1. No category

MSEC2015
Track 1: Materials
Symposium 1-1:
Advances in Experiments and Modeling of Micromechanics and
Microstructure Evolution in Manufacturing Processes
Session 1: Experiments and Modeling 1 (Tues., 9:00 – 10:30, Olmstead)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9316 Jingyi Zhao, Guo-Xiang A Cellular Automata Model for Nitriding of
Wang, Yalin Dong,
Nanocrystalline Iron
Chang Ye
MSEC2015-9423 Xiangcheng Kong, Li
Machining Force Modeling Of Vibration-Assisted NanoZhang, Jingyan Dong,
Machining Process
Paul Cohen
MSEC2015-9472 Saurabh Basu, Zhiyu
Crystallographic textures produced during sand blasting
Wang, Christopher
Saldana
Session 2: Experiments and Modeling: Session 2 (Tues., 11:00 – 12:30, Olmstead)
Session Chair(s): TBD
MSEC2015-9318 Yigit Arisoy, Tugrul Ozel Investigations On Machining Induced Microstructural
Changes In Inconel 100
MSEC2015-9320 Zhencheng Ren, Yalin
Molecular Dynamic Simulation Of Surface
Dong, Chang Ye
Amorphization Of Niti Under Dynamic Shock Peening
MSEC2015-9473 Marzyeh Moradi,
Characterization of Deformation Mechanics and
Saurabh Basu,
Microstructure Evolution During Indirect Extrusion In
Meenakshisundaram
Small Length Scales
Shankar
Symposium 1-2: Materials Processing, Microstructure, Plasticity, and Testing
Session 1: (Tues., 2:00 – 3:30, Olmstead)
Session Chair(s): TBD
Paper #
Authors
MSEC2015-9260 Jianchao Yu, Gang
Wang, Jianwei Qin,
Maobing Shuai, Yiming
Rong
MSEC2015-9326 Mohammad Dewan,
Gustavo Gonzalez,
Muhammad Wahab
MSEC2015-9414 THIERRY BARRIERE,
Alexandre Royer, JeanClaude Gelin
Session 2: (Weds., 10:30 – 12:00, Audubon)
Title
Experimental and Physical-based Constitutive Model
Study of FCC Metal over Wide Temperature and Strain
Rate Ranges
Effects Of Rotating - Bending And Torsional Fatigue
Loads On Gas Tungsten Arc (Gta) Welded Aisi 1018 Low
Carbon Steel Joints
Study Of The Degradation Of Polyethylene Glycol In
Inconel 718 Feedstockduring Powder Injection Moulding
Process
1
Session Chair(s): TBD
MSEC2015-9476 Zhiyu Wang,
Subsurface Deformation In Surface Mechanical Attrition
Christopher Saldana,
Processes
Saurabh Basu
MSEC2015-9412 Chetan Nikhare, Ihab
Investigation Of Acoustic Signals During W1 Tool Steel
Ragai, David Loker,
Quenching
Shannon Sweeney,
Chris Conklin, John
Roth
MSEC2015-9440 Timothy Roemer,
Design of a Continuous-Bending-under-Tension Machine
Yannis Korkolis, Brad
and Initial Experiments on AL 6022-T4
Kinsey
Session 3: Ceramic and Metal Matrix Composites (Thurs., 8:30 – 10:00, Burnham)
Session Chair(s): TBD
MSEC2015-9409 Ramasubramanian
Nanocrystalline Diamond Coated Tool Performance In
Kannan, Arunachalam
Machining Of Lm6 Aluminium Alloy/Alumina Mmc
Narayanaperumal, M S
Ramachandra Rao
MSEC2015-9469 Mina Bastwros, Miao
Effects of Reinforcement Particle Size on Cold Roll
Liu, Nicholas Orlowsky, Bonded (CRB) Laminate Composites
Gap-yong Kim
MSEC2015-9359 T. Barriere, T.
Development And Characterization Of Inconel-Based
Tourneroche, J. Gelin,
Mixtures For Metal Injection Molding Applications
M. Sahli
Track 2: Processing
Symposium 2-1: Advances in Abrasive Machining Processes
Session 1: Keynote – Development of Smart Cutting Tools for High Precision Smart Manufacturing
Prof. Kai Cheng
Session 2: Non-traditional abrasive machining (Tues., 9 :00 – 10 :30, Keynes)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9239 Mohammad
Utilizing small external vibrational sources to increase
Mainuddin, Russell
polishing material removal rates
Keanini, Brigid Mullany
MSEC2015-9220 Richard Brocker,
Contact Forces In Unguided Vibratory Finishing
Frederik Vits, Patrick
Mattfeld, Fritz Klocke
MSEC2015-9300 Qiuyan Wang, Zhiqiang Research on Surface Formation Mechanism in Elliptical
Liang, Xibin Wang,
Ultrasonic Assisted Grinding (EUAG) of Monocrystal
Wenxiang Zhao,
Sapphire using Structure Function Fractal Method
Yongbo Wu, Li Jiao,
Tianfeng Zhou
Session 3: Grinding and grinding tools (Weds., 10:30 – 12:00, Burnham)
Session Chair(s): TBD
2
MSEC2015-9280
MSEC2015-9319
MSEC2015-9413
Tatsuya Furuki, Toshiki
Hirogaki, Eiichi
Aoyama, Keiji Ogawa,
Kiyofumi Inaba
Tianyu Yu, Ashraf
Bastawros, Abhijit
Chandra
Markus Weiß,
Sebastian Barth, Fritz
Klocke, Patrick
Mattfeld, Matthias
Rasim
Fabrication Of Electroplated Cbn End-Mill For HighEfficiency Face Milling Of Carbon Fiber Reinforced
Plastic
Modeling Wear Process Of Electroplated CBN Grinding
Wheel
Detailed Analysis And Description Of Grinding Wheel
Topographies
Symposium 2-2: Advances in Assisted / Augmented Manufacturing Processes
Session 1: Assisted Manufacturing Processes 1 (Thurs., 3:30 – 5:00, Audubon)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9445 Satyabrata Mohanty,
Numerical Analysis Of The Effect Of Non Uniform
Kornel Ehmann, Jian
Electric Field On The Trajectory Of Micro Water Jet
Cao
MSEC2015-9465 Durul Ulutan, Abram
Electrically-Assisted Machining of Titanium Alloy Ti-6AlPleta, Laine Mears
4V and Nickel-Based Alloy IN-738: An Investigation
MSEC2015-9366 Hera Wu, Shuting Lei
A Review of Bone Graft Substitutes made from HApolymer Composite Scaffolds and Fabrication Potential
with Laser-based Additive Manufacturing Processes
Session 2: Micro-level Applications in Assisted Manufacturing Processes (Thurs., 8:30 – 10:00,
Olmstead)
Session Chair(s): TBD
