MKX Series - JS Woodhouse

MKX 130 Series Augers
.
Steel Trussing
Trussing provides maximum strength
and stability at all heights. Steel trussing
on 84', 94' & 114' units increase tube
rigidity and ensure smooth operation.
Powder Coat Paint
Westfield uses a premium powder
coat on all painted parts for durability
and a great looking finish.
Track
Continuous 1/4" track welded to
tube for increased stability and
structural support.
A-Frame Undercarriage
Heavy-duty A-Frame undercarriage for
stability and long lasting performance
Extendable Axles
• Wide stance for stable operation at the bin
• Adustable axle extensions for reduced
transport width (84', 94' & 114')
www.grainaugers.com
Flight
Connection
Wear Edge
Continuous 10 gauge ribbon
welded to flighting edge
where most of the wear
occurs. Standard on all
MKX 130 Series augers at
critical grain transfer points.
Square one bolt flight
connection provides
improved performance.
Hopper Lift Arm
Can be quickly changed from the
left or right hand side of the auger to
give the operator the convenience of
unloading on both sides.
Sealed Boot Transition
Improves grain flow and increases
capacity while protecting the gear
boxes from rain and corrosion.
Tapered Boot
with Large Clean Out
Maintains maximum capacity when the
auger is raised to its highest position.
Can be easily opened an cleaned out
without tools.
Removable Boot Flight
Removable boot flight with wear edge
to improve performance and durability
of lower flighting.
MKX 130 Swing Hopper with Solid Tires
The 10.5" low profile hopper has all the
performance standards you have come
to expect from Westfield.
Featuring:
• left and right hand flighting
• solid hopper tires
• u-joints with external grease points for
easy service
• hinged chain cover for quick inspection
• 6" one piece rubber extension to prevent
grain splashing
Optional Features
Flex Spouts
Directs grain
flow – reduces
spillage. Available
in poly plastic or
galvanized metal.
Corn Screen
Up to 4' long.
Available on all
models. Factory
installed on the
swing hopper tube.
Right Angle Drive
Assists operation
in limited space
situations. Allows a
full arc on opposite
side of tractor.
Power Swing
Get the job done faster with Westfield’s newly
designed Power Swing. Available in 12V Electric or
Hydraulic drive, the Power Swing features:
• Top wind jack to adjust wheel traction
• Large lug tires for positive grip
• Two wheel drive design
• Easy installation
Remote 12V Electric Power Swing
• Heavy-duty 12 volt motor
• Position hopper from cab of truck
• Large “easy grip” remote
• Secondary control on tube if remote is not available
Hydraulic Power Swing
• Hydraulic drive moves swing hopper
• Convenient tube mounted control valve
• Complete with hydraulic hoses
1000 PTO Drive
Allows operation with
high horsepower
tractors (reverser
included). Required
for 1000 RPM tractors.
Reverser Kit
Ability to reverse all
flighting. Allows quick
and easy clean out
(shown with guards
removed for clarity).
The highest capacity auger ever
made by Westfield.
Introducing the MKX 130 Series, available
in 64' - 114' lengths with capacity up to
11,000 BPH.
The MKX offers over 75 proven
performance enhancements including:
precision engineered auger flighting,
commercial strength frame and trussing
and easier-to-use hopper, guaranteeing
unmatched dependability and
serviceability.
