1. No category

How to Cut Fruit & Vegetable ProduCts
e translicer®Cutter
Slices elongated Products with Precision at high capacities
The new E TranSlicer® Cutter ††patented by Urschel
Laboratories uniformly slices a wide variety of products at high
production capacities and is ideally suited for elongated products.
Three different types of cutting wheels: slicing wheels, ßpatented
MicroSlice® wheels, and julienne wheels, are available to produce a full range of slices and julienne cuts. The E TranSlicer
accepts firm products up to 4" (101.6 mm) in diameter and leafytype products up to 6" (152.4 mm) in diameter.
specifications
Length:
100.78" (2560 mm)
117.26" (2978 mm) with prep table
Width:
35.31" (897 mm)
Height:
61.79" (1569 mm)
66.36" (1686 mm) with remote stop
Net Weight:
1328 lb (600 kg)
Motor:
3 HP (2.2 kW)
types of Cuts
Slicing wheel configurationS
flat and crinkle slices: 1/32 to 3"
(.8 to 76.2 mm)
Julienne wheel configurationS Wide
range of sizes from 1/2 x 1/2" (12.7 x 12.7 mm)
to 2 x 2" (50.8 x 50.8 mm).
Feed Belt Motor:
1 HP (.75 kW)
Slicing
Wheel
MicroSlice wheel configurationS
flat slices: .020 to .240" (.5 to 6 mm)
crinkle slices: .069" (1.8 mm)
oval shreds: Oval-shaped cross section measuring approximately .125" (3.2 mm) thick by
.250" (6.4 mm) wide.
Julienne strips: A wide range of julienne strips
can be made from firm products. Contact Urschel
for more information.
Knives
Product
e translicer Cutter
JALAPENO PEPPERS
1/4" (6.4 mm) Slice
ZUCCHINI
1/4" (6.4 mm) Slice
CARROTS
2" (50.8 mm) Cuts
ONIONS
3" (76.2 mm) Strips
GREEN BEANS
1" (25.4 mm) Slice
LEMONS
1/8" (3.2 mm) Slice
SWEET POTATOES
.060" (1.5 mm) Slice
BANANA PEPPERS
9/32" (7.1 mm) Crinkle Slice
GREEN ONIONS
1/4" (6.4 mm) Slice
PEPPERS
1/4" (6.4 mm) Slice
ASPARAGUS
1" (25.4 mm) Cuts
1
ICEBERG LETTUCE
3/8" (9.5 mm) Julienne Strips
PICKLES
1/8" (3.2 mm) Flat Slice
CELERY
3" (76.2 mm) Stick, 1/2" (12.7 mm) Slice
diversaCut 2110® dicer
Versatile, high capacity Slicer, Strip cutter & Dicer
The ßßDiversaCut 2110® Dicer by Urschel Laboratories uniformly dices, strip cuts, and slices a wide variety of products at
high production capacities including potatoes, tomatoes,
bread, carrots, turnips, rutabagas, celery, pineapple, preformed boneless turkey roasts, petfood emulsions, sugar
beets, and many other applications.
The machine features continuous operation for uninterrupted
production and simplified designed for easy cleanup and
maintenance. Maximum product input size is 10" (254 mm) in
any dimension.
specifications
PEACHES
1/2" (12.8 mm) Dice
Length:
64.07" (1627 mm)
Width:
*63.62" (1616 mm)
Height:
68.37" (1736 mm)
Net Weight:
Motor:
1500 lb (680 kg)
5 or 10 HP (3.7 or 7.5 kW)
*Various discharge chutes are available. Machine
width varies depending on style of discharge chute.
Width listed is the maximum machine width available.
ZUCCHINI
1/4" (6.4 mm) Crinkle Slice
types of Cuts
Slicing Knife
Circular Knives
Crosscut
Knives
SliceS: By removing the crosscut spindle and the circular
knife spindle, the machine can make slices thru the full range
of slice thicknesses.
flat slices: 1/16 to 1" (1.6 to 25.4 mm)
crinkle slices: 1/8 to 1" (3.2 to 25.4 mm)
Deep crinkle slices: 1/8 to 1/2" (3.2 to 12.7 mm)
POTATOES
3/8" (9.5 mm) Crinkle Strips
StriP cutS: Flat and crinkle strip cuts in a variety of widths
can be made by removing either the crosscut knife spindle or
the circular knife spindle assembly.
Product
diversaCut 2110® dicer
ShreDS: A shredding spindle can be installed in place of the
crosscut knife spindle. Shreds will vary depending on the number of spacers and shred discs used. For optimum results, a
test cut of your product at an Urschel Product Test Cutting Facility is recommended.
