APP USERGUIDE
Controls: Jim Bowie, Daniel Boone & Davy Crockett
LEARN HOW TO:
Connect Your
Grill to Your WiFi
Create & Manage
Food Profiles
Control Your Grill Via
Smart Phone
Download by scanning the QR code.
Or search Green Mountain Grills in
iTunes App Store or Google Play.
INDEX
WARNINGS
CONNECT TO GRILL (iOS and
Android)
HOME SCREEN
CONNECTING TO THE GRILL
WARNINGS
2
3
4
5
6
- Grill on/off
- Setting grill temp
- Setting food probe alert
- App stopwatch
- App timer
CREATING PROFILES
- Creating Steps
- Editing profiles
- Starting profiles
- Deleting profiles
SETTINGS SCREEN
LOW FUEL WARNING
Low pellet alarm has been
triggered. Please check hopper.
12
19
- Send Feedback
- Help
- Contact us
- Temperature (°F or °C)
FIRMWARE VERSION CHECK
CONTROL BOARD RESET
UPDATING GRILL FIRMWARE
Connecting to Local WiFi
Multi-Grill Mode
TECH SUPPORT
- App Support
- Grill Support
1
FREE CIRCUIT WARNING
There is an open circuit in your
grill. Unplug from power source
immediately.
20
21
22
27
31
33
MOTOR WARNING
Auger motor is not working
properly. Unplug from power
source immediately.
BATTERY WARNING
Low voltage detected on the Davy
Crockett Grill. Check power source.
FAN WARNING
One of the fans is not working
properly. Discontinue use
immediately.
2
CONNECT VIA iOS
Locating your Grill’s WiFi password.
The password can be found on the back of the digital control of
WiFi retrofit kits, or will be the serial number on the green plate on
the back of the Grill exterior.
Locating your Grill’s WiFi password.
It can be found on the back of the digital control board of
retrofit units, or near the serial number plate on grill exterior.
Go to “Settings > WiFi” on
your iPhone.
Start the app. Wait for the
WiFi pop-up, then press “WiFi
settings.”
Click on WiFi, it’s the second
icon down.
Make sure your WiFi is on.
Make sure your WiFi is on.
When WiFi is enabled, a list of
networks will be displayed.
When WiFi is enabled, a list of
networks will be displayed.
Select the network that
begins with “GMG_”.
Enter the password for your
grill. Press join.
It may take up to 1 minute to
connect. Once connected,
a check mark will appear.
3
CONNECT VIA ANDROID
Press the network that starts
with “GMG_”.
Enter the password for your
grill. Press connect.
It may take up to 1 minute to
connect. Once connected,
“Connected” will appear
below the network.
4
HOME SCREEN
CONNECTING TO THE GRILL
Home Screen The home screen screen
allows you tallows
o keep track of all your grilling track of
The
home
you
to
keep
parameters: all your grilling parameters:
ON: First, confirm the grill is
plugged in and the power
switch on the front of the
grill is set to “on”.
Current Grill Temp.
Current Food Probe
Temp.
Once the grill has power,
ensure your smart phone
connects to the grill’s
WiFi network “GMG_DB_”
Stopwatch Elapsed
Time
Remaining Time for
Timer
With the application
launched press the
“connect” button to
display temps and to
control the grill.
User Set Grill Temp.
Current Profile
Current Step
To disconnect from the
grill press the “connect”
button to disconnect the
App from the grill.
Thecontrol control
screen
allows
toyour turngrill your
grill on/off,
The screen allows you tyou
o turn on/off, set grill set grill
temp., set food pset
robe temp., set a ttemperature,
imer and/or stopwatch.
temperature,
food
probe
set a timer and/or
stopwatch.
5
App Manual | Digital Pellet Smoker 6
GRILL ON/OFF
SETTING GRILL
TEMP
ON: First, make sure you
are connected to the grill.
Once you verify you have
power, turn on the grill by
tapping the “Power” button.
To set the grill temperature
of you GMG make sure you
are connected to the grill.
This will start the grill and
it will begin 1,2,3 startup
sequence.
