GV-N960WF2OC-2GD Default BIOS Flashing Guide

GV-N960WF2OC-2GD Default BIOS Flashing Guide
Step 1
Insert the DVI cable to DVI-I Port and turn on the computer.
Step 2
Remove all currently NVIDIA drivers from control panel then restart the computer.
1
Step 3
Click “N960FlashDP” then it will flash the DP BIOS automatically.
Step 4
After DP BIOS flashing, shutdown the computer manually.
Then Insert the DVI cable to DVI-D Port and turn on the computer
2
Step 5
Click “N960FlashDD” then it will flash the DD BIOS automatically.
After BIOS flashing, re-start the computer.
Step 6
Install the driver from driver CD which is in the package box.
Step 7
After driver install finished, please re-boot the system again and BIOS flashing
process has been done.
3