Dalle Technology Co., Ltd

Dalle Technology Co., Ltd
A15E Fuqiao Building, Fuhua Road, Futian District, Shenzhen, China
Tel: (86) 0755-25321739 Fax: (86) 0755-25320602
Full Function Mobile IP Dialer User Manual
Technology Parameters of IP Dialer
m
Size: 25mmx15mm
Thickness: 0.8MM
Work Voltage: 1.8—3.0V
Material: Unleaded Flexible Printed Circuits(FPC)
Surface Treating Techniques: Gold plating
Technology Specification: Compatible with ISO7816-1-2-3. GSM 11-11
Suitable Network:GSM 2G Network, GSM 3G Network, WCDMA 3G Network
Suitable Device:GSM Mobile Phone, WCDMA Cell phone
Suitable SIM Card:SIM Card,USIM Card, SMART Card
yd
al
le
.
co
Pictures of SIM Dialer
.m
Prepare IP Dialer, SIM card, your mobile phone and tape if needed. Then follow the illustrations below.
w
w
w
Insert IP Dialer and SIM card
Free Cut Slim enough
Need Cut
Dalle Technology Co., Ltd
A15E Fuqiao Building, Fuhua Road, Futian District, Shenzhen, China
Tel: (86) 0755-25321739 Fax: (86) 0755-25320602
m
After assemble SIM dialer, power on your mobile, you will see the IP CALL display on the stand-by screen, please
try to find the STK menu on your mobile, then find the IP CALL menu. STK menu usually display on the
application menu or phone setting or others, it's different on different cell phone models, but you do can find it. The
IP DIALER menu will display as following:
Enable IP CALL SIM dialer
Disable IP CALL SIM dialer
Choose service number (IP access number)
Configure the SIM dialer
Choose language(English,Chinese)
co
When you see the menu above, it means your mobile support the IP SIM dialer, you could configure and enjoy it
now. All the configuration should be processed under ADVANCED menu.
le
.
ADVANCED
Enter the ADVANCED menu by input default password 1234.
 MODE
.m
Select ONE mode that you need.
yd
al
Choose calling mode: call back/ call direct/call through
Input numbers you want to call through SIM dialer or not
Delay time to send the destination number,
Input service number(IP access number)
Add area or country code or # for destination number
w
w
w
Call-direct service
Call-through
Callback service
A).Difference between ICC1# & ICC1: Some IP systems only accept the digits end with #, some are not.
B). Difference between ICC1 and ICC2 : when we dial the IP access number, their must be voice record reminding
us input 1 , 2 or 3 to make a calling, sometimes input 1 to check our balance, and input 2 to make a call, input
different digit to choose different service,ICC1 and ICC2 are for different IP system, our engineer make a revise on
the software for ICC1 and ICC2.
C). The differences between ICB1 and ICB# are the same as point B.
Users have to choose the best suitable one, sometimes it needs to try one by one.
Dalle Technology Co., Ltd
A15E Fuqiao Building, Fuhua Road, Futian District, Shenzhen, China
Tel: (86) 0755-25321739 Fax: (86) 0755-25320602
Set filter
m
SET FILTER
Allow
Limit
le
.
co
 Allow
Which numbers you want to call through IP system(IP dialer),you can list here.
Input # means all numbers will through IP system.
#0086#0755 means numbers start with 0086 or 0755 will call through IP system; here # is a separate
symbol. You can input Max 40Bit.
If you only want international or local number call through IP system, list them here.
 SPEED
yd
al
 Limit
Same operation with Allow
Usually list emergency or fire calling here. Such as 911,110,119....
Any numbers you don't want to call through the SIM dialer ,list here.
w
w
w
.m
1. It means the delay time to send the destination number(DTMF) to the IP
system.
2. There are voice reminder since we connected with IP system, we should
wait until the voice reminder over, then the SIM dialer will send the DTMF
to the IP system. The time between connecting established and voice
reminder over is the speed.
3. You can input 0 to 9, 0 means least delay, 1 means 3 seconds, 2 means 6
seconds…9 means 27 seconds.
 SET NUMBER
1.Here,you can input the IP access number or calling card numbers. The
default is MAX 3 numbers. IP CALL can customize to 4/ 5/7 or more for
you.
