Please down load Program here

Monday, 22 June
Opening
08:30 Invited
Uncertainty quantification in solidification modeling
K Fezi and M J M Krane
Purdue University
09:10
A geometric algorithm for automatic riser determination and shrinkage identification in directionally
solidifying castings
W Warriner and C Monroe
University of Alabama at Birmingham
09:30
Microporosity prediction and validation for Ni-based superalloy castings
J Guo1, C Beckermann2, K Carlson2, D Hirvo3, K Bell4, T Moreland4, J Gu5, J Clews5, S Scott1, G
Couturier1 and D Backman6
1 ESI US R&D, 2 University of Iowa, 3 Alcoa / Howmet, 4 PCC Airfoils, 5 PCC Structurals, 6 Backman Materials
Consulting
09:50
A fast and efficient adaptive parallel ray tracing based model for thermally coupled surface radiation in
casting and heat treatment processes.
J Fainberg and W Schaefer
MAGMA Gießereitechnologie GmbH
10:10
Numerical analysis on the vortex pattern and flux particle dispersion in KR method using MPS method
N Hirata, Y Xu and K Anzai
Tohoku University
COFFEE BREAKE (30min)
11:00
Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity
M Wu, A Kharicha and A Ludwig
University of Leoben
11:20
Multi-scale finite element modeling of solidification structures by a splitting method taking into account
the transport of equiaxed grains
T-T-M Nguyen1, H Combeau2, M Založnik2, M Bellet1 and Ch-A Gandin1
1 MINES ParisTech & CNRS., 2 Ecole des Mines de Nancy
11:40
Transient permeability in macrosegregation of static casting in binary alloys: Use of CDF statistical model
for analysis
I Vušanović
University of Montenegro
12:00
Numerical simulation of multi-mini-pot pouring process of a 13-ton steel ingot
J Li1, H Ge1, B Wang1, M Wu2 and J Li1
1 Shanghai Jiaotong University, 2 University of Leoben
12:20
Effect of liquid volume on the evolution of solidified structure in horizontal centrifugal casting
H Esaka, Y Kataoka and K Shinozuka
National Defense Academy
12:40
Application of a macroscopic model to predict the band segregation induced by shear deformation of
semisolid
S Morita1, H Yasuda1, T Nagira2, C Gourlay3, K Morishita1, M Yoshiya2 and A Sugiyama4
1 Kyoto University, 2 Osaka University, 3 Imperial College, 4 Osaka Sangyo University
LUNCH BREAKE (120min)
15:00
Probability of twin boundary formation associated with the nucleation of equiaxed grains on icosahedral
quasicrystal templates
G Kurtuldu and M Rappaz
1 Ecole Polytechnique Fédérale de Lausanne
15:20
Heterogeneous nucleation of the primary phase in the rapid solidification of Al-4.5wt%Cu alloy droplet
A Maitre1, A-A Bogno1, M Bedel2, G Reinhart2 and H Henein1
1 University of Alberta, 2 Aix Marseille Université & CNRS
15:40
Real-time synchrotron x-ray observations of equiaxed solidification of aluminium alloys and implications
for modelling
A Prasad1, E Liotti2, S D McDonald1, K Nogita1, H Yasuda3, P S Grant2 and D H StJohn1
1 The University of Queensland, 2 University of Oxford, Oxford, 3 Kyoto University
16:00
Prediction of as-cast grain size of inoculated aluminum alloys melt solidified under non-isothermal
conditions
Q Du1 and Y Li2
1 SINTEF Materials and Chemistry, 2 NTNU
16:20
Evolution of the dendritic morphology with the solidification velocity in rapidly solidified Al-4.5wt.%Cu
droplets
M Bedel1, G Reinhart1, Ch-A Gandin2, A-A Bogno3, H Nguyen-Thi1 and H Henein3
1 Aix-Marseille University & CNRS, 2 MINES Paris Tech & CNRS, 3 University of Alberta
COFFEE BREAKE (30min)
17:10
Contactless ultrasonic treatment of melts using EM induction
V Bojarevics, G Djambazov, G S B Lebon and K A Pericleous
University of Greenwich
17:30
The effects of natural, forced and thermoelectric magnetohydrodynamic convection during the
solidification of thin sample alloys
A Kao1, N Shevchenko2, O Roshchupinka2, S Eckert2 and K Pericleous1
1 University of Greenwich, 2 Helmholtz-Zentrum Dresden-Rossendorf
