Samples are available by request through Hirose’s Need-A-Sample program 2688 WESTHILLS COURT, SIMI VALLEY, CA 93065-2635 To: All Hirose Sales Personnel and Partners From: Hirose USA Marketing Dept. Subject: New Product Release for EM30MSD Series April 15, 2015 NEW PRODUCT INTRODUCTION From HIROSE ELECTRIC USA One of the newest products in the industrial power connector line-up from Hirose Electric is the EM30MSD Series. This connector is a manual service disconnect, which works to physically interrupt the circuit and protect operators from high voltage shock accidents. This series provides up to 200A capacity in a compact package. The EM30MSD is designed for use in high-voltage applications in which the current flow must be turned off and on for maintenance, repair, etc. It is equipped with multiple contact points that produce high contact reliability and improved performance under shock and vibration. This series features a safety design with IP2X finger protection, and the signal contacts are configured with an interlocking switch to detect mated status. The EM30MSD series is IP68 water-resistant, RoHS-compliant, and is UL, C-UL, and TÜV pending. The current rating is up to 200 Amps, voltage rating is 1500V AC/DC (power contact), with an operating tempature of -40° C to + 105° C, and it handles up to 50 mating cycles. The EM30MSD Series connector is suitable for use in applications such as high-power battery storage, uninterrupted power supplies, and heavy vehicle construction machinery. A manual service disconnect physically interrupts the electric circuit and protects operators from high voltage shock accidents. Mated Power Line Signal Line Unmated Plug Removal Plug removal physically interrupts the circuit. m 6m 35. 0”) 4 (1. 3”) (4.3 Receptacle side Signal Contact Interlocking Switch m .7m 41 4”) 6 (1. 50mm (1.97”) mm 110 Plug side Signal Contact φ Plug insertion before rotation φ h: m 84m Pitc 1”) (3.3 Rotating towards locking Fully locked By rotating the plug, signal lines are switched ON and OFF. Signal lines are always switched in the “OFF” position prior to the plug removal.This will avoid a hot-swapping condition. Please consult Hirose USA for any questions on part numbers, drawings and other technical information. Christopher Tubbs, Licia Wolf - Hirose Marketing Dept. News Release FOR IMMEDIATE RELEASE April 8, 2015 Editor Contact Information Chris Tubbs, Hirose Electric (805) 306-2052 [email protected] Garth Miller, All Business Marketing (919) 424-0090 [email protected] Developed for industrial applications, the EM12M Series connector offers low contact resistance achieved through multiple contact points… HIROSE LAUNCHES HIGH POWER WIRE-TO-WIRE CONNECTOR SYSTEM THAT SUPPORTS 90 AMPS SIMI VALLEY, CA — April 8, 2015 — Hirose, a leader in the development of innovative connector solutions, has designed a new high power wire-to-wire connector system for industrial and medical applications. The EM12M Series single position, snap-in lock power connector supports up to 90 Amps using 22mm2 cables. A reliable, multi-point contact design delivers low contact resistance and high current carrying capacity. The EM12M Series utilizes mating keys and colored housings to prevent mis-wiring in installations with multiple wire-to-wire connectors. Providing additional safety measures, the EM12M Series meets the IEC 60601 finger test to protect field operators from electrical shock. The EM12M Series features a quick and secure snap-in inertia lock, with an audible click and tactile snap that indicates complete mating. The high power wire-to-wire connector system simplifies assembly, as the receptacle accepts a standard crimp terminal on the receptacle for 38mm2, 22mm2 and 14mm2 wire sizes. The receptacle also accepts a BUS bar connection. The plug can be crimpterminated with a standard crimp tool. “With its circular, multi-contact point design, the EM12M Series high power wire-to-wire connector system minimizes contact resistance to achieve a very high current capability,” said Rick van Weezel, Vice-President of Sales and Marketing for Hirose Electric USA. “The EM12M Series connector is one of the highest current-rated wire to wire connectors in the Hirose product family.” Well suited for a variety of high power applications, the EM12M Series connector systems is currently being used in power controller inverter, robot controller, storage battery, medical equipment, Base Station Transceiver, and UPS applications. The EM12M Series has an operating temperature range of -25˚C to + 105˚C, a contact resistance of 0.5m ohms maximum at 1A, and an insulation resistance of 1000M ohms maximum at 500VDC. The connector has a rated voltage of 600VAC/DC, rated current up to 90A, and a withstanding voltage rating of 3310VAC. The EM12M Series is UL and TÜV certified. For additional information about the EM12M Series connectors, please visit: www.hirose.com/us. ABOUT HIROSE ELECTRIC Hirose Electric Co., Ltd. is a leading global supplier of innovative interconnects, with sales of over $1 billion to customers worldwide. Hirose employs advanced engineering services, superior customer support and worldwide manufacturing capabilities to provide value-based connector solutions for various industries including: industrial, telecommunication, consumer electronics, computer and automotive. More information can be found on Hirose Electric’s corporate website at www.hirose.com/us. EM12M Series Power Connector Features NEW PRODUCT From HIROSE ELECTRIC USA 1.Supports 90 Amps using 22mm² cable 2.Quick and secure snap-in lock mechanism 3.Safety design with finger protection 4.Crimp termination with commercially-available crimp tool 5.Keying and colored housings prevent mis-mating 6. TÜV, UL certified Multi-Point Contacts and Shock Safety Design Finger Safety Feature Multiple contact points lower contact resistance and achieve high current capability. Cross Section View Multiple Contact points Receptacle Female Terminal Finger shock protection provides safe operation for users Male Terminal Plastic Cover Finger Test Secure Connection with Multiple Contact Connection Feature Plug Dimensions and Lock Mechanism Dimensions (mm) Receptacle Plug EM12MR-1SCx (xx) Mated EM12MP-1PCx (xx) Receptacle Pending Unlock Lever Plug 28.4 61 31 Mate 33.5 72.8 42 Snap-in Lock for Safety Operation 68.5 37.9 For Mating Push in the plug. For Unmating Depress unlock lever and pull plug from receptacle. mating prevents incomplete mating. Audible tactile “click” during ” Hirose Electric USA | 2688 Westhills Court | Simi Valley, CA 93065 | T: (805) 522-7958 | www.hirose.com Applications Storage Batteries Power Controller Inverters Base Station Transceivers Medical Equipment Uninterrupted Power Supplies Robotic Controllers Specifications ■ Material and Finish Item Material Finish Housing PBT UL94V-0, Black or Red Terminal Cover PA UL94V-0, Black Contact Spring Copper Alloy Silver plating Contact Copper Alloy Silver plating ■ Performance Characteristics Cross-sectional area of applicable cable Plug Rated Current Receptacle 14 (10.52 to 16.78) mm2 22 (16.78 to 26.66) mm2 22 (16.78 to 26.66) mm2 38 (26.66 to 42.42) mm2 Rated Voltage 600V AC/DC Operating Temperature Range -25° C to +105 ° C Contact Resistance 0.5 mΩ Max. (1 A DC ) Insulation Resistance 1000 MΩ Min. (500 V DC) Withstanding Voltage 3310V AC , 1 minute Mating Cycles 30 times Rated Current 70 Amps 90 Amps ・RoHS compliant Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings or availabilities. Hirose Electric USA | 2688 Westhills Court | Simi Valley, CA 93065 | T: (805) 522-7958 | www.hirose.com 3-2015
© Copyright 2024