Press the “Set” button next
to “Grill Temp”.
OFF: Tap the “Power”
button icon to turn the grill
off. The grill will cycle into
“Fan Mode”. This will cooldown the firebox and when
done the grill will display
“Off”.
Move the slider to the
desired temperature you
would like to set.
Press “Confirm”. The Grill will
now adjust to the new set
temperature.
* Pro Tip: double tap to reveal
keyboard screen for precise
temperatures.
7
App Manual | Digital Pellet Smoker 8
FOOD PROBE ALERT
STOPWATCH
Track the internal
temperature of your food
with the GMG Food Probe.
Stop watch adjustments can
only be made on the home
screen.
Set the Food Probe Alert by
clicking on the “set” button
next to “Food Probe”.
Start the stop watch by
pressing the “Play” icon.
To pause the stop watch
press the “pause” icon while
the stop watch is running
Move the Slider to the
desired temperature for you
food probe alert.
To reset the stop watch to
00:00:00, press the “Reset”
icon.
Now press “Confirm” to set
the alert.
The Food probe alert will
now trigger an audible
alarm on the grill when the
set temperature has been
reached. If your device is
connected it will receive an
alert notification as well.
9
The stop watch is display on
the home screen for time
tracking for profile building.
10
TIMER
Timer CREATING PROFILES
To set a timer, press “Set”
To set anext
timer, press “Set” button
to timer.
button next to timer A timer box will pop up.
A Select
timer box will and
pop up. your
hours
Select your hours and minutes.
Tap “confirm”
to set
the timer. Tap “confirm” to minutes. set the timer. Begin the timer by tapping
the “play” icon.
Begin the timer by tapping the “play” icon. To pause press the “Pause”
icon while the timer is
To pause press the running.
“pause” icon while the An audible
alarm will sound
timer is running. when the timer runs out.
An audible alarm will sound when the timer runs out 11 Creating Profiles Creating Profiles App Manual | Digital Pellet Smoker To create a new profile To ctreate a new pProfile press he a“Create rofile” To create
new profile
press t
he “
Create Profile” press the “Create Profile”
button button button.
Select “Profile Name” Select
Name”
to to Select “Profile
“Profile Name” to name our new
new profile. nameyyour
profile.
name your new profile. Press “save” to to confirm Press “save” confirm and save your new pprofile. and save your new rofile.
“Save” to confirm and
Press
save your new profile.
Manual | Digital Pellet Smoker App App Manual | Digital Pellet Smoker 12
CREATING STEPS
Steps Steps allow youCreating to automate
temperature
changes
inyou a profile.
Youtemperature can selectchanges between
Steps allow to automate temperature
time
steps.
throughout a por
rofile. For dependent
instance, if you have a specific way to cook Tri-‐Tip, dependent
you can create steps
a profile to dictated
start at a low Temperature
are
temperature, then ramp up to a higher temp. Once use
the food by
the food probe.
Time
dependent
steps
probe as reached 110°F
time
tohdictate
the
process.
To dd aa nnew
ew step
step press
press To aadd
the ““Add
button.
the Add Step”
Step” Button 13
Time Each step TIMETriggered: TRIGGERED:
Each
step willamaintain
will maintain certain a temperature
foraa
temperature for specified amount of
specified amount of time. time. When the selected
When the run
selected time has
out, thetime has run out, the profile
next step next
step
in the
in will
the profile will activate. activate.
Press““confirm”
save
Press confirm” toto save the new profile step.
the new profile step. Creating Steps TEMP. TRIGGERED:
Using
Temp. Triggered: Using your GMG Food Probe,
your GMG Food Probe, you you can trigger a profile
can trigger a profile step step based on the internal
based on the internal temperature of a food item.
temperature of a food item. When the food probe
reaches the set temperature,
When the food probe the next
step
in the
profile
reaches t
he s
et will activate. (i.e. lower or raise
temperature, the next grill temp when internal
tempstep is
reached.)
in the profile will activate. ( i.e. lower or raise grill temp when internal temp is reached.) Press “confirm”
totsave
the
Press “confirm” o save the new
profile
step.