2.For calling card, You can also input PIN number here:
IP access number*PIN*others (use * to separate them).
Dalle Technology Co., Ltd
A15E Fuqiao Building, Fuhua Road, Futian District, Shenzhen, China
Tel: (86) 0755-25321739 Fax: (86) 0755-25320602
ADD CODE
m
1. Sometimes we stored number with prefix +, but most of the IP system
can't realize +, they usually accept digits, here we can choose Add 00 for +.
2. Sometimes we stored mobile number without 0, but some IP systems
only accept numbers start with 0. Then we choose Add 0 for Mobile.
3. When we call local number or international numbers, we can input the
area or country code here,to be the prefix of the stored numbers.
4. Add # for + is for the special request of IP system.
co
Example
al
le
.
IP access number is 12590, call-through, numbers start with 0086 to call through IP system, 110/119/10086 do
NOT dial through IP system.
1. IP DIALER→ADVANDED→SET NUMBER→service1-->12590
2. ADVANCED→MODE→ICC2#
3. IP DIALER→NUMBER→*service1
4. ADVANCED→SET FILTER→ALLOW→#0086
5. ADVANCED→SET FILTER→LIMITED→#11#10086
LANGUAGE
.m
yd
Choose one among English, Chinese simplify and Chinese Traditional.
Configure IP Dialer on PC
w
w
w
1. Prepare SIM card reader, SIM card and IP Dialer, download IP Dialer software. IP CALL software
support SIM card reader with device only.
①
②
2. Put SIM card and IP Dialer together, insert into SIM card reader as the above pictures.
3. Set speed of SIM card reader as 7.2MHz (right side).See picture ③.
③
Dalle Technology Co., Ltd
A15E Fuqiao Building, Fuhua Road, Futian District, Shenzhen, China
yd
al
le
.
co
m
Tel: (86) 0755-25321739 Fax: (86) 0755-25320602
w
w
.m
4. Choose your own selection and then click Write to IP Call. Computer will write data
automatically.
5. If you have pull out SIM card reader, please click Reset before you write again.
SMS Remote Control
w
VoIP providers could revise end users’ setup with SMS.
 Rules of IP CALL SMS Remote Control
Each letter stands for one selection under IP CALL menu.
A → Set Filter: Allow(multidigit)
B → Set Filter: Limit (multidigit)
C → Password(multidigit)
D → Select ON or OFF. D0:IP CALL OFF, D1: IP CALL ON.
E → Choose Services. E1:Service1, E2:Service2, E3:Service3.
F → Language. F1:English, F2: Chinese Simplified F4: Chinese Traditional
G → Speed . Choose from 0 to 9.
H → Add 00 for +. H1:will NOT add 00 for +, H0:will add 00 for +
I → Mode. Choose from the 11 modes. I1:CONT.CALL, I2:ICC1#,…I#:ICB4.
J → Input IP access number of Service 1 (multidigit)
K → Input IP access number of Service 2(multidigit)
L → Input IP access number of Service 3(multidigit)
Notes
Dalle Technology Co., Ltd
A15E Fuqiao Building, Fuhua Road, Futian District, Shenzhen, China
Tel: (86) 0755-25321739 Fax: (86) 0755-25320602
1. Multidigit command should input how many digit are there in the content. For example, in command
B0810#12#1, B stands for dialing LIMITED, 08 represent to the digital amount of the content(10#12#11). It
must be a 2 digit number, means if there’s 3 digit in the content, it should go like this:B03. Same rules on
A,C,J,K and L.
2. SMS should be less than 60 bit.
3. Should setup SMS Save to SIM card on the phone.
Please add IPset: at the beginning of the SMS text.
 Example
Password is 1234,Now create the SMS as below for your end users:
co
m
IP access number is 12590, call-through, numbers start with 0086 to call through IP system, 110/119/10086 do
NOT dial through IP system. We know users can set on the phone as below:
1. IP DIALER→ADVANDED→SET NUMBER→service1-->12590
2. ADVANCED→MODE→ICC2#
3. IP DIALER→NUMBER→*service1
4. ADVANCED→SET FILTER→ALLOW→#0086
5. ADVANCED→SET FILTER→LIMITED→#11#10086
w
w
w
.m
yd
al
le
.
IPset:A05#0086B09#11#10086C041234D0E1F1G1H0I4J0512590