May 2015 - Village of Glenview

Report
May 2015
glenview.il.us
Water meter replacement to get started
Beginning next month, the Village of Glenview will start the
process of replacing or retrofitting all 16,000 residential and
commercial water meters within Glenview with new automated meters. Besides replacing aging units, the new meters
will use new technology to identify water
usage regularly and accurately. The new
meters will allow the Village to provide
better customer service and more details
on water usage.
The new meters will automatically
transmit readings wirelessly, eliminating the need to manually read each
meter. This way, the Village can be more
efficient and reduce water system costs by
preventing manual meter errors and eliminating the timeconsuming manual meter reading process.
Sometime over the next 14 months – through summer 2016
– each Glenview water customer will be contacted to set up
Why is Glenview replacing water meters?
Water meters across the
Village are approaching or beyond the
manufacturer’s recommended life span
of 20 years. As the
current mechanical water meters
age, they may slow
down and their accuracy in registering water consumption
decreases. The new water meters will
also achieve technological and customer
service benefits.
FAQs
Where is my water meter?
Most water meters are located inside the
house or business, and might be in a
an appointment to receive a new water meter.
The Village has awarded a contract to Siemens Industries to
perform this meter replacement. Siemens will need access
to each home and business in Glenview to
replace the meter. Siemens will work with
each household to arrange a convenient
appointment to complete this task.
Homeowners are asked to give installers
adequate clearance around the current
water meter, which might be located in
a basement, crawl space or utility closet.
There is no charge for participating in
this mandatory program. Under normal
circumstances, the replacement will take about 30 minutes,
during which time the water will be shut off.
Read the “Frequently Asked Questions” below for more.
basement, crawl space or utility closet.
Am I required to participate?
Yes, participation in this program is
mandatory. All meters in the Village,
both at homes and businesses, will be
replaced over the course of 14 months.
Your cooperation in scheduling an appointment after you receive a notification letter is appreciated.
How will I be contacted?
When the installers are in your area, you
will receive a letter in the mail from the
Village and Siemens to make an appointment, followed by reminder postcards, if necessary, and a door hangar if
an appointment has not been scheduled.
In this issue
This month in history............... Page 2 Invasive plant primer ............... Page 6
Bike Glenview is back .............. Page 4 Electric supply rates ................. Page 7
How does the system work?
The water usage data from each meter
will be transmitted wirelessly by a radio
signal to the Village.
Will anything be on the outside
of my building?
Yes. There will be a box (also called
a transmitter) on the outside of your
home. It will be located in or around
the same area that your current water
meter remote is located. The installer
will attempt to reuse the hardware that
is currently on your home or business.
How often will the new meter
transmit my data?
The meter will transmit a signal approx-
continued on page 3
MEMORIAL DAY OBSERVED
Village Hall will be closed on Monday,
May 25, in observance of Memorial Day.
See parade information on page 5.
It’s Our Town
Please Slow Down
Energy-saving ideas
Here are just a few simple things you can do to improve the
energy efficiency and comfort of your home as temperatures
warm, according to the U.S. Department of Energy:
z Service your air conditioner. Easy maintenance such
as routinely replacing or cleaning air filters can lower your
cooling system’s energy consumption by up to 15 percent.
z Open windows. Opening windows creates a cross-wise
breeze, which allows you to naturally cool your home without switching on air conditioners.
z Use ceiling fans. Cooling your home with ceiling fans
will allow you to raise your thermostat four degrees.
z Cook outside. Keep the heat out of your home by using
an outdoor grill instead of indoor ovens.
z Install window treatments. Energy-efficient window
treatments of coverings, such as blinds, shades and films,
can slash heat gain when temperatures rise.
z Caulk air leaks. Using low-cost caulk to seal cracks and
openings in your home keeps warm air out.
z Bring in sunlight. During daylight hours, switch off
artificial lights and use windows and skylights to brighten
your home.
z Set the thermostat. On warm days, setting a programmable thermostat to a higher setting when you are not at
home can help reduce your energy costs by approximately
10 percent.
z Seal ducts. Air loss through ducts can lead to high electricity costs, accounting for nearly 30 percent of a cooling
system’s energy consumption.
z Switch on bathroom fans. Bathroom fans suck out heat
and humidity from your home, improving comfort.
