Illuminated Tactile Switches Series SPL12 General Specifications Circuit Current Rating Contact Resistance Insulation Resistance Operating Force Total Travel Operating Life Operating Temperature Solder Specifications :SPST :50mA @ 12VDC :100mOhm Max.(initial) :100MOhm Min. :300gf 50gf :0.3mm 0.1mm :5,000,000 cycles Min. :-25 deg.~+60 deg. :260 deg. for 3 seconds Materials Cover Cap Housing Base Lamp Term. Act. Dome End Term. LED :Polycarbonate (PC) :Polycarbonate (PC) :Polycarbonate (PC) :Polyamide (PA) :Phosphor bronze (PBS) with gold plating :Phosphor bronze (PBS) with silver plating :Brass with gold plating :Surface Mount Chip LED 12.5 7.62 12.00 Single chip LED (-) 5.00 7.62 12.5 a 50 4.50 di 5.00 Cover Cap LED Housing (Reflector) Action dome Base Lamp terminal End terminal 10.16 . .1 5.00 4.5 4.3 4.90 1.4 8.00 dia. 1.2-4 3 4 (+) d i a .0 dia .8 . 1. 10.16 2.1 SPL12P Illuminated tactile switch 8 -2 SPL12P tact switch Single Color LED Single Color / 2chips led 3 4 1 2 Dual Colors LED (SPST) Contact Configuration 2 1 Dimension unit in mm SPL12P (Illuminated Tactile Switch) How to Order SPL12 Function Code Illuminated P Switch L LED Indicator Cap Colors 1 2 3 4 5 6 7 Red Yellow Green White Transparent Orange Blue 01 S2S 03 S3 P3S 4S 7S 17 1P3 P37 LED Colors Red Super Yellow Green Super Green Pure Green(single) White (single) Blue (single) Red/Blue Red/Pure Green Pure Green/Blue "*" not standard type please inquire first Cover style / Color 00 FC RC RH SC SH UT DT RT LT C4 C5 B4 Without Cover Flat/clear Round h=4.9mm/clear Round h=6.9mm/clear Square h=4.9mm/clear Square h=6.9mm/clear UP Triangle/clear Down Triangle/clear Right Triangle/clear Left Triangle/clear Flat cover/white Flat cover/Foggy Raised cover/white "B4" type not available EXAMPLE : SPL12P-2-02-FC Illuminated tact switch PCB type - Yellow cap - Yellow led-Flat cover We reserve the right to modify technical data. SPL12.1 㷕㳲㛰昷⅓⏟+8$,<$1*&2/7'7(/ZZZK\FRPWZ Illuminated Tactile Switches Series SPL12 6.90 3.4 3.4 4.90 3.9 1.5 3.5 SPL12 Series Accessory-Cover style dia . 11 .0 13.4 13.4 Round Cover(RH) h=6.9mm Flat Cover(FC) 11.0 13.4 13.4 14.0 Square Cover(SH) h=6.9mm Flat cover(white C4 or clear C5) 3.4 6.90 Square Cover(SC) h=4.9mm 8.50 3.5 11.0 6.90 3.4 3.4 4.90 1.5 Round Cover(RC) h=4.9mm 13.4 9.4 10.7 3.4 3.5 5.00 Down Triangle(DT) Right Triangle(RT) Left Triangle(LT) 6.90 UP Triangle(UT) 13.4 斜口 11.0 14.0 Raised cover(white B4) SPL12.2 13.4 Square Cover(SH) h=6.9mm We reserve the right to modify technical data. 㷕㳲㛰昷⅓⏟+8$,<$1*&2/7'7(/ZZZK\FRPWZ Illuminated Tactile Switches Series SPL12 P/N SPL12-10 P/N SPL12-11 We reserve the right to modify technical data. SPL12.3 㷕㳲㛰昷⅓⏟+8$,<$1*&2/7'7(/ZZZK\FRPWZ Illuminated Tactile Switches Series SPL12 P/N SPL12-12 How to Build your own Transparency Paper the dotted line area is printable area 10.7 9.4 13.4 13.4 10.7 (0.2)R 9.4 Cover Transparent Paper dia 11.9 Transparent Paper dimension 13.4 .1 0.0 13.4 Transparent Paper dimension Flat Cover Square Cover Triangle type Transparency paper Suggested insert Material and thickness: Clear Polyester, 0.2mm max. Dimension unit in mm SPL12.4 We reserve the right to modify technical data. 