Urban Griller
PO Box 327
Fremantle
WA 6160
0409840984
www.urbangriller.com
[email protected]
The Texas Offset BBQ Pits in this catalogue are handmade to order in Melbourne, the construction
can take up to 6 months depending on the current workload. Most of this time is waiting for your
order to come to the top of the queue.
The barrels are rolled from 6mm flat steel and the BBQ is fired as part of the tuning process before
final finishing and painting.
We take a 10% deposit before work begins; the balance is due before pick up.
Transport of the finished BBQ Pit is the responsibility of the buyer. Most customers use a domestic
removalist; the Pits travel the same ad an Upright Piano except that they are half the weight.
HANDMADE TEXAS SMOKER PITS
Every Texas BBQ smoker is handmade and fabricated in Melbourne, Australia, built to order from
the standard model to your personal design or modifications, the smoker pits are built with 6 mm
solid new plate steel which is rolled and welded, with meticulous detail.
More than a BBQ: A Work of Art
The Lone Star BBQ Pit
$3,500
A real backyard workhorse, the Lone Star offset BBQ pit is all you need to enter the world of real
Texas BBQ. A rock solid workhorse, this pit can do it all, Low and Slow smokey BBQ or high
temperature wood fire searing! Built solid to last, the Lone Star is real statement, the signature dual
chimneys make this pit stand out, easy to control and easy to work with this is a great all-rounder
pit!
Features:
6mm steel construction; Total Weight around 130 -150 kg
Overall length - 1400mm
Main cooking chamber 900 x 500mm Fire Box chamber – 500 x 500mm
3 Cooking racks 2 in the main chamber and one in the offset fire box
Charcoal grills in each chamber
500mm diameter, 6mm steel Firebox with double insulated overlap sealing door.
Large “peephole” sliding firebox vent
Lift up Firebox door to allow for easy access to cooking grill.
Side Access Firebox door to allow for easy cleaning of firebox and access to the fire
Polished timber storage deck
4 heavy duty castors (two locking) on trolley base
Slide away adjustable chimney damper caps with stainless steel chimney cap ferrules.
Dual Chimneys for a clean efficient draw
Huge 500 x 900mm cooking chamber with full width shaped overlap sealing door.
Full width internal drip protection lip on cooking chamber and firebox doors
Large 75mm (3inch) Pit temperature and firebox temperature gauges.
Drop down front prep shelf.
Stainless Steel “Cool Touch” handles on firebox and cooking chamber doors.
Counterbalance on cooking chamber door to reduce “lifting weight”.
1200°F/65°C heat resistant Satin Black fire paint
Options:
Larger HD 50mm wide Castors
$100
Full length Door hinge $350
End Prep Bench…..$100
Rotisserie kit…..12volt ………$120
Extra Temp gauge…………$75
Engraved name plate…………$120
Extend to 1meter cooking barrel……$250
Drain Cock fitted………$100
Drain Plugs $70
Stoker 10cfm fan port fitted………….$75
Iron Age BBQ Pit
$4,900
Big, Bold and Sexy, the Iron Age is the ultimate of form and function, a real work of art! A stylish
BBQ cooking beast, the Iron Age does everything with class! It doesn’t get better than this, a classic
Texas BBQ pit with grunt and personality!
Features:
6mm steel 1000x550mm cooking chamber with custom tuning plates
Overall length - 1500mm
Main chamber - 900 x 500mm
Fire Box chamber – 500 x 500mm
3 Cooking racks 2 in the main chamber and one in the offset fire box
Charcoal grills in each chamber
500mm diameter, 6mm steel Firebox with double insulated overlap sealing door.
Large “peephole” sliding firebox vent.
Lift up Firebox door to allow for easy loading of firebox and access to cooking grill.
Side Access Firebox door to allow for easy cleaning of firebox and access to the fire.
Polished timber storage deck.
4 heavy duty castors (two locking) on trolley base.
Stainless steel chimney cap ferrule
Large diameter chimney for a clean efficient draw.
Slide away adjustable chimney damper caps.
Huge 500 x 900mm cooking chamber with full width shaped overlap sealing door, Drain Plug in main
barrel.
Full width internal drip protection lip on cooking chamber and firebox doors.
Large 75mm (3inch) Pit temperature and firebox temperature gauges.
Drop down front prep and side service shelves.
Stainless Steel “Cool Touch” handles on firebox and cooking chamber doors.
Counterbalance on cooking chamber door to reduce “lifting weight”.
1200°F/65°C heat resistant Satin Black fire paint.
Extras:
Larger HD 50mm wide Castors
$100
Short Frame (for build in?)….an option, no price difference!
