1. technology and computing
2. consumer electronics
3. tv and video equipment
4. dvrs and set-top boxes

MK Series Augers
MK80
MK100
MK100-36
The Westfield Name
When you make only one product, you get to be very good at
it. For over 60 years, Westfield has developed and refined the
best grain augers available. We’ve learned that farmers want
affordable, simple, straightforward designs for labor saving
performance and dependability. Westfield’s grain augers are
built with the best materials, components and features to
provide value and performance you can count on. This is our
promise and the reason why we’re the industry leader.
Single Cylinder Hydraulic Lift
Lift Assist
Proven Cylinder lift provides smooth, fast
operation with minimal hydraulic requirements.
Combined with the “A” frame undercarriage,
Westfield’s design allows you to position your
auger at the bin with safety and confidence from
your tractor seat.
Multi roller track shoe
reduces the pressure
needed to raise the auger
and provides a lower
transport position.
Undercarriage & Wheels
Heavy structural square tubing and extendable
axles for stability on 81' and 91' models.The
61' and 71' use heavy duty frame material.
Transport wheels are 15" with sturdy 6 bolt
cast iron hubs.
www.grainaugers.com
MK80 & MK100
Trussing
Heavy-duty cable trussing standard on 51',
61', 71' and 81' lengths, providing maximum
support with full bin reach.
91' length uses X-braced top mounted pipe
and heavy-duty side-cable trussing, which
provides maximum support with full bin
reach. Heavy 1/4" angle track adds further
support.
▪Flared lower tube for improved feeding with replaceable 24" flight section
▪MK80 series available in 51', 61' and 71' lengths
▪MK80 capacity: up to 3,900 bu/hr
▪MK100 series available in 36' , 51' , 61' , 71' , 81' and 91' lengths
▪MK100 capacity: up to 6,000 bu/hr
▪“A” frame design for maximum stability
▪Choice of mechanical or hydraulic swing auger drives on 8" and 10" models
▪Equipped with heavy-duty constant velocity (CV) PTO shaft to eliminate
vibrations for smoother running and less stress on the drive train
▪Wear Edge flighting at critical grain transfer points
▪Spring loaded safety discharge door on intake hopper guards against main
auger overloading
▪Trussing provides maximum support with full bin reach
CV-PTO Shaft
All MK augers are equipped with an
overload shear bolt. The CV-PTO shaft,
assures smooth operation with
vibration-free running, longer wear
and constant high capacity grain flow.
Extendable Axles
32" axle extension on 81' and
91' lengths for increased
stability. Retraction offers
reduced width for transport.
Choose from Standard or Low Profile Hoppers
(Low profile not available on 8" models)
Standard
Hopper
Low Profile
Hopper
Quickly switches to right or
left hand operation. A
vertical transport position
provides for quick, easy
cleanout.
Self leveling low profile
hopper available for 10"
and 13" models only.
Safety Discharge
Spring loaded safety
discharge door on the intake
hopper guards against main
auger overloading.
▪ 5" rubber extension – holds more grain while reducing spillage
▪ Handy boot clean out and service access doors
Standard Hopper
Angle Drive
A Westfield designed constant
velocity angle-drive replaces
the u-joint in the redesigned
feed hopper, eliminating
velocity fluctuation vibrations
for smoother running and
less stress on the drive train.
Add These Optional Features
Flex Spouts
CornScreen
Right Angle Drive
Reverser Kit
Directs grain flow – reduces
spillage. Available in poly
plastic or galvanized metal.
Up to 4' long. Available on
all models. Factory installed
on the swing hopper tube.
Assist operation in limited
space situations. Allows a full
arc on opposite side of tractor.
Ability to reverse all
flighting. Allows quick and
easy clean out (shown with
guards removed for clarity).
Power Swing
Get the job done faster with Westfield’s newly designed Power Swing.
Available in 12V Electric or Hydraulic drive, the Power Swing features:
•
•
•
•
Top wind jack to adjust wheel traction
Large lug tires for positive grip
Two wheel drive design
Easy installation
Hydraulic Power Swing
• Hydraulic drive moves swing hopper
• Convenient tube mounted control valve
• Complete with hydraulic hoses
Remote 12V Electric Power Swing
• Heavy-duty 12 volt motor
• Position hopper from cab of truck
• Large “easy grip” remote
• Secondary control on tube if remote is not available
Featuring
MK 100x36 Truck Loader
North America's largest manufacturer of swing away
augers is pleased to introduce an expansion to our
popular MK series lineup.
The MK100x36 combines a 36' main tube length and 9'
swing away hopper to make auger set up a breeze. Just
drive the tractor up to the bin, lower and swing the
hopper into position and you're ready to load your truck
or trailer.
With a 12.5" hopper height (plus rubber extension), the
standard hopper gives plenty of clearance under
horizontal bin unload discharge heads.
For extremely low powerheads, or for re-Ioading
semi trailers in the field, the low-profile version (GLP) is
also available.
Best of all, the MK100x36 offers the capacity, quality
and safety you've come to expect from Westfield.
Flexible positioning
Swing tube on left or right side.
