How to install GT1\EasyDIS v44 step-by-step Thanks to randomy @ www.bimmerforums.com PDF created by MaikelK @ www.bimmerforums.com I spent pretty much the entire workday and evening at home yesterday learning what GT1\DIS is, obtaining it, and then figuring out how to install it. It was no easy feat, as I have no access to bmwecu.org, where most of the information seems to be hidden (according to the few bits and pieces of information I could obtain). So I've put the steps I found necessary to install EasyDIS v.44. Credit to bmwecu.org who apparently developed this easy install. • Software Required: o Easy DIS v.44 BASE iso o Easy DIS v.44 Program iso o VMware v.6 o Daemon Tools • NOTE: Follow every direction exactly. When I say to use Daemon Tools, use Daemon Tools. I had some complications when I burned the ISO’s to CD, and could not activate the Programs disc. I cannot help you with the instructions or install of GT1, this article is the help I have provided. -Randomy • Install VMWare Workstation version 6 using default parameters during setup • Open VMWare and create a new Virtual Machine: • Select Typical • Select Other – Other • Name the VM • Select Host Only networking • Enter size of disk as 18.635, and allocate all disk space now • Click Finish and have a smoke while it create the Virtual Disk • The Virtual Machine is created • We need to make some changes. First Remove the Sound Adpater • Adjust Ethernet adapter to use VMnet1 • Switch to the options tab, and uncheck drag and drop from Guest Isolation • Mount “EasyDIS-base-44-v1.0” in Daemon Tools • Edit the CD drive of your Virtual Machine to use the Daemon Tools drive (F: in this case) • Start the virtual machine and quickly press F2 to enter the BIOS for it • Set the CD-Rom to be the first boot device • • • Save and exit the BIOS. The computer will reboot. The installation of GT1 begins. • The installation ends and you are notifed to eject the CD, and restart the VM, but do not do that yet!!: • Eject the iso from Daemon Tools • Mount the file “GT1_v44_programs” in Daemon Tools • • Now Shut-Off the Virtual Machine, and Restart it Return to the BIOS by pressing F2 and set the boot order back to default • Save and Exit, and the VM will boot up • The following screen will appear, select your language and Vehicle, press the green arrow to continue • • Select your Country, and Enter 12345 for Dealer Number. The rest of the info you can make-up Once you have entered the required information, click End > Quit • DIS appears!! • Click Administration and note that the CD drive shows DIS v44.00. If it doesn’t, you may need to try and mount the file “GT1_v44_programs” from Daemon Tools again • Press Installation under DIS, and enter 12345 (dealer number) as password • Now you wait for a long time • The installation will complete, press OK • Press End > Quit • You can now use diagnostics and coding\programming for your BMW