new profile step. App Manual | Digital Pellet Smoker App Manual | Digital Pellet Smoker 14
CREATING STEPS
Creating Steps 15
EDITING PROFILES
End Step: For For
the “End” END
STEP:
the
“End”step step
the ill aautomatically
utomatically thegrill grillwwill
initiateaa wwarm
initiate arm sSetting
etting oorr Turn
Off/oFan
turn ff/ FMode.
an Mode. Keep
warm:
Setting
willwset
Keep Warm: This setting ill the
grill
temperature
to
150°F
set the grill temperature to and stay there until the grill is
150°F and stay until the grill turned off.
is turned off. Turn off: This mode will
Turn off: This m
ode wFan
ill immediately
initiate
immediately Users arefan Mode. (Noviceinitiate mode. (Novice to
users are Keep
recommended
use the
recommend to use the keep warm Warm setting)
settings.) If your grill goes into fan
If mode
your gand
rill goes fan foodinto is not
mode and food not arrow
ready, ready,
hold
theis “Up”
hold the front
“Up” ofarrow on for
the on the
the grill
approximately
seconds
to5 front of the grill f5or approx., bypass t“Start
Up” Mode.
seconds o bypass Start up mode. App Manual | Digital Pellet Smoker Editing Profiles To edit, tap the desired
profile
edit.
To edit, you
tap wish
the dtoesired profile you wish to edit. Once open, tap the “Edit”
Once open, tap the “Edit” icon.
icon. In Edit Mode, you can:
In Edit Mode, you can: Add a step by tapping the
button.
•“add
Add step”
a step by tapping the “add step” button Remove a step by tapping
“delete”.
• Remove a step by tapping Set
the grill temp, stop time,
“delete”. or desire food probe temp.
thegprofile
to “keep
•Adjust
Set the rill temp, stop time, or warm”
or
“turn
off”
for
desired food probe tthe
emp. end step.
• Adjust the profile to “keep Save
all edits
by tapping
warm” or “turn off” for the theend “Save
Icon”.
step. Save all edits by tapping the “save” Icon. App Manual | Digital Pellet Smoker 16
STARTING PROFILES
Starting Profiles 17
DELETING PROFILES
To begin using the profile you
To begin using a profile you have already created, make
have created, make sure the sure the grill has already run
grill has already run through through the startup process.
the startup process. Once the grill is warm, press
Once rill is w
arm, press “selectthe grill g
profile”
button.
“select grill profile” button Select the profile you would
Select the profile you would like to run.
like to run. Press “Start Profile”.
Press “Start Profile” “Confirm” on the pop up to
complete starting
thepprofile.
“Confirm” on the op up to complete starting the profile Profiles are loaded to the
grill’s memory
and will to the Profiles are loaded continue
to run if a
your
grill’s memory nd phone
will is disconnected.
continue to run if your phone is disconnected App Manual | Digital Pellet Smoker Deleting Profiles To delete aa profile,
profile, tap the To delete
tap
the
“edit” button n the profile “edit” button
inithe
profile
screen.
screen. Next you can press the red
Next you can press the red “Delete” icon to remove the
‘Delete” icon to remove profile.
the profile. To move
around,
To Move profiles
profiles around, hold d
down
next
hold own the
the 33bars
bars next to the profile, then you can
to the profile you want to arrange them up or down
move for a 3 seconds, then your list.
you can move it up or down on your list. Make sure to “confirm” when
Make sure to “confirm” deleting
a profile.
when deleting a profile. App Manual | Digital Pellet Smoker 18
FIRMWARE
VERSION CHECK
SETTINGS SCREEN
Settings Screen 19
About screen link, contact
info,
mission
statement,
and
About screen link, contact app version.
info, missing statement, and App version Call
email
app
support.
Call oror email App support Call or email grill support.
Call or email grill support Change
Temperature
Change Temperature settings settings.
Toggle
app
notifications.
Toggle app notifications WiFi
network
settings.
WiFi network settings Update grill firmware system.