MK AUGER GENERAL SPECIFICATIONS
MK80
51'
MK80
61'
MK100
51'
7 gauge streched and welded
On intake hopper flighting,
initial incline flighting and boot flighting
1.66" x 11 gauge tubing
On intake hopper flighting,
initial incline flighting and boot flighting
2" x 11 gauge tubing
950 psi
1200 psi
1000 psi
14 series with 5/16" shear bolt
PTO Line Drive
40
Track
1200 psi
1400 psi
50
50
60
Double 2 3/4" rollers
Double 2 3/4" rollers
2 1/2" x 2 1/2" x 1/8" wall square tubing
2 1/2" x 2 1/2" x 1/8" wall square tubing
Hubs & Wheels
4 bolt automotive type hubs - 15" wheels
4 bolt automotive type hubs - 15" wheels
Wheel Tread
106"
106"
118"
One 4" cylinder with 5/16" aicraft cable
12'10"
Transport Height
13'6"
*Standard Hopper Height
*Low-Profile
Hopper Height
Approx. Hyd. Fluid
Req’d to raise auger
6.2 Litres/
US Quarts
118"
One 4" cylinder with 5/16" aicraft cable
14'6"
12'10"
15" Automotive Tires
Tires Required
112"
13'6"
One 4 1/2" cyl. with Dual 4" cyl. with
3/8" aircraft cable 5/16" aicraft cable
13'6"
15" Automotive Tires
N/A
10 1/2"
6.2 Litres/
US Quarts
7.5 Litres/
US Quarts
14'6"
11L-15 x 8 ply
12"
9.0 Litres/
US Quarts
2" x 5" x 3/16"
A-frame
Double
3 1/2" x 3 1/2" x
3" x 3" x 3/16"
3/16"
wall
square
tubing,
wall square tubing
arched
Heavy-duty 6 bolt cast iron hubs 15" heavy gauge wheels
112" retracted
176"
14'6"
10 1/2"
7.5 Litres/
US Quarts
Combination
2 1/2" x 11 gauge
steel tubing &
3/8" galvanized cable
Double
2" x 3" x 1/4"
angle iron
Four 3" rollers
3 1/2" x 11 gauge
A-frame
3" x 11 gauge Frame
112"
80-90
3/8" aircraft type
galvinized cable
5/16" aircraft type galvanized cable
3" x 11 gauge Frame
Hydraulic Lift
75
High yield 11 gauge roll formed
Undercarriage
1800 psi
35 series with 5/16" shear bolt
65
High yield 11 gauge roll formed
Track Shoe
MK100
91'
1800 psi
14 series with 5/16" shear bolt
45
5/16" aircraft type galvanized cable
Axle
MK100
81'
10 gauge streched and welded
850 psi
Tube Trussing
MK100
71'
14 gauge welded steel
Main Flighting
HP Required
MK100
61'
14 gauge welded steel
Tubing
Reinforced Flight
(10 ga wear edge)
Flight Shaft
PSI Required to
Raise Auger
MK80
71'
9.0 Litres/
US Quarts
5.0 Litres/
US Quarts
*Hopper height is to top of metal portion (add 4" for the rubber extension).
Note: Capacities may vary according to the commodity and moisture content. Specifications and design are subject to change without notice.
HEIGHT AND REACH SPECIFICATIONS
MK80/100 X 51’
MK80/100 X 61’
MK80/100 X 71’
MK100 X 81’
MK100 X 91’
A
B
C
D
E
F
G
H
I
J
Height
Lowered
Height
Halfway
Height
Raised
Reach
Lowered
Reach
Halfway
Reach
Raised
Height at
Liftarms
Height at
Wheels
Reach to
Liftarms
Reach to
Wheels
10’ 10”
11’ 5”
12’ 6”
11’6”
12’ 6”
23’ 7”
27’ 0”
32’ 8”
33’ 6”
36’ 0”
34’ 8”
40’ 6”
46’ 6”
53’ 9”
59’ 6”
23’ 9”
28’ 10”
33’ 7”
40’ 6”
44’ 8”
22’ 0”
27’ 0”
30’ 9”
36’ 6”
41’ 5”
19’ 6”
23’ 3”
27’ 2”
29’ 6”
34’ 8”
14’ 10”
17’ 0”
20’ 7”
22’ 6”
23’ 3”
19’ 0”
22’ 4”
25’ 10”
25’ 0”
28’ 6”
18’ 5”
22’ 6”
25’ 9”
27’ 0”
31’ 4”
19’ 6”
23’ 3”
26’ 10”
29’ 6“
38’ 4”
SAFETY
FIRST!
We know you work long and hard, especially during
harvest. Please take the time to put safety first:
Box 39, Rosenort, Manitoba, R0G 1W0
Heights measured
from bottom of
auger spout to
ground.
H
C
J
B
I
G
A
F
E
D
Westfield augers are designed with operator safety in mind and incorporate many safety features.
Everyone operating an auger must read and understand the operator's manual and safety decals
before attempting to operate the unit. Do not modify this implement in any way. Use only for
intended purposes. Keep all safety shields in place while operating. Never operate with any safety
shields or guard removed or modified. Never transport the unit in a raised position. Check overhead
before raising. Never attempt to service the auger while it is running. Keep children, pets and
untrained personnel away from work area.
Toll Free: 1-866-467-7207
Web: www.grainaugers.com
Email: [email protected]