2 - XpressKit.com

Directed Digital System
FORD1
Firmware Specific Guide
This product is intended for installation by a professional
installer only! Attempts to install this product by a person
other than a trained professional may result in severe
damage to a vehicle’s electrical system and components.
© 2014 Directed, Vista, CA
Directed Digital System 2014-12
Contents
Warning! Safety first........................................................................................................................ 3
Introduction..................................................................................................................................... 4
Vehicle application guide............................................................................................................ 4
Understanding the Difference Between an 80 and a 40-Bit Ford............................................................ 6
What does it mean? .................................................................................................................. 6
How do I Differentiate Between the 40 and 80 Bit?........................................................................ 6
Wiring connections.......................................................................................................................... 7
Main power harness (H1), 12-pin thick gauge connector................................................................ 7
Auxiliary output harness (H2), 16-pin black connector ................................................................... 7
Analog harness (H3), 18-pin white connector ............................................................................... 8
MC501 harness (H4), 8 thick-gauge wires (optional)...................................................................... 8
Installation....................................................................................................................................... 9
Type 1a -Vehicle without factory alarm.......................................................................................... 9
Type 1b - Vehicle with factory alarm........................................................................................... 10
Type 2a -Vehicle without factory alarm.............................................................................................. 10
Type 2b - Vehcile with factory alarm........................................................................................... 12
Accesssory 3 relay connections....................................................................................................... 13
Vehicle wiring reference charts........................................................................................................ 13
P.AT.S. connector...................................................................................................................... 13
Ignition Switch............................................................................................................................... 15
Connecting the module................................................................................................................... 32
Important!............................................................................................................................... 33
Manual or automatic transmission selection................................................................................. 33
RF kits..................................................................................................................................... 34
When used in conjunction with SmartStart................................................................................... 34
Module programming .............................................................................................................. 35
2-key programming (Without Key2GO, see page 33 for module programming with Key2GO).......... 35
1-Key programming using Key2GO........................................................................................... 36
LED diagnostics and troubleshooting........................................................................................... 37
Module reset........................................................................................................................... 38
Hard reset............................................................................................................................... 38
Learning the Tach (not needed with Virtual Tach)................................................................................ 39
Initializing Virtual Tach (not needed with hardwired or data tach applications)...................................... 39
Limited lifetime consumer warranty................................................................................................... 40
Quick Reference Guide – Viper, Clifford, Python, Avital & Automate.................................................... 41
Quick Reference Guide – Autostart................................................................................................... 43
Warning! Safety first
The following safety warnings must be observed at all times:
• Due to the complexity of this system, installation of this product must only be performed by an authorized
Directed dealer.
• When properly installed, this system can start the vehicle via a command signal from the remote control.
Therefore, never operate the system in an area that does not have adequate ventilation.
The
•
•
•
following precautions are the sole responsibility of the user; however, authorized Directed dealers should:
Never use a test light or logic probe when installing this unit. Always use a multimeter.
Never operate the system in an enclosed or partially enclosed area without ventilation (such as a garage).
When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the
remote start system must be disabled using the installed toggle switch. It is the user’s sole responsibility to
properly handle and keep out of reach from children all remote controls to assure that the system does not
unintentionally remote start the vehicle.
• USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT
TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR
PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST REMAIN CLOSED AT ALL TIMES.
Use of this product in a manner contrary to its intended mode of operation may result in property damage,
personal injury, or death. Except when performing the Safety Check outlined in this installation guide, (1) Never
remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the
ignition. The user is responsible for having the neutral safety feature of the vehicle periodically checked, wherein
the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized
Directed dealer in accordance with the Safety Check outlined in this product installation guide. If the vehicle
starts in gear, cease remote start operation immediately and consult with the user to fix the problem immediately.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS
INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS
MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. IMMEDIATELY CEASE THE USE OF THE UNIT
AND REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD
RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Remote starters for manual transmission pose significant risks if not properly installed and operated. When testing
to ensure the installation is working properly, only remote start the vehicle in neutral gear, on a flat surface and
with a functional, fully engaged parking brake. Do not allow anyone to stand in front of or behind the vehicle.
This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission.
Installation in such vehicles may pose certain risk.
3
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Introduction
The FORD1 firmware for Directed Digital Systems is a complete solution for remote start,
security (if applicable), bypass interface, and convenience needs compatible with specific
Ford, Lincoln and Mercury vehicles.
Warning! This module can only be programmed via the web tool, which can be found on
www.directechs.com or using the Directechs Mobile application for smartphones. Features
and functions will become accessible when you connect the module using the XKLoader.
Vehicle application guide
4
1
2
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
2
2
1*
1
1
1
1
1
1
1
RS-SmartStart
2
Key2GO
1
2
DL-Disarm Factory Security
2003
1
2
2000
2004
1
2
2001
2005
1
2002
2006
2008
2007
2009
1
2010
1
2011
Ford
Crown Victoria
Edge
Escape
Escape Hybrid
E-Series
Expedition
Explorer
Explorer Sport Trac
F150
F150
F250
F250
F350
F350
F450
F450
Fiesta
Five Hundred
Flex
Focus
Focus
Freestar
Freestyle
Fusion
Fusion
Fusion
GT
Mustang
Mustang (SA Key)
Ranger
Sport Trac
Taurus
Taurus
Taurus X
Thunderbird
Transit Connect
Windstar
2012
2013
Vehicles
PK-Immobilizer Bypass-Data No Key Req'd
The table below lists the vehicles and features which are compatible with this product. Refer to the following
pages for more information on installation wiring, programming and troubleshooting for these vehicles.
2
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
2
2
2
1
1
2
2
2
2
2
2
2
2
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
2
1 or 2
1 or 2
2
1 or 2
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
1
1 or 2
2
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
2
2
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
2
2
2
2
2
1
1
11
10
RS-SmartStart
Key2GO
DL-Disarm Factory
Security
2000
2
1
2
2
2
PK-Immobilizer BypassData No Key Req'd
09 08 07 06 05 04 03 02 01 00
2
2001
10
2
2002
11
1
2003
12
1
2004
13
2
2005
2009
2006
2010
2007
2011
2008
2012
Lincoln
Aviator
LS
Mark LT
MKS
MKX
MKZ
MKZ
Navigator
Navigator
Town Car
Zephyr
Mercury
Grand Marquis
Marauder
Mariner
Mariner Hybrid
Milan
Montego
Monterey
Mountaineer
Mystique
Sable
2013
Vehicles
2
13
12
1
09 08 07 06 05 04 03 02 01 00
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
2
2
2
2
2
2
1
1
Legend:
PK: Transponder & Immobilizer Override
DL: OE Door Lock & Alarm Controls
RS: Remote Start & Engine Controls
5
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Key2GO
This feature is required if only one key is available. You can program the interface without the need for
Key2Go if two keys are present.
Key2GO has been designed and developed to bypass the advanced encryption layers found in modern
vehicles. It uses an array of servers to generate a duplicate of the original key, allowing the installation of a
remote starter without having to give up a key.
The advantage is that this feature allows you to use one original key and the server to configure the bypass in the
vehicle.
All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page
and will also appear on the flash page. Any first-time user must re-register to gain access to Key2GO, and
some additional information will be required to complete the registration process, such as your Directed account
number and store name.
Key2GO is compatible with XpressVIP 4.5 or higher and requires an XKLoader.
Refer to "Module programming" on page 35 of this guide for instructions on how to program features using
Key2GO.
Understanding the Difference Between an 80 and a 40-Bit Ford
Ford introduced an 80-bit encryption in late 2009 and this caused a lot of confusion as to which models it was
available on. The main question is which models use the 80 and which use the 40 bit?
Contrary to popular belief, the SA marking on the key does NOT indicate a vehicle uses 80-bit encryption. The
SA marking indicates that the key is 80-bit compatible, but the vehicle itself could still be using 40-bit encryption.
What does it mean?
It means that Ford did in fact release SA keys capable of 80-bit encryption, but the same transponder can also
be used in vehicles with 40-bit encryption, making it backward compatible with older vehicles. Consequently, if
you see an SA key it is important that you do not automatically assume it is an 80-bit type. It all depends on the
vehicle, not the key.
How do I Differentiate Between the 40 and 80 Bit?
To determine which encryption type you are dealing with, you must test pin 1 at the 4-pin PATS connector at the
key barrel for the following conditions to determine if it is 40 or 80-bit type.
An
•
•
•
80-bit vehicle should provide the following values:
NO key in barrel: 0V
Key in barrel with IGN OFF: (+) 12V
Key in barrel with IGN ON: (+) 12V
An 40-bit vehicle should provide the following values:
• NO key in barrel: 0V
• Key in barrel with IGN OFF: 0V
Key in barrel with IGN ON: (+) 12V
Note: If the key is an 80-bit type, please use FORD6 firmware.
6
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Wiring connections
Your module may come with one of two versions of wiring harnesses. It is clearly indicated in the following
tables which harnesses and wire colors can be different in your installation.