Recycle latex paint
Latex paint is not a hazardous material, and can be discarded
in the trash after it’s been hardened. In a protected and wellvented area, away from children and pets, remove the lid and
allow paint to naturally dry out over a period of time. This
method works best if the can is less than one-quarter full. For
fuller cans, mix shredded newspaper, kitty litter or a hardware
store-bought waste paint hardener to the paint can and allow
it to absorb and dry out over a period of time.
If you would rather recycle the paint, some
hardware stores in the area will accept it
for a small fee, including Glenview Ace Hardware, 1560
Waukegan Road, Glenview;
Millen Do It Best, 1219
Wilmette Avenue, Wilmette;
and Skokie Ace Hardware,
5035 Oakton St., Skokie.
2
Here are the May notifications of major speed radar
“hot spots” and stop sign/traffic light enforcement.
At these locations, chosen in part based on resident requests for selective enforcement,
Glenview police officers this month
will monitor the areas for recurring
traffic violations on an as-available
basis. The goal is to promote safe driving in Glenview. Selective enforcement request forms can be found on our website
at www.glenview.il.us.
Radar “hot spots”
Greenwood Road from Glenview Road to East Lake Avenue •
Sherwood Road • Arbor Lane • Winnetka Road from Greenwood to Pfingsten Road • Woodlawn Road from Waukegan
Road to Sunset Ridge Road • Dewes Street from Harlem
Avenue to Shermer Road • Glenview Road from Pfingsten
Road to Milwaukee Avenue • Harrison Street from Waukegan
Road to Shermer Road
Stop sign/traffic light enforcement
Huber Lane/Linneman Street • Winnetka Road/Greenwood
Road • Beech Drive/Sherwood Road • Greenwood Road/
Happy Hollow Road
This month in history
60 years ago – May 2, 1955
Calling Glenview Road a hazard to traffic badly in need
of repairs, the Village Board of Trustees petitioned the
state of Illinois, which then had authority for the roadway, to resurface it.
55 years ago – May 16, 1960
The Village Board of Trustees amended the Municipal
Code to restrict the unauthorized opening of any sewer or
manhole.
30 years ago – May 6, 1985
The Village Board of Trustees imposed a hotel and motel
tax of 5 percent on room rentals.
25 years ago – May 1, 1990
The 911 emergency telephone system was established in
Glenview, with a $1 per month surcharge set per network
connection. The action implemented the referendum
passed in November 1989.
Water meter FAQs from page 1
imately five times a day. Each transmission lasts
no longer than 15 seconds.
From the Village
President
Is this new system safe?
Yes, the power and duration of the radio signal is
too low to pose a health risk. The products that
make up the system are evaluated for safety and
are below levels specified by the Federal Communications Commission.
You know the old saying about there being two
seasons in the Midwest: winter and road construction. Because the window of time to get streets and
roadways reconstructed or repaired is small, the dreaded orange cones go up
and lanes are blocked off as soon as weather permits.
Is my meter data secure?
Yes, only meter consumption readings and meter
identification numbers are transmitted. Personal
customer information is not transmitted.
We’re already well into road construction season in and around Glenview. I
want to extend my thanks for your patience now and over the next several
months – to motorists for being respectful of each other and vigilant about
changing traffic patterns and to residents whose neighborhoods experience
cut-through traffic and noise.
Does the meter interfere with other
electronics?
No, the technology operates as a very lowpowered signal that is regulated by the FCC to
eliminate interference. It will not interfere with
the operation of other electronic services such
as telephone, television, garage door openers,
pacemakers or baby monitors.
Does the transmitter run on my home
electricity?
No, the transmitters run on batteries with a 20year life span.
Do I have to be at my home or business
during the appointment?
Yes, because meters are located inside buildings,
a person 18 years of age or older must be present
throughout the entire appointment.
Who will be replacing my meter?
