DIRECTORATE GENERAL NATIONAL SECURITY GUARD
OPERATIONS BRANCH (WE SEC)
1.
Formulation of ORs for Engr Tool Kit as per Appx att are being contemplated.
2.
OEM/Firms are requested to forward their comments/suggestionson
the draft ORs as per
proforma given below alongwith the details (product specifications, pectoral'setc) of their product
meeting the referred ORs.
'.
3,
It is requested that comments
mentioned within 30 days.
if any on the ORs may please' be forwarded to the under
Operations Directorate
WE Branch
HQ National Security Guard
Mehram Nagar
Near Domestic Airport
Palam
New Delhi - 110037
Fax No - 011-25671528++
E-mail: [email protected]
:;
." -.
. .
'
DRAFT QRs OF ENGR TOOL KIT
Ser
No
1.
2.
3.
4.
Vendors
Specifications/QRs
Screw Driver.
It should have.
(a)
A durable, hard handled textured grip.
(b)
An overall length 7"-8".
(c)
Shaft Length between 3"-4".
(d)
Handle Length between 4"-5".
(e)
Hardened and Tamped remo vable tips for
mechanical use of cut type, pin type, star type, Flat /
square tip type of 5mm size.
Spanner Adjustable.
It should be.
(a)
A ratchet adjustable wrench.
(b)
Full length 255mm - 31 Omm.
(c)
Opening Capacity - at least 38mm.
(d)
Heat treated.
Cutting Plier.
(a)
Made of carbon sheet/chrome
(b)
Size 6" (150mm) to 8" (200mm)
(c)
Polished and chrome plated.
(d)
Insulation sleeve.
vanadium steel.
(e)
Duly hardened comfortable qrip for handline.
Mini Hack Saw.
(a)
The frame should be rigid zinc plated steel and
ergonomic plastic grip styled handle.
(b)
The replacing and tensioning of blade can be
done through adjustment of the nut incorporated in the
nut.
(c)
It should
blades.
have
at least 24 TPI
low alloyed
(d)
Length of blade should be between 250mm300mm and two spare blades should be provided.
comments
2
Specifications/QRs
I ~~r
5.
Vendors comments
Bolt Cutter.
(a)
The overall length of the bolt cutter should be
max 19 inches.
(b)
6.
The bolt cutter should be centre cut.
(c)
The jaw should be made of alloy hardened,
comfortable qrip for proper handlmq.
Insulation Tape.
(a)
vinyl.
It should be pressure - sensitive tape made of
(b)
It should give long lasting insulation.
(c)
It should
insulation type.
(d)
(ii)
Hammer Portable.
adhesive
PVC
electrical
Length - min 8 mtns.
Width - 1.5 cms to 2 cms.
(a)
It should
tubular shaft.
(b)
self
Dimensions:(i)
7.
be
be polished
or chrome
plated with
It should be deep forged from carbon sheet.
(c)
The weight of the hammer should be between
500 - 600 gms.
(d)
It should have duly hardened
for proper handling.
8.
comfortable
grip
(e)
It's total lenqth includinq head 10"-12".
Measuring Tape.
(a)
It should
be retractable
measuring
capable of measuring up to 3 meters.
(b)
tape,
It should have metal belt clip.
(c)
It should
have marking
centimetres and millimetres.
including
meters,
---------
3
Ser
No
Specifications/QRs
Vendors comments
Glass Cutter.
(a)
It should
handle.
have strong copper
or plastic fibre
(b)
It should have wide and high grade block iron
head.
10.
(c)
The cutting thickness should be between 3mm10mm.
Drilling Machine.
(a)
It should have 3-5 variable speeds.
(b)
It should
100mm.
have
drilling
dia
between
80mm-
(c)
It should be portable and be able to drill wood,
masonry, and iron material.
(d)
It should have drill bits of following
sizes.
11 .
12.
(i)
6.5 inch long with 7mm dia.
(ii)
5.5 inch long with 6 mm dia.
(iii)
4.5 inch long with 5 mm dia.
(iv)
3.5 inch long with 4 mm dia.
