. Danfoss Drives A/S Global Course Catalogue 2015 This catalogue displays the eLessons and Learning Bites available on Danfoss Learning. You can register to the courses at your convenience using the Danfoss Learning platform. Advanced Harmonics This eLesson is designed to assist personnel interested in providing sales support or technical assistance for harmonic issues in general. Individual concepts are presented on a page and that page is listed in a table of contents. The student can do the entire presentation or go directly to the area of primary interest. Basic Fieldbus This eLesson is designed for personnel who want to gain basic knowledge about Fieldbus installations. First step in understanding Fieldbus technology. This is a basic introduction to Fieldbus technologies. We will outline fieldbus protocols and standards, Fieldbus options available, application examples and basic selling points. Basic Harmonics This eLesson is designed to provide basic knowledge about harmonic distortion, cause and the solutions. Definition of harmonics: Time Domain/Frequency domain signal analysis Calculation of total harmonic distortion THD Harmonic producing loads Standards and recommendations Harmonic mitigation techniques. Basic MCO This eLesson is designed personnel interested in learning more about motion control functions in relations to VLT AutomationDrive. A basic introduction to MCO covering basic sales and technical information. Includes: product type, hardware, software, product features, typical MCO application system, application examples, benefits and selling points. Frequency Converters Applications This eLesson is designed to provide basic application information on frequency converters. Designed for sales or technical personnel, to introduce basic understanding of drive usage or applications. The course is designed to give the student general application information. Associated courses include detailed information, FC Motors and FC Installations. Frequency Converters Installations This eLesson is designed for sales or technical personnel, to introduce basic understanding of how to properly install drives. The course is designed to give the student general drive / motor information. Associated courses include detailed information, FC Applications and FC Motors. Frequency Converters Introduction This eLesson is designed for sales or technical personnel, to introduce basic understanding of how to properly install drives. The course is designed to give the student general drive / motor information. Associated courses include detailed information, FC Applications and FC Motors. Frequency Converters Motors This eLesson is designed for sales or technical personnel, to introduce basic understanding of drive and motor usage. The course is designed to give the student general drive / motor information. Associated courses include detailed information, FC Applications and FC Installations. Low Harmonic Drive This eLesson is designed for personnel interested in providing sales support or technical assistance for low harmonic drives. Low Harmonic Drives is designed to assist the student with learning about low harmonic drives. Individual concepts are presented on a page and that page is listed in a table of contents. Closed Loop Controls This eLesson is designed for personnel interested in knowing more about Closed Loop Controls. This e-lesson describes the variety of possible feedback and the control algorithm (in popular called PID) inside the VLT® Frequency Converter. The e-lesson is mainly designed with terms from HVAC. PE History This eLesson is designed for personnel interested in learning about the history of Danfoss Power Electronics. This course is about the history of Danfoss Power Electronics. It gives a description of the foundation of Danfoss, how it has expanded and the first products. The course describes the evolution of the VLT drives production and the many variants of VLT products. Smart Logic Controller This eLesson is designed for personnel interested in knowing more about the Smart Logic Controller. Smart Logic Controller SLC is a function build in to most of the drives series from Danfoss. The CLC is a very useful tool of functionality, which gives you a lot of possibilities (further described in the eLesson) In this e-lesson you will learn about the functionality and get instruction in easy programming. Installing for EMC This course will take you through the best practices for installing FCs that are compliant with EMC standards Introduction to EMC This course introduces the concept of electromagnetic compatibility along with its emission, immunity and interference. This course also provides an overview of EMC standards that are applicable Planning for EMC This course takes you through the process of planning an installation to be compliant with EMC standards Introduction to VLT Automation Drive FC360 This elesson will give you an introduction for FC51. It will cover Specification Frame size Input and output terminals User interface Key features