The Village has contracted with Siemens Industries. Installers will have a marked vehicle, a
Village identification badge and a letter from the
Village. They will not ask for any personal information or for you to pay any money. If you have
concerns whether someone is acting in an official
capacity, please dial 911.
Will I have to sign anything?
The installer will have a form to write down the
new meter’s serial number and final read of the
old meter. You will be asked to sign it before the
installer leaves.
Will I ever receive a bill with an estimated reading again?
The new system will virtually eliminate estimated
readings.
For more information and updates, refer to the
website at glenview.il.us/Page/watermeterreplacement.aspx.
Here’s a summary of the major road projects that are going on:
z The east leg of the intersection of Harms Road and Glenview Road is
closed to traffic until early June. Harms Road north of Glenview to Wilmette Avenue is closed in both directions until mid-September. The closures
are necessary to facilitate the East of Harms Regional Stormwater project,
which will help ease flooding for 1,150 homes in the neighborhood.
z The Illinois Department of Transportation is resurfacing Milwaukee
Avenue from Glenview Road south to south of Touhy Avenue, with mainly
daytime closures. IDOT is also resurfacing Golf Road from west of Potter
Road to Lincoln Avenue, and will have one lane closed in both directions
for the three-mile stretch. Both these resurfacing projects are expected to be
completed by the end of August.
z Additionally, IDOT plans to repair bridge joints on the Union Pacific
Railroad overpass on Milwaukee Avenue north of Glenview Road. Motorists should expect daytime lane closures until the project is completed in
August.
z IDOT is also working to complete the widening of Willow Road from
Waukegan Road to the Edens Expressway, a massive project that began in
2013. Estimated completion is the end of this summer.
A number of websites and blogs have been established to provide updated
information on the progress of these projects:
z A list of Village of Glenview road projects is available at glenview.il.us/
Pages/ConstructionProjects.aspx. Blogs for each project can be accessed
there as well, including IDOT’s Willow Road widening project.
z Construction news releases from the Illinois Department of Transportation can be found online at idot.illinois.gov/about-idot/stay-connected/
news-releases/Construction/releases.
z The Transportation Management Association of Lake Cook provides
overviews of projects being done by IDOT, Cook County Department of
Transportation and Highways, Lake County Division of Transportation and
Illinois Tollway on its website -- tmalakecook.org/tma-highway-construction-meeting.
z If you’re planning to travel outside the Chicago area, another resource is
travelmidwest.com, which displays a map that allows scrolling and zooming
to particular areas of interest.
The investment in our infrastructure requires a great deal of coordination,
effort and time to complete. While it may cause some inconvenience now, the
work will result in storm sewers large enough to help prevent flooding and
miles of improved roadways.
3
Bike Glenview: Good things happen when you pedal
Are you ready to get into gear for National Bike Month? We’re revving up “Bike Glenview” to help.
This community-wide initiative promotes biking as a healthy, cost-effective and low-polluting way
to explore our Village. The campaign is a cooperative effort of the Village of Glenview, Glenview
Natural Resources Commission, Glenview Park District,
Glenview Public Library and Glenview Chamber of
Commerce.
Biking is one of the easiest ways to exercise. It builds strength, muscle tone and
stamina; improves cardiovascular
fitness; and eats up calories.
These
activities can get you
out and pedaling around town:
• StoryWalk Presents – Walk, skip, jog, or better yet, bike along
the path at Little Bear Garden at Gallery Park, 2001 Patriot Boulevard
to read about:
“Yummy Yummy! Food for My Tummy! “ By Sam Lloyd
Two monkeys living on neighboring islands try to find a way to get together
despite the sharks in the water. Through Sunday, May 24
“Pete the Cat and the New Guy” by Kimberly and James Dean
Sunday, June 14 through Sunday, August 2
• Bike to Park Center this month
Ride your bike to Park Center, 2400 Chestnut Avenue, and show your bike helmet to the front
On our collective webdesk staff to receive a free water bottle, Bike Glenview map and sticker. May 1-31
site – bikeglenview.com
• National Bike to School Day (walkbiketoschool.org) – Wednesday, May 6
– are instructive videos
• National Bike to Work Week (bikeleague.org) – May 11-15
on bike basics; a list of
• Get Out & Go Treasure Hunt
2015 “Bike Glenview”
Ride your bike from Gallery Park to Fuller Air Station Prairie and search for clues along the
events; and access to
way. Earn points for answering questions about your discoveries.
our bike trail and green
11 a.m. to 3 p.m. Sunday, June 7. Start at Park Center, 2400 Chestnut Avenue
infrastructure tour maps.