The wiring connections listed below are generic to this firwmare.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin
Color
Description
H1/1
White
Relay 3 COM – Parking Light Output
H1/2
White/Brown
Relay 3 N.O.– Parking Light Input
H1/3
Brown/Red
Relay 2 N.O.– No Connection
H1/4
Yellow/Red
Relay 2 COM –RAP Off
H1/5
Orange/Red
Relay 2 N.C. –RAP Off
H1/6
Yellow
Relay 1 COM – No Connection
H1/7
White
Relay 3 COM – Parking Light Output
H1/8
White/Brown
Relay 3 N.O.– Parking Light Input
H1/9
Black
(-) Ground
H1/10
Red
(+) 12 Volt (Battery)
H1/11
Orange/Yellow
Relay 1 N.C. – No Connection
H1/12
Brown
Relay 1 N.O.– No Connection
1
1
1
1
1
1
1
Auxiliary output harness (H2), 16-pin black connector
Your module may come with one of two versions of wiring harnesses. The column in red is for old wire
colors, and the rows with italicized text indicate where differences may occur.
Conn./Pin
Color (CURRENT Harness) Color (OLD Harness)
Description
H2/1
Violet/Brown
Violet/Brown
No Connection
H2/2
Yellow/Black
Yellow/Black
Data TX
H2/3
Orange/Black
Orange/Black
Data RX
H2/4
Tan
Tan
HS CAN Low
H2/5
Tan/Black
Tan/Black
HS CAN High
H2/6
Light Green
Light Green
No Connection
H2/7
Orange/Green
Orange/Green
No Connection
H2/8
Orange/Brown
Orange/Brown
No Connection
H2/9
Violet/Green
Violet/Green
No Connection
H2/10
Green/Black
Lt. Green/White
No Connection
H2/11
White/Violet
White/Violet
No Connection
H2/12
White/Red
White/Red
No Connection
H2/13
Lt. Blue/Black
Lt. Green/Black
No Connection
H2/14
Green/Red
Green/Red
No Connection
H2/15
N/A
Violet/Red
No Connection
H2/16
Violet/Yellow
Violet/Yellow
No Connection
1.
2.
7
2
2
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are
low current and a relay may be necessary.
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Analog harness (H3), 18-pin white connector
Your module may come with one of two versions of wiring harnesses. The column in red is for old wire
colors, and the rows with italicized text indicate where differences may occur.
Conn./Pin
Color (CURRENT Harness) Color (OLD Harness)
Description
H3/1
Lt. Blue/Red
Lt. Blue/Red
No Connection
H3/2
Black/White
White/Black
(-) Parking Brake Input (Manual Transmission) 2
H3/3
Gray
Gray
(-) Hood Input
H3/4
N/A
Black/White
No Connection
H3/5
Gray/Black
Gray/Black
(+) Glow Plug Input
H3/6
Violet/White
Violet/White
(AC) Tach Input
H3/7
Dark Blue
Dark Blue
(-) Unlock Output
H3/8
Brown/Black
Brown/Black
(-) Horn
H3/9
Red/White
Red/White
(-) Trunk Release Output
H3/10
White/Green
Green/Gray
(-) Door Input 2
H3/11
Yellow/Green
Violet/Gray
(+) Door Input 2
H3/12
Blue/Red
Blue/Red
No Connection
H3/13
Light Blue
Light Blue
(-) Trunk Trigger Input
H3/14
Pink/Yellow
Blue/Black
Start Trigger Input (must be enabled from the web) 1
H3/15
Dark Green
Dark Green
(-) Lock Output
H3/16
Brown/White
Light Brown
(+) Brake Input 2
H3/17
Brown
Brown
(+) Siren Output
H3/18
Blue/White
Blue/White
(-) Ground When Running (Status) Output
2
2
2
1
1
1
2
1
MC501 harness (H4), 8 thick-gauge wires (optional)
Conn./Pin
Color
Description
H4/1
Pink/White
(+) Ignition 2/Flex Relay Output
H4/2
Red/White
(+) Fused (30A) Ignition 2/Flex Relay Input
H4/3
Pink
(+) Ignition Output (Also Input to Yellow in Ribbon Cable)
H4/4
Red
(+) 12 Volt (Battery) Input
H4/5
Orange
(+) Accessory Output
H4/6
Red
(+) 12 Volt (Battery) Input
H4/7
Green
Starter Input (From Key Switch)
H4/8
Violet
(+) Starter Output (To Starter)
1.
2.
3.
4.
8
3
4
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are
low current and a relay may be necessary.
These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide"
on page 4 for a list of compatible features.
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
The Green wire is only required for starter kill and antigrind applications.
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Installation
Type 1a -Vehicle without factory alarm
Refer to "Vehicle wiring reference charts" on page 13 for more information on vehicle-specific connections.For models without a disarm wire, refer to Directwire for
alternative disarm documents.
4
3
2
2
1
HS CAN High, pin 6
1
OBDII connections are used for
DTC code retrieval (OBDCAN)
when SmartStart is used.
These connections may be
skipped if unavailable.
8
9
16
4
3
1
TX
RX
Ground
2
4
3
2
1
4
3
2
1
RX
TX
1
3
1
4
Ground
3
4
2
Ignition
4
Ignition
Manual/Auto.
Manual/Auto. Transmission
Transmission Type
Type
HS CAN Low, pin 14
3
4
4
RX
3
3
TX
2
2
Ground
1
1
Ignition
2
TX Ignition
Orange/Red
Diagnostic Connector OBDII
(connector side view)
RX Ground
1
Prog.
Prog.
Button
Button
TX: Yellow/Black: 2
[1] Starter
(+) 12V Input: Red
(+) 12V Input: Red
MC501
(+) 12V
9: Black: (-) Ground
6: Brown/Red: RAP Off N.O.
5: Orange/Red: RAP Off N.C.
4: Yellow/Red: RAP Off COM
2 & 8: White/Brown: (-) Parking Light Input
1 & 7: White: (-) Parking Light Output
2 Wh
Siren
10: Red: (+) 12V
12 White
Go to www.directechs.com for
more information on
vehicle-specific wiring
connections.
(-) Parking Brake Input: Black/White: 2
[3] (-) Hood Input: Gray: 3
Tach Input: Violet/White: 6
(-) Unlock Output: Dark Blue: 7
[4] (-) Horn: Brown/Black: 8
[4] (-) Trunk Output: Red/White: 9
(-) Door Input: White/Green: 10
(+) Door Input: Yellow/Green: 11
(-) Trunk Input: Light Blue: 13
(-) Lock Output: Dark Green: 15
(+) Brake Input: Brown/White: 16
[2] (+) Siren Output: Brown: 17
18 White
Driver Door
Trigger
(Closed Door Circuit ONLY)
Hood Pin
The Remote Start
Safety Override
Switch MUST be in
the ON position.
4 Red
7 White
(+) Ignition 2/Flex Relay
Output: Pink/White
Remote Start Safety
Override Switch
4 White
3 Wh
(+) Fused (30A) Ignition 2/
Flex Relay Input: Red/White
HS CAN High: Tan/Black: 5
7 White
(+) Ignition Output (also input
to Yellow wire in ribbon
cable): Pink
HS CAN Low: Tan: 4
2 Bk
(+) Accessory Output: Orange
Refer to Vehicle wiring reference
charts for wire and connector
details related to the standard
connections in the vehicle.
6 Green
4 White
Input (from
key switch): Green
RX: Orange/Black: 3
16 Black
(+) Starter Output
(to starter): Violet
Yellow/Red
Passive Anti-Theft Security System
(PATS) connectors (wire-side view)
See the Vehicle Application Guide
on page 6 for more information
8 thick-gauge wires
Type A
Ford Edge
Ford Escape
Ford Escape Hybrid
Ford Expedition
Ford Explorer 2002-11
Ford F150 2009-11
Ford F250
Ford F350
Ford F450
Ford Fiesta
Ford Five Hundred
Ford Flex
Ford Focus 2008-13
Ford Freestar
Ford Freestyle
Ford Fusion
Ford Mustang
Ford Sport Trac
Ford Taurus 2008-12
Ford Taurus X
Ford ThunderBird
Ford Transit Connect
(with power door locks)
Ford Windstar
Lincoln Aviator
Lincoln LS
Lincoln MKS
Lincoln MKX
Lincoln MKZ
Lincoln Navigator 2003-13
Lincoln Zephyr
Mercury Mariner
Mercury Mariner Hybrid
Mercury Milan
Mercury Montego
Mercury Monterey
Mercury
Mountaineer 2002-10
Mercury Sable 2008-09
[1] The
Green wire is only required for starter kill and antigrind connections.
siren is only available with the Directed Digital System remote start and security system.
[3] The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin.
[4] These outputs are configurable by the installer when the module is flashed, and are low current. Use a relay if necessary.
With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
[2] The
While there are 2 possible versions of wiring harnesses, this diagram uses the CURRENT harness. Refer to the Wiring connections section for more information.
9
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Type 1b - Vehicle with factory alarm
Refer to "Vehicle wiring reference charts" on page 13 for more information on vehicle-specific connections.For models without a disarm wire, refer to Directwire for
alternative disarm documents.
Passive Anti-Theft Security System(PATS) connectors (wire-side view)
See the Vehicle Application Guideon pages 13-32 for more information
RX Ground
1
Diagnostic Connector OBDII
(connector side view)
2
HS CAN High, pin 6
1
9
OBDII connections are used for
DTC code retrieval (OBDCAN)
when SmartStart is used.
