Reset Instructions
Safety Turtle Resetting Base Unit to Factory Setting If for any reason your Safety Turtle system does not function properly, reset to Factory Settings Factory Reset Factory Reset Factory Reset Step 1: Unplug Base Unit from wall outlet. Step 4: Wait One Minute Step 6: Inset AC adapter into bottom of Base Unit. Be sure it is pushed all the way in Factory Reset Step 2: Unplug AC adapter from bottom of Base Unit Factory Reset Step 5: Replace baby turtle and insure it snaps into the front of the base unit Factory Reset Step 3: Remove baby turtle from front of Base Unit 15375 Barranca Pkwy Suite B107 Irvine, CA 92618 Phone: 949-943-3349 [email protected] www.safetyturtle.com Factory Reset Step 7: Plug AC adapter into wall outlet. Green light will indicate system is armed and ready
© Copyright 2024