order information - SD 150 - ex sounder/horn

1
DATASHEET -
SD 150 Ex SOUNDER/HORN
audible & visual signalling equipment
It has telephone initiated function and can be used as the second ring
output of industrial telephones which apply to special locations where the
environment is noisy on the engineering site.
The product is made in natural coloured GRP material. We provide colours
of Red (Ral 3001), Yellow (Ral 1003), Blue (Ral 5005) and Black (Ral 9004)
for customer’s selection. Other colours are also available upon customer’s
request.
main features • Ex d IIC T4~T6 • Zone 1 & 2 • Industrial Explosive
Gas Environment • IP 66/67 • GRP Material • Natural GRP Finish Colour
with No Painting • Electrical Board Replacable • 12-48V DC or 100-240V
AC Version • 3 Stages of Alarm Sound Output • 63 Tones • Every Stage
Tone Selected Separately • Sound Recording or Customization • Built-in
Volume Control • Stainless Steel Mounting Bracket • Telephone Inititated
Function Available • Standard: EN/IEC 60079-0, EN/IEC 60079-1, EN 54
description SD150 Ex Sounder/Horn was designed according to
EN/IEC 60079-0, EN/IEC 60079-1 and EN 54 standards. This product
is certified for use and installation in Zone 1 and Zone 2 areas. It especially
applies to Oil & Gas, Chemical, Petrochemical, Refinery, Marine and Offshore
Industries etc. for the high-corrosion and hazardous areas.
intended use
According to user control system, 3 stages of alarm tones can be sent out,
from less critical stage (stage 1) to the most critical stage (stage 3). Every
stage tone can be selected separately. 63 tones are available. Users can
record sounds or customize sounds into the sounder by using 4 spare tones.
Tones can be preset during installation.
order information product
number
SD 150
SD 150
● Zone 1 & 2
● Zone 21 & 22 ( pending)
- ex sounder/horn
duty
label
voltage
+
tag
label
A-M20
DC
12
~ 48V
Y
=
YES
Y
=
YES
AC
100
~ 240V
OR
OTHER
Other voltages available on request.
model configurator
SD 150
dimensions -
cabel entry
N
=
NO
N
=
NO
B-M25
finish colour
RD = RED
Y=YES
YW= YELLOW
C-½NPT
BU= BLUE
D-¾NPT
BL =BLACK
O-OTHER
telephone
initiated
N =NO
OR =OTHER
+
SD 150
- ex sounder/horn
22.01.13 | rev. 02 | page 1/2
norway | address: maskinveien 12, p.o.box 256 forus, 4066 stavanger, norway | phone: +47 51 63 00 70 | fax: +47 51 63 00 72 | e-mail:
[email protected] | web: www.ex-tech.no | france | phone: +33 545618168 | mobile: + 33 679530429 | uk | phone: +44 (0) 1625 268071 |
mobile: +44 (0) 7510 888025 | singapore | phone: +65 6795 3007 / 6492 9355 | fax: +65 6515 6525. for additional contact information
please refer to our website. please note that whilst effort has been made to ensure the accuracy of this datasheet. ex-tech will not assume
liability for the use thereof. ex-tech reserves the right to improve specifications without prior notice, please refer to our website for updated
information or contact our local sales representative .
2
DATASHEET -
SD 150 Ex SOUNDER/HORN
audible & visual signalling equipment
spareparts & accessories
Sounder Driver
50050140620
M20 Stainless Steel Ex d Blind Plug
55100110920
M20 Stainless Steel Ex d Cable Gland
CG SM020X
CG SM025X
Sounder PCB (DC)
50053530501
M25 Stainless Steel Ex d Blind Plug
55100110925
M25 Stainless Steel Ex d Cable Gland
Sounder PCB (AC)
50053530502
1/2NPT Stainless Steel Ex d Blind Plug
55100110821
1/2NPT Stainless Steel Ex d Cable Gland
CG SN012X
3/4NPT Stainless Steel Ex d Blind Plug
55100110843
3/4NPT Stainless Steel Ex d Cable Gland
CG SN034X
technical information ex code
atex marking
tones
sound output
ambient temperature
humidity
SD 150
- ex sounder/horn
● E x d IIC T4~T6
●
intended use
II 2 G
● 63 Tones
● Up to 115 dB @ 1M/1W
● -40 to + 70º C
● ≤ 95% RH
mechanical specification:
material
enclosure finish
ingress protection
weight
dimensions
● Enclosure: GRP (Glass Reinforced Polyester) Bracket: Stainless steel
● Zone 1 & 2
● Zone 21 & 22
( pending)
● Natural coloured material in: Red, yellow, blue, black or other (specify)
● IP 66/67
● 3,2 kg / 7,05 lb
● Length: 320 mm / 12.60"
Width: 282.1 mm / 11.11"
Height: 358.1 mm /14.10"
electrical specification:
power supply
power consumption
terminal
cable entry
certification
working current
● 12-48V DC or 100-240V AC
● 5-20W (adjustable)
● ≤ 2,5mm 2 Cable
● 2 x M20, M25, 1/2”NPT, 3/4”NPT or Others (Specify)
● ATEX, IECEX(Pending), IMETRO (Pendi ng), CQST
● 12V DC: 910mA (Max 10W)
110V AC: 210mA
24V DC: 960mA
220V AC: 100mA
48V DC: 500mA
22.01.13 | rev. 02 | page 2/2
norway | address: maskinveien 12, p.o.box 256 forus, 4066 stavanger, norway | phone: +47 51 63 00 70 | fax: +47 51 63 00 72 | e-mail:
[email protected] | web: www.ex-tech.no | france | phone: +33 545618168 | mobile: + 33 679530429 | uk | phone: +44 (0) 1625 268071 |
mobile: +44 (0) 7510 888025 | singapore | phone: +65 6795 3007 / 6492 9355 | fax: +65 6515 6525. for additional contact information
please refer to our website. please note that whilst effort has been made to ensure the accuracy of this datasheet. ex-tech will not assume
liability for the use thereof. ex-tech reserves the right to improve specifications without prior notice, please refer to our website for updated
information or contact our local sales representative .