These connections may be
skipped if unavailable.
8
16
2
1
4
3
1
TX
RX
Ground
2
4
3
2
1
4
3
2
1
RX
TX
1
3
1
4
Ground
3
4
2
Ignition
4
4
4
RX
3
3
TX
2
2
Ground
1
1
Ignition
2
TX Ignition
Manual/Auto.
Manual/Auto. Transmission
Transmission Type
Type
Prog.
Prog.
Button
Button
The Remote Start
Safety Override
Switch MUST be in
the ON position.
TX: Yellow/Black: 2
10: Red: (+) 12V
(+) 12V
9: Black: (-) Ground
12 White
18 White
(-) Ground
6: Yellow: RAP Off
5: Orange/Red: RAP Off N.C.
4: Yellow/Red: RAP Off COM
3: Brown/Red: RAP Off N.C.
2 & 8: White/Brown: (-) Parking Light Input
1 & 7: White: (-) Parking Light Output
2 Wh
Siren
4 Red
7 White
Go to www.directechs.com
for more information on
vehicle-specific wiring
connections.
4 White
3 Wh
Hood Pin
Remote Start Safety
Override Switch
2 Bk
7 White
HS CAN High: Tan/Black: 5
(-) Parking Brake Input: Black/White: 2
[3] (-) Hood Input: Gray: 3
Tach Input: Violet/White: 6
(-) Unlock Output: Dark Blue: 7
[4] (-) Horn: Brown/Black: 8
[4] (-) Trunk Output: Red/White: 9
(-) Door Input: White/Green: 10
(+) Door Input: Yellow/Green: 11
(-) Trunk Input: Light Blue: 13
(-) Lock Output: Dark Green: 15
(+) Brake Input: Brown/White: 16
[2] (+) Siren Output: Brown: 17
6 Green
HS CAN Low: Tan: 4
16 Black
RX: Orange/Black: 3
MC501
Refer to Vehicle wiring reference
charts for wire and connector
details related to the standard
connections in the vehicle.
3
Ignition
4 White
8 thick-gauge wires
HS CAN Low, pin 14
Type B
Ford Crown Victoria
Ford Econoline
Ford E-Series
Ford Explorer 2001
(+) Starter Output
Ford Explorer Sport Trac
(to starter): Violet
Ford F150 2004-08
[1] Starter Input (from
Ford Focus 2000-07
key switch): Green
Ford GT
Ford Ranger
(+) 12V Input: Red
Ford Taurus 2000-07
(+) Accessory Output: Orange
Ford Transit Connect
(+) 12V Input: Red
(with manual door locks)
Lincoln Mark LT
(+) Ignition Output (also input
Lincoln Navigator 2002
to Yellow wire in ribbon
Lincoln Town Car
cable): Pink
Mercury Grand Marquis
(+) Fused (30A) Ignition 2/
Mercury Marauder
Flex Relay Input: Red/White
Mercury Mountaineer 2001
(+) Ignition 2/Flex Relay
Mercury Mystique
Output: Pink/White
Mercury Sable 2000-05
4
3
Driver Door Trigger (Open Door Circuit ONLY)
[1] The
Green wire is only required for starter kill and antigrind connections.
[2] The siren is only available with the Directed Digital System remote start and security system.
[3] The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin.
[4] These outputs are configurable by the installer when the module is flashed, and are low current. Use a relay if necessary.
With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
Refer to Vehicle wiring reference charts for wire and
connector details related to the standard connections
in the vehicle.
While there are 2 possible versions of wiring harnesses, this diagram uses the CURRENT harness. Refer to the Wiring connections section for more information.
10
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Type 2a -Vehicle without factory alarm
Refer to "Vehicle wiring reference charts" on page 13 for more information on vehicle-specific connections.For models without a disarm wire, refer to Directwire for
alternative disarm documents.
RX Ground
4
3
2
2
1
HS CAN High, pin 6
1
8
9
16
OBDII connections are used for
DTC code retrieval (OBDCAN)
when SmartStart is used.
These connections may be
skipped if unavailable.
4
3
1
TX
RX
Ground
2
4
3
2
1
4
3
2
1
RX
TX
1
3
1
4
Ground
3
4
2
Ignition
4
Ignition
Manual/Auto.
Manual/Auto. Transmission
Transmission Type
Type
HS CAN Low, pin 14
3
4
4
RX
3
3
TX
2
2
Ground
1
1
Ignition
2
TX Ignition
Prog.
Prog.
Button
Button
TX: Yellow/Black: 2
[1] Starter
(+) 12V Input: Red
(+) 12V Input: Red
MC501
6: Brown/Red: RAP Off N.O.
5: Orange/Red: RAP Off N.C.
4: Yellow/Red: RAP Off COM
2 & 8: White/Brown: (-) Parking Light Input
1 & 7: White: (-) Parking Light Output
2 Wh
Siren
(+) 12V
9: Black: (-) Ground
12 White
Go to www.directechs.com for
more information on
vehicle-specific wiring
connections.
10: Red: (+) 12V
18 White
Driver Door
Trigger
(Closed Door Circuit ONLY)
Hood Pin
(-) Parking Brake Input: Black/White: 2
[3] (-) Hood Input: Gray: 3
Tach Input: Violet/White: 6
(-) Unlock Output: Dark Blue: 7
[4] (-) Horn: Brown/Black: 8
[4] (-) Trunk Output: Red/White: 9
(-) Door Input: White/Green: 10
(+) Door Input: Yellow/Green: 11
(-) Trunk Input: Light Blue: 13
(-) Lock Output: Dark Green: 15
(+) Brake Input: Brown/White: 16
[2] (+) Siren Output: Brown: 17
The Remote Start
Safety Override
Switch MUST be in
the ON position.
4 Red
7 White
(+) Ignition 2/Flex Relay
Output: Pink/White
Remote Start Safety
Override Switch
4 White
3 Wh
(+) Fused (30A) Ignition 2/
Flex Relay Input: Red/White
HS CAN High: Tan/Black: 5
7 White
(+) Ignition Output (also input
to Yellow wire in ribbon
cable): Pink
HS CAN Low: Tan: 4
2 Bk
(+) Accessory Output: Orange
Refer to Vehicle wiring reference
charts for wire and connector
details related to the standard
connections in the vehicle.
6 Green
4 White
Input (from
key switch): Green
RX: Orange/Black: 3
16 Black
(+) Starter Output
(to starter): Violet
Yellow/Red
1
Orange/Red
Passive Anti-Theft Security System
(PATS) connectors (wire-side view)
See the Vehicle Application Guide
on page 6 for more information
Diagnostic Connector OBDII
(connector side view)
8 thick-gauge wires
Type A
Ford Edge
Ford Escape
Ford Escape Hybrid
Ford Expedition
Ford Explorer 2002-11
Ford F150 2009-11
Ford F250
Ford F350
Ford F450
Ford Fiesta
Ford Five Hundred
Ford Flex
Ford Focus 2008-13
Ford Freestar
Ford Freestyle
Ford Fusion
Ford Mustang
Ford Sport Trac
Ford Taurus 2008-12
Ford Taurus X
Ford ThunderBird
Ford Transit Connect
(with power door locks)
Ford Windstar
Lincoln Aviator
Lincoln LS
Lincoln MKS
Lincoln MKX
Lincoln MKZ
Lincoln Navigator 2003-13
Lincoln Zephyr
Mercury Mariner
Mercury Mariner Hybrid
Mercury Milan
Mercury Montego
Mercury Monterey
Mercury
Mountaineer 2002-10
Mercury Sable 2008-09
[1] The
Green wire is only required for starter kill and antigrind connections.
siren is only available with the Directed Digital System remote start and security system.
[3] The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin.
[4] These outputs are configurable by the installer when the module is flashed, and are low current. Use a relay if necessary.
With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
[2] The
While there are 2 possible versions of wiring harnesses, this diagram uses the CURRENT harness. Refer to the Wiring connections section for more information.
11
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Type 2b - Vehcile with factory alarm
Refer to "Vehicle wiring reference charts" on page 13 for more information on vehicle-specific connections.For models without a disarm wire, refer to Directwire for
alternative disarm documents.
Passive Anti-Theft Security System
(PATS) connectors (wire-side view)
See the Vehicle Application Guide
on page 6 for more information
Diagnostic Connector OBDII
(connector side view)
RX Ground
1
2
HS CAN High, pin 6
1
9
OBDII connections are used for
DTC code retrieval (OBDCAN)
when SmartStart is used.
These connections may be
skipped if unavailable.
8
16
3
TX
RX
1
1
2
TX
3
1
4
Ground
3
4
2
Ignition
Ground
Manual/Auto.
Manual/Auto. Transmission
Transmission Type
Type
4
4
4
RX
3
3
TX
2
2
Ground
1
1
Ignition
2
Prog.
Prog.
Button
Button
TX: Yellow/Black: 2
HS CAN Low: Tan: 4
4 Red
7 White
The Remote Start
Safety Override
Switch MUST be in
the ON position.
