Как установить мой принтер используя Edimax принт-сервер для Windows Vista Этот FAQ применим для следующих моделей: ＊ PS-3207U ＊ PS-3207UWg Введение: Эта инструкция поможет вам установить сетевой принтер. Здесь мы показали настройку для принтера HP LaserJet 1100. Пожалуйста, выберите свою модель во время установки.using Edimax print server , PS-3205 or PS3207 as shown in the figure-1. Step by Step: Step 1 : Hardware installation (1.1) Connect the printer to the P2 USB jack using a USB cable. (1.2) Connect your Windows Vista PC (We presume in this guide that the IP address of your Vista PC is 192.168.2.x where the x is the number from 3 to .254) to the LAN port using a network cable. (1.3) Power on the PS-3207U (or PS-3205U), the printer and the Vista PC. Step 2 : Click Start and then Control Panel. Locate the Printers icon. Click the Add A Printer icon (as shown in the Figure-2). Step 3 : Click “ Start a local printer”. Step 4 : Click “ Create New port” , and select “Standard TCP/IP Port” for the port type. Click “Next”. Step 5 : Choose “TCP/IP Device” in the drop-down menu of “Device Type”. Enter the IP address of the print server, 192.168.2.2. (This is the default IP addres of the Edimax print server) in the “Hostname or IP address” field. The “Port Name” filed is just for reference purpose. You could enter whatever you prefer. Step 6 : Windows Vista is now trying to detect the printer. Step 7 : Click the “Custom” and the “Settings” button. Step 8 : Click the “LPR” button. Enter “ p2 “. Step 9 : Click “Next” to move on. Step 10 : Windows Vista will now attempt to detect and install the printer driver. You will be prompted to select a printer from a list of available printer drivers. Step 11 : Select your printer model and click “Next”. Step 12 : You will be prompted to enter the printer name. Enter your preferred name or just leave the default name unchanged. Click “Next”. Step 13 : Click “Print a test page” button, and let’s see whether the the paper is printed proplerly. . All configuration is complete.