1. No category

FT HEAVY OIL INJECTOR
Underport burner
Multivariable
oil atomizer head
Oil
Quick fixing clamp
Atomizing
with air
or gas
(up to 40 %)
Cooling
during non
firing
period
Technical Data
Fuel:
Energy output:
Initial pressure:
Operation pressure:
Preheating:
Hybrid operation:
Tempering operation:
Atomizing:
Cooling air:
Heavy Oil, Diesel
0,26 ... 5 MW in 4 injector sizes
6 ... 10 bar
1 … 4 bar + pressure atomized air
90 ... 130 °C
Natural Gas 13 … 50 % caloric
All types of oil fuel possible
Air or Natural Gas 10 … 80 Nm³/h (0,5 … 3,0 bar)
8 … 25 Nm³/h (0,5 … 1,0 bar)
Technical Concept
Inside atomizer in a novel configuration, forming an optimal free jet flow
Optimizing of oil drop size distribution and minimizing of inside fuel deposition
Outside atomizer designed for NOx minimization with a new additional air cleaning ring, for protection against
carbonium deposition
Wide range of positioning by exposition of injector head and prepositioning at bracket and injector
Use of advanced sealing solutions, avoiding thermal caused sealing leakages and problems with tightness of oil
FlammaTec, spol. s r.o.
Rokytnice 60, 755 01 Vsetín, Czech Republic
T: +420 571 498 566, F: +420 571 498 599
[email protected], www.flammatec.com
FlammaTec Germany GmbH
Kiekebuscher Weg 14, 03050 Cottbus, Germany
T: +49 355 590 20 18, F: +49 355 54 11 24
[email protected], www.flammatec.com
Technological flexibility
Three different operation modes of atomizing adjustable:
Inside atomizing
Outside atomizing
Double- (combination) atomizing
Continuously variable adjustable inside and double atomizing
Primary flame cone angle:
15 ... 40° , depending on atomizing operation mode
Modular design of burner body and media supplying pipes
allows easy adaption to constructional limits of furnace design
Maintenance benefit
Atomizing gas parts stay free of oil
Clean situation around the injector’s working places
Even for low-quality fuels applicable
Long working cycles of the injector without maintenance
Long survival time in case of missing cooling air
Atomizer is tolerant towards missing oil preheating
Scope of supply
Heavy Oil injectors with the required capacity
Fully adjustable Injector brackets
Stainless steel flexible hoses
Options
Optimization of melting process, using CFD simulation
Renting and maintenance contract
Port design optimization
Regular service during and after warranty period
Control panels & safety trains delivery
FlammaTec, spol. s r.o.
Rokytnice 60, 755 01 Vsetín, Czech Republic
T: +420 571 498 566, F: +420 571 498 599
[email protected], www.flammatec.com
FlammaTec Germany GmbH
Kiekebuscher Weg 14, 03050 Cottbus, Germany
T: +49 355 590 20 18, F: +49 355 54 11 24
[email protected], www.flammatec.com