PC
Music
Phone
TV
Mobile
How to set up and demo
ConnectLineTM
Remote
What you need to demo ConnectLine
Included with demo kit
The Phone adapter
(including cables and power supply)
ConnectLine enabled Hearing
Instruments (Epoq XW, W and V
or the Dual Connect series)
The TV adapter
(including cables and power supply)
An analogue phone
(i.e. not a digital
oﬃce phone)
ConnectLine™
A charged Streamer 1.2 or later version.
Use the power supply from the TV adapter
to charge if you do not have a separate
Streamer charger.
(All ConnectLine enabled Streamers are
labelled ConnectLine on the back)
A TV (or other audio
source e.g. PC)
TV
TV
TV
TV
TV
TV
How to set up ConnectLine TV
Connect to power
Connect the RCA Phono plug in the TV
and the mini jack in the TV adapter socket
labelled B.
If the TV does not have RCA Phono plug
please refer to the installation guide
included with the TV
adapter.
TV cord
B
Connect to TV Audio output
Connect the RCA Phono plug in the TV
and the mini jack in the TV adapter socket
labeled B.
TV
TV
TV
TV
TV
TV
How to pair Streamer and TV Adapter
1
Place the Streamer next to the TV adapter
(less than 30 cm /1 ft between devices).
30 cm
2
Press the Streamer Connect button for 5 seconds until the
blue light starts ﬂashing.
Connect button
Pairing is done when the blue light stops ﬂashing
rapidly. At the same time the STATUS indicator
on the TV adapter and the Audio button on the
Streamer will be orange.
TV
How to set up
ConnectLine™ TV
TV
TV
TV
TV
TV
TV
How to demo ConnectLine TV
Listen to the TV
Make sure the hearing instruments are turned
on, and that the client is wearing the DEMO
streamer around the neck.
1. Make sure the TV is turned on
2. Instruct the client to press the Audio button
on the Streamer. (The Audio button on the
Streamer will now light steady orange)
3. The client is hearing sound from TV in the
hearing instruments
Receive call when watching TV
Have somebody call the phone number to
which the Phone adapter is connected.
1. Let the client know that they should expect
an incoming call.
(The Phone button is ﬂashing green – and
the client will hear ringing tones in the hearing instruments)
2. Instruct the client to press the Phone button
on the Streamer when they hear the phone
ringing. (The Phone button will go steady
green)
3. The conversation can begin when the client
hears a beep in the hearing instruments
End call
1. Instruct the client to press the Phone button
to end the call. (The Phone button will no
longer be green)
2. After 2 secs. the sound will automatically
switch back to the TV sound. (The Audio
button will turn steady orange again)
Phone
Phone
Phone
Phone
How to set up ConnectLine Phone
Connect to power
Connect the Phone adapter to telephone
Move the phone cable from the telephone to the
Phone adapter. Unplug the cable from the Phone
and insert it into the BLACK socket of the Phone
adapter.
Connect the Phone adapter to telephone outlet
Take the cable included and plug one end into the
YELLOW socket on the Phone adapter. Plug the other
end in the phone socket where you just removed the
phone line. (Note: both ends are the same on the
cable).
Phone
Phone
Phone
Phone
Phone
Phone
Phone
Phone
How to pair Streamer and Phone Adapter
1
Place the Streamer next to the Phone adapter (less
than 30 cm/1ft apart).
30 cm
2
Press the Streamer Connect button for 5 seconds
until the blue light starts ﬂashing.
Press the red Phone button on the Phone adapter
for 5 seconds until the red status indicator is
ﬂashing.
4
After approx. 5-10 seconds the red status indicator on the Phone adapter gives constant red light
and the blue light in Streamer Connect button gives
constant light for 5 seconds and then shows slow
fading light.*
5 Verify pairing by pressing the phone button on the
Streamer. You should see the red status indicator
on the adapter start ﬂashing.
*You may have to re-pair if ﬁrst pairing sequence fails.
Connect button
Phone
How to set up
ConnectLine™ Phone
Phone
Phone
Phone
Phone
Phone
Phone
How to demo ConnectLine Phone
Make a call
Answer a call
Make sure the hearing instruments are turned
on, and that the client is wearing the DEMO
Streamer around the neck.
Call the phone number to which the Phone
adapter is connected.
1. Have the client press the phone button on
the Streamer. (The phone button will now
light green – after 2 secs. the client will hear
the dial tone in the hearing instruments)
2. Instruct the client to lift phone handset and
dial the number. (The client will hear the
key tones from the phone in the hearing
instruments)
3. When the number is dialled instruct the client to replace the handset on the base
4. The conversation can begin when the call
is answered. (The client will hear the usual
ringing tone in the hearing instruments
signifying that the calling party has yet to
answer the phone)
1. Tell the client to push the phone button on
the Streamer when he/she hears a ringing
tone in the hearing instruments. (The phone
button on the Streamer will also ﬂash green)
2. Instruct the client to press the phone button
on the Streamer when they hear the phone
ringing. (The phone button will become
steady green)
3. The conversation can begin after the client
hears a beep in the hearing instruments
indicating that the call is connected
End a call
1. Instruct the client to press the phone button
to end the call. (The phone button will no
longer be green)
More information available:
IFU
INSTALLATION GUIDE
ConnectLine TV adapter
Getting started
INSTALLATION GUIDE
ConnectLine Phone adapter
Getting started
911 43 500/07.08
www.Oticon.com/connectline
PRODUCT INFORMATION TV ADAPTER
The Oticon ConnectLine TV adapter takes the TV sound and wirelessly
PRODUCT INFORMATION PHONE ADAPTER
The Oticon ConnectLine Phone adapter is a Bluetooth interface between
transmits this in high quality to Streamer for optimal TV experiences.
