Field of View: 40°
Objective Lens: 1.1 in (27mm)
Min. Focus Distance: 9.8 in (25cm)
Eye Relief: 1 in (25mm)
Diopter Adjustment: +2 to -6
Gen III Intensification (I2) Tube: Defender
Resolution: 64 lp/mm (min)
Signal/Noise: 21.0:1 (min)
FOM: Unrestricted
Power Source: (1) AA Battery
Operating Time: Approx. 40 hrs @ room temp.
Mount: Head and helmet mount adapters
and Weapon mount adapter for MIL-STD 1913 rail
Single battery
Adjustable gain
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of
Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120 - 130.
This graphic consists of L-3 Communications Corporation general product photographs that do not contain controlled technical data as defined
within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.
Cleared by DOD/OSR for Public Release Under Ref: 09-S-0794 on February 23, 2009.
44
45
NIIGHT
T VIS
SION WEAP
PON SIGHTS
HANDH
HELD THERMAL
LS
model M2124™
model X200xp™
The M2124 is a rugged, clip-on night vision device (CNVD) based upon the military
nomenclature AN/PVS-24 used by U.S. Special Operations Forces. The advanced design of
the M2124 eliminates the typical requirement of removing a primary (day) sighting system since
the CNVD mounts in line with a standard day optical sight. Combining day and night vision sights
eliminates the need to re-zero, since the primary sight remains undisturbed. Additional advantages to
supplementing a primary sighting system with the M2124 include maintaining a user’s consistent eye relief
and shooting position as well as retaining user muscle memory. By operating the locking quick-disconnect,
single-throw lever mounting system provided, the M2124 easily attaches to a MIL-STD-1913 rail interface system. The
unit may also be used as a hand-held observation device.
Order
d Code: M2124
(PVS-24 Type)
Length/Width/Height:
h/H ight:
Call Factory for Details
Weight: 27.2 oz (771 g)
Magnification: 1.0X
Field of View: 40.0º
Objective Lens: 55 mm
The X200xp delivers advanced thermal imaging technology to
everyday heroes charged with Reconnaissance, surveillance,
or first respond missions. The X200xp offers greater scene
detail with Improved clarity, sharpness, and overall image
quality; perfect for challenging conditions like dust, smoke
or complete darkness.
Order Code: X200xp
Length/Width/Height: 5.25” x 4.5” x 2” (13.4 x 11.4 x 5.1cm)
Weight: 13 oz
Pixel Count (Resolution): 160 x 120
Thermal Sensitivity: ≤50mK
Field of View (HxW): 11° x 8°
Power Source (2) AA batteries
Operating Time: Approx. 2.5 hr (Alkaline), 6 hr (Lithium) @ 77°
Operating Temp: -4°F to 140°F (-20°C to 60°C)
Waterproof: 9ft (3m)
Shockproof: up to 6ft (2m) drop
Output Format: NTSC on rear outlet jack
Detection Range: 1500ft (450m)
Min. Focus Range: 25 cm
Color: Black
Bla or Tan
Detection Range: 328 yds
d (300m)
(
G
Intensification
Gen III Intensifi
cation (I2) T
Tube: Defender
Power Source: 1 CR123 Lithium Battery
Operating Time: Approx. 16 hours @ room
temp.
Mount: MIL-STD 1913 rail
EOS
All L-3 Communications Electro-Optical Systems Night Vision products are controlled under the
U.S. International Traffic in Arms Regulations (ITAR) USML Category I (f), and may not be exported to a foreign
person, either in the U.S. or abroad, without a license or exemption from the U.S. Department of State.
model X50™
The X-50 sets the standard for affordable, small, lightweight thermal
imaging cameras. It is Pocket-sized, rugged and durable. Based on
the X200xp, the X-50 can detect human activity From more than
1000 ft away making it perfect for public safety, first responders,
and security operations.
Order Code: X-50
Length/Width/Height: 5.25” x 4.5” x 2” (13.4 x 11.4 x 5.1cm)
Weight: 13 oz (381g)
Pixel Count (Resolution): 100 x 80
Thermal Sensitivity: ≤150mK
Field of View (HxW): 11° x 8°
Power Source (2) AA batteries
Operating Time: Approx. 2 hr (Alkaline), 5 hr (Lithium) @ 77°
Operating Temp: +14°F to 122°F (-10°C to 50°C)
Waterproof: 9ft (3m)
Shockproof: up to 6ft (2m) drop
Output Format: NTSC on rear outlet jack
Detection Range: 1000ft (305m)
All L-3 Communications Electro-Optical Systems Night Vision products are controlled under the U.S.
International Traffic in Arms Regulations (ITAR) USML Category I (f), and may not be exported to a foreign
person, either in the U.S. or abroad, without a license or exemption from the U.S. Department of State.
46
47
NIIGHT
T VIS
SION WEAP
PON SIGHTS
HANDH
HELD THERMAL
LS
model M2124™
model X200xp™
The M2124 is a rugged, clip-on night vision device (CNVD) based upon the military
nomenclature AN/PVS-24 used by U.S. Special Operations Forces. The advanced design of
the M2124 eliminates the typical requirement of removing a primary (day) sighting system since
the CNVD mounts in line with a standard day optical sight. Combining day and night vision sights
eliminates the need to re-zero, since the primary sight remains undisturbed. Additional advantages to
supplementing a primary sighting system with the M2124 include maintaining a user’s consistent eye relief
and shooting position as well as retaining user muscle memory. By operating the locking quick-disconnect,
single-throw lever mounting system provided, the M2124 easily attaches to a MIL-STD-1913 rail interface system. The
unit may also be used as a hand-held observation device.
