Repair Mortar LM-1100 Premium Mortar 09/13(1) _____________________________________________________________________________________ Description LeichtMix Repair Mortar LM-1100 is a Single Packed Polymer Modified Cementitious Mortar It is recommended to use for application of vertical and overhead concrete surface, trafficable concrete floor and pavements and as a general purpose repair medium. AREA of Application - Interior & exterior application - Repair of spalled concrete - Filling of joints between overhead precast slabs - Filling of holes or as a general purpose patching mortar TECHNICAL DATA Color Binder Filler Density (wet) Compressive strength Grey Portland cement Lime stone & Graded Sand Approx. 2000 kg/m3 10 N/mm2 ASTM C109:2002 Tensile adhesion strength BS EN 1015-12:2000 Stiffening Time ( min) BS EN1015-9:1999 Flexural strength ASTM C348: Mixing Ratio Thickness of Application Theoretical Coverage >1.0 N/mm2 1.0N/mm2:<300 2.0N/mm2:<400 >3.0 N/mm2 5.0 to 5.6 litre of water per 25 kgs bag Up to 20 mm/coat as needed Approx. 2.7m2/6mm/25kg APPLICATION METHOD Surface Preparation Remove all dust and lose debris from the substrate. Rust of re-bar must be thoroughly clean and treated with anti-rust coating. It is recommended to use LeichtMix Bonding Agent prior applying repair mortar to improve adhesion. Mixing Placed required amount of water in a bucket. Pour the powder while mixing for at least 3 minutes with a mechanical mixer to achieve homogenous and lump free mixture. Placing Apply Repair Mortar onto the damp substrate with trowel or rubber tool. Allow application up to 20mm/coat, and wait a minimum of 2 hrs between coats. Packing & storage Leichtmix Polymer Modified Mortar is supplied in 25 kg bag Storage Shelf life is 6 month if stored in original seal under cool & dry condition. PT Broco Aerated Concrete Industry Jl.Raya Serang KM59 Desa Situterate. Kec. Cikande, Serang 42186 Banten Indonesia. Tel: 0254-406193 Fax: 0254-400137 Cust. Service :0807 1 Broco 8 (0807 1 27626 8) WWW.leichtmix .com a signature of All information contained in this product data sheet are to be used as a guide and reference only, based on laboratory testing and theoretical calculations. It is the duty and responsibility of users to discern and interpret the said information and to make the decision based on his/her intended application and desired effect. We therefore cannot be held responsible for final outcome and performance of product used at site, which differs one from another due to local conditions, methods of applications, and workmanship level. We reserve the right to make changes at any time to said information without prior notice to anyone.
© Copyright 2024