Download Report

RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
RDMark Laser Mark Software V1.0
Encryption
Function
Manual
Shenzhen Ruida Technology Co.,Ltd.
Tel: 0086-0755-26066687
Fax:: 0086-0755-26066687
Addr:No.501,5/F,Building2,Nanyou Tian'an Industry Park,Nanshan
District,Shenzhen,Guangdong Prov.
WEB: www.rd-acs.com
PostCode: 518052
Note: The actual mode of operation and feature setting are
inconsistent with this manual which caused by the software
upgrade.Please refer to software.
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
Click [File] -> [Password Setting].
If the system is not encrypted.The area of "Unlock ebtry" button will be
prohibited use.
At the input-box behind“Vendor right” to input the factory password .Then click
the "Enter" button to enter the password management interface.
If the system is not encrypted.The “Unlock mainboard” button is prohibited use .
1 Factory password settings
The RDMark software distinguishs the ordinary user and device manufacturer
according to the “Vendor Password”. Therefore, When you know the factory
password is considered to the equipment manufacturer and with full permission of
RDMark software .Which may contain some part that manufacturers do not want to
the end-user to modify (such as setting the encryption period, manufacturers can be
directly released the encryption)
Manufacturers need to modified the default factory password on the mainboard
to the exclusive manufacturer password .
Note: RDMark software’s default factory password is the RD8888.
Click"Vemdor Password” to enter the interface of factory password settings.
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
Input the old password and the new password and at the “Confirm Password”
repeat the new password again. Then Click the "Modify" button to complete the
factory password settings.
2 Period of password settings
Click "Period password" button.Enter the interface of period password setting.
The period of the password can be used for user management. such as
installment, product trial, the distributor of payment and so on.It will support 20
encrypted phases at most.Generally, The limit of the single-use number of days is less
than 200 days. After the expiration ,The control card will automatically lock the
machine. User will not be normally use the machine output processing.
The single encryption of number of days can be the same and set by yourself.
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
Set up the encrypted information. Click the "Save Password" button, select the
save path of the password file and save it.
Main Board encrypt successfully. The software will be prompted to create a
password successfully.
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
Open the password file that you saveed on your computer. You can see all of the
encryption password.
"1:" repesents the number of phases.The following password represents the
password of this period.The figures behind the password represents the encryption
number of days.
The following information is the second and the third encrypted information.
The last password is the cancel password.
The Cancel password is a total control password.Such as installment, assume that
the user in three phases payment. The results is that the users once payment
completed.You can use to the cancel password to the disarming of all encryption.
Manufacturers need to take good care of this password file.
3 Decryption
The motherboard is encrypted, The user can decrypt at any time.In many encryption
phase,If you decrypt the current phase. It is noteworthy that the motherboard will
automatically from the current phase into the next phase of the encryption process. In
other words, the current of the decryption time is the beginning time of next phase of.
Click [File] -> [Password setting].
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
Click the "Unlock entry".It will pop up the dialog box and input the password of
the current period .andClick the "Verification" button.
“Password (NO.1) "asked to enter the first phase of the password.
The user can enter a password of the first phase to remove the first phase of
encryption.
User Can directly input the cancel password to disarm all encryption.
If the operator is manufacturer. The maufacturer can also input the factory
password which inputs in the "Password Management" dialog box. and Click the
“Unlock mainboard "to cancel all encryption.
Extension
In some special circumstances, It may be appeared an extension. Such as the
encryption of the client machine has expired, but due to some special reasons to
request an extension payment. Manufacturers can generate an extension file to set up
the extension accoeding to the negotiated extension of the number of days.
The extension of files can be created by a small software "RuiDa motherboard
Encryption Authorization Manager” . The software runs are not required to connect
the motherboard.It can be produced on any computer. For the safety considerations of
manufacturers .The manufacturers use this software. It is recommended that the
person who is responsible for the management.
Whether it is an extension or follow-up will be introduced the re-encrypt All
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
need to enter the cancel password. The Cancel Password is the last password of the
saved password file from the motherboard .
The Cancel Password is created randomly .That you can think that the cancel
password is one-to-one correspondence with the motherboard.
Input "Cancel password" and "Extended Days" Click “save the extension of
authorization documents” to save the extension file.
After the extension file is created. The manufacturer can send the file to the
user.The license file can be loaded by the user.
The extended operation is limit . An encryption can be delayed 5 times.
The extension files just can use once. If user need a further extension that the
extension file must be recreated.
Re-encryption
Practical applications may also need to re-encrypted applications.Such as can not
be determined the payment in advance or payment changes. The manufacturer does
not need to be sent to the scene to re-encrypt, but only need to create the authorization
documents.Users to load the file that can be realized this function.
RuiDa RDMark Laser Marking Software V1.0 Encryption Manual
Re-encryption process is exactly the same as the aforementioned encryption
process.But the re-encryption is not necessary to connect the control card.And only
need to input the cancel password.
Set “encryption phases ” and" Single phase days ". Click the " Save encrypted
information "button will save the password file and the re-encrypted authorization
documents.
Note: When Software confirms the user has to load the re-encrypted license files,
The original password file is no longer valid. Keep the new password file and delete
the original password file to avoid confusion.
Payment Indicated
RDMark software also supports the payment of prompt display.
If the customer's device encryption will expire,Click "marking" button, the
software will prompt the user the remaining usage time that can remind customers to
pay on time.
Prompted the rules are as follows:
The remaining time over four days, without prompting.
The remaining time more than one day and less than four days. If continuously
use RDMark software that will prompt once.
The remaining time is less than 24 hours.Per-action "marking" button will be
prompted and display the remaining time with hour meter.
Manufacturers can define your own payment prompt content. There is a file
called "tips" with RDMark software’s installer. Manufacturers can be used Notepad to
open and edit the content. If the “tips” file have not installed with RDMark software
by manufacture. The default message is as follows:
Dear users:
Hello!
Thank you for using our laser marking machine.
Certain of your purchase price may be close to expire, please pay in a timely
manner.
Your support of our work ,I am very grateful!