Order
d Code: M2124
(PVS-24 Type)
Length/Width/Height:
h/H ight:
Call Factory for Details
Weight: 27.2 oz (771 g)
Magnification: 1.0X
Field of View: 40.0º
Objective Lens: 55 mm
The X200xp delivers advanced thermal imaging technology to
everyday heroes charged with Reconnaissance, surveillance,
or first respond missions. The X200xp offers greater scene
detail with Improved clarity, sharpness, and overall image
quality; perfect for challenging conditions like dust, smoke
or complete darkness.
Order Code: X200xp
Length/Width/Height: 5.25” x 4.5” x 2” (13.4 x 11.4 x 5.1cm)
Weight: 13 oz
Pixel Count (Resolution): 160 x 120
Thermal Sensitivity: ≤50mK
Field of View (HxW): 11° x 8°
Power Source (2) AA batteries
Operating Time: Approx. 2.5 hr (Alkaline), 6 hr (Lithium) @ 77°
Operating Temp: -4°F to 140°F (-20°C to 60°C)
Waterproof: 9ft (3m)
Shockproof: up to 6ft (2m) drop
Output Format: NTSC on rear outlet jack
Detection Range: 1500ft (450m)
Min. Focus Range: 25 cm
Color: Black
Bla or Tan
Detection Range: 328 yds
d (300m)
(
G
Intensification
Gen III Intensifi
cation (I2) T
Tube: Defender
Power Source: 1 CR123 Lithium Battery
Operating Time: Approx. 16 hours @ room
temp.
Mount: MIL-STD 1913 rail
EOS
All L-3 Communications Electro-Optical Systems Night Vision products are controlled under the
U.S. International Traffic in Arms Regulations (ITAR) USML Category I (f), and may not be exported to a foreign
person, either in the U.S. or abroad, without a license or exemption from the U.S. Department of State.
model X50™
The X-50 sets the standard for affordable, small, lightweight thermal
imaging cameras. It is Pocket-sized, rugged and durable. Based on
the X200xp, the X-50 can detect human activity From more than
1000 ft away making it perfect for public safety, first responders,
and security operations.
Order Code: X-50
Length/Width/Height: 5.25” x 4.5” x 2” (13.4 x 11.4 x 5.1cm)
Weight: 13 oz (381g)
Pixel Count (Resolution): 100 x 80
Thermal Sensitivity: ≤150mK
Field of View (HxW): 11° x 8°
Power Source (2) AA batteries
Operating Time: Approx. 2 hr (Alkaline), 5 hr (Lithium) @ 77°
Operating Temp: +14°F to 122°F (-10°C to 50°C)
Waterproof: 9ft (3m)
Shockproof: up to 6ft (2m) drop
Output Format: NTSC on rear outlet jack
Detection Range: 1000ft (305m)
All L-3 Communications Electro-Optical Systems Night Vision products are controlled under the U.S.
International Traffic in Arms Regulations (ITAR) USML Category I (f), and may not be exported to a foreign
person, either in the U.S. or abroad, without a license or exemption from the U.S. Department of State.
46
47
EOTech Disclaimers
Clearance Notice- SU-231/PEQ cleared for public release by Maj. Ken Hoffman,
USAF: USSOCOM Public Affairs on July 6, 2006.
RealTree APD HD© 2006 of Jordan Outdoor Enterprises, Ltd., all rights reserved
1201 E. Ellsworth Rd.
Ann Arbor, MI 48108
Toll Free (888)-EOTHOLO
Fax (734)-741-8221
www.l-3com.com/eotech
Insight Disclaimers
Export Notice- Insight Technology products are controlled for export purposes
under the International Traffic in Arms Regulations (22 C.F.R. Chapter 1,
Subchapter M, Parts 120-130) and the Export Administration Regulations (15
C.F.R., Parts 730-744), and require U.S. Government authorization prior to the
export or transfer to a non-U. S. Person. Contact Insight Technology for details.
Trademark- “Insight”, the Eye logo, the Stylized “X”, “Slide-Lock”, and “Dominate the
Darkness” are Registered Trademarks. “X2”, “X2L”, “Rail- Grabber”, and “Built for
Battle”are Trademarks of Insight Technology Incorporated
9 Akira Way
Londonderry, NH 03053
Toll Free: (866) 509-2040
Fax: (603) 668-1084
Patents- One or more of these products may be covered by one or more of the
following U.S. Patents: 5,374,986; 5,400,540; 5,430,967; 6,185,854; 6,190,025;
6,574,901; 7,493,722; D522,031; D568,508 and D595,439. © 2010 Insight
Technology Incorporated
www.InsightTechnology.com
Where To Buy:
US Distributor List: http://www.eotech-inc.com/merchantlist.php
TLS Vendor: http://www.adstactical.com/default.html (GSA, DLA, 8A)
Military Exchange: http://aafes.com/
GSA: http://www.gsa.gov/portal/gsa/ep/home.do?tabld=0
GSA Contract # GS-07F-0182L (EOTech)
3414 Herrmann Drive
Garland, TX 75041
Tel: (972) 840-5700
Fax: (972) 271-2195
www.l-3com.com/eos
All specifications are subject to change.
© 2011 Master Catalog Rev A