GPS Interrupter Module

Micha
www.micha.co.uk
The Micha GPS Interrupter is designed to interface directly
with the CPC range of Cathodic Protection Controllers.
GPS Interrupter
Data Sheet 801695
Basic Features and Options:
* GPS Accuracy
By connecting the GPS Interrupter Output to the CPC
Disable Input, the GPS Interrupter avoids the need for
costly and bulky load switches as the CPC output is
switched using the CPC’s own output control.
* Din-rail mounting
The on-board GPS Module receives real time signals from
GPS satellites ensuring synchronisation between multiple
units. Power for the unit is obtained by simply connecting to
the existing expansion port of the CPC unit.
* 10 Programmable Sequences
Up to 10 Programmable Interrupt sequences can be set,
allowing Start and Run Times, Cycle Time and Interrupt
Time to be stored. Programming is done using the 4-button
keypad and 2x16 Alpha-numeric LCD display.
* Internal fitting
Interrupt Times are programmable from 0.1s to 999.8s.
Cycle Times are programmable from 0.2s to 999.9s.
* Low Power
* 55°C Operation
* Non-volatile memory
* ± 3mS accuracy
* LED indication of Power
* LED indication of GPS Status
* LED indication of Interrupt
* Dimensions: 106 x 116 x 58mm
The unit has three LED indicators:
Power, GPS Status (GPS module is receiving accurate time
signals) and Interrupt Active (when the CPC Output is
interrupted).
801695-1
The Micha Design Company Ltd. Aylesbury, HP19 8XN U.K.