㷕㳲㛰昷⅓⏟+8$,<$1*&2/7'7(/ZZZK\FRPWZ Illuminated Tactile Switches Series SPL12 Led Characteristics for SPL12P Illuminated tactile swich The electrical specifications shown are determined at a basic temperature of 25˚C. If the source voltage exceeds the rated voltage of LED, a ballast resistor must be connected in series with the LED. Single color Forward voltage Vf (V) at If=20mA Min Red -Super Yellow -Green 2.2 -Super Green -Pure Green -- Blue Typ 1.8 2.0 -2.0 3.1 Max 2.6 2.5 2.4 2.6 3.6 3.1 3.6 White -- 3.2 3.8 Dual colors Red Blue Red Pure Green Pure Green Blue ------- 1.8 3.5 2.0 3.2 --- 2.6 4.0 2.6 3.6 3.8 3.8 Dominant Wavelength Ȝ dom(nm) Luminous intensity Iv(mcd) at If=20mA Power dissipation Pd (mW) Min 638 585 571 566 525 Typ 643 590 --530 Max 648 595 573 576 535 Min 3.7 80 10 18.5 320 Typ 13 125 -40 -- Max --12 --- 60 75 72 110 108 460 465 470 40 -- -- 108 63 120 -- 120 28 28 28 94 200 50 40 50 50 180 --- ----300 100 65 120 80 120 80 80 Chromaticity X 0.26 638 465 638 520 520 460 Reverse voltage Vr (V) max. 5V Coordinates Y 0.24 ------- 648 470 648 530 530 470 Reverse current Ir (uA) at Vr=5V 100uA Forward current If(mA) max. 30mA CAUTION: LED is static sensitive devices Not to be handled by unauthorised personnel. , . Notes: 1.LED circuit is isolated and requires external power source. 2.LED an integral part of the switch. 3.Emitting color: 20% 4.Forward voltage: 0.1V 5.Liminous intensity / luminous flux: 20% Led Characteristics for SPL12I Indicator The electrical specifications shown are determined at a basic temperature of 25˚C. If the source voltage exceeds the rated voltage of LED, a ballast resistor must be connected in series with the LED. Single color Red Yellow Green Blue Dual colors Red Yellow Red Green Red Blue Yellow Yellow Blue Green Blue Forward voltage Vf (V) at If=20mA Dominant Wavelength Ȝ dom(nm) Luminous intensity Iv(mcd) at If=20mA Min ----- Typ 2.0 2.1 2.0 3.5 Max 2.6 2.6 2.6 4.0 Min 627 582 567 470 Typ 632 ---- Max 637 592 577 475 Min ----- Typ 300 350 250 400 Max ----- 80 80 80 120 ------------- 2.0 2.1 2.0 2.0 2.0 3.5 2.0 2.0 2.1 3.5 2.0 3.5 2.4 2.4 2.4 2.4 2.6 4.0 2.6 2.6 2.6 4.0 2.6 4.0 627 582 627 567 582 470 --582 470 567 470 632 -632 572 632 -587 570 ----- 637 592 637 577 637 475 --592 475 577 475 ------------- 120 300 120 180 160 300 300 180 350 300 180 300 ------------- 80 100 80 110 80 120 100 110 80 120 80 120 Reverse voltage Vr (V) max. 5V Reverse current Ir (uA) at Vr=5V 10uA Power dissipation Pd (mW) Forward current If(mA) max. 30mA CAUTION: LED is static sensitive devices Not to be handled by unauthorised personnel. , . Notes: 1.LED circuit is isolated and requires external power source. 2.LED an integral part of the switch. 3.Emitting color: 20% 4.Forward voltage: 0.1V 5.Liminous intensity / luminous flux: 20% We reserve the right to modify technical data. 㷕㳲㛰昷⅓⏟+8$,<$1*&2/7'7(/ZZZK\FRPWZ SPL12.5