1. No category

National Course Code: UEE30811 Version: 3
OTEN Course Structure for
UEE30811 Certificate III in Electrotechnology Electrician
Below are listed all the units for TAFE NSW Course UEE30811 - Certificate III in Electrotechnology Electrician.
Units in bold are required for this course at OTEN, those greyed out are included in the training package, also see the legend for the Note column.
If in bold italics it is part of an alternative pathway. Refer to the OTEN Student Pathway for the unit sequence.
NOTE: Always refer to the latest version of the course found on TAFE NSW website. The information below is subject to change.
Course Structure Information: OTEN recommends the completion of the Data Cabling Electives which will result in the completion of 170 points
of TOTAL Elective Units. If the alternative PLC Electives are undertaken this will result in the completion of 150 points of TOTAL Elective Units.
These additional units are for the purposes of industry and study pathways.
Core Competency Standard Units (All units must be completed)
Unit Code
UEENEEC020B
UEENEEE101A
UEENEEE102A
UEENEEE104A
UEENEEE105A
UEENEEE107A
UEENEEE137A
UEENEEG006A
UEENEEG033A
UEENEEG063A
UEENEEG101A
UEENEEG102A
UEENEEG103A
UEENEEG104A
UEENEEG105A
UEENEEG106A
UEENEEG107A
UEENEEG108A
UEENEEG109A
UEENEEK142A
Unit Title
Participate in electrical work and competency development activities
Apply Occupational Health and Safety regulations, codes and practices in the workplace
Fabricate, assemble and dismantle utilities industry components
Solve problems in d.c. circuits
Fix and secure electrotechnology equipment
Use drawings, diagrams, schedules, standards, codes and specifications
Document and apply measures to control OHS risks associated with electrotechnology work
Solve problems in single and three phase low voltage machines
Solve problems in single and three phase low voltage electrical apparatus and circuits
Arrange circuits, control and protection for general electrical installations
Solve problems in electromagnetic devices and related circuits
Solve problems in low voltage a.c. circuits
Install low voltage wiring and accessories
Install appliances, switchgear and associated accessories for low voltage electrical installations
Verify compliance and functionality of low voltage general electrical installations
Terminate cables, cords and accessories for low voltage circuits
Select wiring systems and cables for low voltage general electrical installations
Trouble-shoot and repair faults in low voltage electrical apparatus and circuits
Develop and connect electrical control circuits
Apply environmentally and sustainable procedures in the energy sector
Points
60
20
40
80
20
40
20
80
60
40
60
80
20
20
40
40
60
40
80
20
Note
Points
10
10
10
20
20
20
20
20
20
20
60
20
Note
E
E
E
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
Elective Units - Comprising of two (2) Elective Groups where a total of 140 points MUST be completed
Group A - Imported and Common Elective Units
MAY complete up to 60 points
Unit Code
CPCCOHS1001A
HLTAID001
HLTAID003
UEENEEC001B
UEENEEC002B
UEENEEC003B
UEENEEC010B
UEENEED101A
UEENEEE009B
UEENEEE020B
UEENEEM060A
UETTDREL16A
Unit Title
Work safely in the construction industry
Provide cardiopulmonary resuscitation
Provide first aid
Maintain documentation
Source and purchase material/parts for installation or service jobs
Provide quotations for installation or service jobs
Deliver a service to customers
Use computer applications relevant to a workplace
Comply with scheduled and preventative maintenance program processes
Provide basic instruction in the use of electrotechnology apparatus
Carry out overhaul and repair of explosion-protected equipment - coal mining
Working safely near live electrical apparatus
^
LEGEND - Identified in the ‘Note’ column are units:
A in the “Note” column are units that are for those doing the Data Cabling Electives
B in the “Note” column are units that are for those doing the Equipment and PLC Electives
E in the “Note” column are provided by External Training Providers (refer to student pathway for further details)
^ in the “Note” column are units that are also contained in some of OTEN’s Electrotechnology Diploma/Advance Diploma courses
O in the “note” column are units available for study at OTEN. Please contact OTEN Engineering Services to study any of these unit(s) for course UEE30811
NOTE: OTEN recommends the completion of 170 points of TOTAL Elective Units for the purposes of industry and study pathways. Please refer to the UEE30811
Student Pathway.