• Children’s Bike Parade
Paper copies and bike
11:15
a.m.
Saturday,
July
4, as part of Glenview’s 4th of July celebration
helmet stickers are avail•
“Bike
Glenview!”
at Farmer’s Market Green Table
able at Glenview Village
Learn about the Bike Glenview initiative and bring an old bike to recycle
Hall, 1225 Waukegan Road;
9 a.m. to noon Saturday, July 25, at Wagner Farm
Glenview Public Library,
• A Bicycle Built for One: Bike History 1818-1930s
1930 Glenview Road; and
Bike historian Carey Williams brings his collection of
Glenview Park District facilities.
antique bikes to the Glenview Public Library,
1930 Glenview Road. 7 p.m. Tuesday,
Pick up a bike-themed book list at the
July 28.
Biking also helps the community’s health, by reducing traffic congestion, air
and noise pollution and
greenhouse gas emissions. Plus, riders get to
places faster.
Glenview Public Library. Bikers can make an
impromptu visit by checking out one of four bike
locks for up to two hours.
We’re out and about
Warmer weather brings more residents outside, so it becomes everyone’s duty to keep
neighborhoods safe, clean and orderly:
z Properly trim back any excessive landscape growth abutting public sidewalks, so
that sidewalks aren’t blocked by bushes, shrubs and trees. Pedestrians – especially
children – should not have to walk in the street.
z Regularly mow and maintain your lawn and public parkways. Weeds and grass
cannot grow taller than eight inches.
z When driving, look out for pedestrians. Slow down and be prepared to stop
when turning or entering a crosswalk. Use added caution to look out for children.
z Be aware that the speed limit on residential streets in Glenview is 20 mph. The
greater the speed, the longer it takes to stop a vehicle by braking, which places
pedestrians at greater risk.
4
We remember
Honor the memory of all who served in wars fought by American forces at the 2015 Memorial Day Parade and Ceremony on
Monday, May 25. This year’s parade begins at 9 a.m. at Depot and Grove streets, heading east to Pine Street, then south to
Glenview Road and east to the Veterans Memorial at River Drive, where the ceremony will take place.
Speakers include Village President Jim Patterson and William Bickley, Commander of Joseph M. Sesterhenn American Legion
Post 166. Also participating are the Glenview Fire Department and Post 166 Color Guards. Post 166 member Allen Andreasen
is this year’s Parade Marshal.
Congratulations to the
CHARACTER COUNTS! in Glenview
2015 Essay Contest winners
Fifth Grade
Seventh Grade
1st Place: Madison Konopka, Wescott School
2nd Place: Patricia Corasis, Willowbrook School
3rd Place: Olivia Trela, Wescott School
1st Place: Maddie Licata, Maple School
2nd Place: Haley Ferrone, Attea Middle School
3rd Place: Katie Katranis, Maple School
Sixth Grade
Eighth Grade
1st Place: Drew Ornduff, Springman Middle School
2nd Place: Gabriela Fuja, Springman Middle School
3rd Place: Matthew Jachtorowycz, Our Lady of Perpetual
Help School
1st Place: Shea Graf, Our Lady of Perpetual Help School
2nd Place: Joshua Yang, Maple School
3rd Place: Adam Alwan, Springman Middle School
The winners were honored at the April 21 Village Board of Trustees meeting. Awards and support were provided by: Northview
Bank & Trust, American Chartered Bank, Glenview Optimists and Image Specialties.
23rd annual Chicago River Day
On Chicago River Day, Saturday, May 9, thousands of volunteers gather for
a day of hands-on environmental work throughout the Chicago River system, working side by side to collect garbage and sort for recycling, remove
invasive vegetation, spruce up river-edge trails and plant native seedlings.
