How to select parts to build an MXP series progressive divider valve assembly, with NPT threading. A simple MXP assembly consists of these basic parts: 1. Inlet 2. Intermediate base sections (also known as Subplates or Baseplates) 3. Valve sections 4. End section 5. Tie Rods 6. Tie Rod Nuts Other accessories are available as options How many sections are in the assembly? This includes working sections and bypass blocks Count up the number of valve sections and bypass blocks (if any), and order that number of intermediate base sections. p/n 563519- MXP Intermediate Base, with NPSF threading Must be ordered in even quantities (2’s), so if you need 3 for your assembly, you still order 4 and put the extra one into stock. Order the correct tie rods according to number of sections:  3 tie rods, and 3 nuts required per MXP assembly • • • • • 557766 557767 557768 557769 557770 3-section tie rod 4-section tie rod 5-section tie rod 6-section tie rod 7-section tie rod • • • • 557771 557772 563520 555406 8-section tie rod 9-section tie rod 10-section tie rod Tie rod Nut Which valve sections do you need? MXP Working Sections • • • • • • • • • • • • • 562819 MXP-25S* 562820 MXP-50S* 562821 MXP-75S* 562822 MXP-100S* 562823 MXP-125S* 562824 MXP-150S* 562813 MXP-25T 562814 MXP-50T 562815 MXP-75T 562816 MXP-100T 562817 MXP-125T 562818 MXP-150T 562835 MXP-BP (By-Pass Section) MXP w/Cycle Pin (RH only) • • • • • • • • • • 562830 MXP-50S* 562831 MXP-75S* 562832 MXP-100S* 562833 MXP-125S* 562834 MXP-150S* 562825 MXP-50T 562826 MXP-75T 562827 MXP-100T 562828 MXP-125T 562829 MXP-150T *Each “S” section only uses one outlet, but each subplate has two outlets. For each “S” section in the assembly, order qty 1 of p/n 557391, 1/4” NPT pipe plug ,to plug the unused outlet. All MXP valve and BP sections must be ordered in multiples of 2 Each assembly needs 1 Inlet and 1 End section • 15R993, MXP Inlet, NPSF thread • 563518, MXP End section Must be ordered in even quantities (2’s), so even though you need only 1 per assembly, you still order 2 at a time, and put the extra one into stock. Optional components Crossports Cycle Indicators CR option: • 563525 Crossport Bar, Right Side CL option: • 563524 Crossport Bar, Left Side CB option: • 563526 Crossport Bar, Both Sides (Right and Left) For each CR or CL bar used, order qty 1 of p/n 557391, 1/4” NPT pipe plug, to plug the unused outlet. For the CB option, order 2 plugs. • p/n 563272, SPDT cycle switch assembly (switch with bracket) • Mounted onto the cycle pin to provide electrical signal when valve assembly is cycling • Cycle pin can be used without the cycle switch to provide visual indication. • For visual indication on a standard valve, order p/n 563260, Visual Cycle Indicator Assembly • For proximity switches, see next page Proximity switches See literature L15600 for more information. Explosion-proof prox switches include 6ft, 3 conductor cable. All others ship without connecting cable, order cable separately (see next page). Part No. Prox. Switch Type Operating Voltage Cable Electric Connection LED Max Cycle Max Pressure Rated Life Rate Per Min Rating - psi Cycle 564399 FSM 115 VAC 5-pin BH Mini No 200 3,500 150,000,000+ 563476 FSM 115 VAC 3-pin BH Mini No 200 3,500 150,000,000+ 563486 FSmech 20-32 VDC 3-pin BH Mini Yes 150 7,500 10,000,000+ 564400 