Elective Units - Continued
Group B – Qualification Elective Units
MUST complete a minimum of 80 weight points and up to 140 points from this elective group
Unit Code
UEENEEA110A
UEENEEA112A
UEENEEA113A
UEENEED104A
UEENEEE121A
UEENEEF102A
UEENEEF104A
UEENEEG110A
UEENEEG111A
UEENEEG113A
UEENEEG116A
UEENEEG118A
UEENEEG119A
UEENEEG120A
UEENEEG126A
UEENEEG129A
UEENEEG150A
UEENEEG151A
UEENEEG152A
UEENEEG153A
UEENEEG154A
UEENEEG157A
UEENEEG159A
UEENEEG164A
UEENEEG165A
UEENEEG166A
UEENEEG167A
UEENEEG171A
UEENEEG181A
UEENEEG182A
UEENEEG183A
UEENEEG189A
UEENEEH102A
UEENEEH111A
UEENEEH150A
UEENEEI101A
UEENEEI102A
UEENEEI103A
UEENEEI104A
UEENEEI105A
UEENEEI116A
UEENEEI140A
UEENEEI141A
UEENEEI150A
UEENEEJ102A
UEENEEJ103A
UEENEEJ104A
UEENEEJ105A
UEENEEJ172A
UEENEEK125A
UEENEEK148A
UEENEEM019A
UEENEEM020A
UEENEEM021A
UEENEEM022A
UEENEEM023A
UEENEEM024A
UEENEEM025A
UEENEEM026A
UEENEEM027A
UEENEEM028A
UEENEEM029A
Unit Title
Assemble, mount and connect control gear and switchgear
Fabricate and assemble bus bars
Mount and wire control panel equipment
Use engineering applications software on personal computers
Plan an integrated cabling installation system
Install and maintain cabling for multiple access to telecommunication services
Install and modify performance data communication copper cabling
Find and repair faults in LV d.c. electrical apparatus and circuits
Carry out basic repairs to electrical components and equipment
Install and maintain emergency safety systems
Diagnose and rectify faults in traction lift systems
Maintain operation of electrical mining equipment and systems
Maintain operation of electrical marine equipment and systems
Select and arrange equipment for special LV electrical installations
Install and maintain field power and distribution systems with a low voltage demand up to 200 A per
Overhaul and repair major switchgear and controlgear
Wind electrical coils
Place and connect electrical coils
Rewind single phase machines
Rewind three phase low voltage induction machines
Rewind LV direct current machines
Conduct electrical tests on LV electrical machines
Conduct mechanical tests on electrical machines and components
Repair and maintain mechanical components of electrical machines
Maintain and service traction lifts systems and equipment
Install and maintain escalators, moving walks and treadways
Align and install traction lift equipment
Install, set up and commission interval metering
Provide advice on effective and energy efficient lighting products
Supply effective and efficient lighting products for domestic and small commercial applications
Provide advice on the application of energy efficient lighting for ambient and aesthetic effect
Install and maintain emergency lighting systems
Repairs basic electronic apparatus faults by replacement of components
Troubleshoot single phase input d.c. power supplies
Assemble and set up basic security systems
Use instrumentation drawings, specification, standards and equipment manuals
Solve problems in pressure measurement components and systems
Solve problems in density/level measurement components and systems
Solve problems in flow measurement components and systems
Solve problems in temperature measurement components and systems
Assemble, enter and verify operating instructions in microprocessor equipped devices
Plan the electrical installation of integrated systems
Develop electrical integrated systems
Develop, enter and verify discrete control programs for programmable controllers
Prepare and connect refrigerant tubing and fittings
Establish the basic operating conditions of vapour compression systems
Establish the basic operating conditions of air conditioning systems
Position, assemble and start up single head split air conditioning and water heating heat pump systems