MSEC2015-9327 Hossein Mohammadi,
SCRATCH TESTS ON GRANITE USING MICRO-LASER
John Patten
ASSISTED MACHINING TECHNIQUE
MSEC2015-9372 Bryan Chu, Eklavya
Graphene Oxide Colloidal Suspensions As Cutting Fluids
Singh, Johnson Samuel, for Micromachining - Part 1: Fabrication and
Nikhil Koratkar
Performance Evaluation
MSEC2015-9373 Bryan Chu, Johnson
Graphene Oxide Colloidal Suspensions As Cutting Fluids
Samuel
for Micromachining - Part 2: Droplet Dynamics and Film
Formation
Session 3: Assisted Manufacturing Processes 2 (Thurs., 10:30 – 12:00, Welwyn)
Session Chair(s): TBD
MSEC2015-9429 Brandt Ruszkiewicz,
Locally Applied Direct Electric Current's Effect on
David H. Johnson, John Springback of 2024-T3 Aluminum After Single Point
Roth
Incremental Forming
MSEC2015-9446 Justin D. Morrow,
A Hybrid Surface Processing Method Using Surface
Qinghua Wang, Neil
Alloying and Pulsed Laser Micro Melting on S7 Tool Steel
Duffie, Frank
Pfefferkorn
MSEC2015-9435 Jamie D Skovron, Durul Effect Of Thermal Assistance On The Joining Of Al6063
3
Ulutan, Laine Mears,
During Flow Drill Screwdriving
Duane Detwiler, Daniel
Paolini, Boris Baeumler,
Laurence Claus
Symposium 2-3: Advances in Energy Beam Based Surface Modification
Session 1: Laser Surface Processing (Tues., 2:00 – 3:30, Burnham)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9242 John W. Flemmer,
Simultaneous 9-Axis-Laser-Processing
Edgar Willenborg
MSEC2015-9243 John W. Flemmer,
LMDCAM2: Software tool for near-net repair, cladding
Norber Pirch, Fabian
and built-up by laser metal deposition
Drinck
MSEC2015-9272 Panjawat Kongsuwan,
Laser Induced Porosity and Crystallinity Modification of
Grant Brandal, Y
a Bioactive Glass Coating on Titanium Substrates
Lawrence Yao
Symposium 2-4: Advances in Modeling, Analysis, and Simulation of Manufacturing Processes
Session 1: Machining I (Tues., 2:00 – 3:30, Walden)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9201 Alaa A. Olleak, Hassan
Prediction of Cutting Forces in High Speed Machining of
A. El-Hofy
Ti6Al4V using SPH Method
MSEC2015-9249 Demeng Che, Jacob
Finite Element Study of the Cutting Mechanics of the
Smith, Kornel Ehmann
Three Dimensional Rock Turning Process
MSEC2015-9258 Peng Wang, ,Song
Machining Process Planning and Machining Simulation
Zhang, Zhe Li, Jianfeng for Vehicle Rear Bumper Mold
Li
Session 2: Thermal Processing (Thursday, 10:30 – 12:00, Olmstead)
Session Chair(s): TBD
MSEC2015-9250 Alireza Shirazi, Ahmad
Fatigue behaviour of leadfree solder interconnections in
Varvani-Farahani, Hua
life prediction of trilayer structures subjected to thermal
Lu
cycling
MSEC2015-9395 Zhichao (charlie) Li
Heat Treatment Response Of Steel Fatigue Sample
During Vacuum Carburization And High Pressure Gas
Quenching Process
MSEC2015-9455 Yamin Shao, Omar
Prediction of Residual Stress in Multi-Step Orthogonal
Fergani, Torgeir Welo,
Cutting
Steven Liang
Session 3: Machining II (Weds., 8:30 – 10:00, Burnham)
Session Chair(s): TBD
4
MSEC2015-9450
JIANFENG MA,
Comparison of the effects of down milling and up milling
Changqing Qiu, Shuting on the tool temperature in machining of Ti-6Al-4V
Lei
MSEC2015-9358 Sunday, J. Ojolo,
Force Modelling For Temperature Field Determination
Olumuyiwa, Agunsoye, During High Speed End- Milling Of Super Alloys
Oluwole Adesina, M. G.
Sobamowo
MSEC2015-9415 Lei Chen, Juhchin A.
Investigation of Finite Element Thermal Models for
Yang, Albert Shih,
Workpiece Temperature in Cylinder Boring
Bruce L. Tai
Session 4: Forming (Weds., 8:30 – 10:00, Audubon)
Session Chair(s): TBD
MSEC2015-9376 Anupam Agrawal, N
Optimal Blank Shape Prediction Considering Sheet
Venkata Reddy,
Thickness Variation for Multistage Deep Drawing
Prakash M Dixit
MSEC2015-9379 Bishoy Dawood,
Effect of Variable Blank Holder Force on the Springback
Mostafa Shazly,
and Weld-line Movement During Draw bending of Tailor
Abdalla Wifi, ALAA
Welded Blanks
ELMOKADEM
MSEC2015-9499 Feng Zhang, Arif Malik
Strip Flatness Mechanism Analysis In Single-Stand Cold
Mills
Session 5: Machining III (Weds., 3:30 – 5:00, Burnham)
Session Chair(s): TBD
MSEC2015-9284 Gaiyun He, Longzhen
The Prediction of Fixture Comprehensive Influence on
Guo, Wenjie Tian,
the Machining Error of Features Pattern
Xiangsong Zhao
MSEC2015-9315 Vivek Bajpai, Ineon Lee, FE Simulation of Cryogenic Cooled Machining of Ti Alloy
Hyung Wook Park
(Ti6ai4v)
MSEC2015-9401 Xueping Zhang, Rajiv
Role of Tool Flank Wear and Machining Speed in
Shivpuri, Anil
Developing of Residual Streses in Machined Surface
Srivastava
during High Speed Machining of Titanium Alloys
Session 6: System Modeling (Weds., 3:30 – 5:00, Olmstead)
Session Chair(s): TBD
MSEC2015-9240 Jeff Irwin, Pan
A Line Heat Input Model for Additive Manufacturing
Michaleris
MSEC2015-9246 Teng Liu, Weiguo Gao,
Supply Power Design of Oil Cooling Strategies for
Yifan Zhang, Guanwei
Precision Ball Screw Unit
Zhang, Dawei Zhang
SEC2015-9417
Xianguang Kong, Shing A Novel Method Based On Adjusted Sample Entropy For
I Chang, Zheng Zhang
Process Capability Analysis In Complex Manufacturing
Processes
Session 7: Machining IV (Tues., 11:00 – 12:30, Keynes)
Session Chair(s): TBD
MSEC2015-9254 Michael K.O. Ayomoh,
Surface Roughness Prediction using Numerical Scheme
Khaled A. Abou-Eland Feedback Control
Hossein, Sameh F.M.