DiceS: A slicing knife, circular knife spindle, and crosscut knife spindle are used for dicing. Changing the dice size
is done by using the required cutting spindles and adjusting the slice thickness.
PEPPERS
1" (25.4 mm) Dice
ONIONS
1/4" (6.4 mm) Dice
circular knife cuts: 1/8 to 3" (3.2 to 76.2 mm)
crosscut knife cuts: 1/8 to 1-1/2" (3.2 to 38.1 mm)
crosscut knife crinkle cuts: 3/8 to 1/2" (9.5 to 12.7 mm) crosscut knife V-cuts: 5/16 to 1/2" (7.9 to 12.7 mm)
CABBAGE
1/8 x 1-1/2 x 1-1/2"
(3.2 x 38.1 x 38.1 mm)
TOMATOES
5/8" (15.9 mm) Dice
CARROTS
5/16 x 5/16 x 1-1/2"
(7.9 x 7.9 x 38.1 mm)
2
EGGPLANT
3/4" (19.1 mm) Dice
CARROTS
1/8" (3.2 mm) Strip Cuts
diversaCut sprint® dicer
high Performance Small Dicer
POTATOES
9/32" (7.1 mm) Crinkle Strips
The DiversaCut Sprint® Dicer, by Urschel Laboratories,
Inc., is a high performance dicer designed to uniformly
dice, strip cut, and slice a wide variety of vegetables, fruits,
and meats. Efficiency and flexibility are key traits of the
Sprint. The compact machine size combined with the ease
of switching over from one cut size or type to another
deliver infinite production possibilities.
The machine features continuous operation for
uninterrupted production and simplified designed for easy
cleanup and maintenance. Maximum product input size is
approximately 6.5" (165.1 mm) in any dimension.
specifications
Length:
53.81" (1367 mm)
Width:
53.86" (1368 mm)
Height:
65.59" (1666 mm)
Net Weight:
Motor:
860 lb (390 kg)
1.5 HP (1.1 kW)
Circular
Knives
TOMATOES
1/4" (6.4 mm) Dice
Crosscut
Knives
Slicing Knife
Product
diversaCut sprint dicer
types of Cuts
PEPPERS
3/8" (9.5 mm) Dice
SliceS: By removing the crosscut spindle and the circular knife spindle, the machine can make slices
thru the full range of slice thicknesses.
flat slices: 1/16 to 1" (1.6 to 25.4 mm)
crinkle slices: 1/8 to 1" (3.2 to 25.4 mm)
StriP cutS: Flat and crinkle strip cuts in a variety of widths can be made by removing either the
crosscut knife spindle or the circular knife spindle assembly.
CARROTS
1/4" (6.4 mm) Strip Cuts
ICEBERG LETTUCE
5/8 x 3/4 x 3/4"
(15.9 x 19.1 x 19.1 mm)
DiceS: A slicing knife, circular knife spindle, and crosscut knife spindle are used for dicing. Changing
the dice size is done by using the required cutting spindles and adjusting the slice thickness.
circular knife cuts: 1/8 to 3" (3.2 to 76.2 mm)
crosscut knife cuts: 3/32 to 1" (2.4 to 25.4 mm)
crosscut knife crinkle cuts: 9/32 to 9/16" (7.1 to 14.3 mm)
ONIONS
1/4" (6.4 mm) Dice
TOMATOES
3/4" (19.1 mm)
POTATOES
1/4" (6.4 mm) Slice
3
CARROTS
1/8 x 1-1/2 x 1/8" (3.2 x 38.1 x
3.2 mm) Strip Cuts
POTATOES
1/4" (6.4 mm) Strip Cuts
translicer® 2510Cutter
large Product, high capacity Slicer/Shredder/Dicer
The new TranSlicer® 2510 design combines the
production-proven features of the 2500 with today's
industry-driven demands. The TranSlicer 2500 Cutter
revolutionized the leafy vegetable industry when it was
introduced in 1995. The TranSlicer 2510 Cutter replaces
the TranSlicer 2500 Cutter in the Urschel line-up with
valuable features to ease maintenance, increase
positive product flow, and decrease operational costs.
The new machine accepts the same types of products:
input of compressible food products up to 8" (203 mm) in
diameter, or firm, round products such as cabbage up to
6-3/4" (171 mm) in diameter (larger cabbage heads if cut
in half).
specifications
the tranSlicer 2510 offers:
• New, larger discharge chute simplifies product flow and reduces product damage.
• Increased accessibility with more hinged compartments and panels eases
maintenance and reduces cleaning time.
• More sloped surfaces including redesigned electrical enclosure and bottom feed
pan to simplify cleaning.
