1. No category

Gunnebo Anja
Shackles
High quality wirerope
and chain fittings
1
...Gunnebo-Anja Industrier AS
The Norwegian Forging Specialist
The company was established in 1918 as Andr. Jacobsen AS and is located on an island close to Bergen on the
Norwegian west coast. The firm has grown to become the leading Scandinavian manufacturer of forged shackles
and riggingscrews. Other main product lines are general forgings and The Gunnebo Lifting product range.
The manufacturing program is constantly developed to meet our customers varying demands. Thus the
company stands out as single point supplier.
The products are made from a range of steel qualities, including stainless acid proof steel and high grade alloy
steel to comply with the most stringent specifications. Our workshops comprise all facilities and systems for the
manufacturing and control of top quality products. This include tool design, advanced tool shop, forging, heat
threatment, machining, hot dip galvanizing and quality control.
As a proof of our consistant work to maintain a high standard of quality the company is certified in accordance
with the ISO 9001-2000 standard. The company was bought by Gunnebo in 2001 and changed name to
Gunnebo-Anja Industrier AS.
Firmaet ble etablert i 1918 som Andr. Jacobsen AS og er lokalisert på Osterøy ca 30 km nordøst for Bergen
sentrum. Firmaet har utviklet seg til å bli Skandinavias ledende produsent av sjakler og strekkskruer. Andre
hovedartikler er smidde og maskinerte detaljer for ulike formål, samt løfteprogrammet fra morselskapet
Gunnebo Lifting.
Produktene fremstilles i ulike utførelser og materialkvaliteter - inklusive seigherdingsstål og syrefast stål. Dette
sammen med konstant produktutvikling gjør at våre kunder kan få dekket sitt komplette behov fra èn produsent.
Vårt produksjonsutstyr dekker alle faser fra verktøykonstruksjon, fremstilling av verktøy, smiing, bearbeiding,
varmebehandling, varmgalvanisering og sertifisering. Sammen med høyt kvalifiserte medarbeidere er dette
grunnlaget for at firmaets kvalitetsikringssystem er sertifisert i samsvar med ISO 9001-2000. Bedriften ble
kjøpt av Gunnebo Industrier i 2001 og endret navn til Gunnebo-Anja Industrier AS.
2
...co-operation
Definitions
Working Load Limit (WLL) = The maximum load a component or lifting assembly is authorized to take in
general use under straight pull. The WLL is often known as Safe Working Load (SWL).
Proofload (PL) = The maximum load applies when prooftesting a component or lifting assembly. The tested
item may not show visible permanent deformation after proofloading.
Minimum Breaking Load (MBL) = The minimum load under straight pull at which the component or lifting
assembly may break.
Safetyfactor (S.F.) = The ratio between the MBL divided by WLL, for instance 6,0
Shockload = A resulting load from impact or jerk of a static load. A shockload is generally much larger than the
static load and great care should be taken to avoid such hazardous loads.
Shackles ............................................................................................................................................................. 7
- ANJA US Shackles
7
- ANJA Offshore Shackles
- ANJA Mooring Shackles and Mooring Bolts
- ANJA Red Alloy Shackles
- Shackles SMS
- Commercial Shackles
9
10
13
14
17
- ANJA Alloy Riggingscrews
21
- ANJA Thimbles
- ANJA Eyebolts
22
24
- Shackles
28
Riggingscrews ................................................................................................................................................... 20
- ANJA Standard Riggingscrews
20
Thimbles and eyebolts ..................................................................................................................................... 22
Stainless steel ................................................................................................................................................... 26
- Riggingscrews and Terminales
26
Definisjoner
Største tillatte arbeidslast (WLL) = Største tillatte belastning utstyret kan utsettes for under rent strekk. Ofte
benyttes forkortelsen SWL (Safe Working Load) synonymt med WLL.
Prøvelast (PL) = Største last som påføres en detalj eller redskap under prøvebelastning av denne, f.eks. i
forbindelse med sertifisering. For løft gjelder typisk at PL = 2 x WLL.
Minimum bruddlast (MBL) = Minste last som under rent strekk medfører brudd i en komponent.
Sikkerhetsfaktor (S.F.) = S.F. = MBL:WLL, f.eks. 6,0 basert på katalogdata for Anja U.S. sjakler.
Sjokklast = En resulterende last fra slag eller rykk fra en statisk last. En sjokklast kan gi svært høye
momentanverdier og bør unngås.
Stock
Testing machine
3
...testing and certificates
Product documentation
Upon request at time of order, load rated products can be supplied with
• Alternative documentation.
• Work certificate acc. EN 10204 - 2.1
• Certificate of basic rawmaterial acc. EN 10204 - 3.1
• Proof load certificate
• Tracable rawmaterial / inspection certificate acc. EN 10204 - 3.1
Approval by official classification offices can be arranged
Marking
The «Anja» products which can be supplied with a workcertificate are normally
marked with:
• Working Load Limit (metric tons)
• The manufacturer´s logo
• Tracability code
• Grade of steel (shackles only)
• CE mark confirm conformity with the Machinery Directive (shackles only)
Within the lifting tackle industry onshore and offshore there is a growing awareness and concern about product
safety and reliability.
In Europe this is also expressed in The Machinery Directive 89/392/EEC and later amendments which further
highlights the responsibility of the manufacturer, distributor and end user of lifting gear.
The «Anja» products are specified, monitored and documented in compliance with the most stringent
requirements for the product concerned. A certified ISO 9001-2000 system is an evidence of our quality standard.
We appreciate the trust shown us when specifying, ordering and using the «Anja» products.
Produkt dokumentasjon
På oppfordring ved bestilling kan produkter som er lastmerket leveres med
alternativ dokumentasjon.
• Produsent sertifikat i.h.t EN 10204 - 2.1
• Generelt material sertifikat i.h.t EN 10204 - 3.1
• Prøvesertifikat i.h.t arbeidstilsynets bestillingsnr.: 522
• Sporbart material / inspeksjonssertifikat i.h.t. EN 10204 - 3.1
Sertifisering / godkjenning av 3-part kan organiseres i spesielle tilfeller.
Merking
Produkter som leveres med prøvesertifikat er normalt merket som følger:
• Største tillatte arbeidslast (WLL) i tonn.
• Produsentens logo
• Sporbarhetsmerking
• Materialklasse (3, 6 eller 8), gjelder kun sjakler
• CE merke som bekrefter samsvar med Maskindirektivet (kun sjakler)
Det registreres stadig skjerpede krav til sikkerhet og pålitelighet for utstyr og komponenter som brukes til løft
og surring både offshore og innenfor landbasert industri.
Dette fremkommer for eksempel i Maskindirektivet 89/392/EEC med senere tillegg hvor spesielt
produsentenes, distributørenes og brukernes ansvar fremheves.