4 White
3 Wh
10: Red: (+) 12V
9: Black: (-) Ground
12 White
18 White
(+) 12V
(-) Ground
6: Yellow: RAP Off
5: Orange/Red: RAP Off N.C.
4: Yellow/Red: RAP Off COM
3: Brown/Red: RAP Off N.C.
2 & 8: White/Brown: (-) Parking Light Input
1 & 7: White: (-) Parking Light Output
2 Wh
Go to
www.directechs.com for
more information on
vehicle-specific wiring
connections.
(-) Parking Brake Input: Black/White: 2
[3] (-) Hood Input: Gray: 3
Tach Input: Violet/White: 6
(-) Unlock Output: Dark Blue: 7
[4] (-) Horn: Brown/Black: 8
[4] (-) Trunk Output: Red/White: 9
(-) Door Input: White/Green: 10
(+) Door Input: Yellow/Green: 11
(-) Trunk Input: Light Blue: 13
(-) Lock Output: Dark Green: 15
(+) Brake Input: Brown/White: 16
[2] (+) Siren Output: Brown: 17
Remote Start Safety
Override Switch
2 Bk
7 White
HS CAN High: Tan/Black: 5
Hood Pin
6 Green
MC501
16 Black
4 White
8 thick-gauge wires
RX: Orange/Black: 3
Siren
[1] The
4
2
RX
1
TX Ignition
Refer to Vehicle wiring reference
charts for wire and connector
details related to the standard
connections in the vehicle.
Driver Door Trigger
(Open Door Circuit ONLY)
3
4
3
2
1
Ignition
HS CAN Low, pin 14
Type B
Ford Crown Victoria
Ford Econoline
Ford E-Series
(+) Starter Output
Ford Explorer 2001
(to starter): Violet
Ford Explorer Sport Trac
[1]
Starter
Input (from
Ford F150 2004-08
key switch): Green
Ford Focus 2000-07
Ford GT
(+) 12V Input: Red
Ford Ranger
(+) Accessory Output: Orange
Ford Taurus 2000-07
(+) 12V Input: Red
Ford Transit Connect
(with manual door locks)
(+) Ignition Output (also input
Lincoln Mark LT
to Yellow wire in ribbon
Lincoln Navigator 2002
cable): Pink
Lincoln Town Car
(+) Fused (30A) Ignition 2/
Mercury Grand Marquis
Flex Relay Input: Red/White
Mercury Marauder
(+) Ignition 2/Flex Relay
Mercury Mountaineer 2001
Output: Pink/White
Mercury Mystique
Mercury Sable 2000-05
4
4
3
2
1
3
Green wire is only required for starter kill and antigrind connections.
Refer to Vehicle wiring reference charts for wire and
connector details related to the standard connections
in the vehicle.
siren is only available with the Directed Digital System remote start and security system.
installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin.
[4] These outputs are configurable by the installer when the module is flashed, and are low current. Use a relay if necessary.
With the exception of the OBDII diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
[2] The
[3] The
While there are 2 possible versions of wiring harnesses, this diagram uses the CURRENT harness. Refer to the Wiring connections section for more information.
12
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Accesssory 3 relay connections
If the vehicle on which you are performing an installation requires the Accessory 3 wire, you must install a relay.
(+) 12V
87
(+) Accessory 1
(from remote starter)
(-) Active While
Running (status)
87a
85
30
86
(+) Accessory 3 (in vehicle)
Vehicle wiring reference charts
This section provides information on the following connections:
• "P.AT.S. connector"
• "Ignition Switch"
Refer to www.directechs.com for more information on any additional connections.
P.AT.S. connector
RX Ground
1
4
3
2
2
4
3
1
TX
RX
Ground
2
4
3
2
1
1
4
3
2
1
RX
TX
1
3
1
4
Ground
3
4
2
Ignition
4
Ignition
Vehicles
3
4
4
RX
3
3
TX
2
2
Ground
1
1
Ignition
2
TX Ignition
Years
PATS connector
Type
RX
Pin
TX
Pin
Ford
Crown Victoria
2005-2011
4
Gray/Orange
4
White/Lt. Green
3
Crown Victoria
2003-2004
4
Gray/Orange
3
White/Lt. Green
4
Econoline
2009-2012
3
Violet/Gray
3
Yellow/Orange
4
Econoline
2008
3
Gray/Orange
3
White/Lt.Green
4
Edge
2011-2013
4
Violet/Gray
4
Yellow/Orange
3
Edge
2007-2010
4
Yellow/Orange
4
Violet/Gray
3
Escape
2008-2012
4
Violet/Gray
4
Yellow/Orange
3
Escape
2001-2007
2
Red/Black
4
Brown/Orange
3
Escape Hybrid
2008-2012
4
Violet/Gray
4
Yellow/Orange
3
Escape Hybrid
2005-2007
2
Red/Black
4
Brown/Orange
3
E-Series
2009-2012
3
Violet/Gray
3
Yellow/Orange
4
E-Series
2008
3
Gray/Orange
3
White/Lt. Green
4
Excursion
2004-2005
3
Gray/Orange
3
White/Lt. Green
4
Excursion
2002-2003
1
Gray/Orange
3
White/Lt. Green
4
Expedition
2007-2011
4
Blue/Gray
4
Violet/Brown
3
13
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Vehicles
Years
PATS connector
Type
RX
Pin
TX
Pin
Ford
Expedition
2003-2006
2
Gray/Orange
4
White/Lt. Green
3
Explorer
2011
4
Violet/Red
4
Yellow/Orange
3
Explorer
2006-2010
4
Violet/Gray
4
Yellow/Orange
3
Explorer
2002-2005
2
Gray/Orange
4
White/Lt. Green
3
Explorer
2001
1
Gray/Orange
3
White/Lt. Green
4
Explorer Sport Trac
2001-2005
2
Gray/Orange
3
White/Lt. Green
4
F150
2011
4
Violet/Gray
4
Yellow/Orange
3
F150
2009-2010
4
Gray/Orange
4
Violet/Gray
3
F150
2004-2008
2
Yellow/Orange
4
White/Lt. Green
3
F250
2011
4
Violet/Gray
4
Yellow/Orange
3
F250
2008-2010
4
Violet/Gray
4
Yellow/Orange
3
F350
2011
4
Violet/Gray
4
Yellow/Orange
3
F350
2008-2010
4
Violet/Gray
4
Yellow/Orange
3
F450
2011
4
Violet/Gray
4
Yellow/Orange
3
F450
2008-2010
4
Violet/Gray
4
Yellow/Orange
3
Fiesta
2011-2013
4
Violet/Gray
4
Yellow/Orange
3
Five Hundred
2005-2007
4
Gray/Orange
4
White/Lt. Green
3
Flex
2009-2010
4
Violet/Gray
4
Yellow/Orange
3
Focus
2012
4
Violet/Gray
4
Yellow/Orange
3
Focus
2008-2012
4
Yellow/Orange
4
Violet/Gray
3
Focus
2000-2007
2
White/Green
4
Gray/Orange
3
Freestar
2004-2007
3
Gray/Orange
3
White/Lt. Green
4
Freestyle
2005-2007
4
Gray/Orange
4
White/Lt. Green
3
Fusion
2010-2012
4
Yellow/Orange
4
Violet/Gray
3
Fusion
2006-2009
4
Violet/Gray
4
Yellow/Orange
3
GT
2005-2006
2
Brown/Orange
4
White/Orange
3
Mustang
2010-2012
4
Yellow/Orange
4
Violet/Gray
3
Mustang
2005-2009
4
Gray/Orange
4
White/Lt. Green
3
Ranger
2007-2012
3
Blue/Gray
3
Violet/Brown
4
Ranger
2005-2006
3
Gray/Orange
3
White/Lt. Green
4
Ranger
2001-2004
3
Gray/Orange
3
White/Lt. Green
4
Sport Trac
2007-2010
4
Violet/Gray
4
Yellow/Orange
3
Taurus
2010-2012
4
Yellow/Orange
4
Violet/Gray
3
Taurus
2008-2009
4
Violet/Gray
4
Yellow/Orange
3
Taurus
2006-2007
3
Gray/Orange
3
White/Lt. Green
4
Taurus
2002-2005
3
Gray/Orange or
Brown/Yellow
3
White/Lt. Green or
Gray/Red
4
Taurus
2000-2001
3
Red/Black
3
Brown/Orange
4
Taurus X
2008-2009
4
Violet/Gray
4
Yellow/Orange
3
Thunderbird
2002-2005
2
Gray/Red
4
White/Red
3
Transit Connect
2010-2011
4
White/Green
4
Gray/Orange
3
Ford
14
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Vehicles
Years
PATS connector
Type
RX
Pin
TX
Pin
Ford
Windstar
2002-2003
3
Gray/Orange
3
White/Lt. Green
4
Windstar
2001
1
Gray/Orange
3
White/Lt. Green
4
Aviator
2003-2005
2
Gray/Orange
4
White/Lt. Green
3
LS
2000-2006
2
Gray/Red
4
White/Red
3
Mark LT
2006-2008
2
Gray/Orange
4
White/Lt. Green
3
MKS
2009-2012
4
Yellow/Orange
4
Violet/Gray
3
MKX
2007-2010
4
Yellow/Orange
4
Violet/Gray
3
MKZ
2010-2012
4
Yellow/Orange
4
Violet/Gray
3
MKZ
2007-2009
4
Violet/Gray
4
Yellow/Orange
3
Navigator
2007-2012
4
Blue/Gray
4
Violet/Brown
3
Navigator
2003-2006
2
Gray/Orange
4
White/Lt. Green
3
Navigator
2002
1
Gray/Orange
4
White/Lt. Green
3
Town Car
2005-2011
4
Gray/Orange
4
White/Lt. Green
3
Town Car
2003-2004
3
Gray/Orange
3
White/Lt. Green
4
Zephyr
2006
4
Yellow/Orange
4
Violet/Gray
3
Grand Marquis
2005-2010
4
Gray/Orange
4
White/Lt. Green
3
Grand Marquis
2003-2004
3
Gray/Orange
3
White/Lt. Green
4
Marauder
2003-2004
3
Gray/Orange
3
White/Lt. Green
4
Mariner
2008-2010
4
Violet/Gray
4
Yellow/Orange
3
Mariner
2005-2007
2
Red/Black
4
Brown/Orange
3
Mariner Hybrid
2008-2010
4
Violet/Gray
4
Yellow/Orange
3
Mariner Hybrid
2006-2007
2
Red/Black
4
Brown/Orange
3
Milan
2010
4
Yellow/Orange
4
Violet/Gray
3
Milan
2006-2009
4
Violet/Gray
4
Yellow/Orange
3
Montego
2005-2007
4
Gray/Orange
4
White/Lt. Green
3
Monterey
2004-2007
3
Gray/Orange
3
White/Lt. Green
4
Mountaineer
2006-2010
4
Violet/Gray
4
Yellow/Orange
3
Mountaineer
2002-2005
2
Gray/Orange
4
White/Lt. Green
3
Mountaineer
2001
1
Gray/Orange
3
White/Lt. Green
4
Mystique
2000
2
White/Green
4
Gray/Orange
3
Sable
2008-2009
1
Violet/Gray
4
Yellow/Orange
3
Sable
2002-2005
1
Gray/Orange or
Brown/Yellow
3
White/Lt. Green or
Gray/Red
4
Sable
2000-2001
1
Red/Black
3
Brown/Orange
4
Lincoln
Mercury
15
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ignition Switch
* This wire must be programmed for accessory.