• All stainless steel motors including dynamic brake used on the cutting wheel
motor that enables the motor to smoothly stop.
• Quick feed belt release levers simplify servicing and belt changeovers.
• Additional stop button conveniently positioned opposite the electrical enclosure.
Length:
150.82" (3831 mm)
Width:
49.88" (1267 mm)
Height:
66.75" (1695 mm)
Net Weight:
Motor:
1500 lb (680 kg)
3 HP (2.2 kW)
Feed Belt Motors (2): 1 HP (.75 kW)
Julienne Knives
Julienne
Wheel
types of Cuts
SliceS: Choose from a variety of flat or crinkle slice thicknesses on firm products ranging
from 1/32 to 3-1/2" (.8 to 88.9 mm).
ShreDS: Wide variety available for cutting leafy vegetables. Thicknesses ranging from 1/16
to 9/32" (1.6 to 7.1 mm), and lengths ranging from 3/8 to 3" (9.5 to 76.2 mm) or length of
product.
Julienne: Many combinations of julienne sizes are available for cutting leafy vegetables
ranging from 3/8 x 3/8" (9.5 x 9.5 mm) to 1-3/8 x 1-1/2" (34.5 x 38 mm) to 3 x 2" (76.2 x 50.8
mm). Julienne sizes on fresh fruits such as cantaloupe and honeydew, and vegetables such
as potatoes and tomatoes ranging from 1/2 x 1/2 x 1" (12.7 x 12.7 x 25.4 mm) to 1 x 1 x 1"
(25.4 x 25.4 x 25.4 mm). Consult Urschel for more information.
CABBAGE
1/16" (1.6 mm) Shred
CARROTS
1/4" (6.4 mm) Slice
ROMAINE LETTUCE
1-1/2 x 2" (38.1 x 50.8 mm)
CABBAGE
1/2" (12.7 mm) Ribbon
ZUCCHINI
3/16" (4.8 mm) Slice
ICEBERG LETTUCE
1/8" (3.2 mm) Shred
1-3/8 x 1-1/2" (34.9 x 38.1 mm)
4
PAPAYA
3/4" (19.1 mm) Dice
Product
translicer 2510 Cutter
LEEK
1/2" (12.7 mm) Slice
CELERY
3" (76.2 mm) Stick, 1/2" (12.7 mm) Slice
urschel Model M6
leafy Vegetable Dicer
The two-dimensional cutter, patented§ Urschel Model M6, is a versatile
machine designed for dicing, strip cutting, or shredding a variety of products
through a wide range of sizes from product of a predetermined thickness. The
Model M6 operates continuously at high production capacities, and is
designed for easy cleanup and maintenance.
types of Cuts
DiceS: Many sizes available depending on the
selection of circular knife spacers and crosscut
knife spindle set-up.
circular knife cuts: 3/16 to 1-1/2" (4.8 to 38.1
mm)
crosscut knife cuts: 1/8 to 3" (3.2 to 76.2 mm)
standard, up to 5.66" (144 mm) with alternate
gearing
StriP cutS: Strip cuts can be made by
removing the crosscut knife spindle from the
machine. The length and thickness of strips
depends on the size of the original product.
ShreDS: Many types available. Consult with
Urschel Laboratories to achieve optimum
results.
Circular Knives
specifications
Length:
119.03" (3023 mm)
Width:
33.48" (850 mm)
Height:
50.37" (1280 mm)
Net Weight:
1600 lb (700 kg)
Motor: 5 or 7.5 HP (3.7 or 5.6 kW)
Top Belt
Product
Crosscut Knives
Model M6
with optional top belt
SPINACH
3/4 x 1" (19.1 x 25.4 mm)
Squares
KALE
1/4" (6.4 mm) Squares
COLLARDS
1" (25.4 mm) Squares
LEEK
1/4 x 3/8" (6.4 x 9.5 mm)
Squares
urschel Model ra-a
uniformly Dice, Strip cut, or Slice
The Urschel Model RA-A is a versatile machine capable of producing a wide range of dice and
strip cut sizes from a variety of fruits and vegetables. Interchangeable drive parts provide maximum
versatility and optimum cutting results in the small to intermediate size range. The Model RA-A
features continuous operation for uninterrupted production and simplified design for easy cleanup
and maintenance. Maximum input product size is 3-1/2" (88.9 mm) in any dimension.
types of Cuts
Feed Spindle
DiceS: A slicing knife, circular knife spindle, and crosscut
knife spindle are used for dicing. Changing the size of the
cubes is done by using the required cutting spindles and
adjusting the slice thickness.