Update grill firmware system App Manual | Digital Pellet Smoker Firmware version check s To Check what version of GMG firmware your grill is running these sGMG
teps. To checkfollow what version
firmware your grill is running
follow these steps.
Toggle the Grill off Hold down the up button, Toggle the grill off.
next toggle the grill on, while continuing o hold Hold down
the up tbutton,
next
toggle
the
grill
on,
while
the “up” button for about continuing to hold the “up”
10 seconds. button
for about 10 seconds.
The LCD
the
version
The LCD will
will flash
flash the number. The newest firmware
version is v4.8 number. The newest firmware is v4.8 If no version number is
displayed, you will need to
If no version number is update your firmware.
displayed, you will need to update your firmware. App Manual | Digital Pellet Smoker 20
UPDATING
GRILL FIRMWARE
CONTROL BOARD RESET
Control board Reset 21
To reset the system to default
settings:
To reset the system to default settings: Toggle the grill off.
Toggle the Grill off Hold down the “Food” Hold down the “Food”
button, ext ttoggle
oggle tthe
he grill
button,nnext
on,owhile
continuing
to hold
grill n, while continuing the
“Food”
about
to hold the “button
Food” for
button 15 seconds.
for about 15 seconds. Theggrill
will
The rill w
ill count
count up
up from 0
to 999, then display off.
from 0 to 999, then The grilloff is now reset to
display default.
The grill is now reset to default. App Manual | Digital Pellet Smoker To update your grill’s firmware you will need Updating rill Firmware to connect
your grillGto
your
home WiFi
network and download the update. Firmware
To update your grill’s firmware you will need to connect your updates and application updates are
grill to your home WiFi network to download the update. separate. You will need to be at least withing
Firmware updates and application updates are separate, and 20 w
feet
of your
network.
Updating
your
you ill need to be ahome
t least w
ithin 20 feet of your Home firmware
necessary
unless
network to ptypically
rocess the disn’t
ownload fully. Most of the you
time you are
experiencing
an issue
thean device.
will only update your controller if ywith
ou have issue. First
make
sure
the grill
First make sure the isgon,
rill and the LCD is displaying
is on, and sure
the you
LCD is not
“off”.
Make
are
cooking
while“off”. you attempt
displaying Make the update.
sure you are not cooking while you attempt the update Next
select
thethe “update
grill”
Next select “update button to being the update
grill” button to being the process.
update process 22
UPDATING
GRILL FIRMWARE
Updating Grill Firmware 23
First sselect
the
network
you
First elect n
etwork y
ou would like to use to update
would like The
to unetwork
se to update your grill.
mustgrill, have
a live
network
your the network must connection.
yournetwork
have a live Internet connection. In the drop down you can
In select
the dany
rop network
down ythe
ou cgrill
an is
in
range
of.
select any networks the grill is in range of. Next nter tthe
he password
password for Nexteenter
for
your
network
and
press
you network and “confirm”. “confirm”. This will begin the
This is will begin the update update
process.
process. Your grill will turn off it’s
Your Grill and
will attempt
turn off toit’s network
connectato
local network.
network nd the
attempt to It
will
then
begin
to
download
connect to the local network the firmware.
to download the firmware. yournetwork
yournetwork
yournetwork
App Manual | Digital Pellet Smoker Next your grill’s LCD panel will display “UPD”
and connect to your local network. Once connected the grill will start downloading the
Next your grill ‘s LCD panel will display “UPD” and connect at this
time
LCD will
to new
your firmware,
local network. Once connected the start
grill wat
ill “00”
start and climbthe ton“100”.
If the update
is successful
downloading ew firmware, at this time LCD will start at theand LCD
panel
will display
“SUC”
“FAL” if tithe LCD “00” climb to “100”. If the update is or
successful failed.
see
toggle
panel will Once
display you
“SUC” or “the
FAL “SUC”,
if it failed. Once the
you sgrill
ee the off then
back
“SUC”, toggle the gon.
rill off then back on. Updating Grill Firmware If your update fails: If 1.
your
update
fails:
You are not close enough to your home network, are
not
close
enough
needs 1. You
to be within 20 feet. to your home network, 2. You needs
be lwithin
feet. of firmware, and the have tothe atest 20
version 2. You have the latest version of firmware, and the package update does not download. package update does not download.