Våre «Anja» produkter er spesifisert, kontrollert og dokumentert i henhold til de strengeste krav for det
aktuelle produktet
Vårt ISO 9001-2000 sertifiserte kvalitetskontrollsystem er grunnlaget for vårt kvalitetsarbeid.
Vi er innforstått
med våre kunders tillitt når de spesifiserer, bestiller og anvender «Anja» produkter.
4
...instructions
Instructions for use
Shackles should be inspected before use to ensure that:
•
•
•
•
•
•
•
All markings are legible
The body pin are both indentifiable as being of the same size, type and make
The threads of the pin and the body are undamaged
Never use a safety bolt type shackle without using the split cotter pin
The body and pin are free from nicks, gouges, cracks and corrosion
Shackles may not be heat threated as this may affect their Working Load Limit
Never modify, repair or reshape a shackle by welding, heating or bending as this will affect the
Working Load Limit
Instruksjoner for bruk
Sjakler må kontrolleres før bruk for å forsikre at:
•
•
•
•
•
•
•
All merking er leselig
Bøyle og bolt er godt tilpasset hverandre
Det ikke er skade på gjenger
Det monteres saksesplint i alle sjakler med safetybolt
Bøyle og bolt er fri for sprekker / hakk
Sjaklene ikke har blitt påvirket av varme (sveising o.l.) eller bøying da dette påvirker sjakkelens styrke
Sjaklene må ikke endres i form av sveising, oppvarming eller bøying da dette kan påvirke arbeidslasten
Temperature
If extreme temperature situations are applicable, the following load reduction must be taken info account /
Ved ekstreme temperatur forhold, må det taes forbehold om følgende last reduksjon
Reduction for elevtated temperatures
Temperature:
New Working Load Limit
0 - 200 °C
200 - 300 °C
300 - 400 °C
> 400 °C
100% of original Working Load Limit
90% of original Working Load Limit
75% of original Working Load Limit
not allowed
5
...instructions
Side loads should be avoided as the products are
not designed for this purpose. If side loads cannot
be avoided, the following reduction factors must be
taken into account:
Load angle
0°
45°
90°
Reduction for side loading
New Working Load Limit
100% of original WLL
70% of original WLL
50% of original WLL
Avoid applications were due to movement
the shackle pin can rotate
Ved bevegelse av last vil sjakkelbolt kunne
løsne ved feil bruk
Shackle must be put weight on in stright
directions
Det vil oppstå skjevbelastning ved feil bruk
Avoid applications were due to movement
the shackle can rotate
Stramming av wire vil kunne medføre at
bolten løsner ved feil bruk
Shackle must be loaded in straigth direction
Sjakkelen monteres slik at belastning blir i
rett strekk
6
...shackles
Anja U.S. Anchor Shackles
- Standard:
- Material:
- Finish:
- Safety factor:
- Documentation:
- Temperature:
U.S. Fed. Spec. RR-C-271 - EN 13889
High Tensile Steel, Quenched and tempered / Legert stål, seigherdet
All parts hot dip galvanized, painted bolts/pins on top of galv. /
Varmforsinket bøyle og bolt
6,0/Sikkerhetsfaktor: 6,0
Test certificate and traceable 3.1 certificate /
Leveres med prøvesertifikat of 3.1 materialsertifikat.
- 20 °C - 200 °C
Art.no
WLL tons
Nominal
size
d
Bolt
dia
d1
Inside
width
a
Inside
length
c
Outside
eye
d2
Inside
bow
e
Weight
Safety
Bolt
Weight
Screw
Pin
Ref. figure
Ref. figure
Ref. figure
0,33
0,5
0,75
3/16” - 5
1/4” - 6
5/16” - 8
6
8
10
10
12
13
22
29
32
13
16
20
16
20
21
0,07
0,13
0,02
0,06
0,11
Ref. figure
Ref. figure
Ref. figure
1,0
1,5
2,0
3/8” - 9
7/16” - 11
1/2” - 13
11
13
16
16
18
21
36
43
47
22
26
33
26
29
33
0,17
0,25
0,42
0,15
0,21
0,37
Ref. figure
Ref. figure
Ref. figure
3,25
4,75
6,5
5/8” - 16
3/4” - 19
7/8” - 22
19
22
25
27
31
37
60
71
84
40
47
50
42
51
58
0,7
1,2
1,7
0,65
1,1
1,5
Ref. figure
Ref. figure
Ref. figure
8,5
9,5
12,0
1” - 25
1.1/8” - 28
1.1/4” - 32
28
30*
35
43
46
52
95
108
119
58
64
72
68
74
83
2,5
3,4
4,8
2,2
3,1
4,2
Ref. figure
Ref. figure
Ref. figure
13,5
17,0
25,0
1.3/8” - 35
1.1/2” - 38
1.3/4” - 45
38
42
50
57
60
74
132
146
178
74
84
105
89
98
127
7,0
9,0
15,0
6,0
8,0
13,5
Ref. figure
Ref. figure
Ref. figure
35,0
42,5
55,0
2” - 50
2.1/4” - 57
2.1/2” - 65
57
65
70
83
95
106
197
222
255
127
140
152
138
160
185
21,0
29,0
41,0
19,0
Ref. figure
Ref. figure
85,0
120,0
3” - 75
3.1/2” - 89
83
95
127
146
330
380
165
203
190
235
62,0
110,0
38,0
Forging tolerances: +/- 5% on inside width/length
*= 32 for 853/854
Safety Bolt / Mutterbolt
Ref. no 855
Art.no.: A085506-89 (dim)
Screw Pin / Øyepinn
Ref. no 854
Art.no.: A085405-64 (dim)
Trawling Pin / Trålpinn
Ref. no 853
Art.no.: A085313-45 (dim)
7
...shackles
Anja U.S. Anchor Shackles
- Standard:
- Material:
- Finish:
- Safety factor:
- Documentation:
- Temperature:
Art.no
U.S. Fed. Spec. RR-C-271 - EN 13889
High Tensile Steel, Quenched and tempered / Legert stål, seigherdet
All parts hot dip galvanized, painted bolts/pins on top of galv. /
Varmforsinket bøyle og bolt
6,0/Sikkerhetsfaktor: 6,0
Test certificate and traceable 3.1 certificate /
Leveres med prøvesertifikat og 3.1 materialsertifikat.