Slice thickness: 1/16 to 3/8" (1.6 to 9.5 mm)
circular knife cuts: 1/8 to 1" (3.2 to 25.4 mm)
crosscut knife cuts: .050 to 3" (1.3 to 76.2 mm)
StriP cutS: Removal of the crosscut knife spindle and
shaft will enable strip cutting to produce strips of different
lengths as determined by incoming product size. A circular
spindle change may also be required.
GREEN PEPPERS
(Cored and Halved)
3/8" (9.5 mm) Dice
Slicing Knife
Circular
Knives
Feed Drum
Product
Crosscut Knives
Model ra-a
CITRUS PEEL
3/8 x 1/8"
(9.5 x 3.2 mm) x random
PINEAPPLE
1/4" (6.4 mm) Dice
5
specifications
Length:
46.11" (1171 mm)
Width:
36.93" (938 mm)
Height:
71.39" (1833 mm)
Net Weight: 700 lb (320 kg)
Motor:
5 HP (3.7 kW)
PICKLE RELISH
1/8 x 1/8 x 1/4"
(3.2 x 3.2 x 6.4 mm)
urschel Model g-a
Versatile Slicer, Strip cutter, and Dicer
The versatile Urschel Model G-A uniformly cuts dices, straight french fry strips, and
slices from a variety of soft ripe fruits and brittle root vegetables. A wide selection of
interchangeable cutting parts enables the user to obtain gentle, clean cutting through a
wide range of sizes at high production capacities. The Model G-A features continuous
operation for uninterrupted production, and simplified design for easy cleanup and
maintenance. Maximum input product size is 5-1/2" (139.7 mm) in any dimension.
Crosscut Knives
types of Cuts
Circular Knives
Product
Slicing Knife
Model g-a
PEACHES
3/8" (9.5 mm) Dice
SliceS: By removing the crosscut knife spindle, the circular knife
spindle, and the stripper plate, the
Model G-A can make slices up to
3/4" (19.1 mm) with the addition of
optional parts.
DiceS: A slicing knife, crosscut
knife spindle, and circular knife
spindle are used for dicing.
ONIONS
1/4 x 9/32 x 1/4"
(6.4 x 7.1 x 6.4 mm)
TOMATOES
1/8 x 1/8 x 1/4"
(3.2 x 3.2 x 6.4 mm) Dice
Changing the size of the cubes is
done by using the required cutting
spindles and adjusting the slice
thickness. Cubes up to 3/4" (19.1
mm) may be obtained.
StriP cutS: To make strip cuts,
only the slicing knife and the
crosscut knife spindle are used.
Strip cuts up to 17/32" (13.5 mm)
may be obtained.
Julienne StriPS: Julienne
strips are also available. Contact
Urschel for more information.
CABBAGE
1/4 x 3/8 x 1/4"
(6.4 x 9.5 x 6.4 mm) Chop
PAPAYA
3/4" (19.1 mm) Dice
specifications
Length: 73.73" (1873 mm)
Width:
45.94" (1167 mm)
Height:
49.25" (1251 mm)
Net Weight: 770 lb (350 kg)
Motor:
2 HP (1.5 kW)
ZUCCHINI
3/16" (4.8 mm) Julienne Strips
(precut to 2" (51 mm) length)
QuantiCut® dicer
large Product, high capacity Slicer/Dicer/Strip cutter
The QuantiCut® Dicer by Urschel Laboratories uniformly dices, strip cuts, and slices a
wide variety of food products at high production capacities. †Patented crosscut spindle and
circular spindle changing tools allow one person to change spindles without assistance.
The machine features continuous operation for uninterrupted production and simplified
designed for easy cleanup and maintenance. Maximum product input size is 10" (254 mm)
in any dimension.
Crosscut
Knives
Slicing
Knife
Product
QuantiCut dicer
TOMATOES
1/4" (6.4 mm) Dice
specifications
types of Cuts
Circular Knives
POTATOES
1/2" (12.7mm)
Deep Crinkle Strip Cut
SliceS: Removing the crosscut spindle, circular
knife spindle, and stripper plate, enables a full range
of slice thicknesses (optional discharge chute may
be required).
