1. No category

Installation instructions for the
Installation
instructions
for systems
system’s
pedestrian
gate and
Sparta 50double-leaf
and Sparta
gate 75
Sparta 50
1. Installation instructions for the Sparta 50 system pedestrian gate and double-leaf
gate – page 3
2. Installation instructions for the Sparta 50 system sliding gate – page 10
3. Installation instructions for Sparta 50 and Sparta 75 system spans – page 14
Sparta is a robust fencing system based on galvanized, profiled and welded wire mesh.
It is perfect for industrial, commercial, sports and residential venues.
Available system elements:
Sparta 75, panel, 3.4 mm
(mesh size: 75/200 mm)
2500 x 1530 mm
Sparta 50, pedestrian gate,
Sparta 50, sliding gate right/left
4.0 mm
6000 x 1470 mm
Sparta 50, panel, 4.0 mm
(mesh size: 50/200 mm)
2500 x 1230 mm, 2500 x 1530 mm,
2500 x 1730 mm
galvanized
galvanized+RAL 6005
4.0 mm, right/left,
1000 x 1530 mm
1000 x 1730 mm
galvanized
galvanized+RAL 6005
galvanized
galvanized+RAL 6005
Sparta 50, gate,
4.0 mm
4000 x 1530 mm, 4000 x 1730 mm
Sparta 50, gate,
3500 x 1530 mm
galvanized galvanized+RAL 6005
galvanized
post for double-leaf gate and pedestrian gate
70 x 70 x 2150 mm
galvanized
galvanized+RAL 6005
Sparta 50, gate, 4.0 mm
3000 x 1530 mm
4.0 mm
galvanized+RAL 6005
galvanized
panel post
60 x 40 x 2000 mm
galvanized
galvanized+RAL 6005
galvanized+RAL 6005
panel post
60 x 40 x 2400 mm
galvanized
galvanized+RAL 6005
Accessories:
end wrap
around clip
handle
corner wrap
around clip
intermediate
wrap around clip
pedestrian
gate lock
galvanized
strike plate
The system is available in the following colours:
2
galvanized
bracket
with screw
universal
gate stop
panel clips
hook
lock
galvanized+RAL 6005
hook tension
Installation instructions for the
Sparta 50
system pedestrian gate and
double-leaf gate
3
Necessary tools
List of elements
1 SET
1x B h=1530 mm or 1730 mm
1 SET
1x C h=1530 mm or 1730 mm
3 SETS
E
x 1530 mm
1x A 1000
or 1000 x 1730 mm
4
3x D 70x70x2150 mm
1
Pedestrian gate and gate on-site positioning
PEDESTRIAN GATE AND GATE
LOCATION selected by the user
2
Excavating for foundations
FOUNDATION EXCAVATION - CROSS-SECTION
H
H+100
H - frost line
FOUNDATION EXCAVATION - TOP VIEW
400
250
400
POST LOCATION
5
3
Reinforcement
4x Bar Ø12
Bar Ø6 L=1140
75
75
150
150
975
150
1000
150
150
260
260
75
260
4
Inserting reinforcement in excavations
REINFORCEMENT PLACED IN FOUNDATION EXCAVATIONS - CROSS-SECTION
6
5
Assembly of pedestrian gate and gate with posts on a flat surface
!
PRESERVE THE LINEAR ARRANGEMENT
OF ELEMENTS
D
D
E
A
B
C
E
I
III
!
pin
Seeger
ring
set appropriate distance
II
IV
7
6
Positioning of stable pedestrian gate and gate with posts in excavations
where reinforcement is erected
POSTS PLACED IN FOUNDATION EXCAVATIONS - CROSS-SECTION
7
Supporting posts
Supporting bar
8
8
Filling excavation with concrete
FOUNDATION CROSS-SECTION
CONCRETE
9
Positioning of gate stop in concrete
GATE STOP
PURCHASED
SEPARATELY
CONCRETE
CONCRETE
Detailed installation instructions for double-leaf gates are available at www.polargos.pl and from authorised sellers.