Join the Village of Glenview’s Natural Resources Commission to beautify
the West Fork of the North Branch of the Chicago River by picking up
trash and pulling garlic mustard in and around the Techny Basin. Meet at
the Kohl’s parking lot off Willow Road at 9 a.m. to work through noon Saturday, May 9. Volunteers receive a free T-shirt. Work gloves, tools and trash
bags will be provided. Call (847) 729-2329 for more information.
5
Routing invasive plants starts with vigilance
Our green spaces and backyards are being invaded. The intruders are interloping plant species from other lands that
can cause environmental damage.
During the last several decades, new
plants have appeared which have quickly
become pests. They aggressively crowd
out many native wildflowers and gain
an ecological edge that impacts natural
landscapes, including woodlands, savannas, prairies and wetlands.
Once invasive plants become established, they can grow and spread rapidly,
often because they have no natural
predators in their new environment.
The Village of Glenview’s Natural
Resources Commission has launched
a campaign to try to get these invasive
species under control. Landowners
and residents can assist in the battle by
learning to recognize non-native plants,
eliminate them from the outset and not
plant them or encourage their growth.
Here are just a few of the invasive plants
that can be easily found in the Glenview
area:
Purple loosestrife
– Long a prized perennial because of its
pinkish-purple flowers,
purple loosestrife
grows in dense stands
and seeds are easily
spread. Because it resprouts from root fragments, it is aggressive and can’t be easily
removed by hand. Purple loosestrife
overtakes wetlands and stream beds.
Buckthorn –
This European
species forms
thickets which
are almost impenetrable. It
can be recognized by its fine-toothed, opposite leaves
and dark, berry-like fruits.
Canada thistle – A serious invader
in fields and pastures, Canada thistle
is difficult to eradicate. A small patch
6
can soon turn into
a large colony if left
unchecked. This
robust plant grows
to 5-feet-tall and the
stem and leaves are
covered with prickly
spines.
Phragmites – Also
known as a common
reed, this wetland grass
can grow to 15 feet
in height and create tall, dense stands
that crowd out native
plants.
Teasel – This plant
grows a basal rosette,
then sends up a tall
flowering stalk. A
single teasel plant can
produce over 2,000
seeds that can remain
viable for at least two
years. The tap root
may be more than 2 feet in length.
Garlic mustard –
This noxious plant
spreads through
woodlands and
primarily shaded
urban areas by
seeds. Small white
four-petaled flowers
bloom in spring,
and when a leaf is crushed or the stem
of the plant is broken, a strong onionlike smell is evident. Garlic mustard
takes over parks, yards, nature preserves
and other natural habitats.
The Natural Resources Commission
and the Glenview Park District schedule
restoration work days throughout the
year, where volunteers work to remove
invasive, non-native plants to help
make way for native wildflowers, grasses
and trees along the North Branch of
the Chicago River and in The Grove
National Historic Landmark and Kent
Fuller Air Station Prairie.
But these removal efforts can’t remain
effective if the pest plants are allowed to
May is Illinois
Invasive Species
Awareness Month
V Glenview Television (GVTV) has
produced five short videos each
showing an invasive plant species
and suggested control methods.
Access the videos at: glenview.il.us/
Pages/invasiveplants.aspx
V Attend a discussion on native
and non-native plant species at 7
p.m. Tuesday, May 19, at the Glenview Public Library, 1930 Glenview
Road, featuring Robyn Flakne, the
Village of Glenview’s Natural Resources Manager, and Judy Ksiazek,
the Glenview Park District’s Environmental Education Supervisor.
V Check out the Illinois Invasive
Species Awareness Month website
at invasive.org/Illinois for information on educational events, volunteer activities and other resources.
V Visit these websites for more
information:
z Illinois Audubon Society –
Illinoisaudubon.org
z Illinois Native Plant Society –
Ill-inps.org
z Northeast Illinois Invasive
Plant Partnership – Niipp.net
z Midwest Invasive Plant Network – Mipn.org
thrive on private properties or continue
to be planted by gardeners.