Straight slices:
1/8 to 1-1/8" (3.2 to 28.6 mm)
crinkle/Deep crinkle slices:
1/8 to 1-1/8" (3.2 to 28.6 mm)
DiceS: A slicing knife, circular knife spindle, and
crosscut knife spindle are used for dicing. Changing
the size of the cubes is done by using the required
cutting spindles and adjusting the slice thickness.
circular knife cuts:
5/32 to 3" (4.0 to 76.2 mm)
POTATOES
3/8 x 3/8" (9.5 x 9.5 mm) Crinkle Strip Cut
1/4 x 1/4" (6.4 x 6.4 mm) Strip Cut
3/8" (9.5 mm) Dice
1/4" (6.4 mm) Dice
Length:
89.63" (2277 mm)
Width:
80.35" (2041 mm)
Height:
65.79" (1671 mm)
Net Weight: 1870 lb (850 kg)
Motor:
7.5 HP (5.6 kW)
crosscut knife cuts:
1/8 to 2-5/8" (3.2 to 66.7 mm)
crosscut *crinkle/deep crinkle knife cuts: 1/8 to
2-5/8" (3.2 to 66.7 mm)
StriP cutS: A variety of flat and crinkle strips can
be produced. Consult Urschel for proper set-up.
*Slice thickness should not exceed the crosscut dimension.
Maximum slice thickness should not exceed 1/2" (12.7 mm)
6
CABBAGE & RED CABBAGE
1/8 x 1/4 x 1/4" (3.2 x 6.4 x 6.4 mm) Dice
1/8 x 1/4 x 3/4" (3.2 x 6.4 x 19 mm) Dice
1/8 x 3" (3.2 x 76 mm) x No Crosscut Shred
ONIONS & CARROTS
3/8" (9.5 mm) Dice Onions & Carrots
1/8 x 1/4 x 1/8" (3.2 x 6.4 x 3.2 mm)
Carrots
urschel Model CC
Versatile Slicer, Shredder, and granulator
The Urschel ‡‡Model CC uniformly slices, strip cuts, shreds and granulates
a wide variety of fruits and vegetables at high production capabilities with
excellent results. The versatile machine features interchangeable cutting heads
that enable the processor to change the type of cut in just minutes. Specially
designed knives do not require sharpening and are inexpensive to replace. The
Model CC features continuous operation for uninterrupted production and
simplified design for easy cleanup and maintenance. Maximum input product
size is 3-3/4" (95.3 mm) in any dimension when using stainless steel
impellers.
specifications
Length:
types of Cuts
48.03" (1220 mm) - 2 or 5 HP
51.74" (1314 mm) - 10 HP
flat Slice: Slice thicknesses .030 to
.500" (0.8 to 12.7 mm).
creScent ShreD: Crescentshaped cross section.
Width:
35.26" (896 mm)
Height:
31.47" (799 mm)
StanDarD crinkle Slice: 3-1/3
waves to the inch, .080" (2.0 mm) depth of
crinkle.
wiDe creScent ShreD: Crescentshaped cross section.
Net Weight: 550 lb (250 kg) - 2 or 5 HP
.175" crinkle Slice: 5.7 waves to the
inch, .084" (2.1 mm) depth of crinkle.
“V” Slice: .125" (3.2 mm) slices have 8
complete “V’s” to the inch. Depth of “V” is
.050" (1.3 mm). Slice thickness of .040 to
.100" (1.0 to 2.5 mm). • .212" (5.4 mm)
slices have 4.7 “V’s” to the inch. Depth of
“V” is .084" (2.1 mm). Slice thickness of
.040 to .100" (1.0 to 2.5 mm).
oVal ShreD: Approximately 1/8" (3.2
mm) thick and somewhat oval-shaped in
cross section.
.070" (1.8 MM) full ShreD, .097"
(2.5 MM) full ShreD, anD .125"
(3.2 MM) full ShreD: Diamond in
shape.
680 lb (310 kg) - 10 HP
Motor:
2 HP (1.5 kW), 5 HP (3.7 kW),
or 10 HP (7.5 kW)
“V” ShreD: “V”-shaped
cross section.
StriP cutS: Square or
rectangular in cross section:
3/32" (2.4 mm), 3/16" (4.8
mm), 1/4" (6.4 mm), 3/8" (9.5
mm), 3/4" (19.1 mm)
wiDe oVal ShreD: Approximately 1/8"
(3.2 mm) thick and somewhat oval-shaped
in cross section.
Product
Knife
Impeller
Model CC
RED ONIONS
.070" (1.8 mm) Full Shred
CARROTS
.125" (3.2 mm) "V" Shred
CABBAGE
.125" (3.2 mm) Oval Shred
SWEET POTATOES
1/4" x .080" (6.4 x 2 mm) x random
Julienne Strips
FRESH MUSHROOMS
3/16" (4.8 mm) Slice
STRAWBERRIES
1/4" (6.4 mm) Slice
RED CABBAGE
.090" (2.3 mm) Flat Slice
BROCCOLI STEMS
.125" (3.2 mm) V-Shred
7
urschel Model oC
crosscut Bias Slicer
The ¥Model OC Slicer is used to make a distinctive bias cut on elongated products
The machine cuts an included angle of 30 degrees with the long axis of the product.