In order to design the best auger we’ve
ever built, we utilized our world-class
manufacturing facility and highly skilled
research and development team. The MKX
130 Series was 12,000 R&D hours and four
years in the making, employing a dedicated
testing centre for auger capacity and
durability testing.
www.grainaugers.com
MKX AUGER GENERAL SPECIFICATIONS
MKX130-64
MKX130-74
MKX130-84
Tubing Gauge
MKX130-94
MKX130-114
12 Gauge
Tube Connectors
Heavy-Duty 1/4" Angle Flange
Main Flighting
11-3/4" OD x 1/4" Stretched & Welded (Wear Edge at Critical Transfer Points)
Reinforced Flight (Wear Edge)
1/4" Main Flighting with Wear Edge on Critical Grain Transfer Points. (Boot Flight: 1/4" plus 10 Gauge Wear Edge = 5/16")
Flighting Shaft
High Strength 3" OD x 11Gauge Tubing Square Flight Connection
Upper Bearing
1-3/4" Pillow Block Greaseable Ball Bearings
Lower Bearing
2" Pillow Block Greaseable Ball Bearings
3/8" Aircraft Type
Galvanized Steel Cable
Tube Trussing
Hydraulic Lift
Combination 3" x 11 Gauge
Steel Tubing & 3/8"
Galvanized Cable
Combination 2-1/2" x 11 Gauge Steel Tubing
& 3/8" Galvanized Cable
Dual 4-1/2" Cylinders with
3/8" Aircraft Cable
Dual 4" Single Acting Cylinders with 5/16" Aircraft Cable
A-Frame Undercarriage
4" x 11 Gauge Frame
3" x 6" HSS Tubing
4" x 8" HSS Tubing
Axle
4" x 4" Square Tubing
Hub
6-Bolt Automotive Type
Tires
16"
PTO Shaft
35R Constant Velocity with 3/8" Shear Bolt
55R Constant Velocity with 2-Bolt Shear
Parking Jack
5000 lb. Side Wind
Sprocket & Chain
Hardened Tooth Sprocket with HD #80 Chain
Low Profile Hopper
60" (l) x 48" (w) x 10-1/2" (h) with Flat Free Tires
PSI Required to Raise Auger
1600 psi
HP Required (w/ Dry Wheat)
100
125
Wheel Tread
124"
130"
Transport Height (14" hitch)
13'2"
14'5"
1800 psi
2000 psi
2100 psi
135-155
145-165
165-185
146"-182"
13'
13'3"
14'5"
HEIGHT, REACH AND WHEEL TREAD SPECIFICATIONS
A
B
C
D
E
F
G
H
I
J
Height
Lowered
Height
Halfway
Height
Raised
Reach
Lowered
Reach
Halfway
Reach
Raised
Height at
Liftarms
Height at
Wheels
Reach to
Liftarms
Reach to
Wheels
MKX130-64
10' 8"
25' 3"
39' 1"
29' 6"
27' 11"
26' 11"
16'
21' 4"
24' 2"
25' 8"
MKX130-74
11' 11"
28' 11"
44' 5"
33' 7"
31' 7"
30' 5"
18' 5"
24' 4"
26' 10"
29' 1"
MKX130-84
10' 2"
35' 4"
58' 1"
42' 9"
38' 4"
32' 2"
23' 6"
31' 9"
27' 10"
32' 10"
MKX130-94
10' 4"
36' 5"
59'
43' 8"
39' 1"
33'5"
24' 10"
31' 4"
30'
37' 3"
MKX130-114
12'2"
40'5"
67'9"
55'
52'4"
45'
27'9"
36'2"
35'4"
45'3"
SAFETY
FIRST!
Height is measured
from bottom of
auger spout to
ground.
C
J
H
B
I
G
A
F
E
D
We know you work long
and hard, especially during
harvest. Please take the
time to put safety first:
Westfield augers are designed with operator safety in mind and
incorporate many safety features. Everyone operating an auger must
read and understand the operator's manual and safety decals before
attempting to operate the unit. Do not modify this implement in any way.
Use only for intended purposes. Keep all safety shields in place while
operating. Never operate with any safety shields or guard removed or
modified. Never transport the unit in a raised position. Check overhead
before raising. Never attempt to service the auger while it is running.
Keep children, pets and untrained personnel away from work area.
Box 39, Rosenort, Manitoba, R0G 1W0
Toll Free: 1-866-467-7207
Web: www.grainaugers.com
Email: [email protected]