FSmech 20-32 VDC 5-pin BH Mini Yes 150 7,500 10,000,000+ 564401 FSmech 115 VAC or 10-32 VDC Expl Proof* No 150 7,500 10,000,000+ 557752 FSM 10-32 VDC 4-pin CH Mini No 200 10,000** 150,000,000+ 558938 FSM 115 VAC 5-pin BH Mini No 200 10,000** 150,000,000+ 564403 FSM 10-32 VDC 4-pin Micro No 200 10,000** 150,000,000+ Cables for Prox switches • Most prox switches ship without a cable, so order the correct cable for the connector on the prox switch: • 124333, M12 Cable, Male by Female, 5 m/16 ft (for G3 pump) • 558021, 3-Pin Cable, Straight Connector - 6 ft • 558022, 3-Pin Cable, Straight Connector - 12 ft • 558025, 4-Pin Cable, Straight Connector, Polarity - PNP - 12 ft • 558026, 4-Pin Cable, 90° Connector, Polarity - PNP - 12 ft • 558023, 5-Pin Cable, Straight Connector - 6 ft • 558024, 5-Pin Cable, Straight Connector - 12 ft Performance (High Pressure) Indicators Reset Indicator with Memory Automatic Relief Indicator Shows you which line is blocked during a lube fault. Vents to atmosphere when a line is blocked, allowing other lines to keep working. • • • • • • • • • • • • • • 563252 563253 563254 563255 563256 563257 563258 250 psi 500 psi 750 psi 1000 psi 1500 psi 2000 psi 2500 psi 563170 563171 563172 563173 563174 563175 563176 750 psi 1000 psi 1250 psi 1500 psi 2000 psi 2500 psi 3000 psi Check Valves Outlet Check Valves: Bearing Point Check Valves: • • • 1/4 NPT male inlet x 1/4 NPSM female outlet See L15825 for more information Single Ball Check Valves (steel body, steel ball): • 563206 10 psi cracking pressure • 563207 35 psi cracking pressure • 563208 100 psi cracking pressure • 563209 250 psi cracking pressure • Required for oil systems to keep oil in lines and controlled Optional for grease systems Many options available, see L15825 for product offerings that match the needs of the application. Appendix A: MXP Valve Suffixes Code MXP-xxA MXP-xxB MXP-xxC MXP-xxD MXP-xxE MXP-xxF MXP-xxG MXP-xxH MXP-xxI MXP-xxJ MXP-xxK MXP-xxL MXP-xxM MXP-xxN MXP-xxO MXP-xxP MXP-xxQ MXP-xxR MXP-xxS MXP-xxT MXP-xxU MXP-xxV MXP-xxW MXP-xxX MXP-xxY MXP-xxZ MXP-BP Description Not used Twin valve with cycle pin on Right side. Single valve with cycle pin on Right side, outlet on Right side. Single valve with cycle pin on Left side, outlet on Left side. Not used Not used Not used Not used Not used Not used Not used Standard Single valve, but with outlet on Left side. Not used Not used Not used Not used Not used Not used Standard single valve, with outlet on Right side. Standard twin valve. Not used Not used Not used Not used Not used Not used By-pass block. Appendix B: Technical Specifications Torque Specifications Tie Rod Nut: • 6-9 ft lbs (8.1 – 12.2 N-m) Valve Block Mtg. Screw: • 12-13 ft lbs (16.3 – 17.6 N-m) Indicator Port Plug: • 12-15 ft lbs (16.3 – 20.3 N-m) Piston Enclosure Plug: • 46-50 ft lbs (62.3 – 67.8 N-m) For more specs see L10132 Net Weight lbs (kg) • 3 section: 18.2 (8.3) • 4 section: 22.6 (10.2) • 5 section: 26.9 (12.2) • 6 section: 31.3 (14.2) • 7 section: 35.6 (16.2) • 8 section: 39.9 (18.1) • 9 section: 44.3 (20.1) • 10 section: 48.6 (22.1) For other options and specialty parts, see the ILE Buyers Guide, or contact Graco. This guide is intended to keep the subject matter as simple as possible, but Graco does offer other thread options, and more optional components.