3. Your Network does not have a password or is not 3. Your network does not have a password or is not compatible with the grill. compatible with the grill.
24
UPDATING
GRILL G
FIRMWARE
Updating rill Firmware 25
Connecting to Local WiFi
ter you toggle the grill, the system will install the After you toggle the grill, the system will
date and verify it is installed correctly. You Grill is install the update and verify it is installed
nnected to yYou
our will
local network till at tfrom
he p“000”
hone. You correctly.
see
the grillscount
l see the gduring
rill count 000” tthe
o “100” during this to “100”
thisfrom time.“When
update
me. isWcomplete
hen the uthe
pdate complete the grill will display grillis will
display “OFF”.
It will
disconnect
from
local network
and
. Tthen
he update process is your
completed and the grill will broadcast
the
GMG
network
again.
connect from via
you local network and broadcast the MG network again. CONNECTING TO
LOCAL WiFi
Single Grill Mode: Single Grill
Connect
Connect to Mode:
your grill in “Point toPyour
grill
in theon default
to oint” mode the GMG “Point to Point”
network. Make mode
sure ton
he the
GMG network.
Make
sure and Connect Button is active the Connect Button is active
the app is reading grill and the app is reading grill
temperatures. temperatures.
Navigate o SSettings
ettings tab
and press Navigatetto
the Mthe
ode” button. and“WiFi select
“WiFi
Mode”
button.
The next step is to actually The nexttsteps
willto connect
connect he grill your home you GMG
grill to your home
network.
network.
App Manual | Digital Pellet Smoker 26
CONNECTING TO
LOCAL
Connecting to WiFi
Local WiFi
27
yournetwork
Network1
yournetwork
Android --‐This screen will show The Grill will now connect to your local network
Android
This dialogue
will
display
every inetwork
every network n range inof your using the information provided. The connection
range of your device.
process
approximately
2 minutes
Connecting to Local WiFi to complete,
device. iOS
- You will have to
manually
yourto manually please be patient. During this phase, the grill is
iOS – You type
will inhave The Grill will now onnect to your local network attempting
tocbecome
a client
on theusing network.
network name (case
type in your network name the information provided. The connection process sensitive).
takes about minutes complete, so the
give iapp
t time. Once
the2grill
is into WiFi
Mode,
should
be
During his find
phase the ggrill
rill is on
attempting to become a each
able tto
your
the home
network
Select your
your home
home network Select
network
client n the turn
network. Now that the grill the
is in “GMG
WiFi Network”
(Hidden
timeoyou
it on.
You
will
see
(Hidden and
and unsecured
unsecured networks are not supported
Mode the app sand
hould your
be able to find will
your lose
grill othe
n the WiFi
disappear
device
networks not sbe
upported at
this time.)are Please
within at home network every time you turn it on. You will see connection. Now you just need to connect to the
20
feet
of your
home
this time.) Please be router
within 20 the “GMG Network” isappear and phone
your device will local
network
indyour
local
network
settings.
on
the
feet of initial
your update.
home router on the lose the WiFi connection. Now you just need to connect to tallow
he local network you gminutes
ave the grill hit first update. *Please
the
grill two
toand connect
after
Now that the network is
Connect. llow the grill two minutes to connect turningPitlease on aor
switching
it to
WiFi Mode.
selected enter its password.
after turning it on or switching it to WiFi Mode. Now that the network is Ifyou you
to connect
too
If try ttry
o connect too selected enter its password. early you m
ay get this receive a no
early,
you
may
message, this means that grills
message. This
no grills detected
were found during Now
network
You cthat
an cthe
heck “Show the searching phase. Wait means a grill was not found
at least two minutes after isPassword” selected, enter
the you to verify turning the the
grill ON and try during
searching
phase.
corresponding
password.
again. If you continue to entered it correctly. Please
again,
have issues ptry
lease contact but allow
App S
upport.
additional time for grills to
You can select “Show
Press “Connect”. be found. If you continue to
Password” to display the
difficulty
connecting,
App Manual have
| Digital Pellet Smoker characters
(passwords are
please contact App Support.
case
sensitive).
