® AUTOMATIC SD 6A For use in-line with automatic sampling systems. This rapid motorised divider provides representative sub-samples from bulk samples of granular material, quickly reducing the bulk sample to provide six representative sub-samples, of which three are retained for further laboratory analysis, and three pass through the divider to be returned into the process. The SD 6A is ideal for high throughput situations and can be supplied for continuous division of on-line samples, or used as a batch divider. SPECIFICATIONS Maximum particle size: 6 mm Maximum capacity: 9 litres Overall dimensions: 520 mm wide 720 mm high 410 mm deep Electrical power: single phase 220/240 V 50 Hz 13 Amp supply Manufactured in stainless steel. S A M P L E D I V I S I O N MANUAL SD 2M This manual divider is used to mix bulk samples and to divide randomly into two equal halves. The SD 2M is supplied complete with four sample troughs of sufficient depth to prevent the material from bouncing out. The sample is introduced at the top and separated through 18 chutes into the awaiting two troughs, complying with ISO 13690. Each trough pivots to facilitate re-mixing or division of the sample as required . The unit is easy to clean and features selfcontained storage racks. SPECIFICATIONS Maximum capacity : 6 litres Accuracy : ± 0.1% by weight Manufactured in stainless steel. We reserve the right to alter these specifications without prior written notice. Web: www.samplex.co.uk Email : [email protected] Tel : +44 (0) 1692 403403 Fax : +44 (0) 1692 404955 TekPro Limited - Willow Park - North Walsham - Norfolk - NR28 0BD - UK ® We reserve the right to alter these specifications without prior written notice. TEK/SALES/ADVERTISING/ENGLISH/CORELVERSION/6826/07.11.11/01/AN Web : www.tekpro.com ® SAMPLE DIVISION Versatile Multi-split Divider In order to authenticate analysis, bulk samples need to be randomly divided into sub-samples which are representative of the whole. The SD1-5M manual divider is used to mix bulk samples and to divide randomly into either a 1:1, 2:1, 3:1 or 5:1split ratio. The sample is introduced into the top of the divider and is separated by falling through the 12 internal stainless steel chutes. After separation, the sample exits and is collected from the two outlet spouts into awaiting containers. As the 12 internal chutes are removable, the versatility of the SD1-5M is further enhanced by allowing the split ratio to be changed to suit the operator's requirements. SD1-5M Manufactured entirely from Stainless Steel, all internal components are removable to eliminate the difficulty of cleaning. SPECIFICATIONS Construction : Stainless Steel 304 Standard finish - Bead Blast 1:1 2:1 3:1 5:1 Dimensions : 410mm (H) x 210mm (W) x 190mm (L) Standard Deviation 0.11g (based on a 300g sample) Optional Extras Wall mount brackets Bench mount support Hard wearing non-stick coating Web: www.samplex.co.uk Email : [email protected] Tel : +44 (0) 1692 403403 Fax : +44 (0) 1692 404955 TekPro Limited - Willow Park - North Walsham - Norfolk - NR28 0BD - UK ® We reserve the right to alter these specifications without prior written notice. TEK/SALES/ADVERTISING/ENGLISH/CORELVERSION/6826/07.11.11/01/AN Web : www.tekpro.com