What can you do?
z Learn to identify the different invasive species in the area.
z Plant native species in your garden
and landscaping, which are well
adapted for life in Illinois and will not
require the additional care of many
non-native plants.
z Keep an eye out for invasive species
on your property and neighborhood.
Act to eliminate them before they
become a problem.
Village Board in brief
The Village Board of Trustees met April 7 and 21. Here is a summary of actions taken:
‹ Amended the Glenview Municipal
Code to increase the number of Class
B liquor licenses from 15 to 18; and
authorized execution of a Class B liquor
license for Middy Mags Pizzeria, 1127
Depot St., which allows for the sale of
beer and wine for consumption on the
premises where food is served.
‹ Appointed Neda Brisport to the Appearance Commission.
‹ Approved an ordinance establishing
a “no parking” zone on a portion of Old
Willow Road.
‹ Authorized a bid award to J.A. Johnson Paving Co. of Arlington Heights for
the fiscal year 2015 road resurfacing and
Minor Area Repair Strategy (MARS)
program for $1.27 million.
‹ Authorized a bid award to ALamp
Concrete Contractors Inc. of Schaumburg for the Knight Street/Crown
Lane and Linneman Street water
main replacement projects for a total
$1,427,502. The improvements include
water main, storm sewer and pavement
work.
‹ Authorized a bid award to Sheridan
Plumbing and Sewer Inc. of Bedford
Park for the Wagner Road water main
lining project for $1,403,209. The
improvements include lining and replacing the water mains between Glenview
Road and East Lake Avenue. Construction is expected to start in mid-August.
‹ Authorized extending for one year
the contract with Schroeder & Schroeder Inc. of Skokie for $123,000 for
concrete pavement repair services.
‹ Entered into an agreement to secure
Community Development Block Grant
(CDBG) Disaster Recovery grant funds
to facilitate the East of Harms Regional
Stormwater project and reconstruction
of Harms Road. The project will help
prevent the Main Stem (Middle Fork)
of the North Branch of the Chicago
River from backing up into local Glenview sewers and will allow stormwater
to be pumped from the local storm
sewer system into the river.
‹ Modified the hours for the sale of
beer or wine by a Class J Liquor License
holder to 2-10 p.m. from 4-9 p.m.
‹ Amended the Glenview Municipal
Code to establish a Class F-4 liquor
license classification, which would regulate services of alcoholic beverages in a
movie theater.; and authorized execution of a Class F-4 Liquor License for
Pacific Theatres Exhibition Corp., dba
ArcLight Cinemas, 1850 Tower Drive.
‹ Approved an ordinance for conditional use for Sport Car Chicago at
3031 North Lake Terrace, to allow for
the operation of an automotive sales
use, a B-3 General Service District use,
in an I-2 Light Industrial District.
‹ Authorized execution of a professional service contract with Matrix Design Group Inc. of Colorado Springs for
The Village of Glenview is seeking
interested residents to serve on the
Comprehensive Plan Committee.
This committee will work with
the consultant recently hired by
the Village Board of Trustees and
Village staff to update the Comprehensive Plan – the road map that
guides local development and policy
decisions regarding future growth,
preservation and change in Glenview for the next 10 to 20 years.
Read more about the process online
at glenview.il.us/business/Pages/
Comprehensive-Plan.aspx. An application link is available on that
page.
up to $200,000 to provide planning and
design consultation during the 2016
Comprehensive Plan update.
‹ Established two-hour parking along
Glenview Road between East Railroad
Avenue and Church Street, which
matches other retail parking guidelines
in the downtown area aimed at discouraging Metra commuter parking and
encouraging customer parking turnover.
For more, go online to: glenview.il.us and
click on Government/Board of Trustees/
Meeting Reports.
Electric aggregation price set for a fourth year
Electrical aggregation, permitted by state statute, enables municipalities to seek alternate suppliers of electricity in an effort
to lower electric supply rates for residents. For a fourth year,
the Village of Glenview has entered into a contract with MC
Squared Energy Services for an electric supply rate of 6.880
cents per kilowatt-hour, in effect from June 2015 through
May 2016.