- 20 °C - 200 °C
WLL tons
Nominal
size
d
Bolt
dia
d1
Inside
width
a
Inside
length
c
Outside
eye
d2
Weight
Safety
Bolt
Weight
Screw
Pin
Ref. figure
0,5
1/4” - 7
8
12
25
12
0,06
Ref. figure
Ref. figure
Ref. figure
0,75
1,0
1,5
5/16” - 9
3/8” - 10
7/16” - 11
10
11
12
13,5
17
18,5
27
31
37
16
20
22
0,11
0,15
0,2
Ref. figure
Ref. figure
Ref. figure
2,0
3,25
4,75
1/2” - 13
5/8” - 16
3/4” - 19
16
19
22
21
27
31
41
51
60
33
40
47
0,30
0,60
1,10
0,25
0,55
1,0
Ref. figure
Ref. figure
Ref. figure
6,5
8,5
9,5
7/8” - 22
1” - 25
1.1/8” - 28
25
28
30*
37
43
46
71
81
90
50
58
64
1,50
2,2
3,1
1,3
1,9
2,8
Ref. figure
Ref. figure
Ref. figure
12,0
13,5
17,0
1.1/4” - 32
1.3/8” - 35
1.1/2” - 38
35
38
42
52
57
60
100
111
122
72
74
84
4,2
5,6
7,5
3,6
4,6
6,5
Ref. figure
Ref. figure
Ref. figure
25,0
35,0
55,0
1.3/4” - 45
2” - 50
2.1/2” - 65
50
57
70
74
83
105
149
171
203
105
127
152
13,0
18,0
39,0
11,5
16,0
Forging tolerances: +/- 5% on inside width/length
*= 32 for type 833/834
Safety Bolt / Mutterbolt
Ref. no 835
Art.no.: A083513-64 (dim)
8
Screw Pin / Øyepinn
Ref. no 834
Art.no.: A083405-45 (dim)
Trawling Pin / Trålpinn
Ref. no 833
Art.no.: A083313-45 (dim)
...shackles
Anja «Offshore» Shackles
- Standard:
- Material:
- Finish:
- Safety factor:
- Documentation:
- Temperature:
Art.no
WLL tons
DnV 2.7.1 / U.S. Fed. Spec. RR.C-271/DNV Type Approval No. S-2973 WLL 2,0 - 25T
Special Alloy Steel, Quenched and Tempered / Høylegert stål, seigherdet.
All parts hot dip galvanized + colour marking /
Varmforsinket og merkefarge.
As per DnV 2.7.1 (8,0 - 6,0) / Sikkerhetsfaktor i følge DnV 2.7.1
Test certificate and traceable 3.1 certificate of the bow and the bolt in
finished condition.
Leveres med prøversertifikat og sporbart 3.1 materialsertifikat for bøyle og
bolt i leveringstilstand
- 40 °C - 200 °C
Nominal
size
d
Bolt
dia
d1
Inside
width
a
Inside
length
c
Outside
eye
d2
Inside
bow
e
Weight
Safety
Bolt
A085613
2,0
1/2” - 13
16
21
47
33
33
0,42
A085616
A085619
3,24
4,75
5/8” - 16
3/4” - 19
19
22
27
31
60
71
40
47
42
51
0,7
1,2
A085622
A085625
A085628
6,5
8,5
9,5
7/8” - 22
1” - 25
1.1/8” - 28
25
28
32
37
43
46
84
95
108
50
58
64
58
68
74
1,7
2,5
3,4
A085632
A085635
A085638
12,0
13,5
17,0
1.1/4” - 32
1.3/8” - 35
1.1/2” - 38
35
38
42
52
57
60
119
132
146
72
74
84
83
89
98
4,8
7,0
9,0
A085645
A085652
A085664
25,0
35,0
55,0
1.3/4” - 45
2” - 50
2 1/2” - 65
50
57
70
74
83
105
178
197
255
105
127
152
127
138
185
15,0
21,0
41,0
A085676
A085689
85,0
120,0
3” - 75
3.1/2” - 89
83
95
127
147
330
380
164
203
190
235
62,0
110,0
Forging tolerances: +/- 5% on inside width/length
Safety Bolt / Mutterbolt
Ref. no 856
9
...shackles
Anja Mooring Shackles
- Material:
- Finish:
- Documentation:
- Materialfactor:
- Safetyfactor:
Art. no.
A085219
A085222
A085228
A085232
High Tensile Steel, Quenched and Tempered / Legert stål, seigherdet
All parts hot dip galvanized, red painted bolts on top of galv /
Varmforsinket bøyle og bolt.
Test certificate and traceable 3.1 certficate can be delivered /
Kan leveres med prøvesertifikat og 3.1 materialsertifikat
2,0
3,2 (materialfaktor + lastfaktor)
Rope
dia
32
40
48
64
Bow
dia
Bolt
dia
Inside
width
Inside
bow
Inside
length
d
d1
A
E
C
19
22
28
32
22
25
28
32
44
52
62
82
100
125
150
170
58
68
89
98
MBL
ton
MDL
ton
Weight
kg
28
40
60
90
8
12
18
22
1,4
2,1
3,8
5,8
Ref. no 852
Ved valg av dobbelsikring må bruker vurdere hvilke påkjenninger sjakkelen blir utsatt for, som f.eks.