Ghobashi
5
MSEC2015-9276
Fawang Zhang, Lin Gu,
Study of The Gaussian Distribution of Heat Flux for
Wansheng Zhao,
Micro-EDM
MSEC2015-9310 faping ZHANG, jibin
Surface Morphology Separation Based On Wavelet
YANG, tiguang ZHANG, Reconstruction and Empirical Mode Decomposition
yan YAN
Session 8: Nano-Scale Modeling (Thurs., 8:30 – 10:00, Welwyn)
Session Chair(s): TBD
MSEC2015-9282 Jhonatam Cordeiro,
Process Parameter Studies of Molecular Dynamics
Salil Desai
Models to Control Substrate Wettability
MSEC2015-9460 Rapeepan Promyoo,
Nanoindentation Models with Realistic AFM Tip
Hazim El-Mounayri,
Geometries
Kody Varahramyan
Symposium 2-5: Advances in Nontraditional Manufacturing Processes
Session 1: Advances in Nontraditional Manufacturing Processes-1 (Tues., 2:00 – 3:30, Keynes)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9275 Zengwei Zhu,
Process simulation of electrochemical machining of
Dengyong Wang, Jun
convexity structure on revolving workpiece
Bao, Di Zhu
MSEC2015-9294 Sadaiah Mudigonda,
Investigations on Surface Texturing on Monel 400 using
Deepakkumar Patil
Photochemical Machining
MSEC2015-9456 Baoyang Jiang, Shuhuai On Modeling and Simulation of the Discharging Activity
Lan, Jun Ni
in Electrochemical Discharge Machining
Session 2: Advances in Nontraditional Manufacturing Processes-2 (Weds., 8:30 – 10:00, Olmstead)
Session Chair(s): TBD
MSEC2015-9261 Xufan Yan, Song Zhang, Electrochemical corrosion resistance of AISI H13 steel
Jianfeng Li, Gaoqi
machined by electro discharge machining
Wang
MSEC2015-9311 Tianfeng Zhou, Lizheng Analysis of Shaped Electrode Based on Size Effects in
Ma, Siqin Pang,
Electrical Discharge Machining (EDM)
Zhiqiang Liang, Xibin
Wang
MSEC2015-9348 Arvind Pattabhiraman, Atomized Dielectric Spray-Based Electric Discharge
Deepak Marla, Shiv
Machining (Spray-Edm) For Sustainable Manufacturing
Kapoor
Session 3: Advances in Nontraditional Manufacturing Processes-3 (Weds., 10:30 – 12:00, Olmstead)
Session Chair(s): TBD
MSEC2015-9227 Weilong (Ben) Cong,
Rotary ultrasonic machining of CFRP: Design of
Fuda Ning
Experiment with a Cutting Force Model
MSEC2015-9259 Sehijpal Singh
Investigations Into The Removal Of EDM Recast Layer
Khangura, Harinder
With Magnetic Abrasive Machining
Singh, Lakhvir Singh
Sran, Anil Srivastava
MSEC2015-9391 P K S C Fernando,
Rotary Ultrasonic Machining of Carbon Fiber Reinforced
Zhijian Pei, Weilong
Plastics: Design of Experiment
6
(Ben) Cong, Meng
Zhang, Xiaoxu Song
Session 4: Advances in Nontraditional Manufacturing Processes-4 (Weds., 1:30 – 3:00, Olmstead)
Session Chair(s): TBD
MSEC2015-9233 Jisoo Kim, Hyung Wook The Large Pulsed Electron Beam (Lpeb)-Assisted Hybrid
Park
Deburring Process Of The Patterned Metal Masks
MSEC2015-9301 Jipeng Chen, Lin Gu,
Research on the Machining Performance of SiC/Al
Hui Xu, Wansheng Zhao Composites Utilizing the BEAM Process
MSEC2015-9497 Shiv Shailendar, Murali Corrosion Study On Liquid Marble Based Localized
Sundaram
Electrochemical Deposition On Cold Rolled Steel
Symposium 2-6: Advances in Processing of Polymers and Polymer-Based Composites
Session 1: Processing and Testing of Polymer and Composites – I (Tues., 9:00 – 10:30, Lakeview)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9223 Haibin Zhao, Xiangfang The Effect Of Nanoclay On The Rheological Properties Of
Peng
Polylactic Acid (Pla)/Polyhydroxybutyrate-Valerate
(Phbv) Blends
MSEC2015-9342 Risa Yoshizaki, Kim Tae Mechanical Properties Of Densified Untwisted Carbon
Sung, Atsushi Hosoi,
Nanotube Yarn / Epoxy Composites
Hiroyuki Kawada
MSEC2015-9411 Felicia Stan, Laurentiu
Investigation on the Effect of Carbon Nanotubes
I. Sandu, Catalin
Concentration on the Electrical and Rheological
Fetecau
Properties of PP/MWCNTs Composites
Session 2: Processing and Testing of Polymer and Composites – II (Tues., 11:00 – 12:30, Lakeview)
Session Chair(s): TBD
MSEC2015-9236 Catalin Fetecau, Felicia Tuning the Mechanical Properties of High-Density
Stan, Laurentiu I.
