505 SIDEBOARD— NICOLA GALLIZIA 2013 1— 7 Completing the 505 system, can be used to create compositions that are raised off the floor by adjustable feet. Offered in two depths (400 and 540), four heights and ten standard widths, the compositions can be given the same finishes and doors that are in the serie. The stylish adjustable foot is available in two finishes: shiny aluminium and black chrome. To enhance compositional potential, a new side panel height of 508-19” has been added, which is equivalent to 1½ modules. DATASHEET REGISTERED DESIGN I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. 505 SIDEBOARD— NICOLA GALLIZIA 2013 MODULARITY Notes Compositions with H 1518 can be created only with a depth of 400 and up to a width of 1918 mm. +28 1 1/8” 1260 1417 1575 1732 1890 2047 2205 2363 2520 2678 49 5/8” 55 3/4” 62” 68 1/4” 74 3/8” 80 5/8” 86 3/4” 93” 99 1/4” 105 3/8” 1518 59 3/4” 2— 7 878 34 5/8” 718 28 1/4” 558 21” 210 8 1/4” +28 1 1/8” Side section Front view 210 8 1/4” DATASHEET REGISTERED DESIGN I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. MODULARITY H 1 1/2 modules 505 SIDEBOARD— NICOLA GALLIZIA 2013 3— 7 H 1 1/2 modules side panel pair of sides for insertion external drawers central partition structural shelf th. 28-1 1/8” back panel support frame and attachment for feet base th 50-1” foot H 2 modules shelf side panel REGISTERED DESIGN structural panel structural shelf th. 28-1 1/8” back panel H 2 modules DATASHEET central partition shelf pair of sides base th 50-1” support frame for insertion and attachment external drawers for feet foot I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. 505 SIDEBOARD— NICOLA GALLIZIA 2013 FINISHES Wood grain Handle Pressure opening th 40 - HORIZONTAL GRAIN for drawers and flap doors - HORIZONTAL AND VERTICAL GRAIN for hinged doors 25 1” Pressure opening th 22 - HORIZONTAL GRAIN for drawers and flap doors - VERTICAL GRAIN for hinged doors type B handle opening th 22 (7/8”) (always horizontally positioned). A hole 64 2 1/2” A 25 1” 100 4” Handle opening th. 22 - HORIZONTAL GRAIN for drawers - VERTICAL GRAIN for hinged doors section A-A finishes: - shiny chrome - black chrome 8 3/8” 22 7/8” 4— 7 finishes matt lacquer colours glossy lacquer colours woods special woods transparent coloured glass glass coloured etched glass shiny black aluminium chrome components structure backs rear finishing panels opening th. 40 (hinged/flap/drawers) doors/external drawers with handle or pressure opening th. 22 / internal drawer units glass doors with shaped profile trim glass tops feet/support frame colours Matt lacquer BC chalk white AV ivory PE pearl DN dune PL platinum PB lead NE black RT venetian red BO bordeaux AT anthracite SE mustard SI silica DO dolomite grey AL clay AR orange MK moka AQ aquamarine CM caramel CZ light blue grey SA sand Glossy lacquer BC chalk white PE pearl DN dune PL platinum PB lead NE black RT venetian red BO bordeaux AT anthracite SE mustard SI silica DO dolomite grey AL clay AR orange MK moka AQ aquamarine CM caramel CZ light blue grey SA sand Woods EU eucalyptus RG grey oak RN black oak Special woods OC light elm OS dark elm Coloured glass BC chalk white PE pearl DN dune PL platinum PB lead NE black RT venetian red BO bordeaux AT anthracite SE mustard SI silica DO dolomite grey AL clay AR orange MK moka AQ aquamarine CM caramel CZ light blue grey SA sand Coloured etched glass BC chalk white PE pearl DN dune PL platinum PB lead NE black RT venetian red BO bordeaux AT anthracite SE mustard SI silica DO dolomite grey AL clay AR orange MK moka AQ aquamarine CM caramel CZ light blue grey SA sand DATASHEET REGISTERED DESIGN I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. 