stramningsforhold, saltinnhold og monteringsdybde
- Dim:
- Levering:
Ø 5,5 mm x 250 mm
pakning på 10 stk
Kobberkjerne (Ø 4,0 mm) plastbelagt med PVC
- Dim:
- Levering:
Ø 4,5 mm x 250 mm
pakning på 10 stk
Stålkjerne med 5-10 mm zinkbelegg som er plastbelagt med PVC
- Dim:
- Levering:
Ø 5,0 mm x 40 mm
pakning på min 25 stk
Kan leveres i el.forz og syrefast utførelse
10
...shackles
Anja Mooring Bolts
- Material:
- Finish:
- Materialfactor:
- Safetyfactor:
Quenched and tempered / Seigherdet
Hot dip galvanized / Varmgalvanisert
3,0
4,8 (materialfaktor + lastfaktor)
Art.no
Dim
Ø-legg
(dim)
Legg
L
Hol øye
E
G
Høyde
kile spor
Bredde
kile spor
Lengde
Gjenger
MBL
MDL
Vekt
kg
Ref. figure
Ref. figure
Ref. figure
Ø32 x 400
Ø38 x 500
Ø45 x 600
32
38
45
400
500
600
38
46
54
72
84
105
100
100
100
2
2
2
200
200
200
40
60
80
8
12
15
3,25
5,60
10,10
Sertifisert fortøyningsbolt for kile
No A825032-45 (dim)
Sertifisert fortøyningsbolt for gysing
No A825132-45 (dim)
Leveres med kile
Art.no
Dim
Ø-legg
(dim)
Legg
L
G
Høyde
kile spor
Bredde
kile spor
Lengde
Gjenger
T
MBL
MDL
Vekt
kg
Ref. figure
Ø32 x 400
32
400
72
100
2
200
Ø35 x 240
40
8
5,50
Ref. figure
Ref. figure
Ref. figure
Ø35 x 400
Ø38 x 500
Ø45 x 600
35
38
45
400
500
600
76
84
105
100
100
100
2
2
2
200
200
200
Ø38 x 240
Ø42 x 300
Ø50 x 400
50
60
80
10
12
15
5,70
9,00
17,00
Fortøyningsbolt T-bolt for kile
T-bolt No A825232-45 (dim)
Fortøyningsbolt T-bolt for gysing
T-bolt No A825332-45 (dim)
Leveres med kile
11
...shackles
Anja U.S. «Heavy Duty» Shackles
- Material:
- Finish:
- Documentation:
High tensile steel Quenched and Tempered / Legert stål, seigherdet
Painted surface / Malt overflate
Supplied with proof load test cert. and 3.1 material cert. for bow and bolt /
Leveres med prøvesertifikat og 3.1 materialsertifikat for bøyle og bolt
Art.no
WLL
d
d1
a
c
e
d2
Weight
A857105
150,0
105
108
165
400
275
216
153,0
A857120
A857125
200,0
250,0
120
125
130
140
175
200
500
540
290
305
242
254
210,0
260,0
A857140
300,0
400,0
500,0
140
170
180
150
175
185
200
225
250
600
650
700
305
325
350
280
330
360
335,0
570,0
630,0
600,0
700,0
200
200
205
215
275
300
700
700
375
400
410
430
980,0
1030,0
800,0
210
220
300
700
400
440
1100,0
1000,0
1200,0
240
250
240
280
340
400
700
800
420
50
480
560
1500,0
1900,0
Ref. no 857
Forging tolerances: +/- 5% on inside width/length
Anja Super Shackles
- Standard:
- Material:
- Finish:
- Safety Factor:
- Documentation:
U.S Fed. Spec. RR-C-271 Type IVA Class 3, Grade B
High Tensile Steel. Quenched and tempered / Legert stål, seigherdet
Hot dip galvanized / Varmgalvanisert
5,0
Test certificate and traceable 3.1 certificate can be delivered.
Kan leveres med prøvesertifikat og sporbart 3.1 materialsertifikat.
Ref. no 858
Art.no
WLL
Dim - d
d1
a
c
e
d2
Weight
A085838
A085845
A085852
30T - 1 1/2’’
40T - 1 3/4’’
50T - 2’’
38
45
50
42
50
57
60
74
83
146
178
195
99
126
137
89
104
117
8,8
15,0
20,0
A085857
55T - 2 1/4”
57
57
83
197
138
133
22,0
A085870
85T - 2 3/4’’
70
70
105
260
180
159
42,0
A085883
120T - 3 1/4’’
83
83
127
330
190
171
70,0
Anja Wide Body Sling Shackles
- Material:
- Finish :
- Safety Factor:
- Documentation:
High Tensile Steel. Quenched and tempered / Legert stål, seigherdet
Coated / Lakkert
5,0
Test certificate and traceable 3.1 certficate can be delivered./
Kan leveres med prøvesertifikat og sporbart 3.1 materialsertifikat.
Art.no
WLL tons
d
d1
a
c
e
A085945
40T
97
51
80
220
140
15,0
A085955
A085970
A085985
55T
75T
125T
100
120
150
57
70
80
85
105
130
240
290
365
160
186
220
30,0
67,0
110,0
12
Weight
Ref. no 859
...shackles
Anja «Red Alloy» Chain Shackles
- Standard:
- Material:
- Finish:
- Safety Factor:
- Documentation:
Dimensions generally as per SMS 1577
Hovedmål ifølge svensk standard SMS 1577
Special Alloy Steel, Quenched and Tempered / Høylegert stål, seigherdet
Red Painted / Rødmalt bøyle og bolt
4,0 / Sikkerhetsfaktor: 4,0
Supplied with Test Certificate / Leveres med prøvesertifikat
Art.no
WLL
tons
S.F=4,0
Nominal
size
To fit
chain
size
Bow
dia
d
Bolt
dia
d1
Inside
width
a
Inside
length
c
Outside
eye
d2
Weight
pcs
Kg
A831310
A831312
A831316
2,0
3,2
5,4
M10
M12
M16
7/8
10
13
8,5
11
13
10
12
16
15
20
24
30
39
52
20
26
33
0,10
0,20
0,40
A831320
A831322
A831324
8,0
10,5
12,5
M20
M22
M24
16
18
20
16
18
19
20
22
25
28
30
32
65
72
78
42
46
50
0,65
0,90
1,10
A831327
A831330
A831333
15,5
19,0
23,0
M27
M30
M33
22
25
26
22
25
28
28
30
32
36
40
44
86
94
103
55
62
68
1,70
2,50
3,10
A831339
A831342
32,0
40,0
M39
M42
30
32-33
32
35
38
42
48
52
116
129
75
82
4,50
5,70
Safety Bolt
Ref. no 831
Forging tolerances: +/- 5% on inside width/length
Art.no
WLL
tons
S.F=4,0
Nominal
size
To fit
chain
size
Bow
dia
d
Bolt
dia
d1
Inside
Width
a
Inside
Length
c
Inside
Bow
e
Outside
eye
d2
Weight
pcs
Kg
A851310
A851312
A851316
2,0
3,2
5,4
M10
M12
M16
7/8
10
13
11
13
16
10
12
16
15
20
24
34
45
55
26
35
42
20
26
33
0,13
0,25
0,50
A851320
A851322
A851324
8,0
10,5
12,5
M20
M22
M24
16
18
20
19
22
25
20
22
25
28
30
32
65
70
75
50
52
56
42
46
50
0,85
1,20
1,60
A851327
A851330
A851333
15,5
19,0
23,0
M27
M30
M33
22
25
26
28
32
35
28
30
32
36
40
44
85
94
104
62
68
77
55
62
68
2,20
3,40
4,40
A851339
A851342
32,0
40,0
M39
M42
30
32-33
38
42
38
42
48
52
115
125
84
92
75
82
5,70
7,50
Safety Bolt
Ref. no 851
Forging tolerances: +/- 5% on inside width/length
13
...shackles
Anja SMS 1577 Chain Shackles
- Standard:
- Material:
- Finish:
- Safety Factor:
- Documentation:
SMS 1577
High Tensile Steel. Normalized / Normalisert St. 52-3
All types Hot dip galvanized / Alle varianter leveres varmgalvanisert
5,0 / Sikkerhetsfaktor 5,0
Test certificate can be supplied on request /
Kan leveres med prøvesertifikat når det forlanges.