17:50
Modeling of the effect of a thermoelectric magnetic force onto conducting particles immersed in the liquid
metal
Y Du Terrail Couvat1,2, O Budenkova1,2, A Gagnoud1,2, G Salloum Abou Jaoude3,4, H Nguyen-Thi3,4, G
Reinhart3,4, J Wang5, Z-M Ren5 and Y Fautrelle1,2
1 CNRS, SIMAP, 2 SIMAP, Grenoble Institute of Technology, 3 IM2NP, Aix-Marseille and Toulon University, 4
CNRS, IM2NP, 5 Shanghai University, China
18:10
Advanced numerical modeling of the dispersion of ceramic nanoparticles during ultrasonic cavitation
processing and solidification of 6061-based nanocomposites
D Zhang and L Nastac
The University of Alabama
18:30
Effect of electromagnetic brake on decreasing unbalanced flow in mold
Y Miki and K Furumai
JFE steel
Tuesday, 23 June
08:30
Effect of sand dilation on core expansion during steel casting
D Galles and C Beckermann
University of Iowa
08:50
Flow dynamics of green sand in the DISAMATIC moulding process using Discrete element method
(DEM)
E Hovad1,3, P Larsen3, J H Walther1, J Thorborg1,2 and J H Hattel1
1 Danish Technical University (DTU), 2 MAGMA Gießereitechnologie GmbH, 3 DISA Industries A/S
09:10
Combination of microscopic model and VoF-multiphase approach for numerical simulation of nodular
cast iron solidification
E Subasic, C Huang, J Jakumeit and F Hediger
Access e.V.
09:30
Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts
M R Sonne1, J O Frandsen2 and J H Hattel1
1 Technical University of Denmark, 2 Global Castings A/S
09:50
Modelling and simulations of ductile iron solidification-induced variations in mechanical behaviour on
component and microstructural level
J. Olofsson, K. Salomonsson and I. L. Svensson
Jönköping University
10:10
Modeling of damage in ductile cast iron - The effect of including plasticity in the graphite nodules
T Andriollo1, J Thorborg2, N S Tiedje1 and J Hattel1
1 Technical University of Denmark, 2 Magma GmbH
COFFEE BREAKE (30min)
11:00
In-situ observation and modelling of solidification and fluid flow on GTAW process
A Chiocca, F Soulié, F Deschaux-Beaume and C Bordreuil
CNRS & Université Montpellier 2
11:20
Ultra-fast in-situ X-ray studies of evolving columnar dendrites in solidifying steel weld pools
W U Mirihanage1, M Di Michiel2 and R H Mathiesen1
1 Norwegian University of Science and Technology, 2 ESRF - The European Synchrotron
11:40
On the hot cracking susceptibility of a semisolid aluminium 6061 weld: Application of a coupled
solidification-thermomechanical model
H R Zareie Rajani and A B Phillion
1 The University of British Columbia
12:00
Detached melt nucleation during diffusion brazing of a technical Ni-based superalloy: A phase-field study
B Böttger1, M Apel1, B Laux2 and S Piegert2
1 Access e.V. 2 Siemens AG
12:20
A scale adaptive dendritic envelope model of solidification at mesoscopic scales
A Kharicha, M Stefan-Kharicha, A Ludwig and M Wu
University of Leoben
12:40
Evaluation of dendrite morphology using fractal dimension and dimensionless perimeter in
unidirectionally solidified Al-Si alloys
K Ohsasa, Y Natsume, T Sekiya and T Hatayama
Akita University
LUNCH BREAKE (30min)
15:00 Invited
How to solve complex problems in foundry plants - future of casting simulation I Ohnaka
Prof. Emeritus of Osaka University & ie-Solution Corporation
16:20
Integrated computational materials engineering and modelling of shape casting processes - Needs, benefits,
limitations and hurdles
M C Schneider, J C Sturm, W Schaefer, E Hepp and V Gurevich
MAGMA Gießereitechnologie GmbH
16:40
Application of numerical optimization to aluminum alloy wheel casting
J Duan, C Reilly, D M Maijer, S L Cockcroft and A B Phillion
The University of British Columbia
17:00
Integrated modelling of transitions in mechanical conditions during casting and heat treatment
J Thorborg, J Klinkhammer and M Heitzer
MAGMA Gießereitechnologie GmbH
