Data sheet no. 6.50b DCS 6000 Digital Conference System DC 6120 P Conference Unit • Configurable as a Chairman or Delegate unit • XLR connector for DIS microphone (lockable with tool) • Loudspeaker • Easy exchangeable push buttons to match local language/functionality • Mini Jack socket with volume control for floor signal The DC 6120 P is a fully digital microcomputer controlled conference with built in loudspeaker and XLR socket for use with the DIS series of Gooseneck Microphones. The unit is easily configured for use by either a delegate or a chairman and the two push buttons can be exhanged to match functionality or to match the local language. The unit is designed for portable use, but can also be installed recessed in a table. Configured as Delegate Unit Configured for use by a delegate the unit features a Speak (Request) button for activating the microphone and identifying the user to the system. The second button is the Mute button. As long as the button is activated the delegates own microphone´is muted. When muted the red light ring in the connected gooseneck microphone will be turned off. •Lockable XLR plug for DIS GM 65xx series gooseneck microphones •Easy exchange of the push buttons •“Speak”/"Request" push button for activating/deactivating the microphone or joining the request queue •“Request“ LED indicator •“Speak“ LED indicator •“Mute” push button for temporary muting own microphone •High quality loudspeaker with wide frequency response •Mini Jack with volume control for floor language •Push-To-Talk (Auto), FIFO, Manual and VOX (Voice Activation) and mixed operation modes (with SW 6000). VOX mode is CU Feature License dependant. •Microphone auto off •T h r e e m i c r o p h o n e i n t e r r u p t modes enabling “ping pong” microphone operation •Two DCS-LAN - connections (Single cable "Loop Through") for CAT5 STP/ FTP cable• Digital audio transmission •Free cable topology w. RP 6004 repeater •Unique ID no. identification for automatic system initialization microphones •"Delegates Off" LED indicator Microphones The unit is designed for use with the DIS range of Gooseneck Microphones like the GM 6523 (40 cm) or the GM 6524 (50 cm). The gooseneck microphone can be fixed to the unit using a 2 mm hex key (Allan tool/Umbraco tool). The locking device is accessable through a hole above the XLR socket. Configured as Chairman Unit When configured as chairman the two push buttons changes the functionality: •“Speak On/Off” push button with chairman priority (chairman overrides delegates) •“Delegates Off" push button for switching off all active delegate DIS, Danish Interpretation Systems A/S, Vestre Teglgade 12, DK-2450 Copenhagen SV, Denmark, Tel.: +45 33 85 40 40, Fax: +45 33 85 40 41, e-mail: [email protected] DCS 6000 Digital Conference System Technical Specifications Microphone Connection Mic. Type: DIS Electret Cardioid Connector Type: 3 pin female XLR socket (lockable with tool) DIS LAN Connections Connector Type: RJ-45, screened with auto-termination Connection to DCS LAN using STF/ FTP Cat 5 or better cabling. The Cable access is from rear with adequate clearance for connection from beneath the unit. DC 6120 P Conference Unit Headphone Connection 3.5 mm jack female stereo socket for analogue output of floor language Frequency Response: 100-15 kHz Temperature Range: 5 º - 40 º C Electrical Characteristics Power Requirements: Supplied from CU 6005/6011 Power Consumption: 2.5 W (typical) Loudspeaker Frequency Range: 150 Hz - 15 kHz Maximum Power: 3 W RMS Audio Section Frequency Response: 65 Hz - 16 kHz THD: < 0.1% S/N: > 90 dBA Physical Characteristics Dimensions (HxWxD): 61 x 150 x 168 mm Weight: 650 g Please refer to Data Sheet for CU 6011 for further specifications of the DCS 6000 system. The DCS 6000 system conforms to all relevant standards - e.g. IEC 914, ISO 4043, ISO 2603 Cut-out Dimensions (recessed) How to order Product: DC 6120 P Conference unit Order no.: 15 12 59030 DC 6100 P Accessories 15 12 59801 One hex tool and 10 "All. Del. Off" buttons GM 6523 Gooseneck Mic 40 cm 18 12 05714 GM 6524 Gooseneck Mic 50 cm 18 12 05716 Connection Cables Product: EC 6001-0.5 Cat5e, 0.5 m EC 6001-01 Cat5e, 1.0 m EC 6001-02 Cat5e, 2.0 m EC 6001-03 Cat5e, 3.0 m EC 6001-05 Cat5e, 5.0 m EC 6001-10 Cat5e, 10 m EC 6001-20 Cat5e, 20 m EC 6001-30 Cat5e, 30 m EC 6001-50 Cat5e, 50 m Order no.: 10 03 22500 10 03 23101 10 03 23201 10 03 23301 10 03 23501 10 03 24102 10 03 24202 10 03 24302 10 03 24502 DIS, Danish Interpretation Systems A/S, Vestre Teglgade 12, DK-2450 Copenhagen SV, Denmark, Tel.: +45 33 85 40 40, Fax: +45 33 85 40 41, e-mail: [email protected]
© Copyright 2024