How to set up OpenDNS FamilyShield: Configuration for Netgear Routers Overview: 1. 2. 3. 4. Type the router's setup URL into your web browser address bar. Enter the Administrator password. Enter OpenDNS addresses in Primary DNS and Secondary DNS fields. Confirm OpenDNS FamilyShield has been applied. 1. Type the router's setup URL http://192.168.0.1 into your web browser address bar. 2. Enter the Administrator password (Default Username; admin, Password; password) (Fig1) Fig1 Fig2 3. Enter OpenDNS addresses in Primary DNS and Secondary DNS fields: Click on ‘Basic Settings and enter the addresses for OpenDNS: 208.67.222.123 and 208.67.220.123 then click ‘Apply’. (Fig2) Wait for the settings to be updated. You should now restart your PC and Router. 4. Confirm OpenDNS FamilyShield has been applied. Now visit https://www.opendns.com/welcome to confirm you have configured OpenDNS FamilyShield correctly. If you do not have a Netgear Router and you would like to configure a different Router, or if you would like to know more about FamilyShield, please visit; http://www.opendns.com/familyshield