Ford Crown Victoria 2005-2011
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Lt. Green/Violet, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Dark Green, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
Violet/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Gray/Yellow, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
White/Violet, pin 5
Ford Crown Victoria 2003-2004
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Lt. Green, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
White/Yellow, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Pink/Black, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Function
Ford Econoline 2009-2012
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Blue/Red or Green/Red, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
Blue/White, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Brown/Yellow, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Violet/Green, pin 3
Function
Ford Econoline 2008
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Lt. Green/Violet, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
White/Pink, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
Pink/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Gray/Yellow, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Black/Lt. Green, pin 3
Function
Ford Edge 2007-2010
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
16
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Escape 2008-2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Ford Escape 2001-2007
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Tan/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 32 pins
Violet/Orange, pin 5
Function
Ford Escape Hybrid 2008-2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Ford Escape Hybrid 2005-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Tan/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 32 pins
Violet/Orange, pin 5
Ford E-Series 2009-2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Blue/Red or Green/Red, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
Blue/White, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Brown/Yellow, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Violet/Green, pin 3
17
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford E-Series 2008
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Lt. Green/Violet, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
White/Pink, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
Pink/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Gray/Yellow, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Black/Lt. Green, pin 3
Function
Ford Excursion 2002-2005
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Yellow, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Dark Green, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Red/Lt. Green or White/Yellow,
pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A4
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Red/Black, pin A3
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Dk. Blue/Lt. Green, pin A1
Ford Expedition 2007-2011
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Blue/Red, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Blue/Red, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Brown/Yellow, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
Ford Expedition 2003-2006
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Red/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Dk. Blue/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Brown/Yellow, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Function
Ford Explorer 2011-2013
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Green/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Function
18
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Explorer 2006-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Violet/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Ford Explorer 2002-2005
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Yellow, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Red, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Red/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Dk. Green/Lt. Green, pin 6
Function
Ford Explorer 2001
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Yellow, pin B2
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Lt. Green/Violet, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Gray/Yellow, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Ford Explorer Sport Trac 2004-2005
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Red, pin B2
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, Pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Lt. Green/Violet, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Pink/Violet, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Brown, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Gray/Yellow, pin A1
Function
Ford Explorer Sport Trac 2001-2003
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Yellow, pin B2
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Lt. Green/Violet, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Pink/Black or Brown, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Brown, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
19
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford F150 2011
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Green/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 26 pins
Blue/Orange, pin 2
Ford F150 2009-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Violet/Red, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Blue/White, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Violet/Green, pin 5
Ford F150 2004-2008
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Red/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Dk. Blue/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Ford F250 2011
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red or Green/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Green 26 pins
Blue/Orange, pin 2
Function
Ford F250 2008-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Blue/Red or White/Violet, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Blue/White, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Brown/Yellow or Yellow/
Orange, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
Violet/Green, pin 5
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
20
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford F350 2011
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red or Green/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Green 26 pins
Blue/Orange, pin 2
Function
Ford F350 2008-2010
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Blue/Red or White/Violet, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Blue/White, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Brown/Yellow or Yellow/
Orange, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
Violet/Green, pin 5
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
Ford F450 2011
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red or Green/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray,pin 3
BCM, Green 26 pins
Blue/Orange, pin 2
Ford F450 2008-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Blue/Red or White/Violet, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Blue/White, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Brown/Yellow or Yellow/
Orange, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
Violet/Green, pin 5
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Ford Fiesta 2011-2013
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Brown/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Blue 24 pins
Blue/Orange, pin 12
Function
21
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Five Hundred 2005-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Dk. Green, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Gray/Yellow, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Violet/Orange, pin 6
Ford Flex 2009-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Ford Focus 2008-2011
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Brown/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
Ford Focus 2000-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Gray/Black, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Green/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Yellow, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Blue 23 pins
Black/Yellow, pin 21
Ford Freestar 2004-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Lt. Green/Violet, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
Dk. Green, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
White/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Violet/Orange, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Black/Lt. Green, pin 3
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 52 pins
Violet/Orange, pin 15
22
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Freestyle 2005-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Dk. Green, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Gray/Yellow, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Violet/Orange, pin 6
Ford Fusion 2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Ford Fusion 2006-2011
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Brown/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Blue/Orange, pin 27
Function
Ford GT 2005-2006
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Starter switch, Black 2 pins
Pink, pin 1
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 32 pins
Violet/Orange, pin 5
Function
Ford Mustang 2010-2012
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Gray/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
23
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Mustang 2005-2009
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Dk. Green, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Pink, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 52 pins
Violet/Orange, pin 15
Function
Ford Ranger 2007-2012
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Red, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
Blue/White, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Brown/Yellow, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Violet/Green, pin 3
Function
Ford Ranger 2005-2006
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 13 pins
Yellow, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Black 13 pins
Red/Lt. Blue, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 13 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 13 pins
Gray/Yellow, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 13 pins
Black/Lt. Green, pin 3
Ford Ranger 2001-2004
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Yellow, pin B2
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Lt. Green/Violet, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A4
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Function
Ford Sport Trac 2007-2010
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Violet/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Function
24
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Taurus 2010-2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Ford Taurus 2008-2009
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Ford Taurus 2006-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 13 pins
Lt. Green/Violet, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Black 13 pins
Red/Lt. Blue, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 13 pins
Red/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 13 pins
Gray/Yellow, pin 8
Door Trigger
White18-pin
Gray, pin 3
BCM, White 26 pins
Tan/Lt. Green, pin 17
Ford Taurus 2000-2005
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Lt. Green/Violet, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Red/Lt. Green, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A4
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Door Trigger
White18-pin
Gray, pin 3
BCM, White 26 pins
Tan/Lt. Green, pin 17
Ford Taurus X 2008-2009
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
25
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Ford Thunderbird 2002-2005
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 8 pins
Red, pin 7
(+) Start
Relay Pack
Violet
Ignition switch, Black 8 pins
Gray/Black, pin 3
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 8 pins
Green/Black, pin 5
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 8 pins
Pink/White, pin 2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 8 pins
Pink/Yellow, pin 6
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 8 pins
Yellow, pin 4
Door Trigger
White18-pin
BCM, Black 12 pins
White, pin 3
Function
Gray, pin 3
Ford Transit Connect 2010-2011
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Gray/Black, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Green/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Yellow, pin 6
Ford Windstar 2001-2003
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Red, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Dk. Green, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
White/Yellow, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Yellow, pin A3
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 12 pins
Violet/Orange, pin 3
Lincoln Aviator 2003-2005