505 SIDEBOARD— NICOLA GALLIZIA 2013 INTERNAL DRAWER UNITS For open compartments and glass hinged doors with shaped profile The internal drawer units can be positioned between two shelves th. 28 mm (1 1/8”) (example A). All drawers are always with pressure opening and always fully extractable. The drawers are flush with the open compartment structure but aligned 18 mm (3/4”) backwards (aligned with internal shelves) if using hinged glass doors. The compartment that holds the internal drawer unit must always have a back panel or a rear finishing panel. The internal drawer unit can be inserted in compositions H 2 and 4 modules, not setting on base. Example A 10 28 3/8” 1 1/8” 5— 7 28 10 525/840 1 1/8” 3/8” cover/standard shelf th. 28 (1 1/8”) 146 th. 22 (7/8”) 146 standard shelf th. 28 (1 1/8”) 5 3/4” 11 1/2” 382/522 15”/ 20 1/2” 20 5/8”/ 33” H 292 364/504 14 3/8”/ 19 7/8” 5 3/4” 601/916 23 5/8”/36” DOORS pressure opening th 40 pressure opening th 22 glass door with shaped profile hinged opening opening with the handle th 22 this handle is not available for external drawers DATASHEET REGISTERED DESIGN I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. 505 SIDEBOARD— NICOLA GALLIZIA 2013 EXTERNAL DRAWERS Standard version comes with partially extractable runners. Fully extractable runners are availables with a surcharge. Notes External drawers can be inserted in compartments with a th 16 mm back panel after installation of the pair of side panels indicated below. * wooden drawers only with horizontal grain Drawers modularity 2 modules H 612 11/2 modules H 430 1 module H 292 side shelf/ structural shelf or 1 drawer H 316 + 1 drawer H 158 or pairs of sides for insertion th. 14 mm 2 drawers H 158 3 drawers H 158 side 1 drawer H 316 + 2 drawers H 158 or 1 drawer H 316 6— 7 2 drawers H 316 side or pairs of sides for insertion th. 14 mm 4 drawers H 158 pairs of sides for insertion th. 14 mm SAMPLE COMPOSITIONS compositions H 568 - 22 3/8” compositions H 568 - 22 3/8” composition 1 W 1288 D 426 composition 2 W 1918 D 566 W 50 3/4” D 16 3/4” W 75 1/2” D 22 1/4” modules 630 - 630 ( ) th 40 - 1 5/8” modules 945 - 472 - 472 ( ) th 40 - 1 5/8” C01 C02 composition 3 W 2548 D 566 composition 4 W 2548 D 566 W 100 3/8” D 22 1/4” W 100 3/8” D 22 1/4” modules 472 - 472 - 945 - 630 modules 630 - 630 - 630 - 630 ( ) th 40 - 1 5/8” C03 C04 DATASHEET REGISTERED DESIGN I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. 505 SIDEBOARD— NICOLA GALLIZIA 2013 SAMPLE COMPOSITIONS compositions H 728 - 28 5/8” 7— 7 compositions H 1528 - 60 1/8” composition 5 W 1918 D 566 composition 6 W 2548 D 426 W 75 1/2” D 22 1/4” W 100 3/8” D 16 3/4” modules 472 - 472 - 472 - 472 modules 630 - 630 - 630 - 630 ( ) th 40 - 1 5/8” C05 C06 composition 7 W 1288 D 426 composition 8 W 1288 D 426 W 50 3/4” D 16 3/4” ( ) th 40 - 1 5/8” W 50 3/4” D 16 3/4” ( ) th 40 - 1 5/8” glass doors with shiny aluminium profile combined flap door opening C07 C08 DATASHEET REGISTERED DESIGN I.2015 molteni.it Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printing. finishes matt lacquer/ open GRAIN lacquer glossy lacquer coloured glass etched coloured glass chalk white ivory pearl silica sand platinum dune clay dolomite grey bordeaux moka orange mustard caramel light blue grey aquamarine venetian red finishes lead anthracite black lessless red only matt lacquer finishes woods marbles gres eucalyptus white carrara marble white gres american walnut calacatta marble anthracite gres grey oak red french marble metal parts black oak emperador dark marble black chrome dark elm carnian grey marble shiny aluminium light elm absolute black granite pewter colour cedar millerighe gliss quick front millerighe gliss quick, gliss 5th structure dwell door frame, track covering profiles chalk white pearl anodised aluminium pearl natural brown aluminium dark cartapaglia gliss quick, gliss walk-in front white Millerighe dark finish available also for Gliss Walk-In where specifically indicated in the pricelist finishes anthracite The finishes shown are indicative and refer to the entire production range. We recommend that you consult the “Colour Range” samples which shown the complete range of finishes, including those not shown here. Molteni&C reserves the right to modify the range without warning.
© Copyright 2024