Safety Turtle
Resetting Base Unit to Factory Setting
If for any reason your Safety Turtle system does not function properly, reset to Factory Settings
Factory Reset
Factory Reset
Factory Reset
Step 1:
Base Unit must be
plugged into wall
outlet.
Step 4:
Wait One Minute
Step 6:
Green light will indicate
system is armed and
ready.
Factory Reset
Step 2:
Remove Baby Turtle
from front of Base.
Factory Reset
Step 5:
Replace baby turtle and
insure it snaps into the
front of the base unit
Factory Reset
Step 3:
Base Unit will beep
continuously.
15375 Barranca Pkwy Suite I-112 Irvine, CA 92618
Phone: 949-943-3349
[email protected] www.safetyturtle.com
Factory Reset
Step 7:
If this does not solve
your problem try to
relocate the Base.