Polyethylene by ECAE Process
Sandu, Florin Susac
MSEC2015-9289 Fabrizio Quadrini,
Shape Memory Composite Hands For Space Applications
Giovanni Matteo
Tedde, Loredana Santo
MSEC2015-9364 Dave (Dae-wook) Kim,
Effect of Tool Wear on Hole Quality in Drilling of Carbon
Aaron Beal, Patrick
Fiber Reinforced Plastic-Titanium Stacks Using Tungsten
Kwon
Carbide and PCD Tools
Session 3: Advance in Manufacturing of Polymers and Composites (Tues., 2:00 – 3:30, Lakeview)
Session Chair(s): TBD
MSEC2015-9313 Loredana Santo,
Manufacturing Of A Shape Memory Polymer Actuator
Fabrizio Quadrini,
Giovanni Matteo Tedde
NAMRC43-62
W. Li, B. Belmont, A.
Design and Manufacture of Polyvinyl Chloride (PVC)
Shih
Tissue Mimicking Material for Needle Insertion
7
Symposium 2-7: Challenges and Innovations in Additive Manufacturing
Session 1: Additive Manufacturing Keynote (Tues., 2:00 – 3:30, Salon III)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9533
Suresh Babu
Opportunities and Challenges of Metal Additive
Manufacturing: Role of High-Performance Computing
and Ex-situ/In-situ Characterization Tools
Session 2: Panel Discussion – State of the Art, Challenges, and Research Need to Further Additive
Manufacturing
(Weds., 1:30 – 3:00, Salon II)
Session Chair(s): Y. Kevin Chou
Mr. Bryan Dods
GE Power and Water – Manufacturing Chief Engineer
Mr. Rajeev Kulkarni
3D Systems – VP Global Engineering
Dr. Rob Ivester
DOE
Dr. Shawn Moylan
NIST
Dr. Suresh Babu
Univ. of Tennessee Knoxville
Dr. Yong Chen
Univ. of Southern California
Session 3: Metal Additive Manufacturing I (Tues., 9:00 – 10:30, Salon III)
Session Chair(s): TBD
MSEC2015-9244
Jarred Heigel, Pan
The impact of Argon shielding flow rate on Laser
Michaleris
Engineered Net Shaping (LENS) of Ti-6Al-4V
MSEC2015-9317
Xibing Gong,
Characterization of Microstructure and Mechanical
Xiaoqing Wang,
Property of Inconel 718 from Selective Laser Melting
Zachary Jones,
Kenneth Cooper,
Vernon Cole, Y.
Kevin Chou
MSEC2015-9321
Luis Criales, Yigit
A Sensitivity Analysis Study On The Material Properties
Arisoy, Tugrul Ozel And Process Parameters For Selective Laser Melting Of
Inconel 625
Session 4: Novel Material Extrusion Processes (Thurs., 1:30 – 3:00, Audubon)
Session Chair(s): TBD
MSEC2015-9396
Emmett Hull,
Effects of Process Variables on Extrusion of Carbon Fiber
Weston Grove,
Reinforced ABS Filament for Additive Manufacturing
Meng Zhang,
Xiaoxu Song,
Zhijian Pei, Weilong
(Ben) Cong
MSEC2015-9436
Weilong (Ben)
Additive Manufacturing of CFRP Composites using Fused
Cong, Fuda Ning,
Deposition Modeling: Effects of Carbon Fiber Content
Junhua Wei, Shiren and Length
Wang, Meng Zhang
MSEC2015-9462
Roland Chen, Terris Nano-CT Characterization of Structural Voids and Air
Lo, Lei Chen, Albert Bubbles in Fused Deposition Modeling for Additive
Shih
Manufacturing
Session 5: Design Aspects in Additive Manufacturing I (Thurs., 8:30 – 10:00, Salon II)
8
Session Chair(s): TBD
MSEC2015-9439
Shaw Feng, Paul
Witherell, Gaurav
Ameta, Duck Bong
Kim
MSEC2015-9448
Rajit Ranjan, Rutuja
Samant, Sam
Anand
MSEC2015-9459
Dongping Deng,
Yong Chen
Fundamental Requirements for Data Representations in
Laser-based Powder Bed Fusion
Design For Manufacturability In Additive Manufacturing
Using A Graph Based Approach
4D Printing: Design and Fabrication of 3D Shell
Structures with Curved Surfaces Using Controlled SelfFolding
Session 6: Electrohydrodynamic Jet Printing (Thurs., 10:30 – 12:00, Salon II)
Session Chair(s): TBD
MSEC2015-9403
Lai Yu Leo Tse, Kira Airflow Assisted Electrohydrodynamic Jet Printing: An
Barton
Advanced Micro-additive Manufacturing Technique
MSEC2015-9487
Yuan-Shin Lee,
Electrohydrodynamic Jet Printing of Silver Seeds: Micro
Jingyan Dong,
Scale Patterning by Electroless Copper Deposition
Hantang Qin
Session 7: Metal Additive Manufacturing II (Tues., 11:00 – 12:30, Salon III)
Session Chair(s): TBD
MSEC2015-9322
Xiaoqing Wang,
Review On Laser-Based Additive Manufacturing Of
Xibing Gong, Y.
Inconel 718
Kevin Chou
MSEC2015-9477
Bo Cheng, Y. Kevin Deformation Evaluation of Part Overhang Configurations
Chou
in Electron Beam Additive Manufacturing
MSEC2015-9392
Ardeshir Raihanian Impact of Additive Manufacturing Adoption on Future of
Mashhadi, Behzad
Supply Chains
Esmaeilian, Sara
Behdad
Symposium 2-8: Green Energy Manufacturing
Session 1: Renewable Energy Manufacturing (Wednesday, 3:30 – 5:00, Walden)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9340 Xiaoxu Song, Meng
Ultrasonic-assisted dilute acid pretreatment of poplar
Zhang, Zhijian Pei,
wood biomass for biofuel manufacturing: A preliminary
Donghai Wang
study
MSEC2015-9444 Changwei Liang,
Design, Fabrication, Simulation and Testing of a Novel
Junxiao Ai, Lei Zuo
Ocean Wave Energy Converter
MSEC2015-9449 Xuewei Yang, Wenqiao Development and challenge of micro-biofuel cell for
Yuan
medical application
Session 2: Energy efficiency (Thurs., 8:30 – 10:00, Lakeview)
Session Chair(s): TBD
MSEC2015-9278 Fadwa Dababneh,
Simulation-Based Electricity Demand Response For
Mariya Atanasov, Zeyi
Combined Manufacturing And Hvac System Towards
Sun, Lin Li
Sustainability
9
MSEC2015-9355
MSEC2015-9387
Symposium 2-9:
Amin Mirkouei, Karl R.
