'0'1 " JVAC® VITAL-CHECK® IVAC® VITAl-CHECK® MODEL 4400 SERIES PATIENT MONITOR SYSTEM QUICK REFERENCE GUIDE Manual Mode (Multiple Patient Measureme~t Sequence) 1. Press and hold the RECALL MEMORY key while pressing the POWER key. 2. Release the RECALL MEMORY key after two seconds. To Change from OF to °C or To Change from °C to OF 1. Press MENU key 2 times (Parameter Setup). 2. Press UP t arrow (Degrees Menu). 3. Press MENU key again (to change arrow direction), 4. Press UP t or DOWN ,j, arrow (to change degree units) Load Paper (Model 4415 only) To Change from ADULT to NEONATAL Mode or To Change from NEONATAL to ADULT Mode 1. Press MENU key 2 times (Parameter Setup). 2. Press DOWN ,j, arrow 1 time (Mode). 3. Press MENU key again (to change arrow direction). 4. Press UP t or DOWN,j, arrow to switch mode. When to Use the Neonatal Mode: 1. BP cuff selection is based on the size of the patient's extremity. 2. When using any of the Neonatal (white DIVERSAoCUF") BP cuffs sizes 1 - 5 or Infant cuff. 3. You must use the Neonatal BP hose (4 ft., straight) when using any of the neonatal cuffs. 1. Fold or cut paper at a diagonal angle. 2 Open the paper access door and manually feed paper into lower opening on printer (top of instrument). 3. Press FEED key on front panel. When to use the Adult Mode: BP cuff selection is based on the size of the patient's extremity. 2. When using the Child, Small Adult, Adult, Large Adult, or Thigh cuff (both reusable and white DIVERSAoCUF'''). 3. You must use the Adult BP hose (10ft., coiled or straight) when using any of the above cuffs. Improving and Extending the Quality of Human Life™ ALARIS Medical Systems, Inc WORLDWIDE HEADQUARTERS 10221 Watertdge Circle San Diego, California 92121-2772 FAX (S58) 458-7760 Customer Service: (BOO) 482-4822 In Canada call: (SOD) 387-8309 WEBSITE: www.alarismed.com 2001 AlARIS MEDICAL SYSTEMS, INC ALL RIGHTS RESERVED. 5101 VITAL· CHECK® IVAC® VITAL-CHECK® MODEL 4400 SERIES PATIENT MONITOR FOR COMPLETE INSTRUGIONS REFER TO THE IVAC'" VITAL·CHECK® MODEL 4400 SERIES PATIENT MONITOR SYSTEM'S DIREGIONS FOR USE. OPERATOR PRECAUTIONS: To ensure proper operation and use of the IVAC'" Vl'rAL-CHECK'" Patient Monitor System, the user must be thoroughly familiar with the features, setup and programming prior to use. Note: For a complete list of WARNINGS and CAUTIONS refer to the IVAC'" VITAL-CHECK'" Model 4400 Series Patient Monitor System's Directions for Use. IVAC® VITAleCHECI(® MODEL 4400 SERIES PATIENT MONITOR SYSTEM QUICK REFERENCE GUIDE To Set NIBP Automatic Measurements To Print All Stored Vital Signs From Memory (Model 4415 only) (Cycle time does not stay in memory at power off) Press SET NIBP CYCLE key on hont panel. Press key again to set time or use UP t or DOWN ..j, arrow to scroll. To Recall Stored Vital Signs Press RECALL MEMORY key on front panel. Hold PRINT key for two seconds. To Clear Stored Vital Signs From Memory Press POWER to turn monitor OFF. Press POWER while pressing the UP t arrow. (Automatically stored; holds 32 hours of data) Press RECALL MEMORY key on front panel. Press key again or use UP t. or DOWN ..j, arrow to scroll. To Silence Alarms for Two Minutes Press SILEfllCE ALARM key. To Change Alarm limits (All changes stay in memory) 1 Press MENU key. 2 Press DOWN ..j, arrow (Alarrn Menu). 3. Press MENU key. To Silence Alarms Indefinitely Press and hold SILENCE ALARM key for two seconds To Print Vital Signs (Model 4415 only) Press PRINT key while vital signs are displayed on front screen. 4. Use UP Menu). t or DOWN ..j, arrow (to scroll Alarm 5. When selection is made, press MENU key (to change arrow direction) 6. Use UP limit). t, or DOWN ..j, arrow (to change alarm
© Copyright 2024