(v)
2.5 inch long with 3 mm dia.
(vi)
1.5 inch long with 2mm dia.
12 various
Wire Cutter.
(a)
Vinyl handles for comfort.
(b)
Length 8"-10".
(c)
Tin Cutter.
Distance between two handles 6"-8".
(a)
It should have copper handle.
(b)
It should have high grade black iron wide head.
(c)
Its cutting thickness
10mm.
should be between
3mm-
4
Specifications/QRs
Ser
Vendors
No
13.
Wire Stripper.
(a)
It should have strip and cut insulation on copper
wire ranging from 0.5 mm to 2.5 mm or 6mm diameter.
14.
(b)
It should have comfortable vinyl grips
stripping capacity between 0.5 mm to 6mm.
Bty 12V.
(a)
15.
(b)
Multimeter.
and
It should be maintenance free.
Specifications:
12V, 1OAH.
(a)
It should have packet held DMM with Bar graph
and analogy bar graph.
(b)
It should have 3200-3500 count display.
(c)
It should have auto power off, range hold and
data hold.
(d)
It should read DC current upto 100V and AC
current upto 250V
16.
Tool Kit Bag.
(a)
It should be.
Portable.
(b)
It should be Black or Blue or Grey in colour and
made of heavy duty canvas.
17.
(c)
It should have flat / related toll rolls and divided
packets for case and commence of handling.
Day pack (Engr Bag).
(a)
Back
canvas.
pack
model
and made
of heavy
duty
(b)
It should have large main pockets, two large
side packets and adjustable shoulders straps (size to
be specified by the user).
comments
Appendix 'B'
INFORMATION
1.
Name of the Vendor/Company/Firm.
(Company
2.
3.
PROFORMA
profile,
in brief, to be attached)
Type (Tick the Relevant Category).
(a)
Original
Equipment
Manufacturer
(b)
Government
sponsored
(Details of Registration
(a)
Authorised
(b)
Other
(c)
Any collaborator/partner
Export Agency
be provided)
Representative
(give specific
(OEM)
of OEM
Yes
No
0
Yes
No
0
0
0
Yes
No
0
0
details)
in India (in case of foreign
vendors).
Contact Details.
Postal Address
City:
Province
Country:
Pin/Zip
Tele:
---------
URL/Website:
4.
Code:
_
Fax:
Office/Authorised
Name and Address
City:
Tele:
_
----------------------
Local Branch/Liaison
Country:
:
Representatives
Province
_
---------
Pin/Zip
Fax:
in Delhi ( if any).
:
_
Code:
_
-------------
2
5.
Financial Details.
(a)
Annual turnover:
(b)
Earlier contracts with Indian Ministry of Defence/ Government
Agency
(c)
6.
Equipment
Details of manufacturing
Certification
Agency
7.
Contract
Number
USD
infrastructure
by Quality Assurance
Cost
available:
Organization
Certificate
Equipment/Product
Quantity
agencies:-
( If Applicable).
Applicable from
(Date & Year)
Valid till (Date &
Year)
Profile (to be submitted for each product separately).
(a)
Name of the Product :
(Should be given category wise for e.g. all products under night vision devices to be
mentioned. together)
(b)
Description (attach technical literature) :
_
(c)
Whether OEM or Integrator:
_
(d)
Status (in service/Design
(e)
Production capacity per annum:
(d)
Countries where equipment is in service:
development
state) :
_
_
_
(g)
Whether export clearance is required from respective government
Vendors only).
(h)
(Foreign
In case of equipment and ammunition JV/MoU compliance to be specified.
3
U)
Details of any collaboration/joint venture/co production/ authorized dealer with
Indian Industry (Foreign Vendors only) :
Name & Address:
8.
-----------------------------------------
Tele:
-------------------
Fax:
(a)
Are you making the full equipment or is it being integrated by you? Give details.
---------------------------
(b)
What are the components, sub system or sub-assemblies
are not manufactured by you? Please give details.
9.
Details of participation
in similar procurement
10.
Any other Relevant Information.
of the equipment which
cases in India in the past.