Haapala
Paul Mativenga,
Norshah Shuaib
A Network Model to Optimize Upstream and Midstream
Biomass-To-Bioenergy Supply Chain Costs
Energy intensity and quality of recyclate in composite
recycling
Innovations in Equipment Design, Tooling, and Control/Automation to
Enhance Manufacturing Processes
Session 1: Equipment Design & Tooling to Enhance Manufacturing Processes (Weds., 3:30 – 5:00,
Salon I)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9332 Fujun Wang, Cunman
Mechanism And Characteristics Of A Piezoelectric
Liang, Yanling Tian,
Actuated Wire Clamp For Thermosonic Wire Bonding
Xingyu Zhao, Dawei
Zhang, Placid Ferreira
MSEC2015-9333 Jun Zhao, xianhua tian, Development of Si3N4/(W, Ti)C/Co graded nanofeng gong, wemzhen
composite ceramic tools and its performance in turning
qin, qingzhong xu
GH2132 alloy
MSEC2015-9430 Brandt Ruszkiewicz,
Feasibility of End Mill Cooling Using the Venturi Effect
Zachary C Reese, John
with Compressed Air
Roth
Session 2: Equipment Design & Tooling to Enhance Manufacturing Processes (Thurs., 3:30 – 5:00,
Salon IV)
Session Chair(s): TBD
MSEC2015-9335 Anhai Li, Jun Zhao,
Wear Mechanism Analysis of Coated Carbide Tools in
Fenghua Lin
High-Speed Milling of Ti-6Al-4V alloy via Cross-Section
Characterization of Worn Cutting Edge
MSEC2015-9361 LVRSV Prasad
Experimental Investigations to Evaluate the
Chilamkurti, Naga
Performance of Alternate Striped Coated Carbide Inserts
Lakshmi Pavani
in Turning of AISI 1040 Steel
Puvvada, Ramji Koona,
Venkata Ramana
Swarna
NAMRC43-31
Paul Anderson, John
Subscale Machining of Large Components
Ziegert
Symposium 2-10: Innovations in Joining and Assembly Processes
Session 1: Welding Session #1 (Wednesday, 10:30 – 12:00, Walden)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9248 Yunwu Ma, Yongbing
Modeling of Friction Self-Piercing Riveting (F-SPR) of
Li, Wei Hu, Ming Lou,
Aluminum to Magnesium
Zhongqin Lin
MSEC2015-9431 Grant Kruger, Scott
Robustness of 802.15 Wireless Interface for Real-Time
10
Miller, Albert Shih,
Thermal Feedback Control of the Friction Stir Welding
Theo van Niekerk
Process
MSEC2015-9457 Xun Liu, Shuhuai Lan,
Study of plunge stage for a hybrid friction stir welding
Xianli Qiao, Jun Ni
process based on electro-plastic effect
Session 2: Welding Session #2 (Wednesday, 1:30 – 3:00, Walden)
Session Chair(s): TBD
MSEC2015-9251 Hongze Wang, Yansong Modelling of heat affected zone softening in laser
Zhang
welding of M1500
MSEC2015-9262 S. Shawn Lee, Tae
Analysis Of Weld Formation In Multilayer Ultrasonic
Hyung Kim, S. Jack Hu,
Metal Welding Using High-Speed Images
Wayne Cai, Jeffrey A.
Abell
MSEC2015-9370 Hao Du, S. Jack Hu, Pei- Estimation Of Weld Bead Geometry In Gas Metal Arc
chung Wang, Jingjing Li Welding Of Aluminum Using Electrical Signals And Liquid
Surface Mode
Session 3: Assembly (Weds., 1:30 – 3:30, Audubon)
Session Chair(s): TBD
MSEC2015-9292 Changhui Liu, Sun Jin,
The Assembly Variation Modeling for the Rear Casing
Xinmin Lai, Jie Luo, Bo
Wax Part Based on Polar Coordinate
He, Fei Li,
MSEC2015-9210 Wei Xu, Alexander
Multiphysics modeling and simulation of
Mamutov, Dangxin Wu, electromagnetic pulse welding
Xin Sun, John Bonnen,
Quochung Le, Sergey
Golovashchenko
Symposium 2-11: Innovations in Materials Forming Processes
Session 1: Formability of Metals- Keynote paper (Tues., 2:00 – 3:30, Salon II)
Paper #
Authors
Title
MSEC2015-9213 Dorel BANABIC
Advances in Plastic Anisotropy and Forming Limits in
Sheet Metal Forming
Session 2: Forming with Polymers (Tues., 9:00 – 10:30, Salon II)
Session Chair(s): TBD
MSEC2015-9206 Sven Hildering, Markus Tool Load Sensitivity Against Multidimensional Process
Michalski, Ulf Engel,
Influences in Microblanking of Thin Metal Foils With
Marion Merklein
Silicon Punches
MSEC2015-9212 Lorenzo Iorio, Matteo
Development of a Die Compensation Algorithm for
Strano, Michele Monno Sheet Metal Stamping with Deformable Tools
MSEC2015-9263 Mohammad A.
Effect of Incremental Depth and part shape on failure
Davarpanah, Rajiv
modes in Single Point Incremental Forming of polymers
Malhotra
Session 3: Incremental Forming I (Tues., 11:00 – 12:30, Salon II)
Session Chair(s): TBD
11
MSEC2015-9404
Rakesh Lingam,
Compensations For Tool Path To Enhance Accuracy
Anirban Bhattacharya,
During Double Sided Incremental Forming
Javed Asghar, N
Venkata Reddy
MSEC2015-9437 Brandt Ruszkiewicz,
Incrementally Formed Stiffeners Effect on the Reduction
Sean S Dodds, Zachary
of Springback in 2024-T3 Aluminum After Single Point
C Reese, John Roth,
Incremental Forming
Ihab Ragai
MSEC2015-9471 Rakesh Lingam, I. V. M. Importance of Feature Sequencing in Incremental
Kishan, C L
Forming
Harikrishnan, N
Venkata Reddy
Session 4: Incremental Forming II (Weds., 3:30 – 5:00, Audubon)
Session Chair(s): TBD
MSEC2015-9406 Goran Grzancic,
Basic Investigations in Incremental Profile Forming
Christoph Becker,
Nooman Ben Khalifa, A.