COFFEE BREAKE & Move to Poster Session
Poster Presentations [Foyer of Hall B]
17:30-19:00
P01
Modelling the solidification of ductile cast iron parts with varying wall thickness
M. Bjerre1, N. Tiedje1, J. Thorborg2 and J. Hattel1
1Technical University of Denmark, 2 MAGMA GmbH
P02
Numerical simulation of cast distortion in gas turbine engine components
A A Inozemtsev, A S Dubrovskaya, K A Dongauser and N A Trufanov
Aviadvigatel OJSC
P03
In situ analysis of dendritic growth and fragmentation in solidifying Ga-In alloys
N Shevchenko, O Roshchupkina and S Eckert
Helmholtz-Zentrum Dresden-Rossendorf
P04
Two- and three- dimensional studies of dendritic morphology in magnesium alloy by means of
synchrotron X-ray microtomography and cellular automaton modelling
M Yang, Z Guo and S Xiong
Tsinghua University
P05
Modelling the residual stresses and microstructural evolution in Friction Stir Welding of AA2024-T3
including the Wagner-Kampmann precipitation model
M R Sonne and J H Hattel
Technical University of Denmark
P06
Heat transfer and stress evolution behaviors of an aluminum alloy low pressure shell casting
D Q Zhang, J X Zhou and T Chen
Huazhong University of Science and Technology
P07
Gas-liquid two phase flow modelling of incompressible fluid and experimental validation studies in
vertical centrifugal casting
J X Zhou, X Shen, Y J Yin, Z Guo and H Wang
Huazhong University of Science and Technology
P08
The through process simulation of mold filling, solidification, and heat treatment of the Al alloy bending
beam low-pressure casting
Y Yin, J Zhou, Z Guo, H Wang, D Liao and T Chen
Huazhong University of Science & Technology
P09
Multi-scale simulation of ductile iron casting
J Kubo
CAPCAST INC.
P10
Cellular automaton simulation of ferrite-austenite transformation in low-carbon steels
D An1, S Pan1,2, Q Yu1, C Lin1, T Dai1, B W Krakauer3 and M Zhu1
1 Southeast University, 2 Nanjing University of Science and Technology, 3 AO Smith Corporate Technology
Center
P11
Modeling of microporosity formation during solidification of aluminum alloys
T Wang, D An, Q Zhang, T Dai and M Zhu
Southeast University
P12
Effect of heat treatment on the microstructure and yield strength of a cold-rolled enameling steel
D Peng1, Q Yu1, C Lin1, D An1, T Dai1, B W Krakauer2 and M Zhu1
1 Southeast University, 2 AO Smith Corporate Technology Center
P13
Numerical study of macrosegregation in a large steel ingot with multiple pouring process
Z H Duan, H F Shen and B C Liu
Tsinghua University
P14
Impacts of interface energies and transformation strain from BCC to FCC on Massive-like δ -γ
transformation in steel
M Yoshiya1,2, M Sato1, M Watanabe1, K Nakajima1, T Yokoi1, N Ueshima1, T Nagira1 and H Yasuda1,3
1 Osaka University, 2 Japan Fine Ceramics Center, 3 Kyoto University
P15
Cellular automaton modeling of dendritic growth using a multi-grid method
Y Natsume and K Ohsasa
Akita University
P16
A benchmark for the validation of solidification modelling algorithms
E Kaschnitz1, S Heugenhauser1 and P Schumacher2
1 Österreichisches Gießerei-Institut, 2 Montanuniversität Leoben
P17
FEM stress analysis of the cooling hole of a HPDC die
T Kimura1, H Yamagata1 and S Tanikawa2
1 Gifu University, 2 Kotobuki Kinzoku Kogyo Co., Ltd.
P18
Process-scale modelling of microstructure in direct chill casting of aluminium alloys
M Bedel, L Heyvaert, M Založnik, H Combeau, D Daloz and G Lesoult
Institut Jean Lamour, CNRS & Université de Lorraine
P19
Mechanical simulation of the localized deformation in the aluminum foams:A three-dimensional (3D)
structure based study
Z Kai1, G Enyu1, Z Wenqian1, S Sansan1, J Tao1, H Hongliang3 and X Yanjin3
1 Tsinghua University, 2 Arizona State University, 3 Beijing Aeronautical Manufacturing
P20
In-situ observation of the dynamic of peritectic coupled growth using the binary organic system