This causes the slices to be radically different in appearance than the standard
crosscut pieces. One slice is made at a time which prevents any crushing of the
product. The Model OC features a wide selection of slice thicknesses from which to
choose, continuous operation for uninterrupted production, and is designed for easy
cleanup and maintenance. The machine is not suitable for slicing sticky products or
products that have a high concentration of sugar. The Model OC will accommodate
products up to 2-3/4" (69.9 mm) in diameter or width.
Knives
types of Cuts
specifications
Length:
BiaS flat & BiaS crinkle SliceS: A wide range from 1/16 to 1-3/4"
(1.6 to 44.5 mm)
BiaS flat SliceS when specially equipped with a Microslice® wheel:
.030 to .120" (.8 to 3 mm). Consult Urschel for further details.
Slicing Wheel
Product
Model oC
117.04" (2973 mm)
Width:
31.38" (797 mm)
Height:
44.70" (1135 mm)
Net Weight:
770 lb (350 kg)
Motor:
2 HP (1.5 kW)
Feed Belt Motor: 3/4 HP (.56 kW)
CARROTS
1/8" (3.2 mm) Bias Flat Slice
ASPARAGUS
3/8" (9.5 mm) Bias Flat Slice
CELERY
1/8" (3.2 mm) Bias Flat Slice
urschel Model VsC
cuts Segment, Slabs, and Strips
The §patented Urschel Model VSC produces a wide variety of cuts
including segments, crinkle or flat slabs, and square or rectangular strips from many
food products including carrots, pickles, zucchini, and potatoes. The Model VSC
features a variable speed drive, hinged access panel for easy access, quick
changeover of cutting heads, and simplified design for easy cleanup and
maintenance. The machine can be sold equipped with a feed pan and chute for
hand-fed operations. For added versatility, several different cutting heads are
available including the standard cutting head, slab cutting head, and the §§patented
Velocicut® cutting head. Consult Urschel for the cutting head best-suited for your
application. The Model VSC will accept product up to 4" (101.6 mm) in diameter
and is easily adapted to automated belt feeding.
types of Cuts
.156" (4.0 mm)
.188" (4.8 mm)
.218" (5.5 mm)
.250" (6.4 mm)
.276" (7.0 mm)
.281" (7.1 mm)
.285" (7.2 mm)
.290" (7.4 mm)
.294" (7.5 mm)
.297" (7.5 mm)
SquaRe StRipS
.300" (7.6 mm) .472" (12.0 mm)
.305" (7.7 mm) .500" (12.7 mm)
.313" (8.0 mm) .512" (13.0 mm)
.330" (8.4 mm) .560" (14.2 mm)
.344" (8.7 mm) .563" (14.3 mm)
.375" (9.5 mm) .591" (15.0 mm)
.394" (10.0 mm) .625" (15.9 mm)
.406" (10.3 mm) .750" (19.1 mm)
.438" (11.1 mm) .875" (22.2 mm)
.469" (11.9 mm) 1" (25.4 mm)
CARROTS
3/8" (9.5 mm) Carrot Sticks
PICKLES
3/8" (9.5 mm) Slab Cut
specifications
Length:
SlabS: Crinkle and flat slab cut sizes are available to meet
your product requirements.
8
32.61" (828 mm)
Height:
54.81" (1392 mm)
1030 lb (460 kg)
Motor: 3 or 5 HP (2.2 or 3.7 kW)
Cutting Head
Product
Blades
Segment cutS: 3, 4, 5, 6, 8, 10, or 12
POTATO
5 and 6 Segment Cut
Width:
Net Weight:
RectangulaR StRipS
.281 x .406" (7.1 x 10.3 mm)
.330 x .395" (8.4 x 10.0 mm)
.281 x .594" (7.1 x 15.1 mm)
.344 x .469" (8.7 x 11.9 mm)
.290 x .313" (7.4 x 8.0 mm)
.375 x .750" (9.5 x 19.1 mm)
.313 x .375" (8.0 x 9.5 mm)
.438 x .750" (11.1 x 19.1 mm)
.313 x .750" (9.5 x 19.1 mm)
.438 x .875" (11.1 x 22.2 mm)
.315 x .385" (8.0 x 9.8 mm)
SERRANO PEPPER
4 Segment Cut
116.48" (2959 mm)
PICKLES
5 Segment Cut
Model VsC
ONION
3/16" (4.8 mm) Slices
with Rings Intact
Comitrol® Processors
uniformly Mill, granulate, flake cut, or Puree at high throughputs
The Comitrol® Processor is widely used throughout the world as an effective solution for a multitude of dry, paste, and liquid size
reduction applications. Several different models are available to accomodate different applications. Comitrol Processors vary in
feed/discharge configurations, cutting head and impeller options, and horsepower. Every model features continuous operation for high
capacity throughputs and simple cleanup. Standard operations include: granulating, flaking, slicing, milling, shredding, liquefying,
pureeing, and dispersing.
