Full Document Available Here PALLET JACK WORK METHOD STATEMENT PALLET JACK SAFE WORK METHOD STATEMENT – Part 1 Company Details ABN: Contact Name, Position and Phone number: Address: Project details Area: PL Project: E Company Name: Job Address: Job Description: Activity: Safe Use Of Manual Pallet Jack Signature: Job Title: SA Name: (Include names of workers who were consulted in relation to this SWMS) M Relevant workers must be consulted in the development, approval and communication of this SWMS Personnel responsible for monitoring and managing activity: Date: SWMS Approved by: Page 1 of 8 Name: Signature: Date: Overall Risk Rating After Controls 4 Acute 3 High 2 Moderate 1 Low ALL PERSONS INVOLVED IN TASK MUST HAVE THIS SWMS COMMUNICATED TO THEM PRIOR TO WORK COMMENCING • • • • • • Regular inspections and observations will be conducted by ______________to ensure SWMS is being complied with. Daily Tool Box Talks will be undertaken to identify, control and communicate additional site hazards. Work must cease immediately if incident or near miss occurs. SWMS must be amended in consultation with relevant persons. Amendments must be approved by ______________ and communicated to all affected workers before work resumes. SWMS must be made available for inspection or review as required by WHS legislation. Record of SWMS must be kept as required by WHS legislation (until job is complete or for 2 years if involved in a notifiable incident). DOCUMENT NO: S812.0184 Authorised by: Signature: Full Document Available Here: PALLET JACK WORK METHOD STATEMENT ACTIVITY : Safe Use of Manual Pallet Jack REVIEW NO: © SafetyCulture All rights reserved Date: DATE: Page 1 of 8- Version 8.0 Full Document Available Here PALLET JACK WORK METHOD STATEMENT Personal Protective Equipment Hand Protection E High Visibility PL Foot Protection Normal Requirements: Enclosed preferably safety footwear, high visibility shirt or vest & hand protection (gloves). Ensure all PPE meets relevant Australian Standards. Inspect, and replace PPE as needed. M Provide UV sun protection where required, (broad brimmed hat, UV rated clothing, SPF 30+ sunscreen, tinted safety glasses with adequate UV protection). Safety Notes Pallet Jacks are predominantly used in warehousing and storage areas where lifting by means of a forklift is not required and / or in areas where there is limited space to enable the safe movement of a forklift / pedestrian stacker. SA The key safety factors associated with the safe use of pallet jacks include the provision of training in the safe and correct use of the unit, awareness of the Safe Load Limit (SLL) or Safe Working Load (SWL) of the Pallet Jack, working on level & stable ground, only positioning a load on the pallet the operator is comfortable moving & being in control of the unit whilst in the motion of travel. DOCUMENT NO: S812.0184 Authorised by: Signature: Full Document Available Here: PALLET JACK WORK METHOD STATEMENT ACTIVITY : Safe Use of Manual Pallet Jack REVIEW NO: © SafetyCulture All rights reserved Date: DATE: Page 2 of 8- Version 8.0 Full Document Available Here PALLET JACK WORK METHOD STATEMENT Task Breakdown Possible Safety or Environmental Hazards RB Control Measures to Reduce risk RA Responsible Officer Lack of awareness in the safe use of the Pallet Jack could create: Personal Injury: - Crushing risk - Striking risk - Manual Handling risk 2M Ensure all employees have been trained / instructed on OH&S expectations - this includes: - Company OH&S induction; 1L - Specific training should include: PL Operators requirements E NOTE: RB = Risk Rating before controls implemented - RA = Risk Rating after controls are implemented. Safe Work Procedures; - Hazard identification processes; - Control measures including traffic management control & manual handling. M Training in Safe use of Pallet Jack Personal Injury: - Manual Handling Risk - Exposure to moving vehicles 2M SA Activity Preparation - Pre-inspection requirements - Safe Load Limit - Positioning of items on pallets - Safe movement of Pallet Jack Ensure that work area is set up to protect exposure to moving vehicles – this could include: 1L Positioning of witches hats / barriers & Signage indicating unloading activities are taking place. Identify a safe location for truck to park to safely unload product Ensure all employees have been trained in safe manual handling techniques Set up work area to minimize travel distance with loaded pallet jack. DOCUMENT NO: S812.0184 Authorised by: Signature: Full Document Available Here: PALLET JACK WORK METHOD STATEMENT ACTIVITY : Safe Use of Manual Pallet Jack REVIEW NO: © SafetyCulture All rights reserved Date: DATE: Page 3 of 8- Version 8.0 Full Document Available Here PALLET JACK WORK METHOD STATEMENT Task Breakdown Possible Safety or Environmental Hazards RB Control Measures to Reduce risk RA Responsible Officer Pre-Operational Checks 2M Integrity of pallets E NOTE: RB = Risk Rating before controls implemented - RA = Risk Rating after controls are implemented. Ensure that all pallets to be used are checked and in safe condition this includes: Integrity of Pallet Jack 1L PL All timbers are in good condition Free of sharp edges / nails & Free of scrap, rubbish and strapping. Ensure that Pallet jack is in safe working order, wheels secured, pump (lift & lower) mechanism operating correctly M Ground surfaces are free of trip hazards and other obstructions. Personal Injury: - Struck by moving vehicles - Manual handling risks - Slips, trips & falls - Crushing & striking risk 2M SA Operation Damage to product DOCUMENT NO: S812.0184 Authorised by: Signature: Ensure the unloading area is set up to reduce interaction of vehicles and pedestrians. (See above) 1L Ensure that only packages and loads are handled where the operator is comfortable. Do not place excessive weight onto pallets – Do not overload pallet jack. Do not stack pallets to high as the operators view will be obstructed Full Document Available Here: PALLET JACK WORK METHOD STATEMENT ACTIVITY : Safe Use of Manual Pallet Jack REVIEW NO: © SafetyCulture All rights reserved Date: DATE: Page 4 of 8- Version 8.0
© Copyright 2024