MJ progressive divider valve assembly, with NPT

How to select parts to build an MJ series
progressive divider valve assembly, with
NPT threading.
A simple MJ assembly consists of
these basic parts:
1.
2.
3.
4.
5.
Inlet
Valve sections
End section
Tie Rods
Tie Rod Nuts
Other accessories are available as options
Which valve sections do you need?
MJ Working Sections
•
•
•
•
•
•
562500 MJ-5S
562501 MJ-10S
562502 MJ-15S
562503 MJ-5T
562504 MJ-10T
562505 MJ-15T
MJ w/Cycle Pin
•
•
Available on RH only
Not available on 5S or 5T valves
•
•
•
•
562508 MJ-10S
562509 MJ-15S
562510 MJ-10T
562511 MJ-15T
All MJ valve sections must be ordered in multiples of 5
Inlet, End, Gasket, Tie Rods & Nuts
One of each required per assembly:
• 560643
MJ Inlet
• 560645
MJ End
Two tie rods and two nuts required per assembly. Select the tie rod
according to the number of valve sections in the MJ assembly:
• 557515
3-section tie rod
• 557516
4-section tie rod
• 557517
5-section tie rod
• 557518
6-section tie rod
• 557519
7-section tie rod
• 557520
8-section tie rod
• 560649
9-section tie rod
• 556371
Tie rod nut
Optional components
Crossports
• 562914 MJ Crossport Bar
For each crossport bar used,
order qty 1 of p/n 557349,
1/8” NPT pipe plug, to plug the
unused outlet.
Cycle Indicators
• p/n 563272, SPDT cycle
switch assembly (switch
with bracket)
• Mounted onto the cycle pin
to provide electrical signal
when valve assembly is
cycling
• Cycle pin can be used
without the cycle switch to
provide visual indication.
Performance (High Pressure) Indicators
Reset Indicator with Memory
Automatic Relief Indicator
Shows you which line is blocked during a lube fault.
Vents to atmosphere when a line is blocked,
allowing other lines to keep working.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
563231
563232
563233
563234
563235
563236
563237
250 psi
500 psi
750 psi
1000 psi
1500 psi
2000 psi
2500 psi
563163
563164
563165
563166
563167
563168
563169
750 psi
1000 psi
1250 psi
1500 psi
2000 psi
2500 psi
3000 psi
Check Valves
Outlet Check Valves:
Bearing Point Check Valves:
•
•
•
1/8 NPT male inlet x 1/8 NPSM female
outlet
See L15825 for more information
Single Ball Check Valves (steel body, steel ball):
• 563195
10 psi cracking pressure,
• 563196
35 psi cracking pressure,
• 563197
125 psi cracking pressure,
• 563198
250 psi cracking pressure
• 563051
360 psi cracking pressure
Soft Seat Check Valve (steel body, Viton ball):
• 563049
35 psi cracking pressure
•
Required for oil systems to keep oil in
lines and controlled
Optional for grease systems
Many options available, see L15825 for
product offerings that match the needs of the
application.
Appendix A: MJ Valve Suffixes
Code
MJ-xxA
MJ-xxB
MJ-xxC
MJ-xxD
MJ-xxE
MJ-xxF
MJ-xxG
MJ-xxH
MJ-xxI
MJ-xxJ
MJ-xxK
MJ-xxL
MJ-xxM
MJ-xxN
MJ-xxO
MJ-xxP
MJ-xxQ
MJ-xxR
MJ-xxS
MJ-xxT
MJ-xxU
MJ-xxV
MJ-xxW
MJ-xxX
MJ-xxY
MJ-xxZ
Description
Not used
Twin valve with cycle pin on Right side.
Single valve with cycle pin on Right side, outlet on Right side.
Single valve with cycle pin on Right side, outlet on Left side.
Twin valve with cycle pin on Left side.
Single valve with cycle pin on Left side, outlet on Right side.
Single valve with cycle pin on Left side, outlet on Left side.
"SCR" or Single valve with a crossport on the Right side.
Not used
"SCL" or Single valve with a crossport on the Left side.
Twin valve with cycle pin on Right side, plus a crossport on the Right side.
Standard Single valve, but with outlet on Left side.
Twin valve with cycle pin on Right side, plus a crossport on the Left side.
Twin valve with cycle pin on Right side, plus crossports on Both sides.
Not used
Single valve with cycle pin on Right side, plus a crossport on the Right side.
Not used
Single valve with cycle pin on Right side, plus a crossport on the Left side.
Standard single valve, with outlet on Right side.
Standard twin valve.
Not used
Not used
Not used
Not used
Not used
Not used
Appendix B: Technical Specifications
Torque Specifications
Tie Rod Nut:
• 12 ft lbs (16.3 N-m)
Outlet Port Plug:
• 6 – 7 ft lbs (8.1 – 9.5 N-m)
Piston Enclosure Plug:
• 11 – 13 ft lbs (14.9 – 17.6 N-m)
Net Weight lbs (kg)
• 3 section: 1 lb, 15 oz (0.88)
• 4 section: 2 lb, 5 oz (1.04)
• 5 section: 2 lb, 11 oz (1.21)
• 6 section: 3 lb, 1 oz (1.38)
• 7 section: 3 lb, 7 oz (1.55)
• 8 section: 3 lb, 13 oz (1.72)
For more specs see L10111
For other options and specialty
parts, see the ILE Buyers Guide,
or contact Graco.
This guide is intended to keep the
subject matter as simple as possible,
but Graco does offer other optional
components.