9558 Product Materials Phenolic Bench-Style Shower Seat

Phenolic Bench-Style Shower Seat
Folding Seat
Accent Series – Phenolic
Model 9558-000305 Bradex®
Product Materials
FRAME: 1" dia. 18 gauge stainless steel tubing, welded.
WALL BRACKET: 16 gauge stainless steel with stainless steel piano
RETAINING BRACKET: 16 gauge stainless steel. Positive bullet-type catch
holds seat securely in up or down position.
SEAT: 5⁄16" thick solid phenolic core composed of compressed cellulose
fibers impregnated with resins. Surface laminate is fused to the core. All
exposed edges are machined smooth to a uniform dark finish.
⁄16" thick Phenolic Core Seat
(customer to specify color)
Hinged seat folds up and out of the way when not in use. When properly
installed, seat can support up to 250 lbs. – static load.
Verify all rough-in dimensions prior to installation. Provide concealed backing
or anchors as specified by architect before finished wall is applied. Secure to
wall with mounting screws (not included) at holes provided. Locate mounting
holes 161⁄16" above finished floor for comfortable adult use. Mounting kit
available from Bradley. For more information, visit bradleycorp.com.
WARNING: Be sure to use reinforced backing behind wall
where mounting screws or anchoring devices are installed to
ensure adequate support for the shower seat. All anchoring
devices (supplied by installer) must be appropriate for
specific wall construction. Severe personal injury and/or
property damage may result from improper mounting.
Standard Selections
 Specify color ____________________
(See color chart in back of catalog)
Guide Specification
Folding solid phenolic core shower seat shall be fabricated of 5⁄16" thick
solid phenolic core composed of compressed cellulose fibers impregnated
with resins. Surface laminate is fused to the core. Phenolic is secured to
a stainless steel frame of 1" diameter, 18 gauge tubing. Wall bracket of 16
gauge stainless steel with heavy duty hinges.
Overall dimensions: 17"W x 16"D x 15⁄16" thick.
Finished Wall
17" (432mm)
5¾" (146mm)
5¾" (146mm)
Mounting Hole Locations
for Wall Bracket
16" (406mm)
Ø 1" Stainless Steel
Tubing Frame
Stainless Steel
Retaining Bracket
Orders composed of products indicated as Bradex® will be available to ship in three days
after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
This information is subject to change without notice.3-16-2011
2" (51mm)
Finished Floor
Mounting Hole Locations
for Wall Bracket Catch
How to Specify Color
(See Color Selection Guides)
9 5 5 8
0 0 0
Washroom Accessories
Document No. 9000
© 2011 Bradley Corporation
P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone: 800.BRADLEY (800.272.3539) Fax: 262.253.4161