Erman Tekkaya
MSEC2015-9408 Huaqing Ren, Newell
Effects of Tool Positions in Accumulated Double-Sided
Moser, Zixuan Zhang,
Incremental Forming on Part Geometry
Ebot Ndip-Agbor, Jacob
Smith, Kornel Ehmann,
Jian Cao
MSEC2015-9438 Zachary C Reese,
Step Down Size, IO Versus OI Forming, and Final Part
Brandt Ruszkiewicz,
Geometry's Effect on Springback of 2024-T3 Aluminum
John Roth, Chetan
During Single Point Incremental Forming
Nikhare
Session 5: Forming and Joining of Hollow Parts (Weds., 8:30-10:00, Keynes)
Session Chair(s): TBD
MSEC2015-9204 Frank Schieck, Dirk
Hot Gas Forming for Advanced Tubular Automobile
Landgrebe
Components - Opportunities and Challenges
MSEC2015-9442 Ali Nassiri, Greg Chini,
Arbitrary Lagrangian Eulerian FEA Method to Predict
Brad Kinsey
Wavy Pattern and Weldability Window during Magnetic
Pulsed Welding
MSEC2015-9496 James Lowrie, Gracious Novel Extrusion Punch Design For Improved Lubrication
Ngaile
And Punch Ejection
Session 6: Innovations in Materials Forming (Weds., 10:30-12:00, Keynes)
Session Chair(s): TBD
MSEC2015-9237 Hua-Chu Shih
Galling And Die Build-Up In Forming Uncoated, ColdRolled High -Trength Steels (Ahss)
MSEC2015-9283 Arshpreet Singh,
Experimental Investigation on Elastic Spring Back in
Anupam Agrawal
Deformation Machining Bending Mode
MSEC2015-9467 Saeed Mousa, GapDirect Adhesion of Warm Roll-Bonded
yong Kim
Al1100/Polyurethane/Al1100 Sandwich Composite
12
Symposium 2-12:
Substitution and enhancement of traditional manufacturing processes
with laser-based techniques: technical and economic feasibility
Session 1: Substitution and Enhancement of Traditional Manufacturing Processes with laser-based
Techniques: Technical and Economic Feasibility (Weds., 3:30 – 5:00, Salon III)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9293 Adrian Lutey,
Laser Profiling Of Aluminum Oxide Grinding Wheels
Alessandro Fortunato,
Simone Carmignato,
Filippo Zanini,
Alessandro Ascari
MSEC2015-9478 Erica Liverani,
A Thermal Model for Laser Hardening Simulation
Alessandro Fortunato,
Donato Sorgente,
Leonardo Daniele
Scintilla, Gianfranco
Palumbo, Alessandro
Ascari
MSEC2015-9216 Chad Hase
GF Machining Solutions - Laser Texturing
Symposium 2-13: Monitoring, Sensing, and Control for Intelligent Machining and Inspection
Session 1: Monitoring, Sensing, and Control for Intelligent Machining and Inspection (Weds., 8:30 –
10:00, Salon IV)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9346 Zhenhua Wu
Cutting Tool Condition Monitoroing And Prediction
Based On Dynamic Data Driven Approaches
MSEC2015-9463 Jinjiang Wang, Xinyao
Dual-Tree Wavelet Packet Transform For Ultrasonic Data
Tang, Zhaoyan Fan,
Transmission Through Metal Structure
Peng Wang, Robert
Gao
MSEC2015-9470 Vasileios Bardis, Farbod Investigation Of The Relationship Between Vibration
Akhavan Niaki, Durul
Data And Tool Wear During End-Milling Of GammaUlutan, Laine Mears
Prime Strengthened Alloys
Session 2: Monitoring and Control for Intelligent Machining (Weds., 10:30 – 12:00, Salon IV)
Session Chair(s): TBD
MSEC2015-9416 Arunachalam
Evaluation of the working surface condition of the
Narayanaperumal,
grinding wheel using speckle image analysis
Vijayaraghavan
Lakshmanan
MSEC2015-9214 Rajesh Vazhayil
Recurrence quantification analysis of system signals for
Govindan, Narayanan
detecting tool wear in a lathe
Namboothiri
Velimamkovil
Narayanan
13
MSEC2015-9357
Farbod Akhavan Niaki,
Durul Ulutan, Laine
Mears
Parameter Estimation Using Markov Chain Monte Carlo
Method In Mechanistic Modeling Of Tool Wear During
Milling
Symposium 2-14: Laser, Process Innovations and Energy Field Manufacturing Methodology
Session 1: Process Innovation 1 (Weds., 1:30 – 3:00, Salon IV)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9238 Rong Cheng, Xiaoyu
Rapid Resistance Welding of Fe78Si9B13 Bulk Metallic
Wu, Shiquan Ling
Glasses
MSEC2015-9377 Junjie Luo, Luke J.
Wire Fed Additive Manufacturing of Transparent Glass
Gilbert, Chuang Qu,
Parts
Jacob S. Wilson,
Edward Kinzel, Douglas
Bristow, Robert G.
Landers
MSEC2015-9433 Brandt Ruszkiewicz,
Direct Electric Current Spot Treatment's Effect On
Christopher Scriva,
Springback Of 90 Degree Bent 2024-T3 Aluminum
Zachary C Reese,
Chetan Nikhare, John
Roth, Ihab Ragai
Session 2: Process Innovation 2 (Weds., 3:30 – 5:00, Salon IV)
Session Chair(s): TBD
MSEC2015-9323 Ninggang Shen,
Cryogenic Cutting of AZ31B-O Mg Alloy for Improved
Hongtao Ding
Surface Integrity – Part I: Experimental Analysis and
Material Modeling
MSEC2015-9324 Ninggang Shen,
Cryogenic Cutting of AZ31B-O Mg Alloy for Improved
Hongtao Ding, Jiaying
Surface Integrity – Part II: Physics-based Process
Gao
Modeling of Surface Microstructural Alteration
MSEC2015-9336 Yuanfeng He, Wenwu
Research on a Novel High-Speed Pulsating Turning
Zhang
Technology
Track 3: Biomanufacturing
Symposium 3-1 Advances in Manufacturing Processes for Biomedical Materials and Devices
Session 1: Advances in Manufacturing Processes for Biomedical Materials and Devices - I (Weds., 8:30
– 10:00, Salon III)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9367 Yang Wu, Jerry Ying Hsi Fabrication of 3D Scaffolds via E-Jet Printing for Tendon
Fuh, Yoke-San Wong,
Tissue Repair
Jie Sun
MSEC2015-9443 Filippos Tourlomousis,
A Novel Melt Electrospinning System for Studying Cell
Azizbek Babakhanov,
Substrate Interactions
14
MSEC2015-9475
Houzhu Ding, Dilhan
Kalyon, Robert C.