Art.no
WLL
tons
Nominal size
d1
Bow dia
d
Inside width
a
Inside length
c
Outside eye
d2
Weigth pcs kg
Ref. figure
Ref. figure
Ref. figure
0,6
0,9
1,5
M10
M12
M16
8,5
11
13
15
20
24
30
39
52
20
26
33
0,10
0,20
0,40
Ref. figure
2,4
M20
16
28
65
42
0,65
Ref. figure
3,0
M22
18
30
72
46
0,90
Ref. figure
3,7
M24
19
32
78
50
1,10
Ref. figure
4,8
M27
22
36
86
55
1,70
Ref. figure
6,0
M30
25
40
94
62
2,50
Ref. figure
7,5
M33
28
44
103
68
3,10
Ref. figure
9,4
M39
32
48
116
75
4,50
Ref. figure
12,0
M42
35
52
129
82
5,70
Ref. figure
15,0
M45
38
58
143
84
10,00
Ref. figure
19,0
M52
45
64
155
105
14,00
Forging tolerances: +/- 5% on inside width/length
Ref. 1577 A
1577A - A771110-52 (dim)
Ref. 1577 B
1577B - A772110-42 (dim)
14
Ref. no 1577 C
1577C - A773110-42 (dim)
Ref. no 1577 D
1577D - A774110-30 (dim)
...shackles
Anja SMS 1619 Anchor Shackles
- Standard:
- Material:
- Finish:
- Safety Factor:
- Documentation:
SMS 1619
High Tensile Steel. Normalized / Normalisert St. 52-3
Hot Dip Galvanized / Varmgalvanisert
5,0 / Sikkerhetsfaktor 5,0
Test certificate can be supplied on request /
Kan leveres med prøvesertifikat når det forlanges
Art.no
WLL
tons
S.F=5
Nominal
size
d1
Bow
dia
d
Inside
width
a
Inside
length
c
Inside
bow
e
Outside
eye
d2
Weigth
pcs
kg
A619110
A619112
A619116
0,6
0,9
1,5
M10
M12
M16
11
13
16
15
20
24
34
45
55
26
35
42
20
26
33
0,13
0,25
0,50
A619120
2,4
M20
19
28
65
50
42
0,85
A619122
3,0
M22
22
30
70
52
46
1,20
A619124
3,7
M24
25
32
75
56
50
1,60
A619127
4,8
M27
28
36
85
62
55
2,20
A619130
6,0
M30
32
40
94
68
62
3,30
A619133
7,5
M33
35
44
104
77
68
4,40
A619139
9,4
M39
38
48
115
84
75
5,70
A619142
12,0
M42
42
52
125
92
82
7,50
A619145
15,0
M45
45
58
140
100
105
11,00
Ref. no 1619B
Forging tolerances: +/- 5% on inside width/length
Art.no
WLL
tons
S.F=5
Nominal
size
d1
Bow
dia
d
Inside
width
a
Inside
length
c
Inside
bow
e
Outside
eye
d2
Weigth
pcs
kg
A619216
A619224
A619227
1,5
3,7
4,8
M16
M24
M27
16
25
28
24
32
36
55
75
85
42
56
62
33
50
55
0,50
1,60
2,20
A619233
7,5
M33
35
44
104
77
68
4,40
A619239
9,4
M39
38
48
115
84
75
5,70
A619242
12,0
M42
42
52
125
92
82
7,50
A619245
15,0
M45
45
58
140
100
105
11,00
Ref. no 1619A
Forging tolerances: +/- 5% on inside width/length
15
...shackles
Anja Large Dee Shackles
- Standard:
- Material:
- Finish:
- Safety Factor:
- Documentation:
Generally to BS 3032 with screwpin / Hovedmål som BS 3032 m/kragepinn
High Tensile Steel. Normalized / Normalisert St. 52-3
Self coloured / Sort
5,0 / 4,0
Test certificate / Leveres med prøvesertifikat
Art.no
Size
WLL
Ton
Safety factor
Bow dia
d
Bolt dia
d1
Inside width
a
Inside length
c
Approx Weigth
100 pcs
* A003305
* A003306
* A003308
3/16”
1/4”
5/16”
0,1
0,15
0,4
5,0
5,0
5,0
5
6
8,5
5
6
10
10
13
15
20
25
30
1,7
3,5
9,0
* A003309
3/8”
0,6 / 0,5
5,0 / 4,0
9 / 10
10 / 13
19
38
11,0 / 17,0
* A003311
7/16”
0,8
5,0
11
12
20
39
19,0
* A003313
1/2”
1,0
5,0
13
16
24
52
33,0
A003316
5/8”
1,5
4,0
16
19
32
64
66,0
A003319
3/4”
2,0
5,0
19
22
38
76
97,0
A003322
7/8”
3,0
4,0
22
25
44
83
157,0
A003325
1”
3,75
4,0
25
28
51
95
230,0
A003328
1 1/8”
5,0
4,0
28
32
54
105
320,0
A003332
1 1/4”
6,0
4,0
32
35
60
114
430,0
A003335
1 3/8”
6,0
5,0
35
38
70
140
550,0
A003338
1 1/2”
7,0
5,0
38
42
76
152
740,0
A003342
1 5/8”
11,0
5,0
42
45
84
168
950,0
A003345
1 3/4”
13,0
5,0
45
50
90
180
1100,0
* As long as availible on stock / Utgår ved beholdningsslutt
Forging tolerances: +/- 5% on inside width/length
Ref. no 33 DC
16
...shackles
Commercial Shackles
- Standard:
- Material:
- Finish:
Commercial Shackles with eye pin /
Handelssjakler med øyepinn
Mild Steel / Handelstål
Hot Dip Galvanized / Varmgalvanisert
Not recommended for lifting purpose /
Anbefales ikke brukt til løfteformål
Art.no
Size
Nominal
size
d
Bolt
dia
d1
Inside
width
a
Inside
length
c
Inside
bow
e
Approx
Weigth
100 pcs
A005005
A005006
A005008
M5
M6
M8
5
6
8
5
6
8
10
12
16
22
25
30
17
17
23
1,7
3,5
7,0
A005009
M10
9,5
9,5
20
33
28
11,0
A005013
M12
11,5
11,5
24
53
39
26,0
A005016
M16
16
16
32
70
52
70,0
A005019
M20
19
19
38
86
65
114,0
A005022
M22
22
22
44
98
75
162,0
A005025
M25
25
25
51
114
85
245,0
Ref. no 50-H
Forging tolerances: +/- 5% on inside width/length
Art.no
Size
Nominal
size
d
Bolt
dia
d1
Inside
width
a
Inside
length
c
Approx
weight
100 pcs
* A003005
A003006
A003008
M5
M6
M8
5
6
8
5
6
8
10
12
16
20
25
32
1,7
3,5
7,0
A003009
M10
9,5
9,5
20
38
11,0
