ProSource - Light Source Software/ZEMAX - Optical Design Software Radiant Imaging provides ProSource™ software that enables the optical and illumination system engineer to view and analyze Radiant Source Models™ in a variety of ways, as well as generate ray sets that can be utilized with optical and illumination system design and analysis programs like ZEMAX. How to use ProSource Data with ZEMAX? Radiant Imaging Software ProSource Supports following files : *.RS8, *.RS7, *.RSM, *.MDB, and *.PSD. By this we can analyze luminance and luminous intensity distributions of measurements contained in any Radiant Source Model. We can Generate ray sets from any Radiant Source Model that are compatible with ZEMAXoptical design software in form of *.DAT file. To generate IES file, ProSource software can be used very easily. IES file is created from the Luminous Intensity Radar Plot. If the Radar Plot has not been generated, it will automatically be generated when the IES file is generated. This may take a few minutes the first time, but the Radar Plot will be saved to the Radiant Source Model file (for RS7 and RS8 formats), and can be quickly reloaded in the future. ProSource can generate ray sets formatted to be compatible with ZEMAX - the optical design programs. Ray sets are generated using the Ray Generation dialog box which is displayed by pressing the form of *.DAT format. button. Generated ray file can be save in After generating files *.IES and *.DAT file put these files in ZEMAX /Object Folder. As ZEMAX support not only Solid Work or Auto CAD file (*.IGS, *.STEP, *.SAT format) but also support light source file from ProSource, OSRAM Data file (*.DAT file). By this we can call these file in ZEMAX as shown below : Such way we can use ProSource software Data in ZEMAX software very easily.