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Yellow, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Dk. Green, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Red/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Gray/Yellow, pin A8
Door Trigger
White18-pin
Gray, pin 3
Driver kick panel
Tan/Lt. Green
Function
26
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Lincoln LS 2000-2006
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 8 pins
Red, pin 7
(+) Start
Relay Pack
Violet
Ignition switch, Black 8 pins
Gray/Black, pin 3
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 8 pins
Green/Black, pin 5
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 8 pins
Pink/White, pin 2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 8 pins
Pink/Yellow, pin 6
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 8 pins
Yellow, pin 4
Door Trigger
White18-pin
BCM, Black 12 pins
White, pin 3
Function
Gray, pin 3
Lincoln Mark LT 2006-2008
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, Pin 3
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Red/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Dk. Blue/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Function
Lincoln MKS 2009-2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Hood Pin
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Lincoln MKX 2007-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Lincoln MKZ 2010-2012
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
27
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Lincoln MKZ 2007-2009
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Brown/Red, pn 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Blue/Orange, pin 27
Function
Lincoln Navigator 2007-2012
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Blue/Red, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Blue/White, pn 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Brown/Yellow, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
Violet/Green, pin 5
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
Lincoln Navigator 2002-2006
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Red/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Dk. Blue/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Lincoln Town Car 2005-2011
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Lt. Green/Violet or Red, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Dk. Green, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
Violet/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Gray/Yellow, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
White/Violet, pin 5
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 16 pins
Violet/Orange, pin 2
Function
Lincoln Town Car 2003-2004
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Yellow, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
White/Yellow, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A4
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Pink/Black, pin A2
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Door Trigger
White18-pin
BCM, White 16 pins
Violet/Orange, pin 2
28
Gray, pin 3
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Lincoln Zephyr 2006
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Brown/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Blue/Orange, pin 27
Mercury Grand Marquis 2005-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 10 pins
Lt. Green/Violet, pin 9
(+) Start
Relay Pack
Violet
Ignition switch, Gray 10 pins
Dk. Green, pin 10
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 10 pins
Violet/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 10 pins
Gray/Yellow, pin 7
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 10 pins
White/Violet, pin 5
Mercury Grand Marquis 2003-2004
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Lt. Green, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
White/Yellow, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Pink/Black, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Function
Mercury Marauder 2003-2004
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Lt. Green, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
White/Yellow, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Pink/Black, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Function
Mercury Mariner 2008-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
29
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Mercury Mariner 2005-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Tan/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 32 pins
Violet/Orange, pin 5
Mercury Mariner Hybrid 2008-2010
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Mercury Mariner Hybrid 2006-2007
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Tan/Lt. Blue, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Black/Lt. Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 32 pins
Violet/Orange, pin 5
Mercury Milan 2010
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Blue/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Function
Mercury Milan 2006-2009
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Brown/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Blue/Orange, pin 27
Function
30
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Mercury Montego 2005-2007
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Dk. Green, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Lt. Green/Violet, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Gray/Yellow, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Brown 32 pins
Violet/Orange, pin 6
Function
Mercury Monterey 2004-2007
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Gray 13 pins
Lt. Green/Violet, pin 2
(+) Start
Relay Pack
Violet
Ignition switch, Gray 13 pins
Dk. Green, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Gray 13 pins
White/Yellow, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Gray 13 pins
Violet/Orange, pin 8
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Gray 13 pins
Black/Lt. Green, pin 3
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 52 pins
Violet/Orange, pin 15
Function
Mercury Mountaineer 2006-2010
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Violet/Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Function
Mercury Mountaineer 2002-2005
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Yellow, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Red, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
Red/Lt. Green, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Dk. Green/Lt. Green, pin 6
Function
Mercury Mountaineer 2001
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Yellow, pin B2
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Lt. Green/Violet, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A2
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Pink/Black, pin A4
(+) Accessory 3
See relay connection on page 13
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
31
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Mercury Mystique 2000
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 8 pins
Red, pin 1
(+) Start
Relay Pack
Violet
Ignition switch, Black 8 pins
Gray/White, pin 5
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 8 pins
Green, pin 4
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 8 pins
Yellow, pin 8
Function
Mercury Sable 2008-2009
Function
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 7 pins
Red, pin 4
(+) Start
Relay Pack
Violet
Ignition switch, Black 7 pins
Blue/White, pin 7
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 7 pins
White/Orange, pin 1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 7 pins
Violet/Green, pin 6
Door Trigger
White18-pin
Gray, pin 3
BCM, Black 26 pins
Blue/Orange, pin 10
Mercury Sable 2000-2005
Directed Digital System
Vehicle
Connector
Wire
Connector
Wire
(+) 12V
White12-pin
Red, pin 3
Ignition switch, Black 15 pins
Lt. Green/Violet, pin B3
(+) Start
Relay Pack
Violet
Ignition switch, Black 15 pins
Red/Lt. Blue, pin STA
(+) Ignition
Relay Pack
Pink
Ignition switch, Black 15 pins
Red/Lt. Green, pin I1
(+) Accessory 1
Relay Pack
Orange
Ignition switch, Black 15 pins
Gray/Yellow, pin A4
(+) Accessory 2*
Relay Pack
Pink/White
Ignition switch, Black 15 pins
Black/Lt. Green, pin A1
Door Trigger
White18-pin
Gray, pin 3
BCM, White 26 pins
Tan/Lt. Green, pin 17
Function
32
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Connecting the module
Important!
Before connecting the Directed Digital System, it is important to ensure that the proper feature and function
programming is selected using the configuration wizard. Visit www.directechs.com to use the latest version of
the online tool.
To make this selection:
1. Disconnect the main module from any (+)12V power source, then connect it to your computer using the
XKLoader.
2. Open the Internet Explorer browser (version 6.0 and later) and go to www.directechs.com; the
programming window will be displayed automatically.
3. Follow the instructions in the pop up window that will be displayed when the module is detected.
Note: If the latest firmware is already loaded, only the feature options will be flashed. Check the Yes box if
you wish to flash the firmware as well.
Once the module is programmed, you can proceed with the instructions below.
Manual or automatic transmission selection
The yellow loop on the Directed Digital System controls which transmission type the unit is configured for. The
state of the loop (uncut or cut) when the main module is powered up will determine which type is selected.
• Uncut (default): Manual transmission.
• Cut: Automatic transmission.
For safety reasons, all Directed Digital Systems are shipped ready to use with a manual transmission (the
yellow loop is untouched). If the loop is cut after power has been applied, it is necessary to cycle power to the
main module (via the white 12-pin main power harness) so the unit will see the state change on the loop and
appropriately configure the transmission type.
Ready mode
To successfully remote start a vehicle equipped with a manual transmission, the Ready Mode feature must be
enabled before exiting the vehicle. Please refer to the Owner’s Guide for more details on this required process.
Additional connections required for vehicles equipped with a manual transmission (if not supported by firmware)
Connection
Description
(-) Emergency Brake Input
(black/white, pin 2)
Must be connected to a working emergency brake in the vehicle. Although most vehicles have simple
(-) trigger emergency brake circuits note some vehicles do not and may require unique integration
methodologies.
(-) Door Input (white/green,
pin 10) OR (+) Door Input
(yellow/green, pin 11)
Must be connected to a working door trigger in the vehicle, which monitors all doors. The unit must monitor
the door pins to allow the Ready Mode process to be enabled.
Note: Some vehicles may require unique integration methodologies for this circuit.
(AC) Tachometer Input
(violet/white, pin 6)
Must be connected to a working tachometer signal in the vehicle (fuel injector, ignition coil, true tach, etc.)
and learned successfully to the Directed Digital System.
Note: Refer to www.directechs.com for more information.
33
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Optional sensors
Note: The sensor port is only active on hybrid systems.
The
•
•
•
4-pin sensor port is compatible with a number of different Directed sensors including, but not limited to:
Shock Sensor – 504D
Field Disturbance Sensor – 508D
Ultrasonic Sensor – 509U
Note: In the case of 508D, power and ground must be hardwired to the vehicle – power and ground should
NOT be obtained from the 4-pin sensor port.
Each sensor will have its own instructions, which must be followed for installation and adjustment.
RF kits
An RF kit consists of one or multiple remotes, a Control Center (antenna), and an antenna cable – various
combinations exist. An RF kit allows the vehicle owner to control the system with enhanced range. Two-way
models are available. Please follow the instructions included with the kit for appropriate installation and
programming information.
When flashing the Directed Digital System, make sure to pick the remote you will be using. This way the main
module will have the necessary firmware to interact with the remote and Control Center (antenna) combination.
When used in conjunction with SmartStart
The Directed Digital System main module must be disconnected from any power source before SmartStart can be
connected to it. Failing to do so could damage main module.
To ensure that the D2D communication between the Directed Digital System and SmartStart works properly, one
of the following actions must be executed, depending on the hardware you are using:
• Rev A SmartStart – The brown or blue loop must be cut.
• Rev B SmartStart – The gray wire must be connected to a ground source.
Do NOT connect the SmartStart 2-pin power harness. Power and ground will be provided by the D2D connector
on main module.
34
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Module programming
2-key programming (Without Key2GO, see page 33 for module programming with Key2GO)
Refer to "LED diagnostics and troubleshooting" on page 37 for more information and for troubleshooting
purposes.
To connect the module:
1
Please ensure that the vehicle is in a safe location an
cannot move forward during programming. For vehicles
equipped with a manual transmission, make sure the
gearshift lever is in the neutral position.