As part of the ConnectLine system, the TV application stays connected by
instruments, that are Streamer compatible. It wirelessly connects the hear-
and in effect turning a pair of Epoq’s into a wireless headset.
ing instruments to audio sources for communication, entertainment and
It enables the client to access the home phone installation by using
information purposes, such as a mobile phone, land line phone, TV, music
Streamer and offers outstanding sound quality, improved intelligibility
TM
PRODUCT INFORMATION
The Oticon Streamer is the connectivity interface for the Oticon hearing
the conventional landline phone installation and the Oticon Streamer
This dedicated solution for TV listning is easy to install and gives a
high-end, natural sounding TV experience free of noise and artifacts.
the AutoConnect feature and works seamless and simultaneous with other
player, PC, etc.
and hands free phone usage at home.
applications such as home phone, mobile phone and music player.
Streamer is the core in the ConnectLine system where easy, convenient
As part of the ConnectLine system, the Phone adapter works seamless
daily use is in focus. Due to the AutoConnect and AutoPriority, the system
and simultaneous with other ConnectLine applications such as mobile
will always respond correctly to the touch of a single button on Streamer.
TM
phone, TV and music player.
Dispenser Sheet
Premium TV listening
Ease of use
Fashionable design
Seamless communication
Ease of use
Fashionable design
Quality sound streaming
The binaurally fitted instruments
Just turn on the ‘Connect’ function and
ConnectLine TV listening sets a new
The TV adapter is easy to install and daily
Its slim, elegant design and inconspicu-
The ConnectLine Phone application is a
Plugging in between the main phone
The Phone adapter not only looks good,
Streamer uses the digital EarStream
resembles miniature wireless
all ConnectLine applications are easily
standard for hearing instrument users.
use with Streamer is both userfriendly
ous appearance makes the TV adapter
unique solution which utilizes the clients
(or base station) and the phone wall
it is also compact to discreetly blend in
technology to transmit real time audio
headphones, custom tailored to the
controlled by pressing one button on
Both in audibility and satisfaction, since
users will get more out of their hearing
and secure. The AutoConnect feature
ensures that the ConnectLine TV adapter
solution.
is always ready for use whenever within
The TV sound arrives directly in the
10 m range from the user.
user’s hearing instruments via Oticon
TV listening starts just by pressing the
suitable to be placed either on the TV
Because of the crystal clear sound and
status whether transmission is active or
in stand-by.
next to phones or base stations.
directly to the instruments.
client’s hearing loss. Streamer also
is remarkably simple.
The clear red phone button and LED for
The benefit is a 10 kHz undistorted,
works with one instrument in case of
Once the Phone adapter and Streamer
connect status ensures safe operation.
crystal clear audio signal.
a monaural fitting.
are paired, the devices are automatically
cally detects when a Streamer is in pairing mode and requests pairing. No need
its natural response, the ConnectLine
outlet, the Phone adapter installation
municate via a standard landline phone
installation present in most homes.
The result is the abillity to communicate
The ConnectLine TV adapter automati-
Audio button on Streamer.
Indications on the TV adapter give clear
TV adapter will be most suitable for both
hearing solution and Streamer to com-
furniture or behind the TV set.
Simple Pairing
Streamer with the original richness and
nuances carefully accentuated.
with confidence and convenience.
ready for use whenever they are within
10 m of each other.
Due to advanced noise reduction and
for pushing buttons or special power up
echo cancellation systems, clients
routines, just place Streamer next to
receive clear undistorted conversations.
the TV adapter.
mild and severe hearing losses.
Incoming calls are notified in the hearing
instruments and accepted by pushing
phone as normally and transfer the call
Streamer.
Controlled by AutoPriority, 4 wireless
Ease of use
The AutoConnect feature makes sure that
When not used for audio streaming,
other ConnectLine devices and mobile
Streamer also functions as a remote
connected and ensures that the desired
phones are always connected and ready
control for volume control and program
audio source are heard when needed.
for use.
shift.
The hearing instruments need no operation by the user but will automatically
to the hearing instruments via Streamer.
devices can stay connected and be used
seamlessly.
A fully integrated system
In the ConnectLine system, Streamer
identifies all other ConnectLine devices
the Streamer Phone button shortly.
Outgoing calls are done by using the
switch to the correct program dedicated
Bluetooth technology
Streamer has built-in Bluetooth technol-
the selected audio source.
ogy for wireless connectivity to Connect-
Personal wireless headphones
Bluetooth profiles. Bluetooth is a
Line devices and supports all relevant
When a set of instruments is linked to
www.oticon.com/connectline
www.oticon.com/connectline
commonly used global standard for
Streamer, audio is transmitted directly
mobile phones and offers a transmission
and securely to both instruments.
range of up to 10 meters.
www.oticon.com/connectline
People First
911 66 910 00 / 03.09
We believe that it takes more than
technology and audiology to create the
best hearing instruments. That’s why
we put the individual needs and wishes
of people with hearing loss ﬁrst in our
development of new hearing care solutions.
www.oticon.com/connectline