Chang
Jingyu Ock, Wei Li
Selective Laser Foaming For Three-Dimensional Cell
Culture On A Compact Disc
Session 2: Advances in Manufacturing Processes for Biomedical Materials and Devices - II (Weds.,
10:30 – 12:00, Salon III)
Session Chair(s): TBD
MSEC2015-9488 Yuan-Shin Lee, Fanxia
Analytical Force Modeling of Ultrasonic Vibration
Kong
Assisted Drilling of Bones for Medical Surgical
Applications
MSEC2015-9295 Zhongwei Hu, Bi Zhang, Experimental study on “break-in” cutting energy of
Wangyuan Lin, Yinghui porcine ascending aorta
Ren, Xipeng Xu, Jianyun
Shen
MSEC2015-9352 Adam Gordon, Inki Kim, Needle Insertion Force Model for Haptic Simulation
Andrew C Barnett,
Jason Z Moore
Session 3: Advances in Manufacturing Processes for Biomedical Materials and Devices - III (Weds.,
1:30 – 3:00, Salon III)
Session Chair(s): TBD
MSEC2015-9266 Marco Giovannini,
Computational And Experimental Study Of Vibrational
Newell Moser,
Motions On Tissue Cutting For Solid Biopsy Needles
Xinsheng Wang, Kornel
Ehmann
MSEC2015-9268 Dedong Gao, Yong Lei, Steerability and Kinematics of Bevel-Tip Flexible Needle
Bin Yao, Qiang Li,
Huiquan Bai
MSEC2015-9353 Andrew C Barnett,
Vibration Needle Tissue Cutting with Varying Tip
Malorie Feidner, Jason Geometry
Z Moore
Track 4: Properties, Applications and Systems
Symposium 4-1 Key Technologies for Cloud Manufacturing
Session 1: Key Technologies for Cloud Manufacturing 1 (Thurs., 10:30 – 12:00, Lakeview)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9485 Matthias Hemmje,
A Semantic Representation For Process-Oriented
Tobias Vogel, Holger
Knowledge Management Based On Functionblock
Brocks, Franz Miltner,
Domain Models Supporting Distributed And
Lihui Wang, Benjamin
Collaborative Production Planning
Gernhardt
MSEC2015-9388 Liang Zhang, Lin Zhang, Cloud Manufacturing Resource Management Based On
Xuesong Zhang, Chun
Metadata
15
MSEC2015-9382
Zhao
Yuqian Lu, Xun Xu
Process And Production Planning In A Cloud
Manufacturing Environment
Session 2: Key Technologies for Cloud Manufacturing 2 (Thurs., 1:30 – 3:00, Lakeview)
Session Chair(s): TBD
MSEC2015-9479 Goran Adamson,
Adaptive Robot Control as a Service in Cloud
Magnus Holm, Lihui
Manufacturing
Wang, Philip Moore
MSEC2015-9245 Jin Cui, Lei Ren, Lin
An Optimal Allocation Method for Virtual Resource
Zhang, Qiong Wu
Considering Variable Metrics of Cloud Manufacturing
Service
MSEC2015-9274 Bitao Yao, Zude Zhou
Service-oriented Predictive Maintenance for Large Scale
Wenjun Xu, Yilin Fang,
Machines Based on Perception Big Data
Qiang Wang, Aiming
Liu
Session 3: Key Technologies for Cloud Manufacturing 3 (Thurs., 3:30 – 5:00, Lakeview)
Session Chair(s): TBD
MSEC2015-9255 Yongquan Xie, Zude
A Forager Adjustment Strategy Used by the Bees
Zhou, Duc T. Pham,
Algorithm for Solving Optimization Problems in Cloud
Quan Liu, Wenjun Xu,
Manufacturing
Chunqian Ji, Ping Lou,
Sisi Tian
MSEC2015-9303 Xi Vincent Wang, Lihui
Function Block-Based Integration Mechanisms For
Wang,
Adaptive And Flexible Cloud Manfuacturing
MSEC2015-9328 Ying Cheng, Fei Tao, Lin Dynamic Supply-Demand Matching For Manufacturing
Zhang, Dongming Zhao Resource Services In Service-Oriented Manufacturing
Systems: A Hypernetwork-Based Solution Framework
Symposium 4-3 Intelligent Maintenance Decision Making of Manufacturing Systems
Session 1: Intelligent Maintenance Scheduling (Weds., 10:30 – 12:00, Salon 1)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9307 Jing Zou, Qing Chang,
Stochastic Maintenance Opportunity Windows For Serial
Yong Lei, Guoxian Xiao, Production Line
Jorge Arinez
MSEC2015-9345 Xufeng Yao, Zeyi Sun,
Joint Maintenance And Energy Management Of
Lin Li, Hua Shao
Sustainable Manufacturing Systems
MSEC2015-9441 Xi Gu, Xiaoning Jin, Jun Real-Time Maintenance Policy In Manufacturing
Ni
Systems With Intermediate Buffers
Session 2: Maintenance for Advanced Manufacturing Systems (Weds., 1:30 – 3:00, Salon 1)
Session Chair(s): TBD
MSEC2015-9375 Zhaoliang Jiang,
Temperature Simulation And Control System For
Wenping Liu, Qingyue
Automobile Coating Line Drying Rooms
Wei, Zhishen Li
MSEC2015-9389 Prahalad Rao, Zhenyu
Sensor-based Online Process Fault Detection in Additive
16
MSEC2015-9393
Kong, Jia (Peter) Liu,
Manufacturing
David Roberson
Masoumeh Aminzadeh, Layerwise Automated Visual Inspection In Laser PowderThomas Kurfess
Bed Additive Manufacturing
Symposium 4-4 Competitive Manufacturing Engineering
Session 1: Competitive manufacturing engineering (Thurs., 8:30 – 10:30, Walden)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9273 Maral Zafar Allahyari,
Improved Bi-level Programming and Heuristics for the
Ahmed Azab
Cellular Manufacturing Facility Layout Problem
MSEC2015-9277 Vishnu Wakchaure,
A Conceptual Framework For Effective Implementation
Keshav N. Nandurkar,
Of Integrated Manufacturing Practices
Shrikant P. Kallurkar,
Mohamed Gadalla
MSEC2015-9298 Mohamed Gadalla,
Evaluation of the Impact of Process Modeling on
Mohamed Seif
Opportunity Losses/Gain in a Manufacturing
Environment
Track 5: Sustainable Manufacturing
Symposium 5-1 System and Sustainability Considerations for Emerging Manufacturing
Technologies
Session 1: Sustainability considerations for manufacturing technologies and processes 1 (Thurs., 10:30
– 12:00, Burnham)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9420 Huanyi Shui, Xiaoning
An Anomaly Detection And Diagnosis Method Based On
Jin, Jun Ni
Real-Time Health Monitoring For Progressive Stamping
Processes
MSEC2015-9428 Chenhui Shao, Tae
Tool Wear Monitoring for Ultrasonic Metal Welding of
Hyung Kim, S. Jack Hu,
Lithium-ion Batteries
Jionghua (Judy) Jin,
Jeffrey A. Abell, J.