9
Installation instructions for the
Sparta 50
system sliding gate
10
Necessary tools
Accessories
M16
M24
List of elements
1 SET
1x A 6000 x 1470 mm
1x D
1x B 2200x100x100 mm
1x C 2000x70x70 mm
2x E
11
1
Sliding gate on-site positioning
SLIDING GATE LOCATION
selected by the user
2
Excavation for installing posts and gear racks
FOUNDATION EXCAVATION - CROSS-SECTION
H
H+100
H - frost line
FOUNDATION EXCAVATION - TOP VIEW
gate axis
400
400
12
END POST
LOCATION
INTERMEDIATE POST AND GEAR
RACK LOCATION
3
Filling the excavation with concrete
!
PERFORM TEST INSTALLATION BEFORE
CONCRETING
C
INTERMEDIATE POST AND GEAR RACKS
ARRANGEMENT - TOP VIEW
FOUNDATION CROSS-SECTION
B
E
anchor rods M16 cl. 5.6
L=500 mm+2 nuts+2 washers
not included in the gate set
CONCRETE
4
Assembly of track roller, hook lock and positioning gate on gear racks
I
D
A
B
A
II
HOOK LOCK
PURCHASED
SEPARATELY
III
E
Detailed installation instructions for sliding gates are available at www.polargos.eu and from authorised sellers.
13
Installation instructions for
Sparta 50 and Sparta
system spans
14
75
Necessary tools
Option:
M8
pliers for panel
clips
additional protection for
wrap around clips
M8
List of elements
QUANTITY SELECTED
AS NECESSARY
QUANTITY SELECTED
AS NECESSARY
post 60x40x2000 mm:
- panel 2500x1230 mm
- panel 2500x1530 mm
!
2500x1230 mm + 2 POST FASTENERS
A 2500x1530 mm + 3 POST FASTENERS
2500x1730 mm + 3 POST FASTENERS
B
post 60x40x2400 mm:
- panel 2500x1230 mm
- panel 2500x1530 mm
- panel 2500x1730 mm
I. PANELS CONNECTED BY WRAP
AROUND CLIPS
(initial) bracket
with screw
II. PANELS CONNECTED
BY HOOK TENSION AND
CLIPS
intermediate wrap around clip
tension hook
D
G
corner wrap around clip
end wrap around clip
panel clip
E
F
H
C
NUMBER AND TYPE OF FASTENINGS SELECTED AS NECESSARY
15
1
Spans and posts on-site positioning
SPAN AND POST LOCATION
selected by the user
2
Excavation for foundations
FOUNDATION EXCAVATION - CROSS-SECTION
H
H+100
H - frost line
FOUNDATION EXCAVATION - TOP VIEW
400
400
16
POST LOCATION
3
Inserting reinforcement in excavations
Reinforcement p. 6, step 3
REINFORCEMENT INSERTED IN FOUNDATION EXCAVATIONS - CROSS-SECTION
4
Positioning posts at appropriate intervals depending on panel type
POST ARRANGEMENT - CROSS-SECTION
B
17
5
Placing posts in concrete
FOUNDATION CROSS-SECTION
B
CONCRETE
CONCRETE
CONCRETE
I. PANELS CONNECTED BY WRAP AROUND CLIPS
6
Post-to-span assembly - INITIAL FASTENER
I
C
B
B
II
A
A
GATE
PANEL
III
18
IV
V
7
Post-to-span assembly - INTERMEDIATE WRAP AROUND CLIP
I
D
B
A
A
M8
OPTIONAL
II
8
Post-to-span assembly - CORNER WRAP AROUND CLIP
E
A
I
B
A
II
19
9
Post-to-span assembly - END WRAP AROUND CLIP
B
F
I
A
A
II
II. PANELS CONNECTED BY TENSION HOOK AND CLIPS
10 Post-to-span assembly - PANEL CLIP, TENSION HOOK
H
G
G
H
G
H
H
Oziemkówka 57A, 08-420 Miastków Kościelny, ph.: +48 25 683 05 55, fax: +48 25 683 78 38
www.polargos.eu, e-mail: [email protected]