App Manual | Digital Pellet Smoker 28
CONNECTING TO
Connecting to Local WiFi
LOCAL WiFi
Connecting to Local WiFi
After the grill has connected to the
grill
is iin
Connecting to LAt Now
ocal W
iFi
this that
point the Grill s in Broadcast your home network, connect After the grill has been
your device to home
your home connected
to your
network,
connect
network as wyour
ell aphone
nd press the or tablet to your home
“Connect” button. network
as well and
press This process the
“Connect”
the will show has a few sbutton
teps inand App. This process has several
various windows. steps and will show various
windows.
first
time
you
connect, after
turning
the
first
time
you
turning
the
connections
willconnect
be muchafter
faster
as long
the
grill
on
or
after
switching
it over
grill
on
or
after
switching
it
over
to
a
home
as the grill is left on. to a home
network
for the
first time.
network
for the
first time.
Future
Future connections
will be
much
connections
will be much
faster
as long
as
long
as
the
grill
is
left
on.
as faster
the
grill
is
left
on.
First, it will check for known First, it will check for known
grills. S
ince y
ou h
aven’t Almost there, the grill has been grills. Since you haven’t
We
are
there,
the
grill
almost
detected and the app is attempting connected b
efore i
t w
ill n
ot f
ind connected before, it will not
has
been
detected
and
the
to connect. Almost t
here, t
he g
rill h
as b
een find
any.
In tthe
this this will app
is now
to
any. In he future,
future, detected and attempting
the app is attempting will speed up the process of
connect.
The dialog should disappear and to connect. speed u
p t
he p
rocess o
f connecting.
the text "Connected" should connecting. appear at sthould he bottom of your The dialog disappear and The dialog should disappear
screen, temperature sdhould ata should the text Next the app is going to
and
the"Connected" dialogue will display
be coming in bsottom hortly. of your appear at the “Connected”
at
the
bottom
Next for
the App is glocal
oing to sscreen, earch search
grills
on the
of yourtemperature d
ata s
hould screen, temperature
Now yb
our is coming
connected network,
this o
step
be coming shortly. for grills n twill
he start
local network y in Grill data
should
be
inover local Wthereafter.
iFi. broadcast mode and wait
shortly
sending out a broadcast aNow nd your Grill is connected over for a grill response.
local Congratulations
your grill is
seeing if any grills respond.
WiFi. Broadcast
theis next
mode, so the mode,
next step to switch step
is
to
switch
it
to
“Client
it tthis o Cplient ode, this equires the At oint M
the Grill is irn Broadcast Mode”.
Thisnext step
requires
the
grill to briefly disconnect and mode, so the step is to switch to briefly
disconnect
and
the outer with at he new it reconnect tgrill
o Client Mto ode, trhis requires configuration, wthe
hich router
takes about a reconnect
with
grill to briefly dto
isconnect and This
step only
minute.
a new *Note:
configuration,
reconnect to the router wwhich
ith happens
a new the
first
time
you
connect
after
turning
configuration, which takes about a the
takes around
a minute.
grill on or after switching it over to a home
*Note: This stepThis
only occurs
either
the
happens
minute.
network*Note:
for the first step
time.only
Future
connected
over local WiFi.
