How to Configure Your Modem Router Using Setup Wizard This document will detail how to configure your modem router for Internet and Wireless connection using the Setup Wizard accessible via a Web Browser. Please note: running the Setup Wizard will reconfigure all your modem router settings. If your modem router has been configured before, the old configuration will be replaced with the new one upon completion of the Setup Wizard. Click on this link to view this guide on YouTube: http://www.youtube.com/watch?v=sbOEulwOWEM Step 1. Accessing your modem’s configuration pages does not require Internet connection as these pages are stored inside your modem. Your computer just needs to be connected to the modem. Open your Internet Browser and in the address field type in http://192.168.1.1 Step 2. When prompted type in the Username and Password then click on the “Log In” button. If you have not changed the password for the modem administration, the factory settings are: Username: admin Password: admin If you cannot recall the password you assigned to your modem you will need to reset the modem to factory defaults by pressing the reset button for 10 seconds. Please note that this will revert all the settings in the modem to factory settings and you will have to reconfigure it with your Internet settings and Wireless security. Make sure you have your Internet account details (given by your Internet Provider) handy. D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 2 of 6 Step 3. After logging in you will be presented with the modem’s configuration pages. The Setup Wizard will start automatically. If not you can start it under Setup tab. Click on the Setup Wizard button: Step 4. The Setup Wizard will display the steps required to configure your modem router. Click the Next button: Step 5. Change the password that is used to access your modem router. Click the Next button. D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 3 of 6 Step 6. Select your Time Zone. Click the Next button to continue: Step 7. Enter your Internet Provider details: select Country and your Internet Provider. If your provider is not listed, select “Other”: Providers in Australia typically use these settings: Protocol: PPPoE; Connection Type: LLC; VPI: 8; VCI: 35 Providers in New Zealand typically use these settings: Protocol: PPPoA; Connection Type: VC-Mux; VPI: 0; VCI: 100 D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 4 of 6 Step 8. Set your Internet connection. In the Username and Password field please type in your Internet account details as given by your Internet Service Provider. Click on the Next button. Step 9. Set the name for your wireless network. Type in names for both 2.4GHz and 5GHz Wi-Fi networks, something that you can easily identify. Step 10. Set the level of security you want to use on your wireless network. It is recommended to select the “Best” option (WPA2). D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 5 of 6 Step 11. Set the security password for both of your your wireless networks. Take a note of this password as you will need to enter it into all your devices trying to connect to your Wi-Fi network for the first time. After you click on the Next button your modem router will apply the selected settings. The next steps are optional. If you wish to proceed with setting up mydlink Cloud Services – click on Next. Otherwise click on the Connect button. Your modem router’s Internet and Wireless configuration is now complete. D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 6 of 6