Connect all but the
white 12-pin harness
2
Connect all the harnesses to the Directed Digital
System, EXCEPT the white12-pin main power harness.
3
Connect the white12-pin main power harness, and wait
until the LED turns ON solid red.
4
Insert the first key and turn it to the ONKeyposition,
wait
OUT
START
at least 3 seconds but no more than 10 seconds, then
remove it.
&
Solid Green
Off
Release
8
Pair remotes (if applicable). For information on how to
pair a specific remote, please refer to its corresponding
owner documentation, which can be found inside the
product packaging of the complete system or on www.
directechs.com.*
By default, the tachometer is preprogrammed for the
vehicle. For instructions on how to program tach, refer
to the Analog Installation Guide, which can be found
on www.directechs.com.
* Your aftermarket remote may differ from the model shown in the illustrations.
9
35
N
OFF
OFF
N
O
N
OFF
O
N
O
START
START
&
O
OFF
O
OFF
N
START
Pair
remotes*
Initialize
tachometer
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
K
START
N
OFF
Key IN
O
N
N
OFF
START
Key IN
Key
START
Flashes Orange
Key IN
O
O
N
Key IN Key OUT
O
&
Key
START
Key IN
START
O
START
OFF
Key IN
O
START
START
Press & Hold
N
OFF
N
O
OFF
N
O
N
O
OFF
OFF
N
O
Key IN Key OUT
START
Key out after 3-10 sec.
N
Key IN
Key IN Key OUT
START
OFF
Key at ON
2nd
&
Key IN
START
OFF
START
START
Key out after 3-10 sec.
OFF
N
START
O
Key IN
OFF
2nd
&
N
OFF
N
O
OFF
N
O
N
OFF
Key at ON
O
O
Release the programming button.
1st
Key IN Key OUT
START
Key IN
O
Key IN
N
7
1st
Key IN
START
O
OFF
6
START than 10 START
Wait for at least 3 seconds, but no more
seconds, and press and hold the programming button.
The vehicle ignition turns ON. The LED turns ON solid
green for 3 seconds, then turns OFF once the module
has been successfully programmed.
Solid
Key IN
N
O
OFF
OFF
OFF
O
N
O
N
Insert the second key and turn it to the ON position,
START
Key OUT
wait at least 3 seconds but
no more thanKey
10IN seconds
START
START
then remove it. The LED now flashes orange, otherwise
repeat steps 5 and 6. Key OUT
Key IN
&
OFF
OFF
O
OFF
N
Key OUT
5
N
Must be connected LAST
START
K
1-Key programming using Key2GO
Refer to "LED diagnostics and troubleshooting" on page 37 for more information and for troubleshooting
purposes.
Important! Make sure all doors are closed on the vehicle before executing the programming sequence.
To connect the module:
1
Please ensure that the vehicle is in a safe location an cannot move
forward during programming. For vehicles equipped with a manual
transmission, make sure the gearshift lever is in the neutral position.
Connect all but the
white 12-pin harness
2
Connect all the harnesses to the Directed Digital System, EXCEPT the
white12-pin main power harness.
3
Connect the white12-pin main power harness, and wait until the LED
turns ON solid red.
4
IN
Keytwice.
OUT
Insert the key and turn the ignition ON and OFF
The LEDKey
now
START
flashes orange.
5
Key IN
Key OUTit to your computer.
Remove the module from the vehicle and reconnect
START
The Directechs web site will automatically recognize that you are
moving on to the second phase of the programming sequence.
6
Select the method and click on Submit Key2GO Request.
7
Once the configuration is completed, reconnect the unit to the vehicle.
The LED then turns ON solid green for 3 seconds.
OFF
START
OFF
START
START
10
By default, the tachometer is preprogrammed for the vehicle. For
instructions on how to program tach, refer to the Analog Installation
Guide, which can be found on www.directechs.com.
Pair
remotes*
Initialize
tachometer
* Your aftermarket remote may differ from the model shown in the illustrations.
Important! If connected to a SmartStart, please ensure that its Gray wire is connected to a ground source or
the D2D communication between the two (2) modules will NOT work.
36
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
OFF
Key IN
N
OFF
START
O
9
Pair remotes (if applicable). For information on how to pair a specific
remote, please refer to its corresponding owner documentation, which
can be found inside the product packaging of the complete system or
on www.directechs.com.*
N
Solid 3 sec.
O
Turn vehicle ignition OFF once the module is successfully programmed.
N
O
Key IN
N
Key IN
OFF
Flashes Orange
Key OUT
8
N
&
O
OFF
N
O
N
START
Key IN
START
O
OFF
N
OFF
Key IN
Key
KeyOUT
IN
START
O
N
2x
O
OFF
Solid
O
OFF
&
O
N
Must be connected LAST
START
LED diagnostics and troubleshooting
This section provides LED diagnostics and troubleshooting information to guide you through the various stages of
your installation.
• "Module programming"
• "Module programming - Error codes"
• "External module synchronization"
• "Shutdown codes"
• "Active ground while running (status)"
• "External commands"
Module programming
LED
Description
Troubleshooting
Comment
Module successfully
programmed.
Normal operation.
Normal operation.
Flashes orange
Successful bypass
programming
sequence.
Two keys have been detected (Key2Go,
Ignition has been turn ON and OFF twice).
Normal operation, waiting for final step of
programming.
Solid red
Waiting to begin the
programming
sequence.
Make sure that all the connections are correct
Normal operation.
(see wiring diagram)
Solid greem
x 3 sec.
Module programming - Error codes
LED
Flashes red x 4
Description
Bypass processing
error.
Troubleshooting
Comment
Bypass calculation failed. Reset the module
and try again.
Might be caused by a bad reading in the first
programming attempt or by an unknown bypass
value. If a second attempt fails, connect the
module to Directechs and call Tech Support with
the module ID in hand.
Troubleshooting
Comment
Diagnostic data bus not detected.
Some features are not supported by SmartStart.
This can be caused by missing wire connections
or module hardware limitation. Refer to the wiring
installation section to check the connections.
External module synchronization
LED
(Flashes red,
red, then
orange) x 10
Description
OBDII feature not
supported.
Active ground when running (status)
LED
Description
Troubleshooting
Comment
Used to ensure the module has received the
remote start message and has enabled the
remote start runtime.
Commands can come from RF or D2D
Flashes green
GWR (Status)
command received.
IGNITION ON
command received.
Used to ensure the module received the
ignition command.
START ON command
received.
Used to ensure the module received the
ignition command.
Flashes red &
orange
Flashes green
quickly
37
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
External commands
LED
Description
Flashes orange
x1
Flashes orange
x2
Flashes orange
x3
Troubleshooting
Comment
If the bypass module fails to flash, it means
the module did not receive the signal.
Commands can come from RF or D2D.
LOCK command
received.
UNLOCK command
received.
TRUNK command
received.
Module reset
A module reset will only erase the steps perfomed in "Module programming" on page 35. All settings
(firmware) and settings flashed to the module using the web configuration tool will not be affected.
1
2
5th
If required for your installation, connect both black16-pin and white18-pin
harnesses, as well as the white 7-pin harness to the module. Press and
hold the programming button, then connect the white 12-pin harness to the
module.
Wait 3 seconds until the LED turns ON solid orange then release the
programming button. The LED turns ON solid red.
4th
1st
&
Solid
3rd
2rd
&
Solid
Release
Hard reset
Warning Against Executing a Hard Reset!
A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some
settings may need to be reconfigured. Connect your module to a computer and use the web configuration tool to
edit its programmable features.
1
2
3
5th
If required for your installation, connect both black16-pin and white18-pin
harnesses, as well as the white 7-pin harness to the module. Press and
hold the programming button, then connect the white 12-pin harness to the
module.
After 3 seconds the LED turns ON solid orange. Keep holding the
programming button until the LED flashes red, then orange slowly.
4th
1st
&
Solid
2rd
&
Hold
Release the programming button. The LED turns ON solid red.
Flashes
&
Release
38
3rd
Solid
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Learning the Tach (not needed with Virtual Tach)
Tach comes preprogrammed, therefore learning is not required; however, it can be readjusted with the following
operations:
1. Start the vehicle using the key.
2. Within 5 seconds, press and hold the Control Center* (antenna) or the main module programming button,
until the LED on the Control Center (antenna) or the main module turns ON soild.
3. Release the button. Tachometer value is now stored in memory.
If the LED does not turn ON solid, find an alternate tach source.
* If the Control Center (antenna) was not included in your kit, the tach can be programmed using the
programming button directly on the main module.
Note: When the tachometer is programmed, the main module automatically enters the Tachometer engine
checking mode.
Initializing Virtual Tach (not needed with hardwired or data tach applications)
To program Virtual Tach:
1. After the install is complete, remote start the engine. The programming operation may require 3 cranks of
the starter before the engine starts and runs. Do not turn off the remote start if this happens, it is a normal
programming operation.
2. Once the engine begins running, let it run for at least 30 seconds.
3. Using the Remote, send the Remote start command to turn remote start off. Virtual Tach is programmed. To
reset Virtual Tach, a module reset must be done.
Note: Virtual Tach cannot be used in Manual Transmission Mode. It is also not recommended for diesel trucks.
