EJDER KUNTER
Armored Truck
Ejder Kunter;
Powerful, Safe, Superior Mobility Performance.
KUNTER
EJDER KUNTER which was uniquely
designed by Nurol Makina, is a
platform that has fully independent
suspension system with 4x4, 6x4 and
6x6 customization. With its off-road
performance, EJDER KUNTER can
operate effectively in rural areas as
well as urban areas in every weather
condition. It enables the users to operate
with high performance and confidence
by the vehicle’s front ergonomic cabin
with high ballistic protection.
The system design of EJDER KUNTER
can be configured according to the
users requirements and can offer
special platform solutions including the
integration of turrets. EJDER KUNTER
which has a unique chassis can be
customized for military, internal security
and civil areas.
Protection Features
Armored cabin,
Protected windows against
ballistic threats,
Run-flat tires,
Positive pressured cabin,
Emergency exit hatch on
the vehicle.
Off-Road Performance
Continuous or lockable
4x4, 6x4 or 6x6 drive
options,
Fully independent
suspension system,
Lockable latitudinal and
longitudinal differential
locks,
Long diameter tires with
wide tread area,
Anti-lock braking
system.
Adaptable Configurations
Logistics Vehicle,
Tanker,
Weapon Carrier Truck,
Command and Control Vehicle,
Armored Personnel Carrier Vehicle,
Armored Money Transport Vehicle,
Prisoner Transport Vehicle,
CBRN Vehicle,
Internal Security Vehicle,
Reconnaissance Vehicle,
Armored Ambulance.
Efficient parking brake system with full payload and at
minimum 30% slope,
Assisted power steering,
Ability to work between -25 0C - +40 0C,
Air conditioning system,
Controllable and ergonomic driver and operator seat,
Optional fire extinguishing system,
Optional engine pre-heating system
Long and short chassis options,
Double cabin option.
www.medyamod.com
1800 mm
Base Vehicle Features
Note: Dimensions may vary depending on the configurations and options.
Speed
110 km/h
Range
600 km
Fuel Tank
300 liters
Payload Capacity (4x4)
11 tons
Payload Capacity (6x4, 6x6)
20 tons
Engine
296 HP
Fording
0,7 m.
Side Slope
%30
Gradient
%30
Obstacle Climbing
0,4 m.
Trench Crossing
0,5 m.
The Technical features may change according to configuration and Nurol Makina ve Sanayi A.Ş. has right to change without any notice.
www.nurolmakina.com.tr
Organize Sanayi Bölgesi Avrupa Hun Caddesi
No:6 Sincan ANKARA TURKEY
Phone: +90 [ 312 ] 267 05 30
Fax: +90 [ 312 ] 267 01 55
NurolMakina