1. No category

T 604.549.9379
F 604.549.9555
W f l u x w e r x . c o m
Ceiling
(S) SURFACE INTEGRATED MOUNTING
Type
Project
Product
Notes
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Power Feed Canopy
integrated driver, suspension and power feed location
low profile design for 120V-277 V line voltage operation
for ceiling conditions with surface conduit or recessed jboxes
drivers and architectural canopies can be installed in advance
Powdercoat sheet metal architectural canopies; no visible fasteners
multiple orientations for easy installation and maintenance
self-retained architectural canopies with safety cable
integral barriered driver enclosure for line and low voltages
prewired driver with integral junction boxes
supplied with all pushwire and twistwire electrical connectors
multiple 1/2" trade knockouts for conduit; rigid or flexible
CONSTRUCTION
•
•
•
•
•
frame and driver enclosure formed in 20 gauge CRS; satin coat
canopy stamped in 22 gauge steel; white powdercoat
1/32” (0.8 mm) stainless steel aircraft cable; factory crimped
2 or 4 conductor #20 stranded LV powercord; silvered, clear jacket
prewired driver, #18 gauge solid; pushwire and twistwire connectors
APPROVALS
Suspension Canopy
•
Certified by UL for dry or damp location installation in US and Canada
Installation Example
Nominal
All rights reserved.
© Fluxwerx Illumination Inc 2015
24 ft
7.32 m
Length
Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have
limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.
SURFACE.pdf
Jun 2015
PAGE
1 of 2
(S) SURFACE INTEGRATED MOUNTING
dimensions
inches
(mm)
Suspension Canopy
Power
Suspension
18.63
(473)
5.22
(133)
1.98
(50)
Suspension Canopy
Mounting Bracket
0.28
(7)
5.23
(133)
7.00
(178)
4.14
(105)
7.00
(178)
21.16
(537)
Anchor Locations
Power Canopy
Driver + Power Canopy
Mounting Bracket
1.72
(44)
3.17
(80)
5.13
(130)
1.85
(47)
1.86
(47)
2.56
(65)
17.19
(437)
IMPORTANT
Fixture Direction
3.39
(86)
TYPICAL
ø 0.30
DIAMETER
MTG. HOLES ø (7.50)
3.17
(80)
Installation Wiring Details
3.50
(89)
4.62
(117)
Line Voltage Wiring (Driver to Panel)
Low Voltage Wiring (Driver to Fixture)
additional 1/2" trade knockout at rear driver for installation
with recessed jboxes
recessed jbox or conduit and wiring to/from panel;
supplied and installed by others
twistwire connectors supplied by Fluxwerx;
connected by others.
pushwire connectors supplied by Fluxwerx; connected by others
appropriate fasteners for attachment to building structure
supplied and installed by others
LV powercord preinstalled on fixture by Fluxwerx
integral safety restraint aircraft cable
canopy safety retention ring
Alternative Mounting Options
(D) Drywall Integrated
New or Retrofit
Integrated driver, power feed and mounting suspension points
suitable for GWB or plaster thicknesses of < 0.875” (22 mm)
Perpendicular or Parallel
Retrofit Method
(G) Grid Integrated
ON or OFF Grid
Integrated clip, driver, power feed and mounting suspension points
suitable for accessible ceiling grid heights of < 1.75” (44 mm)
(R) Remote
Hard Lid Ceilings
External remote mounted driver. Power feed and suspension
points suitable for exposed conduit or recessed junction boxes
Horizontal or Vertical
Detached Installation Method
120-277V
347V
Battery Pack
120-277V
347V
Battery Pack
120-277V
347V
Battery Pack
0-10V Dim
Lutron
50% BiLevel
0-10V Dim
Lutron
50% BiLevel
0-10V Dim
Lutron
50% BiLevel
All rights reserved.
© Fluxwerx Illumination Inc 2015
Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have
limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.
SURFACE.pdf
Jun 2015
PAGE
2 of 2