Patrick Spicer
MSEC2015-9422 Dennis J.L. Siedlak, Paul Supporting Affordability-Based Design Decisions in the
R. Schlais, Olivia J.
Presence of Demand Variability
Pinon, Dimitri N.
Mavris
Session 2: Sustainability considerations for manufacturing technologies and processes 2 (Thurs., 1:30
– 3:00, Burnham)
Session Chair(s): TBD
MSEC2015-9218 Michael Brundage,
Reducing Costs in the Manufacturing Industry: An
Qing Chang, Jorge
Energy Economic Perspective
17
MSEC2015-9365
Arinez, Guoxian Xiao
Yachao Wang, Jing Shi,
Yun Wang
Steve Wang, Teresa J.
Williams
Reinforcing Inconel 718 Superalloy By Nano-Tic Particles
In Selective Laser Melting
MSEC2015-9397
Feasibility Analysis Of Using Local Remanufactured
Products – A Case Study Of Industrial Starters And
Alternators
Session 3: Sustainability considerations for manufacturing technologies and processes 3 (Thurs., 3:30
– 5:00, Burnham)
Session Chair(s): TBD
MSEC2015-9256 Yang Li, Xiaoning Jin,
Markov Decision Models For Optimal Decision Making In
Qing Chang, Jun Ni
Bottlenecks Identification And Mitigation In Advanced
Manufacturing Systems
MSEC2015-9257 Yang Li, Qing Chang,
Stochastic Energy Opportunity Windows In Advanced
Jun Ni, Xiaoning Jin
Manufacturing Systems
MSEC2015-9384 Steve Wang, Shu-Ping
Determination Of Sustainable Design-Centered Factors
Chang, Jing Shi
For Manufacturing Bioprinting Material Of Polylactic
Acid
Symposium 5-2 Sustainable Manufacturing Processes and Systems
Session 1: Sustainable manufacturing systems (Thurs., 8:30 – 10:00, Salon III)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9232 Rebecca Ilsen,
Virtual Test Field for Sustainability Assessment of
Hermann Meissner, Jan Cybertronic Production Systems
C. Aurich
MSEC2015-9281 Lujia Feng, Laine Mears Analysis of HVAC Energy in Automotive Paint Shop
MSEC2015-9378 Shaw Feng,
Energy Assessment Methodology For Product Assembly
Senthilkumaran K,
Processes
Xiufang Sun
Session 2: Sustainable manufacturing processes (Thurs., 10:30 – 12:00, Salon III)
Session Chair(s): TBD
MSEC2015-9296 Pil-Ho Lee, Jung Soo
Experimental Study On Micro-Grinding Process Of
Nam, Jung Sub Kim,
Titanium Alloy Using Electro-Hydro-Dynamic Spray With
Sang Won Lee
Nanofluid And Compressed Air
MSEC2015-9402 Kuldip Singh, Jatinder
Sustainability Performance Assessment Of Alternate
Madan
Machining Technologies
MSEC2015-9498 Molong Duan,
Energy Efficiency And Performance Optimized Control
Chinedum Okwudire
Of A Hybrid Feed Drive
Symposium 5-3 Sustainable Manufacturing Technologies and Practices
Session 1: Sustainable manufacturing methods (Thurs., 1:30 – 3:00, Salon III)
Session Chair(s): TBD
Paper #
Authors
Title
MSEC2015-9229 Bingbing Li, Hong-Chao Thermodynamic analysis of TiO2 nanotube synthesis
18
Zhang, Chris Yuan
process for sustainability improvement
MSEC2015-9371 Harsha Malshe, Hari
Profile Of Sustainability In Additive Manufacturing And
Nagarajan, Yayue Pan,
Environmental Assessment Of A Novel
Karl R. Haapala
Stereolithography Process
MSEC2015-9466 Patrick Kwon, Trung
A Study On Application Of Minimum Quantity
Nguyen, Dihn Nguyen,
Lubrication (Mql) Using Vegetable Oil Mixed With NanoPeter Howes, KyungPlatelet Solid Lubricant In Milling Ti-6al-4v
Hee Park
Session 2: Industrial energy efficiency (Thurs., 3:30 – 5:00, Salon III)
Session Chair(s): TBD
MSEC2015-9458 Samuel Brannon, Brian The Development of Formed Microchannel Flow Inserts
K. Paul
for High Temperature Waste Heat Recuperators
MSEC2015-9354 Jinkyoo Park, Raunak
A Generalized Data-driven Energy Prediction Model
Bhinge, Nishant Biswas, With Uncertainty For A Milling Machine Tool Using
Amrita Srinivasan,
Gaussian Process
Kincho Law, David
Dornfeld, Moneer Helu,
Sudarsan Rachuri
MSEC2015-9398 Junling Xie, Chris Yuan
Factorial Study Of Thin Layer Ring On Improving Thermal
Performance Of Building Thermal Storage System
MSEC Panel Discussions
Panel 1: National Network for Manufacturing Innovation: How to get Involved in the National
Network for Manufacturing Innovation
(Weds., 10:30 – 12:00, Salon II)
Session Chair(s): Brian Paul
Participant
Affiliation
Dr. Dean Bartles
Digital Manufacturing and Design Innovation Institute – Executive Director
Mr. Ralph Resnick
NCDMM - Director
Dr. Janis Terpenny
Iowa State University
Dr. Steve Schmid
University of Notre Dame
19