Literature Service policy Positioning Industries and applications VLT HVAC Basic FC101 Introduction This elesson will give you an introduction for FC51. It will cover Specification I/O terminals Local control panel Special features Literature Service policy Positioning Industry and applications VLT Micro Drive FC51 Introduction This elesson will give you an introduction for FC51. It will cover - Specification - I/O terminals - LCP - Key features - Literature - Service policy - Positioning - Industry and applications VLT DriveMotor FCm-FCP106 This elesson is to introduce the product specifications and features. It covers the following content: FCP106 Overview FCP106 Enclosure Hard ware Fieldbus EMC MHI FCM and mounting of FCP Wall mount Options Type code Technical literature Service strategy Function release Schedule FC comparison Functional Safety do’s and don’t’s Do's and don't's for Sales and Service Service Training – Disassembling C-Frame How to disassemble VLT C-Frame Safety instructions before you start Please note: we are aware that this elesson contains a minor speak failure - a new version will be published asap. MCT10 – SafePlugin This video will help service technicians, people who work with Danfoss Safety Options and those who want to refresh their knowledge on how to program MCT10. At the end of the video, you will learn about: - How to select the safe plugin How to understand the different page-tabs - Which programming and function can be set? - How to configure/write to the Option - After programming - how will these setting react? - Live demo Danfoss VLT Soft Starters (basic information) Why soft starter - A short description about the different types Control Principles This elesson is to give a general introduction of frequency converter control principles. It includes the following topics: Control structure, PWM principle, Scalar control, Vector control. Motor Types This elesson module is to give a general introduction for different types of motor. It covers Squirrel Cage AC motor, wound rotor AC motor, Permanent Magnet Synchronous motor, Servo Motor, Reluctance Motor, Brushless DC motor. Long Conveyor Belt This elesson is to introduce the basic knowledge of a long conveyor and the danfoss drive solution for long conveyor in mining industry. It covers the following topics: - Basics for long conveyors in mining - Danfoss solution Successful cases sharing & lost project cases - Competitor solutions Basic Introdution to PLC In this course, you will learn Short history of binary key and codes and basic use in PLC. Also you will learn how to do the following:• Describe the milestones in the development of the binary system. • Convert between binary, decimal, and hexadecimal forms. • Explain the difference between a binary code and hits key and binary systems for calculation. • Explain how logic gates are used. This course will take you approximately 45 minutes to complete. Alarms and Warnings The course is designed for sales or technical support person who wants to get a basic overview about Warnings, Alarms and diagnostic information, which the drives display will show/give you Basic Troubleshooting The course is designed to give the student general understanding of troubleshooting, how to start, which tools are useful, and to give the student a basic guideline for troubleshooting in a service case. Basic Programming The course is designed for sales or technical support person who wants to know about the various interface functions, and programming of the (LCP - Local Control Panel) on the drive. Commissioning using SmartStart SmartStart is a new developed Quick meny available in VLT FC series. This elearning is a tutorial for the SmartStart in VLT HVAC-Drive FC102, and giudes you trough the procedures. There is a similar SmartStart function available in VLT AutomationDrive and VLT AQUA Drive Frequency – Learning Bite We all talk about frequency, and sell frequency converters, what are the definitions for frequency: This learning bite explains important characteristic about the term frequency. RMS, Peak and average values – Learning Bite Are you sometime feeling a bit lost in conversation about measuring and data on a AC system? This learning bite gives you a shout definition to the typical used mathematic formulas used for AC voltage and current. Time and frequency domain – Learning Bite Why is visualization in frequency domain some time more easy to handle than time domain? When you analyze a AC power system for harmonics, the frequency domain can give much valuable information. Learn here how and why. Crest factor – Learning Bite Do you want to know more about measurements on AC systems, specially waveform distortion? This learning bite explains about the crest factor, which explains the ratio between the Peak value and the RMS value (Root Mean Square) Power factor – Learning Bite Are you frustrated about the terms: Power factor, cosф, displacement power factor? This learning bite gives you the formulas and definitions normally used.
© Copyright 2024