End Prep Bench…..$100
Rotisserie kit…..240v ………$160
Extra Temp gauge…………$75
Extra Temp gauge…………$75
Engraved name plate…………$120
Extend to 1.2 meter cooking barrel……$300
Weight around 130 -150 kg
Drain Cock fitted………$100
Stoker 10cfm fan port fitted………….$75
Texas Longhorn Pit
$4,900
Features:
6mm steel 1000 x 550mm cooking chamber with internal baffle plates
Overall length - 1400mm
Firebox chamber 500mm long by 350 wide
2 adjustable dampers between firebox and main chamber for draw and heat control.
2 slide out cooking racks in the main chamber
Charcoal grills in each chamber
Heat deflector plate in the main chamber.
6mm steel Firebox with double insulated overlap sealing door.
Large “peephole” sliding firebox vents.
Fold down Firebox door to allow for easy loading of firebox.
Polished timber trolley deck.
4 heavy duty castors (two locking) on trolley base.
Stainless steel chimney cap ferrules
Large diameter chimneys for a clean efficient draw.
Height adjustable chimney damper caps.
Huge 1metre x 550mm cooking chamber with full width shaped overlap sealing door.
Full width internal drip protection lip on cooking chamber door.
Large 75mm (3 inch) Pit temperature gauge.
Stainless Steel “Cool Touch” handles on firebox and cooking chamber doors.
1200°F/65°C heat resistant Satin Black fire paint.
Weight around 130 -150 kg
Extras
Larger HD 50mm wide Castors
Extra Temp gauge…………$75
Engraved name plate…………$120
Stoker 10cfm fan port fitted………….$75
$100
Rio Grande (Reverse Flow BBQ Pit)
$6,500
A reverse flow pit is specially engineered to provide an even heat in the cooking chamber. Heat and
smoke from the fire is channelled to the far end of the pit under a sealed steel plate in the base of
the cooking chamber, the plate heats and acts as a heat sink eliminating hotspots. The slightly
cooled smoke enters the cooking chamber at the far end of the cooker and flows gently across the
food before exiting at the fire pit end. This pit also has a warming plate on top of the fire box.
A fusion of art and engineering, the Reverse Flow Pit is the “Rolls Royce” of offset BBQ Pits.
Features:
6mm steel Total Weight around 130 -150 kg
2 adjustable “Fine Tuning” plates
550mm diameter x 1m cooking chamber with two easy access slide out cooking shelves.
Full length internal welded 6mm steel reverse flow baffle plate.
50mm diameter, 6mm steel Firebox with double insulated overlap sealing door.
Large “peephole” sliding firebox vent.
Side Access Firebox door with slide out Fire tray.
Full width warming tray on the top of the firebox.
Polished timber storage deck.
6 heavy duty castors (two locking) on trolley base.
Large Diameter Chimney for a clean efficient draw. Stainless steel chimney cap ferrule
Height adjustable domed chimney damper cap.
Huge 500 x 900mm cooking chamber with full width shaped overlap sealing door.
Full width internal drip protection lip on cooking chamber door.
Large 75mm (3inch) Pit temperature gauge.
Drop down front prep and end service shelf.
Stainless Steel “Cool Touch” handles on firebox and cooking chamber doors.
Counterbalance on cooking chamber door to reduce “lifting weight”.
1200°F/65°C heat resistant Satin Black fire paint.
Extras:
Larger HD Castors 50mm wide
$100
End Prep Bench…..$100
Rotisserie kit…..240v ………$160
Extra Temp gauge…………$75
Engraved name plate…………$120
Extend to 1meter cooking barrel……$250
Drain Cock fitted………$100
Stoker 10cfm fan port fitted………….$75
TRAILER SMOKER PITS
Custom smokers can be fabricated any size or shape to your specifications, trailer smoker pits can
also be made on request. Tailgate pits, Small trailer pits, grills and large catering rigs can be made to
specifications and are all fabricated from the ground up, any size, metal thickness or style.
Custom Design
Initial Design and costing work $500 deposit
(Deducted from the purchase if the project proceeds)
Urban Griller
PO Box 327
Fremantle
WA 6160
0409840984
www.urbangriller.com
[email protected]
The Texas Offset BBQ Pits in this catalogue are handmade to order, the construction can take up to
16 weeks depending on the current workload. The barrels are rolled from 6mm flat steel and the
BBQ is fired as part of the tuning process before final finishing and painting.
We take a 10% deposit before work begins; the balance is due before pick up.
Transport of the finished BBQ Pit is the responsibility of the buyer. Most customers use a domestic
removalist; the Pits travel the same ad an Upright Piano except that they are half the weight.