The word “Comitrol” means controlled comminution. Comminution is the process of reducing something to a smaller size. The Comitrol
uses the principle of incremental shear; the product is efficiently and uniformly reduced gradually as it continues to rotate and pass
through a stationary reduction head.
Model 1500 specifications
Model 1700 specifications
Length:
51.42" (1306 mm)
Width:
33.31" (846 mm)
Height:
*72.13" (1832 mm)
Net Weight: 1100 lb (500 kg)
Motor:
15, 30, or 40 HP
(11.2, 22.4, or 30 kW)
Length:
50.69" (1288 mm)
Width:
33.31" (846 mm)
Height:
*72.13" (1832 mm)
Net Weight: 1100 lb (500 kg)
Motor:
15, 30, or 40 HP
(11.2, 22.4, or 30 kW)
*Height with 40 HP motor. This height
will vary depending on horsepower and
motor manufacturer.
*Height with 40 HP motor. This height
will vary depending on horsepower and
motor manufacturer.
The Comitrol® Processor Model 1500 is recommended for specific applications refining or finishing free-flowing liquids or viscous
slurries. Fruit/vegetable applications include: soy beans for soy milk,
purees for fruit juices, pepper slurries for mash or hot sauce, tomatoes for catsup, fruits and vegetables for baby foods and soups.
The Model 1500 accommodates 6" (152.4 mm) microcut heads.
Maximum infeed dimension is 3/8" (9.5 mm), but may depend on
microcut head and impeller used.
The Comitrol® Processor Model 1700 is the most versatile
machine in the Comitrol line. The Model 1700’s wide range of
fruit/vegetable applications include reductions of fruits, vegetables, and spices for flavorings, soups, pastes, salsas, sauces,
and beverages
The Model 1700 accommodates all three types of 6" (152.4
mm) diameter reduction heads - cutting heads, slicing heads,
and microcut heads. The standard two-piece enclosure simplifies disassembly and cleaning. Optional parts assist processors
in creating an enclosed cutting zone to deter escape of dust,
vapor, and liquid when installed with a collection system.
Maximum infeed dimension varies depending on the type of
head and impeller used.
Variety of 6" cutting heads:
sizes from approximately
.010 up to 1.5" (.254 up to
38.1 mm)
Model 1700
Model 3600
Impeller
Cutting Head
Blades
Impeller
Product
Microcut Head
Product
Blade
Impeller
slicing Head
Length:
35.69" (907 mm)
Width:
29.21" (742 mm)
Height:
38.64" (981 mm)
Net Weight:
400 lb (180 kg)
Motor:
10 HP (7.5 kW)
types of Cuts
Blade
Product
Model 3600 slant
specifications
The compact size of the Comitrol Processor Model 3600
makes it ideal for small volume to high capacity production.
Fruit/vegetable applications include reductions of fruits and
vegetables for pastes, flavorings, granulations, salsas, relishes, and bits.
The Model 3600 accomodates 6" (152.4 mm) diameter cutting heads. Maximum product infeed is 2.5" (63.5 mm) in any
dimension.
Variety of 6" Microcut heads:
smallest particle sizes from
approximately .0012 up to
.0237" (.03 up to .6 mm)
Model 1500
Model 1700
The Comitrol Processor 3600
is also available in a 30, 40,
60, or 70 horsepower motor
version(left), or with a suitable
feeder(right). Suitable feeder
is manufactured and installed
by a third party.
Variety of 6" Slicing heads
thicknesses from approximately .020 up to .060" (.5
up to 1.5 mm)
Model 1700
9
Comitrol® Processors
uniformly Mill, granulate, flake cut, or Puree at high throughputs
The Comitrol Processor Model 9300 is the
largest in the Comitrol series. The machine is
designed for one-pass particle size reduction
when the final product will be a slurry, paste,
liquid, or powder.
The large machine also features a larger 12"
(304.8 mm) microcut head and impeller, twice
the size of microcut head assemblies found
on the Model 1700. This makes it possible to
achieve smaller particle sizes with greater efficiency.
By using as much as 200 HP (149 kW),
much larger throughputs are possible.
Standard soft start gradually powers up the
machine by creating a reduced inrush current
allowing more efficient utility management.