29
App Manual | Digital Pellet Smoker App Manual | Digital Pellet Smoker 30
MULTI-GRILL MODE
Multi-‐Grill Mode
31
Multi-‐Grill Mode
When you press Connect in Multi-‐Grill Mode your IfIf you
have
more
thanthan one one you have more App ill search for inall Multi-Grill
grills on your the
local network After
youwpress
Connect
Mode,
GMG
App will
Grill
with
WiFi,
you
can
control
Grill with WiFi, you can and for
allow you to sgrills
elect hich local
to unetwork
se. If you wdisplay
ould search
all available
onwyour
and
each grill separately. You will
control each grill separately. them
in tthe
drop down.
like to switch
grills, just
like o switch grills, If jyou
ust would
disconnect and reconnect need to connect to each
and treconnect
by toggling
the
“Connect”
You will need to connect
connect to disconnect
by toggling he “Connect” button and you will button
be grill
separately
and
and
you
will
be
able
to
choose
which
grill
to
connect
to.
each togyour
rill alocal
nd connect them to able to choose which grill to connect to. them
WiFi
following
the W
steps
Single- the your local iFi in
following Grill Mode. Next, follow these
steps in Single-‐Grill Mode. steps.
Next, follow these steps. Single-Grill
mode connects
immediately
to
the
first
grill
Turn On Multi-‐Grill Mode it finds. By default the App
starts
in Singlemode
Grill mode
Single-Grill
connects
because
it
is
the
most
immediately to the first grill it
Once you have selected Grills are identified by common
configuration.
finds. By default the App is in After
your grill press their are
serial number.
selecting
a grill, press
Grills
identified
by their
Multi-Grill
Mode
extends
Single Grill
mode
because this is“Confirm” to connect.
serial number.
“Confirm” to connect. these
steps aand
littlemost
longer
the fastest
common
than
normal to allow
it to find
configuration.
Multi-Grill
Mode
every
available
on the
performs
everygrill
step
of the
network.
connection process and performs
these steps a little longer than
normal to allow it to find every
grill on the network. App Manual | Digital Pellet Smoker App Manual | Digital Pellet Smoker 32
TECH SUPPORT
APP SUPPORT
CALL: 1.800.603.3398 - Option 15
EMAIL: [email protected]
HOURS: 4pm–7pm MST M-F
GRILL SUPPORT
CALL: 1.800.603.3398 - Option 1
HOURS: 7am–7pm PST M–F, 9am–5pm PST Sat-Sun
CONTACT US:
Green Mountain Grills LLC.
316 California Ave. Suite 1065
Reno, NV 89509
TOLL FREE: 1.800.603.3398
PHONE: 530.347.9167
FAX: 530.347.9710
GreenMountainGrills.com
33
WARNING
READ CAREFULLY
DO NOT OPERATE YOUR GRILL USING THE GMG WIFI APPLICATION
(APP) UNLESS A RESPONSIBLE ADULT IS PRESENT WITH THE GRILL AT
ALL TIMES AND IS AWARE THAT THE GRILL HAS BEEN STARTED.
OPERATION OF THE GRILL REMOTELY WITHOUT THE PRESENCE
AND KNOWLEDGE OF A RESPONSIBLE ADULT COULD RESULT IN
PROPERTY DAMAGE DUE TO FIRE, SERIOUS BODILY INJURY OR EVEN
DEATH.
DO NOT USE THE GRILL WITHIN FIVE (5) FEET OF ANY COMBUSTIBLE
MATERIAL, WHICH INCLUDES WOOD OR TREATED WOOD DECKS,
PATIOS OR PORCHES, OR SIDING.
DO NOT LEAVE INFANTS, CHILDREN OR PETS UNATTENDED NEAR A
HOT GRILL.
NEVER ATTEMPT TO MOVE A HOT GRILL.
DO NOT USE THE GRILL UNLESS ALL PARTS ARE IN PLACE AND IN
WORKING ORDER. THIS INCLUDES THE HEAT SHIELD, THE GREASE
TRAY, AND THE DRIP BUCKET.
THE CHIMNEY CAP MUST BE OPEN AT ALL TIMES WHEN THE GRILL IS
ON.
THE HOPPER LID MUST BE CLOSED AND SEATED PROPERLY AT ALL
TIMES WHEN THE GRILL IS ON.
DO NOT INSTALL THIS MODEL OF GRILL IN ANY BUILT-IN OR SLIDE-IN
CONSTRUCTION, AS USE IN THIS MANNER COULD CAUSE PROPERTY
DAMAGE,SERIOUS BODILY INJURY, OR DEATH.