TRIS-NPG
J P Mogeritsch and A Ludwig
Montanuniversität Leoben
P21
A numerical benchmark test for continuous casting of steel III
B Šarler 1,2 and R Vertnik1,3
1 Institute of Metals and Technology, Ljubljana, 2 University of Nova Gorica, 3 Štore-Steel d.o.o.
P22
Temperature and Pressure Evolution during Al Alloy Solidification at Different Squeeze Pressures
J Li, H Zhao and Z Chen
South China University of Technology
P23
Modelling of micro- and macrosegregation for industrial multicomponent aluminium alloys
K Ellingsen1, D Mortensen2 and M M'Hamdi1
1 SINTEF Materials and Chemistry, 2 Institute for Energy Technology, Kjeller
P24
Effect of solidified structure on hot tear in Al-Cu alloy
Y Yoshida, H Esaka and K Shinozuka
National Defense Academy
P25
Influence of supercooling on formation of primary phase
R Yoshimura, H Esaka and K Shinozuka
National Defense Academy
P26
Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using
3-phase Eulerian approach
J Hao1, Y J Lin1, Y Nie1, M Wu2 and A Ludwig2
1 University of Nottingham Ningbo, 2 University of Leoben
P27
Phase field study of transient coarsening behavior in two phase systems
J Li, Y Ma, Z Wang and J Wang
Northwestern Polytechnical University
P28
Kinetics of the δ/γ interface in the massive-like transformation in Fe-0.3C-0.6Mn-0.3Si alloys
T Nishimura1, K Morishita1, T Nagira2, M Yoshiya2 and H Yasuda1
1 Kyoto University, 2 Osaka University
P29
GPU-accelerated 3D phase-field simulations of dendrite competitive growth during directional
solidification of binary alloy
S Sakane1, T Takaki1, M Ohno2, T Shimokawabe3 and T Aoki3
1 Kyoto Institute of Technology, 2 Hokkaido University, 3 Tokyo Institute of Technology
P30
SPH based modelling of oxide and oxide film formation in gravity die castings
K Ellingsen1, T Coudert2 and M M'Hamdi1
1 SINTEF Materials and Chemistry, 2 SINTEF Materials and Chemistry
P31
Phase field simulation on microstructure evolution in solidification and aging process of squeeze cast
magnesium alloy
H W Pan , G M Han , Z Q Han and B C Liu
Tsinghua University
P32
Shear band formation of the mushy region in a model of the centrifugal casting process
T Ito1, S Morita1, K Morishita1, T Nagira2, M Yoshiya2, H Yasuda1
1
Kyoto University, 2 Osaka University
P33
In-situ measurement of solute partition coefficients in multi-component alloys by X-ray imaging and EDS
analysis
I Uwabe1, S Yamashita1, K Morishita1, T Nagira2, M Yoshiya2, H Yasuda1
1
Kyoto University, 2 Osaka University
P33
Driving force of the far-equilibrium massive-like transformation following the steel solidification in Fe-C
systems
K Sugimura1, T Nishimura1, K Morishita1, T Nagira2, M Yoshiya2, H Yasuda1
1
Kyoto University, 2 Osaka University
Wednesday, 24 June
08:30 Invited
GPU phase-field lattice Boltzmann simulations of growth and motion of a binary alloy dendrite
T Takaki1, R Rojas1, M Ohno2, T Shimokawabe3 and T Aoki3
1 Kyoto Institute of Technology, 2 Hokkaido University, 3 Tokyo Institute of Technology
09:10
Study of dendritic growth and coarsening using a 3-D phase field model: Implementation of the
Para-AMR algorithm
Z Guo1 and S M Xiong1,2
1 Tsinghua University, 2 Key Laboratory for Advanced Materials Processing Technology
09:30
An adaptive mesh method for phase-field simulation of alloy solidification in three dimensions
P C Bollada, P K Jimack and A M Mullisz
University of Leeds
09:50
Dual-scale phase-field simulation of Mg-Al alloy solidication
A Monas, O Shchyglo, D Höche, M Tegeler and I Steinbach
1 Ruhr University Bochum, 2 Helmholtz-Zentrum Geesthacht
10:10
Atomic investigation of steady-state dendrite tips by using phase-field crystal method
S Tang, J Li, Z Wang and J Wang
Northwestern Polytechnical University
COFFEE BREAKE (30min)
11:00
Deterministic side-branching during thermal dendritic growth
A M Mullis
University of Leeds
11:20
Evolution of specific interface area in dendritic alloy solidification
H Neumann-Heyme1, K Eckert1 and C Beckermann2
1 Technical University Dresden, 2 University of Iowa
11:40
Phase-field modeling of liquid droplet migration in a temperature gradient
S Pan1, M Zhu2 and M Rettenmayr3
1 Nanjing University of Science and Technology, 2 Southeast University, 3 Friedrich Schiller University
12:20
Mesoscopic modeling of columnar solidification and comparisons with phase-field simulations
