Giritech GmbH, Mariabrunnstr. 123, 88097 Eriskirch Deutschland · Österreich · Schweiz HOW TO replace server USB token license with the TOKENLESS license G/On server is running with the G/On USB server token inserted. Administrator wants to continue running G/On server on the same hardware with TOKENLESS option. This functionality is only available in G/On server version 3.4 and higher. If you are running 3.3.1 or older version of G/On software, please upgrade your installation to 3.4 version using USB token license before continuing with the TOKENLESS option. TOKENLESS feature needs to be purchased separately, therefore make sure your license allows you to use this feature. NOTE: license number is case sensitive; CAPITAL letters and numbers must be always used. Tokenless license number matches EDC serial of the server USB token. For more information, please refer to section “How to find the EDC serial of server USB token”. Steps below are only applicable to the described scenario. Please note: different “token to tokenless” scenarios might require different procedures or steps to apply. 1. Stop Emcads service. 2. Navigate to the G/On installation folder (default c:\Program Files\Emcads\), make a backup of eprofile and license files before continuing (e.g. copy them to another location). Only eprofile and license files have to be restored in case something fails. 3. Start GOnBuilder and login 4. Make sure you have tokenless license number ready. If not, it is right time to refer to „HOW TO find EDC serial of USB token” section. 5. Remove server USB token from the server. 6. Press “Activate license” button or go to File menu and choose “Renew license”. 7. You will be prompted to select your license type. Giritech GmbH Mariabrunnstr. 123 88097 Eriskirch Germany Geschäftsführer HRB Nr. Registergericht Ust-Id-Nr. Joachim Seibold 631818 Amtsgericht Ulm DE 213 403 660 Voba Friedrichshafen eG Kto 17 668 000 BLZ 651 901 10 BIC GENODES1VFN IBAN DE58651901100017668000 fon fax mail URL +49 (0) 7541 971099-0 +49 (0) 7541 971099-99 [email protected] www.giritech.de Giritech GmbH, Mariabrunnstr. 123, 88097 Eriskirch Deutschland · Österreich · Schweiz 8. Choose “Use G/On License” and type in or paste your tokenless license number as shown in example picture below: 9. Press OK and wait for license to be received. 10. Save and activate you configuration; close G/On Builder; start Emcads service. 11. Additionall step, not required: you can verify that your are running on tokenless version by making sure USB server token is not inserted and that you can reopen G/On Builder. HOW TO find the EDC serial of server USB token Make sure USB server token is inserted before continuing. 1. In the GOnBuilder, go to File menu and click “Renew license”. 2. Wait for license to be received. Giritech GmbH Mariabrunnstr. 123 88097 Eriskirch Germany Geschäftsführer HRB Nr. Registergericht Ust-Id-Nr. Joachim Seibold 631818 Amtsgericht Ulm DE 213 403 660 Voba Friedrichshafen eG Kto 17 668 000 BLZ 651 901 10 BIC GENODES1VFN IBAN DE58651901100017668000 fon fax mail URL +49 (0) 7541 971099-0 +49 (0) 7541 971099-99 [email protected] www.giritech.de Giritech GmbH, Mariabrunnstr. 123, 88097 Eriskirch Deutschland · Österreich · Schweiz 3. Go to Help menu and choose „Show Log“ 4. In the G/On Builder log search for EDC serial, for e.g. 050662XXXXXXXX - this your server USB token EDC serial, which will be used in tokenless procedure described above. Copy or write-down the EDC serial. 5. Close the G/On Builder log. Do not close the G/On Builder and do not save configuration. You can always find the G/On License number on the box he received with G/On or on the shipping document. Giritech GmbH Mariabrunnstr. 123 88097 Eriskirch Germany Geschäftsführer HRB Nr. Registergericht Ust-Id-Nr. Joachim Seibold 631818 Amtsgericht Ulm DE 213 403 660 Voba Friedrichshafen eG Kto 17 668 000 BLZ 651 901 10 BIC GENODES1VFN IBAN DE58651901100017668000 fon fax mail URL +49 (0) 7541 971099-0 +49 (0) 7541 971099-99 [email protected] www.giritech.de
© Copyright 2024