Maximum product infeed is 3/8" (9.5 mm)
Model 9300 specifications
Model 9300 with Feeder
specifications
Length:
59.74" (1517 mm)
Width:
60.06" (1526 mm)
88.00" (2235 mm)
Height:
Net Weight:
3146 lb (1427 kg)
Motor: 150 or 200 HP (112 or 149 kW)
Length:
94.06" (2389 mm)
Width:
60.06" (1526 mm)
88.00" (2235 mm)
Height:
Net Weight:
3500 lb (1590 kg)
Motor: 150 or 200 HP (112 or 149 kW)
types of Cuts
Variety of 12" Microcut heads
Approximate size range from microdimensions up to
.0420" (1.1 mm). Test cutting of your product is recommended. Contact your local Urschel representative for more information.
GINGER PASTE
Model 1700
DRIED MUSHROOMS
Model 3600
RED BEAN PASTE
Model 3600
HORSERADISH ROOT
Model 3600
TEXTURED VEGETABLE PROTEIN DEHYDRATED LEMON PEEL
Model 1700
Model 1700
TOMATO CATSUP
Model 1500
BABY FOOD - PEAS
Model 9300
GARBANZO BEAN PASTE
Model 1700
The 12" (304.8 mm) diameter microcut
head/impeller (left) is twice the size of
the microcut head/impeller used on the
Comitrol Processor Model 1700 (right).
ECHINACEA PRECUT FOR
FURTHER REDUCTION Model 1700
ECHINACEA REDUCTION
Model 1700
PEPPER MASH
Model 3600
POTATO FLAKES
Model 3600
CHILI PASTE
Model 1500
DELI MUSTARD
Model 9300
ACAI BERRY PUREE
Model 9300
10
YELLOW ONION PUREE
Model 3600
SOY MILK
Model 9300
diVeRSACut 2110® diCeR
e tRAnSliCeR® CutteR
diVeRSACut SpRint®
diCeR
Model G-A
Model RA-A
Model M6
quAntiCut®
diCeR
Model oC
tRAnSliCeR® 2510
CutteR
Model VSC
Model CC
CoMitRol® pRoCeSSoR
Model 9300 with feedeR
CoMitRol® pRoCeSSoR
Model 3600 SlAnt
CoMitRol® pRoCeSSoR
Model 1700
CoMitRol® pRoCeSSoR
Model 9300
w w w . u r s c h e l . c o m
You are invited to test Cut Your Product
LABORATORIES INCORPORATED
2503 Calumet Avenue, P.O. Box 2200
Valparaiso, Indiana 46384-2200 U.S.A.
219/464-4811 Fax: 219/462-3879
http://www.urschel.com
E-mail: [email protected]
Urschel Laboratories has a complete network of test facilities and
experienced service and sales representatives around the world
ready to work for you on any size reduction application. Contact
your local Urschel Laboratories’ representative to schedule a comprehensive, no-obligation test cut today at www.urschel.com.
Designers and manufacturers of
precision size reduction equipment.
® DiversaCut, DiversaCut Sprint, Urschel, Comitrol, QuantiCut, TranSlicer 2000,
TranSlicer, MicroSlice, and Velocicut are registered trademarks of Urschel
Laboratories, Inc.
†The QuantiCut Dicer may contain parts protected by U.S. Patent Nos. 5993069,
6314849, 6561067, and 6883411. European Patent No. EP0892697, EP1015195,
EP1071888, EP1377415
ßß The DiversaCut 2110 Dicer may contain parts protected by U.S. Patent No.
6883411. European Patent No. EP1377415
¥ The Model OC may contain parts protected by U.S. Patent No. 5992284.
††The E TranSlicer may contain parts protected by by U.S. Patent Nos. 5896801,
5992284, 6148702, 6792841, and 61487094. European Patent No. EP1042107.
Other foreign patents pending.
L2400 JUNE 2011 (S.S. L2302)
ß MicroSlice may contain parts protected by U.S. Patent No. 5992284. European
Patent No. EP1042107.
‡‡The Model CC Slicer may contain parts protected by U.S. Patent No. 5694824,
7658133, and European Patent No. EP0756534. Other foreign patents pending
‡The TranSlicer 2510 may contain parts protected by U.S. Patent Nos. 5896801 and
6460444 and by European Union Patent No. EP0759837B1.
§The Model VSC may contain parts protected by U.S. Patent Nos. 5343623 and
6553885.
§§The Velocicut may contain parts protected by U.S. Patent Nos. 5343623, 5875697,
and 6553885 and European Patent No. EP0570153, and EP1289717.
¥¥ The Comitrol Processor may contain parts protected by U.S. Patent No. 5201469.