A003011
M11
11
11
22
44
17,0
A003013
M12
11,5
11,5
24
52
26,0
A003014
M14
16
14
29
52
44,0
A003016
M16
19 / 16
16
32
65
70,0
A003019
M20
22 / 19
19
38
76
114,0
A003022
M22
25 / 22
22
44
88
162,0
A003025
M24
28 / 25
25
50
102
245,0
A003028
M28
32
28
56
112
345,0
A003032
M32
35
32
64
128
450,0
A003035
M35
38
35
70
140
595,0
A003038
M38
42
38
76
152
840,0
Ref. no 30-D
* El. forz / El. forsinka
Forging tolerances: +/- 5% on inside width/length
17
...shackles
* Imported Commercial Shackles
- Standard:
- Material:
- Finish:
Art.no
Size
Commercial Shackles with eye pin /
Handelssjakler med øyepinn
Mild Steel / Handelstål
El. plated / El. forsinka
Nominal
size
d1
Bow
dia
d
Inside
width
a
Inside
length
c
Inside
bow
e
Approx
Weigth
100 pcs
2
3
6
A050005
A050006
A050008
M5
M6
M8
5
6
8
5
6
8
10
12
16
20
24
32
15
18
24
A050010
M 10
10
10
20
40
30
9
A050012
M 12
12
12
25
48
39
26
A050016
M 16
16
16
32
60
48
49
A050020
M 19
19
19
38
74
57
80
A050022
M 22
22
22
44
85
66
130
A050024
M 25
25
25
51
97
75
200
A050027
M 28
28
28
56
107
84
300
Ref. no 500-H
* As long as availible on stock / Utgår ved beholdningsslutt
Forging tolerances: +/- 5% on inside width/length
Art.no
Size
Nominal
size
d1
Bow
dia
d
Inside
width
a
Inside
length
c
Inside
bow
e
Approx
Weigth
100 pcs
A030005
A030010
M5
M 10
5
10
5
10
10
20
20
40
15
30
2
9
21
A030011
M 11
11
11
22
44
33
A030020
M 19
19
19
38
74
57
80
A030022
M 22
22
22
44
85
66
130
A030024
M 25
25
25
51
97
75
200
A030027
M 28
28
28
56
107
84
300
A030030
M 32
32
32
64
122
96
390
A030033
M 35
35
35
70
140
105
520
A030039
M 38
38
38
76
146
114
700
* As long as availible on stock / Utgår ved beholdningsslutt
Forging tolerances: +/- 5% on inside width/length
18
Ref. no 300-D
19
...riggingscrews
Anja Standard Riggingscrews
- Standard:
- Finish:
- Safety factor
- Documentation
Generally to B.S. 4429, Closed Body with locknuts on terminals /
Tilsvarer B.S. 4429, lukket hylse og stoppmuttre
Hot Dip Galvanized / Varmgalvanisert
5,0
Sizes M10 - 2” are loadrated and can at time of order be supplied with test certificate
on request / Dimensjoner M10 - 2” er lastmerket og kan på forlangende ved bestilling
leveres med prøvesertifikat
Art.no
Dim
Threads
Ref. figure
Ref. figure
Ref. figure
Ø6
Ø8
Ø10
M6
M8
M10
Ref. figure
Ø12
Ref. figure
Ref. figure
Ø16
Ø20
Ref. figure
Ref. figure
WLL
5:1
tons
Load
limit
Take up
B
N
L
M
K
H
G
F
Approx
Weigth
100 pcs
0,20
0,32
0,5
80
85
90
100
110
125
175
210
225
5
6
8
18
25
20
8
9
10
11
12
13
11
12
13
5
6
7
0,13
0,25
0,30
M12
0,7
155
195
315
10
30
13
30
15
10
0,65
M16
M20
1,2
1,5
185
210
230
270
380
450
12
16
44
50
18
20
40
50
20
24
12
16
1,25
2,20
Ø22
M22
2,2
230
295
500
20
60
25
50
24
16
3,30
Ø24
M24
3,2
250
325
555
22
65
28
56
28
19
4,60
Ref. figure
Ø32
1 1/4”
4,8
290
370
680
28
85
38
70
35
22
8,50
Ref. figure
Ø38
1 1/2”
6,0
300
400
760
32
100
45
80
40
25
14,50
Ref. figure
Ø45
1 3/4”
8,5
290
400
760
38
105
50
90
45
30
20,90
Ref. figure
Ø52
2”
11,0
290
400
820
45
120
58
100
45
35
24,00
* El. plated / El. forsinka
Forging tolerances: +/- 5% on inside width/length
Ref. no 401
A401406 - 52 (dim)
20
Ref. no 402
A402406 - 52 (dim)
Ref. no 404
A404406 - 52 (dim) *not 8mm
...riggingscrews
Anja Alloy Riggingscrews
- Standard:
- Range:
- Material:
- Finish:
- Safety factor:
- Documentation:
Load rated similar to U.S. Fed. spec. FF-T-79 l.b /
Arbeidslaster som U.S. Fed. spec. FF-T-79 l.b
Closed Body 2,5T to 17T, Larger sizes Open Body /
Leveres med lukket hylse fra 2,5T - 17T, større dimensjoner åpen hylse
High Tensile Steel, quenched and tempered / Legert stål, seigherdet
Hot Dip Galvanized / Varmgalvanisert
5,0
Supplied with Test Certificate, 3.1 material certificate available on request /
Leveres med godkjent prøvesertifikat, sporbart 3.1 materialsertifikat kan leveres på forlangende
Art.no
Dim
Size /
threads
WLL
5:1
tons
Take up
B
N
L
M
K
H
G
F
Approx
Weight
kg / pcs
Ref. figure
Ref. figure
Ref. figure
Ø20
Ø24
Ø32
M20
M24
1 1/4”
2,5
5,0
7,0
210
250
270
270
340
370
455
570
680
16
22
28
50
65
85
20
28
38
50
56
70
24
28
35
16
19
22
2,3
4,6
8,0
Ref. figure
Ø38
1 1/2”
10,0
300
420
790
32
100
45
78
40
25
14,0
Ref. figure
Ø45
1 3/4”
13,0
360
500
870
39
105
50
90
45
30
24,0
Ref. figure
Ø52
2”
17,0
450
600
1030
45
120
58
100
45
35
38,0
* Ref. figure
Ø64
2 1/2”
27,2
600
800
1490
57
140
75
73,0
* Ref. figure
Ø70
2 3/4”
34,0
600
800
1570
70
145
89