Virtual Tach handles disengaging the starter motor during remote starting – it does not address over-rev. If the
customer wants to have the over-rev protection capability, the tach wire or data tach must be used.
Important! After successfully learning Virtual Tach, a small minority of vehicle starters may over crank or under
crank during remote start. Use the VirtualTach Fine tune feature in the configuration wizard to adjust the starter
output time in 50mS increments to compensate for such an occurrence.
39
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Limited lifetime consumer warranty
Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable
reconditioned model any Directed unit (hereafter the “unit”), excluding without limitation the siren, the remote transmitters, the associated
sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle
provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally installed
and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by
an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated
proof of purchase bearing the following information: consumer’s name, telephone number and address; the authorized dealers name,
telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle
license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote
transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS
RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED.
This warranty is non-transferable and is automatically void if: the unit’s date code or serial number is defaced, missing or altered; the unit has
been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect,
improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to
the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what constitutes excessive damage and
may refuse the return of any unit with excessive damage.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED
WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF
INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY
TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND
HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS.
DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A
GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND
HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE
AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF
THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED
OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND
APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST
DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL
NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES,
INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS,
LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A
LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS
WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE
UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR
OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.
Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential
damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State.
This warranty is only valid for sale of product(s) within the United States of America and in Canada. Product(s) sold outside of the United
States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied.
For further details relating to warranty information of Directed products, please visit the support section of Directed’s website at: www.
directed.com.
This product may be covered by a Guaranteed Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call
Directed Customer Service at 1-800-876-0800.
(920-10011-01 2011-06)
40
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Quick Reference Guide – Viper, Clifford, Python, Avital & Automate
Vehicle takeover with regular key
Press Remote
Start button*
4
5
* Your aftermarket remote may differ from the model shown in the illustrations.
Release
brake
pedal
Warning! Depressing the brake pedal again after this
step will disable the remote start feature.
Press any button on the transmitter.* The parking
lights flash 5 times confirming that the remote start
feature is active.
&
Note: If the parking lights do not flash 5 times, you
have not entered manual transmission mode and will
need to repeat steps 1 to 5.
Turn ignition OFF and remove the key from the
ignition barrel.
7
Exit the vehicle.
Parking lights flash x5
START
OFF
6
Press any
button*
OFF
OFF
START
START
Ready to
drive off
Apply
emergency
brake
O
N
Depress the brake pedal, put the car in gear
and drive off.
Apply the emergency brake.
O
N
4
3
Depress
brake
pedal
ON
START
Exit vehicle
Press the Lock button on the factory or aftermarket
remote.*
START
Enter the vehicle and turn the key into ON
position.
Depress the vehicle’s foot brake.
O
N
3
OFF
Complete the following steps within 45 seconds or the vehicle will shut
down.
2
Put
gear in
Neutral
Release the vehicle’s foot brake.
O
N
Press Unlock on
either remote*
OR
While the vehicle is running, put the gear in
Neutral (N).
ON
OFF
OFF
2
Press the Unlock button on the factory or
aftermarket remote.*
1
START
START
ON
START
Close the vehicle doors, hood and trunk, then
press the Remote Start button on the transmitter
to start the vehicle.*
ON
1
Manual transmission ready mode
OFF
OFF
8
The vehicle engine will shut Off after locking
the system.
Press Lock on
either remote*
OR
* Your aftermarket remote may differ from the model shown in the illustrations.
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Pit stop mode
1
SmartStart compatible
Stop the vehicle in a safe parking spot and put the
gear in Park (P). On manual transmission vehicle,
open the driver door.
This system is compatible with Directed SmartStart 3.0. For a complete list of
supported features, please visit www.mysmartstart.com.
Put
gear in
Park
What is SmartStart?
Press the Remote Start button on the transmitter.*
OFF
ON
STA
RT
O
N
Parking lights flash x1
START
Note: We recommend that you always lock the doors
of your vehicle when leaving it unattended.
OFF
It is safe to leave the engine running and exit the
vehicle with the key in hand.
O
N
ON
STA
RT
Turn ignition OFF and remove the key from the
ignition barrel.
F
F
4
Press Remote
Start button*
OF
3
&
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
OF
2
START
Exit vehicle
with remote
* Your aftermarket remote may differ from the model shown in the illustrations.
List of available commands
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.
Button(s)
Actions
Now you can remote start, lock and unlock your car just by pushing a button on your
smartphone; using the SmartStart App from Directed, the leader in vehicle security
and remote start. The simple graphical interface gives you control over the following
features of your installed remote start or security with remote start system:
• Lock/Arm
• Unlock/Disarm
• Remote Car Starter
• Trunk Release
• Panic
• Aux Channels
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It's easy with SmartStart! But, this is only the beginning!
SmartStart is loaded with additional features including GPS tracking, SmartSchedule,
vehicle status, roadside assistance, home control, parked car finder and more.
3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new
level of 2-way interaction with your vehicle. Connectivity is managed through the
Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.
For more information, visit www.mysmartstart.com.
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
Press & hold for 5 seconds to activate the trunk release (optional).
* This output is configurable. see your authorized installation center for more information.
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Quick Reference Guide – Autostart
Manual transmission ready/idle mode sequence
VVehicle takeover with regular key
1
While the vehicle is running, put the gear in
Neutral (N).
2
Depress the vehicle’s foot brake.
Apply the emergency brake twice (2), then release
the vehicle's foot brake and skip to step 5.
Press Remote
Start button*
3
OFF
O
N
14:36
&
Release
brake pedal
START
Within 10 seconds, press any button on the
transmitter.*
14:36
Press any
button*
The parking lights flash 5 times confirming that the
remote start feature is active.
Note: If the parking lights do not flash 5 times, you
have not entered manual transmission sequence and
will need to repeat steps 1 to 5.
Parking lights flash x5
OFF
5
6
Turn ignition OFF and remove the key from the
ignition barrel.
7
Exit the vehicle.
8
Press the:
• Lock button on the factory or aftermarket remote*
to shut the vehicle Off and lock the doors.
• Trunk button on the aftermarket remote only to
lock the doors and enter idle mode.
O
N
* Your aftermarket remote may differ from the model shown in the illustrations.
OFF
START
O
N
Ready to
drive off
4
START
START
4
Depress the brake pedal, put the car in gear and
drive off.
Apply emergency
brake x1 OR 2
Warning! Depressing the brake pedal again after this
step will disable the remote start feature.
ON
Enter the vehicle and turn the key into ON
position.
OFF
3
Apply the emergency brake, then release the vehicle's
foot brake.
START
O
N
Complete the following steps within 45 seconds or the vehicle will shut down.
OR
START
OFF
OFF
Press Unlock on
either remote*
OR
Depress
brake
pedal
ON
ON
14:36
START
Press the Unlock button on the factory or
aftermarket remote.*
START
2
ON
1
Close the vehicle doors, hood and trunk, then
press the Remote Start button on the transmitter to
start the vehicle.*
Put
gear in
Neutral
Exit vehicle
OFF
OFF
OR
14:36
Press Lock to shut vehicle Off
or Trunk (aftermarket remote
only) to enter idle mode
* Your aftermarket remote may differ from the model shown in the illustrations.
Directed Digital System FORD1
© 2014 Directed. All rights reserved.
Idle mode (automatic transmission only)
1
Stop the vehicle in a safe parking spot and put the
gear in Park (P).
SmartStart compatible
Put
gear in
Park
This system is compatible with Directed SmartStart 3.0. For a complete list of
supported features, please visit www.mysmartstart.com.
Press the Remote Start button on the transmitter.*
OFF
ON
ST
AR
T
START
It is safe to leave the engine running and exit the
vehicle with the key in hand.
Note: We recommend that you always lock the doors
of your vehicle when leaving it unattended.
OFF
Turn ignition OFF and remove the key from the
ignition barrel.
O
N
Parking lights flash x1
O
N
ON
Press Remote
Start button*
F
F
4
&
OF
3
14:36
ST
AR
T
The parking lights will flash once to indicate the
vehicle is now in Idle Mode.
OF
2
START
Exit vehicle
with remote
* Your aftermarket remote may differ from the model shown in the illustrations.
List of available commands
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.
Button(s)
Actions
Press & hold for 1 second to lock.
What is SmartStart?
Now you can remote start, lock and unlock your car just by pushing a button on your
smartphone; using the SmartStart App from Directed, the leader in vehicle security
and remote start. The simple graphical interface gives you control over the following
features of your installed remote start or security with remote start system:
• Lock/Arm
• Unlock/Disarm
• Remote Car Starter
• Trunk Release
• Panic
• Aux Channels
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It's easy with SmartStart! But, this is only the beginning!
SmartStart is loaded with additional features including GPS tracking, SmartSchedule,
vehicle status, roadside assistance, home control, parked car finder and more.
3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new
level of 2-way interaction with your vehicle. Connectivity is managed through the
Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.
For more information, visit www.mysmartstart.com.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
Press & hold for 5 seconds to activate the trunk release (optional).
* This output is configurable. see your authorized installation center for more information.
Directed Digital System FORD1
© 2014 Directed. All rights reserved.