M Založnik 1, A Viardin2, Y Souhar1, H Combeau1 and M Apel2
1 Institut Jean Lamour, CNRS & Université de Lorraine, 2 Access e.V.
12:40
Microsegregation in multicomponent alloy analysed by quantitative phase-field model
M Ohno1, T Takaki2 and Y Shibuta3
1 Hokkaido University, 2 Kyoto Institute of Technology, 3 The University of Tokyo
LUNCH BOX & EXCURSION
Thursday, 25 June
08:30 Invited
Validating solidification models across the length scales using 4D synchrotron imaging
P Rockett1, S Karagadde1,2, E Guo1, J Bent3, J Hazekamp3, M Kingsley1, J Vila-Comamala4 and P D Lee1
1 The University of Manchester, 2 Indian Institute of Technology Bombay, 3 Unilever R&D, 4 Diamond Light
09:10
Dynamical microstructure formation in 3D directional solidification of transparent model alloys: in situ
characterization in DECLIC Directional Solidification Insert under diffusion transport in
microgravity
N Bergeon1, F L Mota1, L Chen1, D Tourret2, J M Debierre1, R Guérin 1, A Karma2, B Billia1 and R Trivedi3
1 Aix-Marseille Université & CNRS, 2 Northeastern University, 3 Iowa State University
09:30
Localization of shear strain and shear band formation induced by deformation in semi-solid Al-Cu alloys
T Nagira1, S Morita2, H Yasuda2, C M Gourlay3, M Yoshiya1, A Sugiyama4 and K Uesugi5
1 Osaka University, 2 Kyoto University, 3 Imperial College, 4 Osaka Sangyo University, 5 Japan Synchrotron
Radiation Research Institute
09:50
Synchrotron X-ray tomographic quantification of deformation induced strain localisation in semi-solid
Al-15wt.%Cu
B Cai1, S Karagadde1, T J Marrow2, T Connolley3 and P D Lee1
1 University of Manchester, 2 University of Oxford, 3 Diamond Light Source Ltd.
10:10
Observation of dendritic growth under the influence of forced convection
O Roshchupkina, N Shevchenko and S Eckert
Helmholtz-Zentrum Dresden-Rossendorf
COFFEE BREAKE (30min)
11:00
Modeling of percolation of globular-equiaxed grains in Al-Cu alloys
C Mondoux1, H Combeau2, J-L Desbiolles1 and M Rappaz1
1 Ecole Polytechnique Federale de Lausanne, 2 CNRS & Ecole des Mines de Nancy
11:20
Three-dimensional dendritic needle network model with application to Al-Cu directional solidification
experiments
D Tourret1,2, A Karma1, A J Clarke2, P J Gibbs2 and S D Imhoff2
1 Northeastern University, 2 Los Alamos National Laboratory
11:40
Granular cracking during semi-solid indentation of Al-Cu alloy
S Karagadde1,2, B Cai1,2, J L Fife3, M A Azeem1,2, K M Kareh4, C Puncreobutr5, T Connolley6 and P D Lee1,2
1 The University of Manchester, 2 Research Complex at Harwell, 3 Swiss Light Source, Paul Scherrer Institut, 4
Imperial College London, 5 Chulalongkorn University, 6 Diamond Light Source Ltd
12:00
Lamellar eutectic growth with anisotropic interphase boundaries
S Akamatsu1,2 S Bottin-Rousseau1,2, G Faivre1,2, S Ghosh3 and M Plapp3
1 CNRS, 2 Sorbonne Universites-UPMC, Paris 06, 3 Ecole Polytechnique & CNRS
12:20
Eutectic morphology evolution and Sr-modification in Al-Si based alloys studied by 3D phase-field
simulation coupled to Calphad data
J Eiken and M Apel
ACCESS e.V.