Recover, pressure test, evacuate, charge and leak test refrigerants – split systems
Solve basic problems in photovoltaic energy apparatus and systems
Install, configure and commission LV grid connected photovoltaic power systems
Attend to breakdowns in hazardous areas - coal mining
Attend to breakdowns in hazardous areas - gas atmospheres
Attend to breakdowns in hazardous areas - dust atmospheres
Attend to breakdowns in hazardous areas – pressurisation
Install explosion-protected equipment and wiring systems - coal mining
Install explosion-protected equipment and wiring systems - gas atmospheres
Install explosion-protected equipment and wiring systems - dust atmospheres
Install explosion-protected equipment and wiring systems - pressurisation
Maintain equipment in hazardous areas - coal mining
Maintain equipment in hazardous areas - gas atmospheres
Maintain equipment in hazardous areas - dust atmospheres
Points
40
40
40
40
40
120
40
60
40
60
80
60
60
60
40
60
40
40
40
60
60
40
40
40
40
40
20
20
20
40
20
40
40
40
80
40
40
40
40
40
20
20
20
60
30
60
20
70
60
20
40
20
20
20
20
60
60
60
60
60
60
60
Note
A^
O
B^
^
B ^
Elective Units - Continued
Group B – Qualification Elective Units
MUST complete a minimum of 80 weight points and up to 140 points from this elective group
Unit Code
UEENEEM030A
UEENEEM038A
UEENEEM039A
UEENEEM040A
UEENEEM041A
UEENEEM042A
UEENEEM076A
UEENEEM077A
UEENEEM080A
UEENEEN102A
UEENEEN103A
UEENEEN104A
UEENEEN121A
UETTDRIS43A
UETTDRIS44A
UETTDRIS47A
UETTDRIS67A
UETTDRIS68A
UETTDRSB23A
UETTDRSB29A
UETTDRSB39A
Unit Title
Maintain equipment in hazardous areas – pressurisation
Conduct testing of hazardous areas installations - coal mining
Conduct testing of hazardous areas installations - gas atmospheres
Conduct testing of hazardous areas installations - dust atmospheres
Conduct testing of hazardous area installations - pressurisation
Conduct visual inspection of hazardous areas installations
Use and maintain the integrity of a portable gas detection device
Install and maintain the integrity of fixed gas detection equipment
Report on the integrity of explosion-protected equipment in a hazardous area
Assemble and wire internal electrical rail signalling equipment
Install and maintain rail track circuit leads and bonds
Test copper rail signalling cables
Repair rail signalling power and control cables
Perform low voltage field switching operations to a given schedule
Perform HV field switching operation to a given schedule
Sample4, test filter and reinstate insulating oil
Solve problems in energy supply network equipment
Solve problems in energy supply network protection equipment and systems
Install and maintain substation direct current systems
Maintain capacitor bank equipment for voltage regulation
Perform power system substation switching operation to a given schedule
Points
60
40
40
40
40
40
20
20
20
30
30
20
40
50
50
40
80
40
30
40
50
Note
LEGEND - Identified in the ‘Note’ column are units:
A in the “Note” column are units that are for those doing the Data Cabling Electives
B in the “Note” column are units that are for those doing the Equipment and PLC Electives
E in the “Note” column are provided by External Training Providers (refer to student pathway for further details)
^ in the “Note” column are units that are also contained in some of OTEN’s Electrotechnology Diploma/Advance Diploma courses
O in the “note” column are units available for study at OTEN. Please contact OTEN Engineering Services to study any of these unit(s) for course UEE30811
NOTE: OTEN recommends the completion of 170 points of TOTAL Elective Units for the purposes of industry and study pathways. Please refer to the UEE30811
Student Pathway.