98,0
* Open body without safety bolt in jaw
Ref. no 801
A801420-70 (dim)
Ref. no 802
A802420-50 (dim)
Ref. no 804
A804420-50 (dim)
21
...thimbles
Standard Commercial Thimbles
- Material:
- Finish:
Mild Steel / Handelsstål
Galvanized / Galvanisert
Art.no
Dia rope
mm
Groove
width
a
mm
Overall
length
L
inches
Overall
length
L
mm
Overall
width
B
mm
Inside
length
I
mm
Inside
width
C
mm
Approx
weight
per 100 pcs
kg
A060004
A060005
A060006
4
5
6
4
5
6
1
1 1/4
1 1/2
25
31
37
19
22
29
16
22
26
11
16
19
0,4
0,8
1,4
A060007
7
7
1 3/4
44
32
32
22
2,0
A060008
A060009
8
9
8
9
2
2 1/4
51
57
38
42
34
38
24
29
2,8
3,0
A060010
10
10
2 1/2
64
44
42
32
4,8
A060012
12
12
3
76
57
51
38
8,0
A060016
16
16
3 1/2
89
64
60
42
15,0
A060018
18
18
4
102
69
67
45
22,0
A060020
20
20
4 1/2
115
79
76
51
25,0
A060022
22
22
5
127
89
83
54
32,0
A060024
24
24
5 1/2
140
102
88
64
46,0
A060026
26
26
6
152
105
102
68
66,0
A060030
30
30
7
178
121
115
79
80,0
Ref. no 600
22
...thimbles
Heavy Duty Stub-End Thimbles
- Material:
- Finish:
Mild Steel / Handelsstål
Galvanized / Galvanisert
Art.no
Dia rope
mm
Groove
width
a
mm
Overall
length
L
inches
Overall
length
L
mm
Inside
length
I
mm
Inside
width
C
mm
Back
thickness
S
mm
Approx
weight
per 100 pcs
kg
A060108
A060110
A060112
8
10
12
8
10
12
2
2 1/2
3
51
64
76
35
47
57
22
30
35
4
4
5
6
7
14
A060114
14
14
3 1/2
89
65
45
6
22
A060116
A060118
16
18
16
18
4
4 1/2
102
114
76
86
50
53
6
8
24
43
A060120
20
20
5
127
94
60
9
65
A060122
22
22
5 1/2
140
107
65
10
93
A060124
24
24
6
152
114
70
10
102
A060128
28
28
7
178
130
80
10,5
135
A060132
32
32
8
203
157
100
10,5
162
A060136
36
36
9
229
177
115
12
363
A060140
40
40
10
254
198
120
12
376
Ref. no 601
23
...eyebolts
Anja Eyebolt with collar
- Type:
- Threads:
- Material:
- Finish:
Small eye and collar, with or without large ring fitted in eye /
Lite øye og krage, leveres også med båtring montert i øyet
Machine thread or thread for wood / Maskingjenger eller tregjenger
Mild Steel / Handelsstål
Hot Dip Galvanized / Varmgalvanisert
Art.no
Size
Thread
A
B
C
D
E
T
L
Weight
100 pcs
Weight w/
ring
Packing
Ref. figure
Ref. figure
Ref. figure
M6
M8
M10
6
8
10
10
12
13
5
6
7
40
45
50
30
38
46
6
7
8
50
60
75
3
7
7
6
10
15
10
10
10
Ref. figure
M12
12
15
8
50
60
10
100
18
28
Ref. no 654
Ref. no 655
24
Ref. no 651
Ref. no 652
...notes
25
...stainless steel
Anja Stainless Steel Riggingscrews
- Type:
- Finish:
- Material:
Closed Body with stopnuts / Lukket hylse med stoppmuttere
Machined jaws / Maskinerte gafler
Aisi 316. Highly polished / Høyglanspolert
With two wide jaws / Med to brede gafler
Art.no
Size
UNF
Wire
mm
Length
body
B
Length
min
L1
Length
max
L2
Bolt
dia
D
Inside
jaw
A
M
A764806
A764808
A764810
1/4” - 6
5/16” - 8
3/8” - 10
3
4
5
90
100
115
145
165
195
210
240
270
6,0
8,0
9,5
7,8
9,1
10,1
12,5
14
17
F
Break
load
Kps
Weight
kg / 100
15
17
20
1 500
2 300
3 500
13
18
30
A764811
7/16” - 11
6
130
220
300
11,0
11,0
20
22
4 600
40
A764812
A764816
1/2” - 12
5/8” - 16
7-8
8-10
155
190
270
320
375
450
12,7
15,0
13,0
16,0
20
30
25
30
6 200
7 700
60
110
A764820
3/4” - 20
10-12
240
420
570
18,0
20,0
35
45
12 500
210
A764824
1” - 24
14-16
325
520
740
22,0
28,0
65
51
20 000
510
Ref. no 764
Anja Stainless Steel Riggingscrews Swage Terminals
- Material:
Art.no
A710806
A710808
A710810
Aisi 316. Highly polished / Høyglanspolert
Size
mm
Wire
mm
Outside
dia
D2
Inside
dia
D1
Inside
length
L
Jaw
Open
A
Bolt
dia
D
T
M
6
8
10
3
4
5
6,3
7,4
9,1
3,2
4,2
5,3
36
46
53
5,2
7,8
9,1
5,0
6,0
8,0
54
68
83
10
12,5
14
Weight
kg / 100
1
3
4
A710811
11
6
12,4
6,4
66
10,1
9,5
100
17
9
A710812
A710816
12
16
7
8
14,4
16,0
7,4
8,4
72
78
11,0
13,0
11,0
13,0
110
120
20
22
11
17
A710820
20
10
17,9
10,4
84
16,0
16,0
140
30
25
A710821
20
12
20,0
12,5
90
20,0
18,0
160
35
42
Ref. no 710
26
...stainless steel
Anja Stainless Steel Riggingscrews Swage Terminals
- Material:
Aisi 316. Highly polished / Høyglanspolert
Art.no
Size
UNF
mm
Wire
mm
Outside
dia
D2
Inside
dia
D1
Inside
length
L
Eye
open
D3
Eye
thickness
S
T
A711806
A711808
A711810
M6
M8
M10
3
4
5
6,3
7,5
9,0
3,5
4,4
5,3
38
45
51
6,5
8,5
10,5
4,0
5,0
6,0
55
67
76
Weight
kg / 100
Ref. no 711
1
3
4
A711811
M11
6
12,5
6,5
64
13,0
8,0
94
9
A711812
M12
7
14,2
7,5
70
13,0
9,0
104
11
A711816
M16
8
16,0
8,4
83
14,5
10,0
118
17
A711820
M20
10
17,8
10,5
89
16,3
11,0
142
25
Anja Stainless Steel Riggingscrews Swage Terminals
