MARINEGUARD PROTECTIVE COATINGS SHALILAC SYNTHETIC ENAMEL Top quality high gloss enamel based on synthetic resin vehicle and stable weather resistant pigments. It is designed for both protection and decoration, internally as well as externally, for areas above water. It has good application properties and flow, and it dries in a short duration to give a smooth surface. Product Information Surface Preparation Type Top Quality Alkyd resin based Synthetic Enamel. Finish Smooth & Full glossy Flash Point Above 30˚C Mixing Ratio Base : Accelerator 1 : 1 Volume Solids 34% + / - 1 Recommended primers Metal - Shalimar Red Zinc Chromate Primer. Corresponding wet film thickness 149 - 224 microns per coat Theoretical Spreading Rate Method of Application: Brush / Spraying Airless spray recommended for uniform and high film build. 6.8 – 2.8 Sq.metre per litre Average Spreading - Drying time Surface dry - 4 - 6 hours Hard Dry - 8 - 10 hours approx. microns dft.) There should be no objectionable skinning, colour floatation, considerable medium separation, pigment settling. Thinner: Condition in container Dry Heat Resistance Upto 150˚C (intermittent) Storage life 1 year STEEL SURFACES: The surface to be painted should be dry and free from dust, rust, oil and loose matters. After application of suitable primer two coats have to be applied at an interval of 10 – 12 hours between coats. Application Details 13.6 - 11.3 sq.m/Lt./Coat Capatity (at 25-30 Notes on Airless Spray: 6751 Shalimar Paints Ltd.: 4th Floor, Plot No. 64, Sector-44 Gurgaon -122001, Haryana (India) | P: +91-124-4616600 | F: +91-124-4616659 E: [email protected] | www.shalimarpaints.com DISCLAIMER: The information in this leaflet is given in good faith. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained therein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of result is extended since conditions of use are beyond our control. 1