While this is a rate increase from the current third-year price
of 6.719 cents per kilowatt-hour, the new price is projected to
continue to provide savings compared with ComEd’s rates of
about 5 percent.
Residents should have received a letter from the Village of
Glenview and MC Squared that clearly defines the rate for the
coming 12-month period. Residents will not be contacted by
MC Squared via phone or door-to-door sales as part of this
process.
The Village Board of Trustees in November 2012 voted to
join the LakeShore Power Alliance consortium with the village of Wilmette, Northfield and Kenilworth for the electric
aggregation program. Enrollment was automatic if you were a
resident of Glenview in December 2012.
The delivery of electricity is still provided by ComEd. Your
ComEd bill will state MC Squared Services as the supplier.
For more information, go online to glenview.il.us/Pages/
Electric-Aggregation-Program.aspx.
7
1225 Waukegan Road
Glenview, Illinois 60025
Talk to us
CAR-RT-SORT
Permit 177
Presort Standard
US Postage PAID
Glenview, IL
Resolution Center
(847) 724-1700
General information, work order and map
requests, business license payments, trash/
recycling carts, voter registration, pet licenses
Water billing
(847) 724-3112
Village Manager
(847) 904-4370
Todd Hileman
[email protected]
Freedom of Information Act requests,
senior services, block party/special
event permits, GVTV, human resources
Emergency
Police, fire, ambulance
911
Police non-emergency
(847) 729-5000
Fire non-emergency
(847) 724-2141
Commuter parking/permits
****ECRWSS****
Postal Customer
Community Development Department
Capital Projects and
Engineering Divisions
(847) 904-4400
Engineering, road construction
Inspectional Services
Division
(847) 904-4330
Building permits, property maintenance
complaints, private tree inspections
[email protected]
Inspection requests
(847) 904-4320
Planning Division
(847) 904-4340
Planning, new development, zoning
May public meetings
Village Board of Trustees
Jim Patterson, President
Plan Commission
Steve Bucklin, Chair
Appearance Commission
Tim McJilton, Chair
Natural Resources Commission
Henrietta Saunders, Chair
Zoning Board of Appeals
Ron Greco, Chair
7:30 p.m. May 5, 19
7 p.m. May 12, 26
7 p.m. May 13, 27
7 p.m. June 8
7 p.m. May 4, 18
Public Works Department
(847) 657-3030
Snow plowing, water/sewer, street signs and maintenance, public tree concerns, natural resources
Newsletter Editor
Lynne Stiefel
[email protected]
Village President
Jim Patterson
[email protected]
Trustees
Scott Britton
[email protected]
Paul Detlefs
[email protected]
John Hinkamp
[email protected]
Michael Jenny
[email protected]
Debby Karton
[email protected]
Philip O’C White
[email protected]
All meetings are held at Village Hall, 1225 Waukegan Road, unless otherwise noted.
Check meeting status at (847) 904-4370.
(847) 904-4371
This month on
(847) 904-4370
(847) 832-1305
(847) 892-4155
(847) 486-8540
(847) 904-4508
(847) 441-5911
(847) 832-0068
GVTV airs on channel 17 or 6, depending on your neighborhood, or AT&T Uverse channel 99 PEG, and carries Village Board and Plan Commission meetings
live. Unless otherwise noted, coverage of these events will be aired after the event
date.
„ “North Shore Gangs” featuring Northfield Police Chief Bill Lustig – 10:30
a.m. May 5 at North Shore Senior Center.
„ 48th annual Civic Awards – 7 p.m. May 8 at North Shore Country Club
(rescheduled)
„ “Off the Shelf: Steinhart and Sand” – Latest in the series of this original GVTV
program. 2 p.m. May 14.
„ Memorial Day Parade and Ceremony – 9 a.m. May 25 at Veterans Memorial
Plaza, Glenview Road and River Drive.
Programming is subject to change without notice. Check the GVTV schedule at
www.glenview.il.us/government/Pages/GVTV.aspx