- Material:
Art.no
Aisi 316. Highly polished / Høyglanspolert
Size
UNF
mm
Wire
mm
Outside
dia
D2
Inside
dia
D1
Inside
length
L
Length
thread
L1
Length
total
L2
Weight
kg / 100
NV
A712806
A712808
A712810
1/4”
5/16”
3/8”
3
4
5
6,3
7,4
9,1
3,2
4,2
5,3
36
46
53
43
53
60
96
120
135
5
6
8
2
4
6
A712812
1/2”
7-8
14,4
7,4
72
80
175
12
13
A712816
5/8”
8-10
16,0
8,4
78
92
200
14
28
A712820
3/4”
10
17,9
10,4
84
114
225
16
35
A712821
3/4”
12
24,0
12,5
90
125
250
17
70
Ref. no 712
with metric threads
Art.no
Thread
metric
Wire
mm
Outside
dia
D2
Inside
dia
D1
Inside
length
L
Length
threads
L1
Length
total
L2
NV
A712906
A712908
A712910
M6
M8
M10
3
4
5
6,3
7,4
9,1
3,2
4,2
5,3
36
46
53
43
53
60
96
120
135
5
6
8
Weight
kg / 100
2
4
6
A712911
M11
6
12,4
6,4
66
70
155
11
8
A712912
M12
7
14,4
7,4
72
80
175
12
13
A712913
M12
8
16,0
8,4
80
90
200
14
13
A712916
M16
8
16,0
8,4
80
90
200
14
28
A712917
M16
10
17,9
10,4
90
100
220
15
28
A712920
M20
10
17,9
10,4
90
115
225
15
35
A712921
M20
12
20,0
12,5
108
115
245
17
55
27
...stainless steel
Anja Stainless Steel Dee Shackles
- Material:
- Finish:
Aisi 316
Highly polished / Høyglanspolert
Forged shackles to the utmost Quality and Performance / Smidde sjakler for fremragende kvalitet og sikkerhet
Note: Deformation load Appr. 2 x WLL / Deformasjonslast (flyt) ca 2 x WLL
Oversized pin from M16 / Overdimensjon pinn fra M16
Art.no
No 735
Art. no
No 730
Size
d1
d
a
c
A073004
A073005
A073006
M4
M5
M6
4,0
5,0
6,0
8
10
12
15
17
24
0,8
1,2
1,8
d2
MBL
Ton
WLL
Ton
Weight
kg / 100
1
2
4
A073008
M8
8,0
16
30
2,8
0,4
7
A073512
A073010
A073012
M10
M12
10,0
12,0
20
26
38
50
4,3
6,5
0,6
0,9
11
25
A073516
A073016
M16
13,0
24
52
33,0
12,0
1,5
40
* A073520
A073020
M20
16,0
28
65
40,0
16,0
2,5
60
A073522
A073022
M22
18,0
30
72
46,0
20,0
3,0
90
A073524
A073024
M25
19,0
32
78
48,0
28,0
4,0
110
A073530
A073030
M35
25,0
40
94
60,0
40,0
6,0
240
* Safety bolt Ø19
Større dimensjoner på forespørsel
Ref. no 735-D with safety bolt
Available sizes: M12 - M30
28
Ref. no 730-D with screw eye pin
Available sizes: M4 - M30
...stainless steel
Anja Stainless Steel Bow Shackles
- Material:
- Finish:
Aisi 316
Highly polished / Høyglanspolert
Forged shackles to the utmost Quality and Performance / Smidde sjakler for fremragende kvalitet og sikkerhet
Note: Deformation load Appr. 2 x WLL / Deformasjonslast (flyt) ca 2 x WLL
Oversized pin from M16 / Overdimensjon pinn fra M16
Art.no
No 755
A075512
Art. no
No 750
Size
d1
d
a
c
e
d2
MBL
kN
A075004
A075005
A075006
M4
M5
M6
4,0
5,0
6,0
8
10
12
18
18
22
13
15
17
9
10
12
8
12
18
WLL
kN
Weight
100 / pcs
1
2
4
A075008
M8
8,0
16
30
23
16
28
0,4
7
A075010
A075012
M10
M12
9,5
12,0
20
25
36
47
27
37
20
26
43
65
0,6
0,9
11
25
A075516
A075016
M16
13,0
25
47
33
33
110
1,5
37
* A075520
A075020
M20
16,0
28
60
42
40
150
2,5
65
A075522
A075022
M22
19,0
30
67
51
48
180
3,0
100
A075524
A075024
M25
22,0
36
84
57
52
250
4,0
170
A075530
A075030
M30
25,0
40
95
66
60
400
6,0
250
* Safety bolt Ø19
Større dimensjoner på forespørsel
Ref. no 755-H with safety bolt
Available sizes: M12 - M30
Ref. no 750-H with screw eye pin
Available sizes: M4 - M30
29
...stainless steel
Anja Stainless Steel 732 Shackles
- Material:
- Finish:
Aisi 316
Highly polished / Høyglanspolert
Forged shackles to the utmost Quality and Performance / Smidde sjakler for fremragende kvalitet og sikkerhet
Note: Deformation load Appr. 2 x WLL / Deformasjonslast (flyt) ca 2 x WLL
Art.no
Size
d1
d
a
c
MBL
Ton
WLL
Ton
Weigth
Kg / 100
A073216
A073217
A073220
16
16
20
13
16
16
24
32
28
52
64
65
12,0
16,0
2,0T
3,0T
3,0T
40
34
60
A073222
22
19
A073224
25
19
30
72
20,0
3,0T
90
32
78
28,0
4,0T
110
Ref. no 732
Anja Stainless Steel Forged Shackles
- Material:
- Finish:
Aisi 316
Highly polished / Høyglanspolert
Forged shackles to the utmost Quality and Performance / Smidde sjakler for fremragende kvalitet og sikkerhet
Art.no
Size
D1
A
C
A073104
A073105
A073106
M4
M5
M6
8
10
12
A073108
M8
16
- Material:
- Finish:
D
MBL
kN
Weigth
Kg / 100
28
36
42
4,0
5,0
6,0
8
12
18
1
2
4
56
8,0
28
9
Weigth
Kg / 100
2
4
9
Aisi 316
Highly polished / Høyglanspolert
Ref. no 741
Art.no
Size
D1
A
C
D
MBL
kN
A074105
A074106
A074108
M5
M6
M8
10
12
16
40
50
64
5,0
6,0
8,0
12
18
28
30
Ref. no 731
31
Gunnebo-Anja Industrier AS
5282 LONEVÅG
NORWAY
Tel: +47 56 19 33 00
Telefax: +47 56 19 33 10
E-mail: [email protected]
www.gunneboindustrier.no