12:40
A model for eutectic growth in multicomponent alloys
A V Catalina1, P W Voorhees2, R K Huff1 and A L Genau3
1 Caterpillar Inc., 2 Northwestern University, 3 The University of Alabama at Birmingham
LUNCH BREAKE (120min)
15:00
Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the
transparent alloy Neopentylglycol-(d)Camphor
L Sturz1, M Wu2, G Zimmermann1, A Ludwig2 and M Ahmadein2,3
1 ACCESS e.V., 2 University of Leoben, 3 Tanta University
15:20
Modelling of columnar-to-equiaxed and equiaxed-to-columnar transitions in ingots using a multiphase
model
N Leriche1, H Combeau1, Ch-A Gandin2 and M Založnik 1
1 Université de Lorraine & CNRS, 2 Mines Paris Tech & CNRS
15:40
Conditions for CET in a gamma TiAl alloy
R P Mooney1, J Lapin2, A Klimová2 and S McFadden1
1 Trinity College Dublin, 2 Institute of Materials and Machine Mechanics, Slovak Academy of Sciences
16:00
An efficient 3D stochastic model for predicting the columnar-to-equiaxed transition in alloy 718
L Nastac
The University of Alabama
16:20
Numerical modelling and in-situ radiographic study of the grain nucleation and growth of inoculated
aluminum alloys
Y Li1, Y Xu1, Q Du2, L Arnberg1 and R Mathiesen1
1 NTNU, 2 SINTEF Materials and Chemistry
COFFEE BREAKE (30min)
17:10
Numerical simulation of mold-filling capability for a thin-walled aluminum die casting
L Sun, E Subasic and J Jakumeit
Access e.V.
17:30
Computational prediction of the refinement of oxide agglomerates in a physical conditioning process for
molten aluminium alloy
M Tong1, S C Jagarlapudi, J B Patel2, I C Stone2, Z Fan2 and D J Browne1
1 University College Dublin, 2 Brunel University
17:50
Intensive riser cooling of a turbine blade steel casting after solidification
J W Kang1, X K Hao1, G Nie1, H M Long1, B C Liu1 and C C Zhang2
1 Tsinghua University, 2 Harbin Electric Machinery Co., LTD.
18:10
A numerical study of zone-melting process for the thermoelectric material of Bi2Te3
W C Chen1, Y C Wu1, W S Hwang1, H L Hsieh2, J Y Huang2 and T K Huang2
1. National Cheng Kung University, 2. China Steel Corporation
Friday, 26 June
09:00 Invited
Simulation and validation of two-phase turbulent flow and particle transport in continuous casting of steel
slabs
K Jin1, B G Thomas1, R Liu2, S P Vanka1 and X M Ruan3
1 University of Illinois at Urbana-Champaign, 2 ArcelorMittal Global R&D in East Chicago, 3 Baoshan Iron &
Steel Co., Ltd.
09:40
Study of hot tearing and macrosegregation through ingot bending test and its numerical simulation
T Koshikawa, M Bellet, C A Gandin, H Yamamura and M Bobadilla
1 MINES Paris Tech & CNRS, 2 Nippon Steel & Sumitomo Metal Corporation, 3 The Japan Institute of Metals
and Materials, 4 ArcelorMittal Maizières
10:00
One-way coupling of an advanced CFD multi-physics model to FEA for predicting stress-strain in the
solidifying shell during Continuous Casting of steel
J Svensson1, P E Ramirez Lopez1, P N Jalali1 and M Cervantes2
1 Swerea MEFOS AB, 2 Lulea University of Technology
10:20
Simulations of Macrosegregation with consideration of inclusion effect in solidifying carbon steels
Y F Cao, Y Chen, X H Kang, P X Fu, H W Liu and D Z Li
Institute of Metal Research, Chinese Academy of Sciences
COFFEE BREAKE (30min)
11:10
Modelling of stress fields during LFEM DC casting of aluminium billets by a meshless method
B Mavrič1 and B Šarler1,2
1 Institute of Metals and Technology, Ljubljana, 2 University of Nova Gorica
11:30
Numerical simulation of convection and inclusion distribution during solidification in a heavy steel ingot
R Lin and H F Shen
Tsinghua University
11:50
Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the
sedimented packed bed
A Ludwig, A Vakhrushev, T Holzmann, M Wu and A Kharicha
Montanuniversitaet Leoben
12:10
Closing
LUNCH